All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To: cailiwei <cailiwei@hisilicon.com>
Cc: linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	guodong.xu@linaro.org, suzhuangluan@hisilicon.com,
	dengqingshan@hisilicon.com, xuhongtao8@hisilicon.com,
	zhengwanchun@hisilicon.com, shizongxuan@huawei.com
Subject: Re: [PATCH 1/8] fb: hisilicon: Add framebuffer driver for hi3660 SoC
Date: Wed, 08 Feb 2017 17:07:07 +0100	[thread overview]
Message-ID: <2996648.XhUWzz1aup@amdc3058> (raw)
In-Reply-To: <20170207023559.79455-1-cailiwei@hisilicon.com>


Hi,

I cannot merge this upstream as it was collectively
decided that there should be no new fbdev drivers
(DRM subsystem should be used instead).

[ You may consider submitting this driver to staging
  subsystem to make hardware usable by kernel while
  proper DRM driver is being developed. ]

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

On Tuesday, February 07, 2017 10:35:52 AM cailiwei wrote:
> From: Levy-Cai <cailiwei@hisilicon.com>
> 
> Add framebuffer driver for hi3660 SoC, this driver include lcd
> driver & Hdmi adv7533/adv7535 driver, support lcd display at
> 1080p@60 and hdmi display at 1080p@60.
> 
> Signed-off-by: cailiwei <cailiwei@hisilicon.com>
> ---
>  drivers/video/fbdev/Kconfig           | 11 ++++++++++
>  drivers/video/fbdev/Makefile          |  1 +
>  drivers/video/fbdev/hisi/Kconfig      |  6 +++++
>  drivers/video/fbdev/hisi/dss/Makefile | 41 +++++++++++++++++++++++++++++++++++
>  4 files changed, 59 insertions(+)
>  mode change 100644 => 100755 drivers/video/fbdev/Kconfig
>  mode change 100644 => 100755 drivers/video/fbdev/Makefile
>  create mode 100755 drivers/video/fbdev/hisi/Kconfig
>  create mode 100755 drivers/video/fbdev/hisi/dss/Makefile
> 
> diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
> old mode 100644
> new mode 100755
> index 5d3b0db5ce0a..85c46cc75908
> --- a/drivers/video/fbdev/Kconfig
> +++ b/drivers/video/fbdev/Kconfig
> @@ -2429,6 +2429,16 @@ config FB_HYPERV
>  	help
>  	  This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
>  
> +config FB_HISI
> +	tristate "Hisilicon Framebuffer support"
> +	depends on FB
> +	select FB_CFB_FILLRECT
> +	select FB_CFB_COPYAREA
> +	select FB_CFB_IMAGEBLIT
> +	select REGMAP
> +	help
> +	  This framebuffer driver supports Hisilicon FB.
> +
>  config FB_SIMPLE
>  	bool "Simple framebuffer support"
>  	depends on (FB = y)
> @@ -2448,6 +2458,7 @@ config FB_SIMPLE
>  source "drivers/video/fbdev/omap/Kconfig"
>  source "drivers/video/fbdev/omap2/Kconfig"
>  source "drivers/video/fbdev/mmp/Kconfig"
> +source "drivers/video/fbdev/hisi/Kconfig"
>  
>  config FB_SH_MOBILE_MERAM
>  	tristate "SuperH Mobile MERAM read ahead support"
> diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
> old mode 100644
> new mode 100755
> index ee8c81405a7f..a10d3d2793e3
> --- a/drivers/video/fbdev/Makefile
> +++ b/drivers/video/fbdev/Makefile
> @@ -23,6 +23,7 @@ obj-$(CONFIG_FB_I740)		  += i740fb.o
>  obj-$(CONFIG_FB_MATROX)		  += matrox/
>  obj-$(CONFIG_FB_RIVA)		  += riva/
>  obj-$(CONFIG_FB_NVIDIA)		  += nvidia/
> +obj-$(CONFIG_FB_HISI)             += hisi/dss/
>  obj-$(CONFIG_FB_ATY)		  += aty/ macmodes.o
>  obj-$(CONFIG_FB_ATY128)		  += aty/ macmodes.o
>  obj-$(CONFIG_FB_RADEON)		  += aty/
> diff --git a/drivers/video/fbdev/hisi/Kconfig b/drivers/video/fbdev/hisi/Kconfig
> new file mode 100755
> index 000000000000..c30747d52a38
> --- /dev/null
> +++ b/drivers/video/fbdev/hisi/Kconfig
> @@ -0,0 +1,6 @@
> +config HISI_FB_KIRIN960
> +	tristate "HISI FB KIRIN960 Framebuffer support"
> +	depends on FB_HISI
> +
> +	help
> +	  This framebuffer driver supports KIRIN960 FB.
> diff --git a/drivers/video/fbdev/hisi/dss/Makefile b/drivers/video/fbdev/hisi/dss/Makefile
> new file mode 100755
> index 000000000000..60004880dd80
> --- /dev/null
> +++ b/drivers/video/fbdev/hisi/dss/Makefile
> @@ -0,0 +1,41 @@
> +ifeq ($(CONFIG_HISI_FB_KIRIN960),y)
> +obj-$(CONFIG_HISI_FB_KIRIN960) := hisifb.o
> +endif
> +
> +hisifb-objs := \
> +	hisi_mipi_dsi_host.o \
> +	hisi_mipi_dsi.o \
> +	hisi_dpe.o \
> +	hisi_fb_panel.o \
> +	hisi_fb_isr.o \
> +	hisi_fb_vsync.o \
> +	hisi_fb_buf_sync.o \
> +	hisi_fb_bl.o \
> +	hisi_fb_utils.o \
> +	hisi_fb.o \
> +	hisi_overlay_utils.o \
> +	hisi_block_algorithm.o \
> +	hisi_overlay_online.o \
> +	hisi_overlay_cmdlist_utils.o
> +
> +ifeq ($(CONFIG_HISI_FB_KIRIN960),y)
> +hisifb-objs += \
> +	hisi_dpe_utils_hi3660.o \
> +	hisi_overlay_utils_hi3660.o \
> +	panel/mipi_hikey_nte300nts.o \
> +	hdmi/adv75xx.o \
> +	hdmi/mipi_adi_hdmi.o
> +endif
> +
> +EXTRA_CFLAGS += -Idrivers/video/hisi/dss \
> +		-Idrivers/video/hisi/panel \
> +		-Idrivers/video/hisi \
> +		-Iinclude \
> +		-Idrivers/staging/android
> +
> +ifeq ($(CONFIG_HISI_PERIDVFS),y)
> +EXTRA_CFLAGS += -Idrivers/clk/hisi/peri_dvfs
> +endif
> +
> +clean:
> +	rm *.o .*cmd

WARNING: multiple messages have this Message-ID (diff)
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To: cailiwei <cailiwei@hisilicon.com>
Cc: linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	guodong.xu@linaro.org, suzhuangluan@hisilicon.com,
	dengqingshan@hisilicon.com, xuhongtao8@hisilicon.com,
	zhengwanchun@hisilicon.com, shizongxuan@huawei.com
Subject: Re: [PATCH 1/8] fb: hisilicon: Add framebuffer driver for hi3660 SoC
Date: Wed, 08 Feb 2017 16:07:07 +0000	[thread overview]
Message-ID: <2996648.XhUWzz1aup@amdc3058> (raw)
In-Reply-To: <20170207023559.79455-1-cailiwei@hisilicon.com>


Hi,

I cannot merge this upstream as it was collectively
decided that there should be no new fbdev drivers
(DRM subsystem should be used instead).

[ You may consider submitting this driver to staging
  subsystem to make hardware usable by kernel while
  proper DRM driver is being developed. ]

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

On Tuesday, February 07, 2017 10:35:52 AM cailiwei wrote:
> From: Levy-Cai <cailiwei@hisilicon.com>
> 
> Add framebuffer driver for hi3660 SoC, this driver include lcd
> driver & Hdmi adv7533/adv7535 driver, support lcd display at
> 1080p@60 and hdmi display at 1080p@60.
> 
> Signed-off-by: cailiwei <cailiwei@hisilicon.com>
> ---
>  drivers/video/fbdev/Kconfig           | 11 ++++++++++
>  drivers/video/fbdev/Makefile          |  1 +
>  drivers/video/fbdev/hisi/Kconfig      |  6 +++++
>  drivers/video/fbdev/hisi/dss/Makefile | 41 +++++++++++++++++++++++++++++++++++
>  4 files changed, 59 insertions(+)
>  mode change 100644 => 100755 drivers/video/fbdev/Kconfig
>  mode change 100644 => 100755 drivers/video/fbdev/Makefile
>  create mode 100755 drivers/video/fbdev/hisi/Kconfig
>  create mode 100755 drivers/video/fbdev/hisi/dss/Makefile
> 
> diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
> old mode 100644
> new mode 100755
> index 5d3b0db5ce0a..85c46cc75908
> --- a/drivers/video/fbdev/Kconfig
> +++ b/drivers/video/fbdev/Kconfig
> @@ -2429,6 +2429,16 @@ config FB_HYPERV
>  	help
>  	  This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
>  
> +config FB_HISI
> +	tristate "Hisilicon Framebuffer support"
> +	depends on FB
> +	select FB_CFB_FILLRECT
> +	select FB_CFB_COPYAREA
> +	select FB_CFB_IMAGEBLIT
> +	select REGMAP
> +	help
> +	  This framebuffer driver supports Hisilicon FB.
> +
>  config FB_SIMPLE
>  	bool "Simple framebuffer support"
>  	depends on (FB = y)
> @@ -2448,6 +2458,7 @@ config FB_SIMPLE
>  source "drivers/video/fbdev/omap/Kconfig"
>  source "drivers/video/fbdev/omap2/Kconfig"
>  source "drivers/video/fbdev/mmp/Kconfig"
> +source "drivers/video/fbdev/hisi/Kconfig"
>  
>  config FB_SH_MOBILE_MERAM
>  	tristate "SuperH Mobile MERAM read ahead support"
> diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
> old mode 100644
> new mode 100755
> index ee8c81405a7f..a10d3d2793e3
> --- a/drivers/video/fbdev/Makefile
> +++ b/drivers/video/fbdev/Makefile
> @@ -23,6 +23,7 @@ obj-$(CONFIG_FB_I740)		  += i740fb.o
>  obj-$(CONFIG_FB_MATROX)		  += matrox/
>  obj-$(CONFIG_FB_RIVA)		  += riva/
>  obj-$(CONFIG_FB_NVIDIA)		  += nvidia/
> +obj-$(CONFIG_FB_HISI)             += hisi/dss/
>  obj-$(CONFIG_FB_ATY)		  += aty/ macmodes.o
>  obj-$(CONFIG_FB_ATY128)		  += aty/ macmodes.o
>  obj-$(CONFIG_FB_RADEON)		  += aty/
> diff --git a/drivers/video/fbdev/hisi/Kconfig b/drivers/video/fbdev/hisi/Kconfig
> new file mode 100755
> index 000000000000..c30747d52a38
> --- /dev/null
> +++ b/drivers/video/fbdev/hisi/Kconfig
> @@ -0,0 +1,6 @@
> +config HISI_FB_KIRIN960
> +	tristate "HISI FB KIRIN960 Framebuffer support"
> +	depends on FB_HISI
> +
> +	help
> +	  This framebuffer driver supports KIRIN960 FB.
> diff --git a/drivers/video/fbdev/hisi/dss/Makefile b/drivers/video/fbdev/hisi/dss/Makefile
> new file mode 100755
> index 000000000000..60004880dd80
> --- /dev/null
> +++ b/drivers/video/fbdev/hisi/dss/Makefile
> @@ -0,0 +1,41 @@
> +ifeq ($(CONFIG_HISI_FB_KIRIN960),y)
> +obj-$(CONFIG_HISI_FB_KIRIN960) := hisifb.o
> +endif
> +
> +hisifb-objs := \
> +	hisi_mipi_dsi_host.o \
> +	hisi_mipi_dsi.o \
> +	hisi_dpe.o \
> +	hisi_fb_panel.o \
> +	hisi_fb_isr.o \
> +	hisi_fb_vsync.o \
> +	hisi_fb_buf_sync.o \
> +	hisi_fb_bl.o \
> +	hisi_fb_utils.o \
> +	hisi_fb.o \
> +	hisi_overlay_utils.o \
> +	hisi_block_algorithm.o \
> +	hisi_overlay_online.o \
> +	hisi_overlay_cmdlist_utils.o
> +
> +ifeq ($(CONFIG_HISI_FB_KIRIN960),y)
> +hisifb-objs += \
> +	hisi_dpe_utils_hi3660.o \
> +	hisi_overlay_utils_hi3660.o \
> +	panel/mipi_hikey_nte300nts.o \
> +	hdmi/adv75xx.o \
> +	hdmi/mipi_adi_hdmi.o
> +endif
> +
> +EXTRA_CFLAGS += -Idrivers/video/hisi/dss \
> +		-Idrivers/video/hisi/panel \
> +		-Idrivers/video/hisi \
> +		-Iinclude \
> +		-Idrivers/staging/android
> +
> +ifeq ($(CONFIG_HISI_PERIDVFS),y)
> +EXTRA_CFLAGS += -Idrivers/clk/hisi/peri_dvfs
> +endif
> +
> +clean:
> +	rm *.o .*cmd


  parent reply	other threads:[~2017-02-08 16:41 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20170207024027epcas5p2528e797ee0c34cb60d97f0b659f4acbf@epcas5p2.samsung.com>
2017-02-07  2:35 ` [PATCH 1/8] fb: hisilicon: Add framebuffer driver for hi3660 SoC cailiwei
2017-02-07  2:35   ` cailiwei
2017-02-07  2:35   ` [PATCH 2/8] " cailiwei
2017-02-07  2:35     ` cailiwei
2017-02-07  2:35   ` [PATCH 3/8] " cailiwei
2017-02-07  2:35   ` [PATCH 4/8] " cailiwei
2017-02-07  2:35   ` [PATCH 5/8] " cailiwei
2017-02-07  2:35     ` cailiwei
2017-02-07  2:35   ` [PATCH 6/8] " cailiwei
2017-02-07  2:35     ` cailiwei
2017-02-07  2:35   ` [PATCH 7/8] " cailiwei
2017-02-07  2:35   ` [PATCH 8/8] " cailiwei
2017-02-07  2:35     ` cailiwei
2017-02-08 16:07   ` Bartlomiej Zolnierkiewicz [this message]
2017-02-08 16:07     ` [PATCH 1/8] " Bartlomiej Zolnierkiewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2996648.XhUWzz1aup@amdc3058 \
    --to=b.zolnierkie@samsung.com \
    --cc=cailiwei@hisilicon.com \
    --cc=dengqingshan@hisilicon.com \
    --cc=guodong.xu@linaro.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=shizongxuan@huawei.com \
    --cc=suzhuangluan@hisilicon.com \
    --cc=xuhongtao8@hisilicon.com \
    --cc=zhengwanchun@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.