* [U-Boot] Compiling the latest u-boot-2009.06 with Cross-2.95, and errors came out
[not found] <mailman.3291.1245991821.8190.u-boot@lists.denx.de>
@ 2009-06-26 8:55 ` Johnson Yu
2009-06-26 12:41 ` Detlev Zundel
2009-06-26 11:19 ` [U-Boot] Compiling the latest u-boot-2009.06 with Cross-2.95, null
1 sibling, 1 reply; 5+ messages in thread
From: Johnson Yu @ 2009-06-26 8:55 UTC (permalink / raw)
To: u-boot
Hi there,
I met several compiling errors as below:
make -C cpu/arm920t/at91rm9200/
make[1]: Entering directory
`/home/johnson-yn/GEARI/u-boot-2009.06/cpu/arm920t/at91rm9200'
arm-linux-gcc: lowlevel_init.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: bcm5221.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: dm9161.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: ether.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: i2c.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: interrupts.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: lxt972.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: usb.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: spi.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
make[1]: *** No rule to make target `.depend', needed by `all'. Stop.
make[1]: Leaving directory
`/home/johnson-yn/GEARI/u-boot-2009.06/cpu/arm920t/at91rm9200'
make: *** [cpu/arm920t/at91rm9200/libat91rm9200.a] Error 2
Is that possibly because of the version of the cross compiler?? and
should I raise it to cross 3.2 or higher to solve this problem??
Regards,
Johnson Yu
___________________________________________________________
Try the all-new Yahoo! Mail. "The New Version is radically easier to use" ? The Wall Street Journal
http://uk.docs.yahoo.com/nowyoucan.html
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] Compiling the latest u-boot-2009.06 with Cross-2.95,
[not found] <mailman.3291.1245991821.8190.u-boot@lists.denx.de>
2009-06-26 8:55 ` [U-Boot] Compiling the latest u-boot-2009.06 with Cross-2.95, and errors came out Johnson Yu
@ 2009-06-26 11:19 ` null
1 sibling, 0 replies; 5+ messages in thread
From: null @ 2009-06-26 11:19 UTC (permalink / raw)
To: u-boot
and errors came out
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary="----=_Part_326728_8299199.1246015197971"
X-Originating-IP: [221.237.65.45]
X-Priority: 3
X-Mailer: Coremail Webmail Server Version XT2_snapshot build
090513(7592.2351.2332) Copyright (c) 2002-2009 www.mailtech.cn 163com
------=_Part_326728_8299199.1246015197971
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
maybe you do not add these files in you makefile because of you have not de=
fine useful macros in you .h which is in ./include/config dir.
=E5=9C=A82009-06-26=EF=BC=8C"Johnson Yu" <johnson.yn83@yahoo.co.uk> =E5=86=
=99=E9=81=93=EF=BC=9A
Hi there,
I met several compiling errors as below:
make -C cpu/arm920t/at91rm9200/
make[1]: Entering directory=20
`/home/johnson-yn/GEARI/u-boot-2009.06/cpu/arm920t/at91rm9200'
arm-linux-gcc: lowlevel_init.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: bcm5221.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: dm9161.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: ether.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: i2c.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: interrupts.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: lxt972.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: usb.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: spi.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
make[1]: *** No rule to make target `.depend', needed by `all'. Stop.
make[1]: Leaving directory=20
`/home/johnson-yn/GEARI/u-boot-2009.06/cpu/arm920t/at91rm9200'
make: *** [cpu/arm920t/at91rm9200/libat91rm9200.a] Error 2
Is that possibly because of the version of the cross compiler?? and=20
should I raise it to cross 3.2 or higher to solve this problem??
Regards,
Johnson Yu
=09=09
___________________________________________________________=20
Try the all-new Yahoo! Mail. "The New Version is radically easier to use" =
=C2=96 The Wall Street Journal=20
http://uk.docs.yahoo.com/nowyoucan.html
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
------=_Part_326728_8299199.1246015197971
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
maybe you do not add these files in you makefile because of you have not de=
fine useful macros in you <board_name>.h which is in ./include/config dir.<=
br><br><br>=E5=9C=A82009-06-26=EF=BC=8C"Johnson Yu" <johnson.yn83 at yahoo.=
co.uk> =E5=86=99=E9=81=93=EF=BC=9A<br> <BLOCKQUOTE id=3D"isReplyContent"=
style=3D"PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1=
px solid"><PRE>Hi there,
I met several compiling errors as below:
make -C cpu/arm920t/at91rm9200/
make[1]: Entering directory=20
`/home/johnson-yn/GEARI/u-boot-2009.06/cpu/arm920t/at91rm9200'
arm-linux-gcc: lowlevel_init.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: bcm5221.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: dm9161.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: ether.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: i2c.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: interrupts.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: lxt972.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: usb.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: spi.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
make[1]: *** No rule to make target `.depend', needed by `all'. Stop.
make[1]: Leaving directory=20
`/home/johnson-yn/GEARI/u-boot-2009.06/cpu/arm920t/at91rm9200'
make: *** [cpu/arm920t/at91rm9200/libat91rm9200.a] Error 2
Is that possibly because of the version of the cross compiler?? and=20
should I raise it to cross 3.2 or higher to solve this problem??
Regards,
Johnson Yu
=09=09
___________________________________________________________=20
Try the all-new Yahoo! Mail. "The New Version is radically easier to use" =
=C2=96 The Wall Street Journal=20
http://uk.docs.yahoo.com/nowyoucan.html
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
</PRE></BLOCKQUOTE></board_name><br><!-- footer --><br><span title=3D"netea=
sefooter"/><hr/>
<a href=3D"http://count.mail.163.com/redirect/footer.htm?f=3Dhttp://gouwu.y=
oudao.com">200=E4=B8=87=E7=A7=8D=E5=95=86=E5=93=81,=E6=9C=80=E4=BD=8E=E4=BB=
=B7=E6=A0=BC,=E7=96=AF=E7=8B=82=E8=AF=B1=E6=83=91=E4=BD=A0</a>
</span>
------=_Part_326728_8299199.1246015197971--
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] Compiling the latest u-boot-2009.06 with Cross-2.95, and errors came out
2009-06-26 8:55 ` [U-Boot] Compiling the latest u-boot-2009.06 with Cross-2.95, and errors came out Johnson Yu
@ 2009-06-26 12:41 ` Detlev Zundel
2009-06-29 6:40 ` Johnson Yu
0 siblings, 1 reply; 5+ messages in thread
From: Detlev Zundel @ 2009-06-26 12:41 UTC (permalink / raw)
To: u-boot
Hi Johnson Y,
> I met several compiling errors as below:
>
> make -C cpu/arm920t/at91rm9200/
> make[1]: Entering directory
> `/home/johnson-yn/GEARI/u-boot-2009.06/cpu/arm920t/at91rm9200'
> arm-linux-gcc: lowlevel_init.o: No such file or directory
> arm-linux-gcc: unrecognized option `-MQ'
[...]
>
> Is that possibly because of the version of the cross compiler?? and
> should I raise it to cross 3.2 or higher to solve this problem??
The error message is clear - the U-Boot build uses an option which your
compiler does not understand. You have two ways of fixing this
1) upgrade your toolchain to a compiler understanding -MQ
2) "downgrade" the U-Boot buildprocess for your toolchain
I advise 1) as 2) invests time into something you will need to abandon
sometime anyhow.
Cheers
Detlev
--
Those who would trade safety for freedom deserve neither.
-- Thomas Jefferson
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] Compiling the latest u-boot-2009.06 with Cross-2.95, and errors came out
2009-06-26 12:41 ` Detlev Zundel
@ 2009-06-29 6:40 ` Johnson Yu
2009-06-29 11:39 ` Detlev Zundel
0 siblings, 1 reply; 5+ messages in thread
From: Johnson Yu @ 2009-06-29 6:40 UTC (permalink / raw)
To: u-boot
Hi Detlev Z,
Thanks for your suggestions, and after I upgraded the toolchain to v3.2,
those problems went away.
However, new errors turned up as expected:
1) the invocations of U_BOOT_CMD in several .c files, common/cmd_bootm.c
line 923, common/cmd_source.c line 232, common/cmd_ximg.c line 186
terminated the make process for the "unterminated argument list invoking
macro "U_BOOT_CMD" ", known as the "parse error". So, I set the last
argument of U_BOOT_CMD marco to NULL, and then make went silent.
2) this error came at the linking stage:
"arm-linux-ld:/home/johnson-yn/GEARI/u-boot-2009.06/board/atmel/at91rm9200dk/u-boot.lds:40:
parse error
make: *** [u-boot] Error 1"
and the line 40 of u-boot.lds is :
.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
how should I solve this?
If I just don't need use NAND flash module in u-boot, what are the steps
I should take??
Regards,
Johnson Yu
Detlev Zundel wrote:
> Hi Johnson Y,
>
>
>> I met several compiling errors as below:
>>
>> make -C cpu/arm920t/at91rm9200/
>> make[1]: Entering directory
>> `/home/johnson-yn/GEARI/u-boot-2009.06/cpu/arm920t/at91rm9200'
>> arm-linux-gcc: lowlevel_init.o: No such file or directory
>> arm-linux-gcc: unrecognized option `-MQ'
>>
>
> [...]
>
>
>> Is that possibly because of the version of the cross compiler?? and
>> should I raise it to cross 3.2 or higher to solve this problem??
>>
>
> The error message is clear - the U-Boot build uses an option which your
> compiler does not understand. You have two ways of fixing this
>
> 1) upgrade your toolchain to a compiler understanding -MQ
> 2) "downgrade" the U-Boot buildprocess for your toolchain
>
> I advise 1) as 2) invests time into something you will need to abandon
> sometime anyhow.
>
> Cheers
> Detlev
>
>
___________________________________________________________
Try the all-new Yahoo! Mail. "The New Version is radically easier to use" ? The Wall Street Journal
http://uk.docs.yahoo.com/nowyoucan.html
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] Compiling the latest u-boot-2009.06 with Cross-2.95, and errors came out
2009-06-29 6:40 ` Johnson Yu
@ 2009-06-29 11:39 ` Detlev Zundel
0 siblings, 0 replies; 5+ messages in thread
From: Detlev Zundel @ 2009-06-29 11:39 UTC (permalink / raw)
To: u-boot
Hi Johnson Yu,
> Hi Detlev Z,
>
>
> Thanks for your suggestions, and after I upgraded the toolchain to
> v3.2, those problems went away.
Why did you upgrade only to 3.2? We are currently using gcc-4.2.2. You
are welcome to download ELDK 4.2 for arm[1] and give it a try.
> However, new errors turned up as expected:
You expected new errors? Uh uh, I was hoping for them to go away ;)
> 1) the invocations of U_BOOT_CMD in several .c files,
> common/cmd_bootm.c line 923, common/cmd_source.c line 232,
> common/cmd_ximg.c line 186 terminated the make process for the
> "unterminated argument list invoking macro "U_BOOT_CMD" ", known as
> the "parse error". So, I set the last argument of U_BOOT_CMD marco to
> NULL, and then make went silent.
I don't understand this. include/common.h defines U_BOOT_CMD to take 6
parameters. Your example common/cmd_boot.c also provides 6 parameters:
U_BOOT_CMD(
bootm, CONFIG_SYS_MAXARGS, 1, do_bootm,
"boot application image from memory",
"[addr [arg ...]]\n - boot application image stored in memory\n"
"\tpassing arguments 'arg ...'; when booting a Linux kernel,\n"
...... [more concatenations below this point]
So I count 4 parameters on the first line, 1 parameter on the next and
the 6th parameter is the long list of concatenated strings.
Why should you need to add another parameter here?
> 2) this error came at the linking stage:
>
> "arm-linux-ld:/home/johnson-yn/GEARI/u-boot-2009.06/board/atmel/at91rm9200dk/u-boot.lds:40:
> parse error
> make: *** [u-boot] Error 1"
>
> and the line 40 of u-boot.lds is :
>
> .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
>
> how should I solve this?
The easiest way would be to upgrade to a _recent_ toolchain (i.e. >4).
On the other hand, the line you mention was added in this commit:
http://git.denx.de/?p=u-boot.git;a=commit;h=f62fb99941c625605aa16a0097b396a5c16d2c88
If you check the commit msg, you get an idea of how you may "unwind"
this optimization.
However, why invest time, if a recent toolchain "just works"?
> If I just don't need use NAND flash module in u-boot, what are the
> steps I should take??
It should be enough to #undef CONFIG_CMD_NAND in the config file.
Cheers
Detlev
[1] http://www.denx.de/wiki/view/DULG/ELDKDownload?stickboard=qong
--
14474011154664524427946373126085988481573677491474835889066354349131199152128
If you know why this number is perfect - you're probably a mathematician...
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2009-06-29 11:39 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <mailman.3291.1245991821.8190.u-boot@lists.denx.de>
2009-06-26 8:55 ` [U-Boot] Compiling the latest u-boot-2009.06 with Cross-2.95, and errors came out Johnson Yu
2009-06-26 12:41 ` Detlev Zundel
2009-06-29 6:40 ` Johnson Yu
2009-06-29 11:39 ` Detlev Zundel
2009-06-26 11:19 ` [U-Boot] Compiling the latest u-boot-2009.06 with Cross-2.95, null
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.