* [Buildroot] [PATCH] Microblaze: Improvements in the build system
@ 2012-04-20 16:18 Stephan Hoffmann
2012-04-28 16:17 ` Arnout Vandecappelle
0 siblings, 1 reply; 5+ messages in thread
From: Stephan Hoffmann @ 2012-04-20 16:18 UTC (permalink / raw)
To: buildroot
1. Added BR2_LINUX_KERNEL_SIMPLEIMAGE
2. Removed DTS dependence from Microblaze
3. Updated defconfig files
Signed-off by: Stephan Hoffmann <sho@relinux.de>
---
I already mailed this patch on April 8, but it obviously did not get over the list;-(
configs/qemu_microblazebe_mmu_defconfig | 6 -----
configs/qemu_microblazeel_mmu_defconfig | 7 ------
configs/s6lx9_microboard_defconfig | 10 +--------
linux/Config.in | 14 ++++++++---
linux/linux.mk | 35 +++++++++++++++++++-----------
5 files changed, 33 insertions(+), 39 deletions(-)
diff --git a/configs/qemu_microblazebe_mmu_defconfig b/configs/qemu_microblazebe_mmu_defconfig
index 378e972..3bac1ea 100644
--- a/configs/qemu_microblazebe_mmu_defconfig
+++ b/configs/qemu_microblazebe_mmu_defconfig
@@ -1,10 +1,4 @@
-BR2_microblaze=y
BR2_microblazebe=y
-BR2_TOOLCHAIN_EXTERNAL=y
-BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2=y
-BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
-BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
-BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
diff --git a/configs/qemu_microblazeel_mmu_defconfig b/configs/qemu_microblazeel_mmu_defconfig
index 61420b4..9d8ec8b 100644
--- a/configs/qemu_microblazeel_mmu_defconfig
+++ b/configs/qemu_microblazeel_mmu_defconfig
@@ -1,11 +1,4 @@
-BR2_microblaze=y
BR2_microblazeel=y
-BR2_TOOLCHAIN_EXTERNAL=y
-BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2=y
-BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
-BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="microblazeel-unknown-linux-gnu"
-BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
-BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
diff --git a/configs/s6lx9_microboard_defconfig b/configs/s6lx9_microboard_defconfig
index 5011766..35d12eb 100644
--- a/configs/s6lx9_microboard_defconfig
+++ b/configs/s6lx9_microboard_defconfig
@@ -1,11 +1,4 @@
-BR2_microblaze=y
BR2_microblazeel=y
-BR2_TOOLCHAIN_EXTERNAL=y
-BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2=y
-BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
-BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="microblazeel-unknown-linux-gnu"
-BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
-BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
@@ -13,5 +6,4 @@ BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/avnet/s6lx9_microboard/lx9_mmu_defconfig"
BR2_LINUX_KERNEL_DTS_FILE="board/avnet/s6lx9_microboard/lx9_mmu.dts"
-BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
-BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="simpleImage.lx9_mmu"
+BR2_LINUX_KERNEL_SIMPLEIMAGE=y
diff --git a/linux/Config.in b/linux/Config.in
index 5a2d287..e69451b 100644
--- a/linux/Config.in
+++ b/linux/Config.in
@@ -122,12 +122,8 @@ config BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE
config BR2_LINUX_KERNEL_DTS_FILE
string "Device Tree dts file location"
- depends on BR2_microblaze
help
Path from where the dts file has to be copied
- The final "custom target" name depends on the
- dts file name:
- <name>.dts --> simpleImage.<name>
#
# Binary format
#
@@ -158,6 +154,16 @@ config BR2_LINUX_KERNEL_VMLINUZ
bool "vmlinuz"
depends on BR2_mips || BR2_mipsel
+config BR2_LINUX_KERNEL_SIMPLEIMAGE
+ bool "simpleImage"
+ help
+ simpleImage is the image format used for the
+ Microblaze softcore processor.
+
+ The final image name depends on the
+ dts file name:
+ <name>.dts --> simpleImage.<name>
+
config BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM
bool "custom target"
help
diff --git a/linux/linux.mk b/linux/linux.mk
index 16f9916..3e22f5e 100644
--- a/linux/linux.mk
+++ b/linux/linux.mk
@@ -46,6 +46,18 @@ LINUX_MAKE_FLAGS = \
# going to be installed in the target filesystem.
LINUX_VERSION_PROBED = $(shell $(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) --no-print-directory -s kernelrelease)
+# Copy the DTS file into the kernel's dts directory
+# This is at least needed for Microblaze since the kernel build system links it into the kernel image
+ifneq ($(BR2_LINUX_KERNEL_DTS_FILE),)
+ LINUX_KERNEL_CUSTOM_DTS = $(call qstrip, $(BR2_LINUX_KERNEL_DTS_FILE))
+ DTS_NAME = $(shell export file=`basename $(LINUX_KERNEL_CUSTOM_DTS)` && echo $${file%.*})
+ define LINUX_COPY_DTS
+ echo "LINUX_KERNEL_CUSTOM_DTS=$(LINUX_KERNEL_CUSTOM_DTS) and DTS_NAME=$(DTS_NAME)" && \
+ mkdir -p $(KERNEL_ARCH_PATH)/boot/dts && \
+ cp $(BR2_LINUX_KERNEL_DTS_FILE) $(KERNEL_ARCH_PATH)/boot/dts/
+ endef
+endif
+
ifeq ($(BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM),y)
LINUX_IMAGE_NAME=$(call qstrip,$(BR2_LINUX_KERNEL_IMAGE_TARGET_NAME))
else
@@ -57,6 +69,9 @@ else
LINUX_IMAGE_NAME=uImage
endif
LINUX_DEPENDENCIES+=host-uboot-tools
+else ifeq ($(BR2_LINUX_KERNEL_SIMPLEIMAGE),y)
+LINUX_IMAGE_NAME=simpleImage.$(DTS_NAME)
+LINUX_DEPENDENCIES+=host-uboot-tools
else ifeq ($(BR2_LINUX_KERNEL_BZIMAGE),y)
LINUX_IMAGE_NAME=bzImage
else ifeq ($(BR2_LINUX_KERNEL_ZIMAGE),y)
@@ -90,10 +105,15 @@ else
ifeq ($(KERNEL_ARCH),avr32)
LINUX_IMAGE_PATH=$(KERNEL_ARCH_PATH)/boot/images/$(LINUX_IMAGE_NAME)
else
+ifeq ($(BR2_LINUX_KERNEL_SIMPLEIMAGE),y)
+LINUX_IMAGE_PATH=$(KERNEL_ARCH_PATH)/boot/$(LINUX_IMAGE_NAME).ub
+else
LINUX_IMAGE_PATH=$(KERNEL_ARCH_PATH)/boot/$(LINUX_IMAGE_NAME)
endif
+endif
endif # BR2_LINUX_KERNEL_VMLINUX
+
define LINUX_DOWNLOAD_PATCHES
$(if $(LINUX_PATCHES),
@$(call MESSAGE,"Download additional patches"))
@@ -117,17 +137,9 @@ endef
LINUX_POST_PATCH_HOOKS += LINUX_APPLY_PATCHES
+# The microblaze build system always wants mkimage
ifeq ($(KERNEL_ARCH),microblaze)
-# on microblaze, we always want mkimage
LINUX_DEPENDENCIES+=host-uboot-tools
-
-define LINUX_COPY_DTS
- if test -f "$(BR2_LINUX_KERNEL_DTS_FILE)" ; then \
- cp $(BR2_LINUX_KERNEL_DTS_FILE) $(@D)/arch/microblaze/boot/dts ; \
- else \
- echo "Cannot copy dts file!" ; \
- fi
-endef
endif
ifeq ($(BR2_LINUX_KERNEL_USE_DEFCONFIG),y)
@@ -143,8 +155,7 @@ define LINUX_CONFIGURE_CMDS
$(if $(BR2_ARM_EABI),
$(call KCONFIG_ENABLE_OPT,CONFIG_AEABI,$(@D)/.config),
$(call KCONFIG_DISABLE_OPT,CONFIG_AEABI,$(@D)/.config))
- $(if $(BR2_microblaze),
- $(call LINUX_COPY_DTS))
+ $(call LINUX_COPY_DTS)
# As the kernel gets compiled before root filesystems are
# built, we create a fake cpio file. It'll be
# replaced later by the real cpio archive, and the kernel will be
@@ -231,8 +242,6 @@ $(LINUX_DIR)/.stamp_initramfs_rebuilt: $(LINUX_DIR)/.stamp_target_installed $(LI
$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_IMAGE_NAME)
# Copy the kernel image to its final destination
cp $(LINUX_IMAGE_PATH) $(BINARIES_DIR)
- # If there is a .ub file copy it to the final destination
- test ! -f $(LINUX_IMAGE_PATH).ub || cp $(LINUX_IMAGE_PATH).ub $(BINARIES_DIR)
$(Q)touch $@
# The initramfs building code must make sure this target gets called
--
1.7.0.4
--
reLinux - Stephan Hoffmann
Am Schmidtgrund 124 50765 K?ln
Tel. +49.221.95595-19 Fax: -64
www.reLinux.de sho at reLinux.de
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] Microblaze: Improvements in the build system
2012-04-20 16:18 [Buildroot] [PATCH] Microblaze: Improvements in the build system Stephan Hoffmann
@ 2012-04-28 16:17 ` Arnout Vandecappelle
2012-05-01 14:13 ` Stephan Hoffmann
0 siblings, 1 reply; 5+ messages in thread
From: Arnout Vandecappelle @ 2012-04-28 16:17 UTC (permalink / raw)
To: buildroot
On Friday 20 April 2012 18:18:05 Stephan Hoffmann wrote:
[snip]
> diff --git a/configs/qemu_microblazebe_mmu_defconfig b/configs/qemu_microblazebe_mmu_defconfig
> index 378e972..3bac1ea 100644
> --- a/configs/qemu_microblazebe_mmu_defconfig
> +++ b/configs/qemu_microblazebe_mmu_defconfig
> @@ -1,10 +1,4 @@
> -BR2_microblaze=y
> BR2_microblazebe=y
> -BR2_TOOLCHAIN_EXTERNAL=y
> -BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2=y
> -BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
> -BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
> -BR2_TOOLCHAIN_EXTERNAL_CXX=y
I just noticed now: the definition of the Xilinx toolchain doesn't specify
that it includes C++ (BR2_INSTALL_LIBSTDCPP) or that it is a glibc toolchain.
These things should be select'ed by the
BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2 config.
[snip]
> +config BR2_LINUX_KERNEL_SIMPLEIMAGE
> + bool "simpleImage"
> + help
> + simpleImage is the image format used for the
> + Microblaze softcore processor.
> +
> + The final image name depends on the
> + dts file name:
> + <name>.dts --> simpleImage.<name>
> +
This one should depend on microblaze.
It should also depend on BR2_LINUX_KERNEL_DTS_FILE being defined:
depends on BR2_LINUX_KERNEL_DTS_FILE != ""
However, if I understand correctly, the simpleImage is always
built for microblaze and it is the only image format available.
In that case, perhaps it's better to remove the option completely,
or to replace it with a hidden option:
config BR2_LINUX_KERNEL_SIMPLEIMAGE
bool
default y if BR2_microblaze
> config BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM
> bool "custom target"
> help
> diff --git a/linux/linux.mk b/linux/linux.mk
> index 16f9916..3e22f5e 100644
> --- a/linux/linux.mk
> +++ b/linux/linux.mk
> @@ -46,6 +46,18 @@ LINUX_MAKE_FLAGS = \
> # going to be installed in the target filesystem.
> LINUX_VERSION_PROBED = $(shell $(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) --no-print-directory -s kernelrelease)
>
> +# Copy the DTS file into the kernel's dts directory
> +# This is at least needed for Microblaze since the kernel build system links it into the kernel image
> +ifneq ($(BR2_LINUX_KERNEL_DTS_FILE),)
This won't work. If the definition is empty, it will be "" so the
condition is still true. You have to strip it first.
> + LINUX_KERNEL_CUSTOM_DTS = $(call qstrip, $(BR2_LINUX_KERNEL_DTS_FILE))
It's more consistent if you use LINUX_KERNEL_DTS_FILE for the stripped
variable.
> + DTS_NAME = $(shell export file=`basename $(LINUX_KERNEL_CUSTOM_DTS)` && echo $${file%.*})
Avoid $(shell), especially if you can do it with make functions. You
probably want
DTS_NAME = $(patsubst %.dts,%,$(notdir $(LINUX_KERNEL_CUSTOM_DTS)))
> + define LINUX_COPY_DTS
> + echo "LINUX_KERNEL_CUSTOM_DTS=$(LINUX_KERNEL_CUSTOM_DTS) and DTS_NAME=$(DTS_NAME)" && \
> + mkdir -p $(KERNEL_ARCH_PATH)/boot/dts && \
> + cp $(BR2_LINUX_KERNEL_DTS_FILE) $(KERNEL_ARCH_PATH)/boot/dts/
There is no need to connect the commands with && here. You can just
put them on individual lines. If one of them fails, the build will be aborted.
The echo is redundant if you ask me. If you do put it, add a @ in front.
Before copying, you should probably remove the target file first (in case
the already existing file is a symlink).
> + endef
> +endif
> +
> ifeq ($(BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM),y)
> LINUX_IMAGE_NAME=$(call qstrip,$(BR2_LINUX_KERNEL_IMAGE_TARGET_NAME))
> else
> @@ -57,6 +69,9 @@ else
> LINUX_IMAGE_NAME=uImage
> endif
> LINUX_DEPENDENCIES+=host-uboot-tools
> +else ifeq ($(BR2_LINUX_KERNEL_SIMPLEIMAGE),y)
> +LINUX_IMAGE_NAME=simpleImage.$(DTS_NAME)
> +LINUX_DEPENDENCIES+=host-uboot-tools
Please put spaces around the assignments, even though the surrounding
code doesn't follow the standard.
> else ifeq ($(BR2_LINUX_KERNEL_BZIMAGE),y)
> LINUX_IMAGE_NAME=bzImage
> else ifeq ($(BR2_LINUX_KERNEL_ZIMAGE),y)
> @@ -90,10 +105,15 @@ else
> ifeq ($(KERNEL_ARCH),avr32)
> LINUX_IMAGE_PATH=$(KERNEL_ARCH_PATH)/boot/images/$(LINUX_IMAGE_NAME)
> else
> +ifeq ($(BR2_LINUX_KERNEL_SIMPLEIMAGE),y)
> +LINUX_IMAGE_PATH=$(KERNEL_ARCH_PATH)/boot/$(LINUX_IMAGE_NAME).ub
> +else
> LINUX_IMAGE_PATH=$(KERNEL_ARCH_PATH)/boot/$(LINUX_IMAGE_NAME)
> endif
> +endif
> endif # BR2_LINUX_KERNEL_VMLINUX
>
> +
> define LINUX_DOWNLOAD_PATCHES
> $(if $(LINUX_PATCHES),
> @$(call MESSAGE,"Download additional patches"))
> @@ -117,17 +137,9 @@ endef
>
> LINUX_POST_PATCH_HOOKS += LINUX_APPLY_PATCHES
>
> +# The microblaze build system always wants mkimage
> ifeq ($(KERNEL_ARCH),microblaze)
> -# on microblaze, we always want mkimage
> LINUX_DEPENDENCIES+=host-uboot-tools
You already have this above in the BR2_LINUX_KERNEL_SIMPLEIMAGE
condition. It makes much more sense there than it does here.
> -
> -define LINUX_COPY_DTS
> - if test -f "$(BR2_LINUX_KERNEL_DTS_FILE)" ; then \
> - cp $(BR2_LINUX_KERNEL_DTS_FILE) $(@D)/arch/microblaze/boot/dts ; \
> - else \
> - echo "Cannot copy dts file!" ; \
> - fi
> -endef
> endif
>
> ifeq ($(BR2_LINUX_KERNEL_USE_DEFCONFIG),y)
> @@ -143,8 +155,7 @@ define LINUX_CONFIGURE_CMDS
> $(if $(BR2_ARM_EABI),
> $(call KCONFIG_ENABLE_OPT,CONFIG_AEABI,$(@D)/.config),
> $(call KCONFIG_DISABLE_OPT,CONFIG_AEABI,$(@D)/.config))
> - $(if $(BR2_microblaze),
> - $(call LINUX_COPY_DTS))
> + $(call LINUX_COPY_DTS)
No need for a call here, just $(LINUX_COPY_DTS). And check the
indentation (one tab).
> # As the kernel gets compiled before root filesystems are
> # built, we create a fake cpio file. It'll be
> # replaced later by the real cpio archive, and the kernel will be
> @@ -231,8 +242,6 @@ $(LINUX_DIR)/.stamp_initramfs_rebuilt: $(LINUX_DIR)/.stamp_target_installed $(LI
> $(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_IMAGE_NAME)
> # Copy the kernel image to its final destination
> cp $(LINUX_IMAGE_PATH) $(BINARIES_DIR)
> - # If there is a .ub file copy it to the final destination
> - test ! -f $(LINUX_IMAGE_PATH).ub || cp $(LINUX_IMAGE_PATH).ub $(BINARIES_DIR)
> $(Q)touch $@
>
> # The initramfs building code must make sure this target gets called
>
Even though I made a lot of comments here, it definitely looks like
an improvement!
Regards,
Arnout
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286540
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] Microblaze: Improvements in the build system
2012-04-28 16:17 ` Arnout Vandecappelle
@ 2012-05-01 14:13 ` Stephan Hoffmann
2012-05-01 14:52 ` Peter Korsgaard
0 siblings, 1 reply; 5+ messages in thread
From: Stephan Hoffmann @ 2012-05-01 14:13 UTC (permalink / raw)
To: buildroot
Am 28.04.2012 18:17, schrieb Arnout Vandecappelle:
> Even though I made a lot of comments here, it definitely looks like
> an improvement!
>
> Regards,
> Arnout
>
Thanks for your constructive comments. I will see when I have time to
implement them. But that isn't much likely in time for the upcoming
2012.05 release;-(
Kind regards
Stephan
--
reLinux - Stephan Hoffmann
Am Schmidtgrund 124 50765 K?ln
Tel. +49.221.95595-19 Fax: -64
www.reLinux.de sho at reLinux.de
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] Microblaze: Improvements in the build system
2012-05-01 14:13 ` Stephan Hoffmann
@ 2012-05-01 14:52 ` Peter Korsgaard
0 siblings, 0 replies; 5+ messages in thread
From: Peter Korsgaard @ 2012-05-01 14:52 UTC (permalink / raw)
To: buildroot
>>>>> "Stephan" == Stephan Hoffmann <sho@relinux.de> writes:
Stephan> Am 28.04.2012 18:17, schrieb Arnout Vandecappelle:
>> Even though I made a lot of comments here, it definitely looks like
>> an improvement!
>>
>> Regards,
>> Arnout
>>
Stephan> Thanks for your constructive comments. I will see when I have time to
Stephan> implement them. But that isn't much likely in time for the upcoming
Stephan> 2012.05 release;-(
Indeed. I hope to release -rc1 this week, after which I will only accept
bugfixes for 2012.05.
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] Microblaze: Improvements in the build system
@ 2012-04-08 16:47 Stephan Hoffmann
0 siblings, 0 replies; 5+ messages in thread
From: Stephan Hoffmann @ 2012-04-08 16:47 UTC (permalink / raw)
To: buildroot
1. Added BR2_LINUX_KERNEL_SIMPLEIMAGE
2. Removed DTS dependence from Microblaze
3. Updated defconfig files
Signed-off by: Stephan Hoffmann <sho@relinux.de>
---
configs/qemu_microblazebe_mmu_defconfig | 6 -----
configs/qemu_microblazeel_mmu_defconfig | 7 ------
configs/s6lx9_microboard_defconfig | 10 +--------
linux/Config.in | 14 ++++++++---
linux/linux.mk | 35 +++++++++++++++++++-----------
5 files changed, 33 insertions(+), 39 deletions(-)
diff --git a/configs/qemu_microblazebe_mmu_defconfig b/configs/qemu_microblazebe_mmu_defconfig
index 378e972..3bac1ea 100644
--- a/configs/qemu_microblazebe_mmu_defconfig
+++ b/configs/qemu_microblazebe_mmu_defconfig
@@ -1,10 +1,4 @@
-BR2_microblaze=y
BR2_microblazebe=y
-BR2_TOOLCHAIN_EXTERNAL=y
-BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2=y
-BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
-BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
-BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
diff --git a/configs/qemu_microblazeel_mmu_defconfig b/configs/qemu_microblazeel_mmu_defconfig
index 61420b4..9d8ec8b 100644
--- a/configs/qemu_microblazeel_mmu_defconfig
+++ b/configs/qemu_microblazeel_mmu_defconfig
@@ -1,11 +1,4 @@
-BR2_microblaze=y
BR2_microblazeel=y
-BR2_TOOLCHAIN_EXTERNAL=y
-BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2=y
-BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
-BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="microblazeel-unknown-linux-gnu"
-BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
-BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
diff --git a/configs/s6lx9_microboard_defconfig b/configs/s6lx9_microboard_defconfig
index 5011766..35d12eb 100644
--- a/configs/s6lx9_microboard_defconfig
+++ b/configs/s6lx9_microboard_defconfig
@@ -1,11 +1,4 @@
-BR2_microblaze=y
BR2_microblazeel=y
-BR2_TOOLCHAIN_EXTERNAL=y
-BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2=y
-BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
-BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="microblazeel-unknown-linux-gnu"
-BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
-BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
@@ -13,5 +6,4 @@ BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/avnet/s6lx9_microboard/lx9_mmu_defconfig"
BR2_LINUX_KERNEL_DTS_FILE="board/avnet/s6lx9_microboard/lx9_mmu.dts"
-BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
-BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="simpleImage.lx9_mmu"
+BR2_LINUX_KERNEL_SIMPLEIMAGE=y
diff --git a/linux/Config.in b/linux/Config.in
index 5a2d287..e69451b 100644
--- a/linux/Config.in
+++ b/linux/Config.in
@@ -122,12 +122,8 @@ config BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE
config BR2_LINUX_KERNEL_DTS_FILE
string "Device Tree dts file location"
- depends on BR2_microblaze
help
Path from where the dts file has to be copied
- The final "custom target" name depends on the
- dts file name:
- <name>.dts --> simpleImage.<name>
#
# Binary format
#
@@ -158,6 +154,16 @@ config BR2_LINUX_KERNEL_VMLINUZ
bool "vmlinuz"
depends on BR2_mips || BR2_mipsel
+config BR2_LINUX_KERNEL_SIMPLEIMAGE
+ bool "simpleImage"
+ help
+ simpleImage is the image format used for the
+ Microblaze softcore processor.
+
+ The final image name depends on the
+ dts file name:
+ <name>.dts --> simpleImage.<name>
+
config BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM
bool "custom target"
help
diff --git a/linux/linux.mk b/linux/linux.mk
index 16f9916..3e22f5e 100644
--- a/linux/linux.mk
+++ b/linux/linux.mk
@@ -46,6 +46,18 @@ LINUX_MAKE_FLAGS = \
# going to be installed in the target filesystem.
LINUX_VERSION_PROBED = $(shell $(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) --no-print-directory -s kernelrelease)
+# Copy the DTS file into the kernel's dts directory
+# This is at least needed for Microblaze since the kernel build system links it into the kernel image
+ifneq ($(BR2_LINUX_KERNEL_DTS_FILE),)
+ LINUX_KERNEL_CUSTOM_DTS = $(call qstrip, $(BR2_LINUX_KERNEL_DTS_FILE))
+ DTS_NAME = $(shell export file=`basename $(LINUX_KERNEL_CUSTOM_DTS)` && echo $${file%.*})
+ define LINUX_COPY_DTS
+ echo "LINUX_KERNEL_CUSTOM_DTS=$(LINUX_KERNEL_CUSTOM_DTS) and DTS_NAME=$(DTS_NAME)" && \
+ mkdir -p $(KERNEL_ARCH_PATH)/boot/dts && \
+ cp $(BR2_LINUX_KERNEL_DTS_FILE) $(KERNEL_ARCH_PATH)/boot/dts/
+ endef
+endif
+
ifeq ($(BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM),y)
LINUX_IMAGE_NAME=$(call qstrip,$(BR2_LINUX_KERNEL_IMAGE_TARGET_NAME))
else
@@ -57,6 +69,9 @@ else
LINUX_IMAGE_NAME=uImage
endif
LINUX_DEPENDENCIES+=host-uboot-tools
+else ifeq ($(BR2_LINUX_KERNEL_SIMPLEIMAGE),y)
+LINUX_IMAGE_NAME=simpleImage.$(DTS_NAME)
+LINUX_DEPENDENCIES+=host-uboot-tools
else ifeq ($(BR2_LINUX_KERNEL_BZIMAGE),y)
LINUX_IMAGE_NAME=bzImage
else ifeq ($(BR2_LINUX_KERNEL_ZIMAGE),y)
@@ -90,10 +105,15 @@ else
ifeq ($(KERNEL_ARCH),avr32)
LINUX_IMAGE_PATH=$(KERNEL_ARCH_PATH)/boot/images/$(LINUX_IMAGE_NAME)
else
+ifeq ($(BR2_LINUX_KERNEL_SIMPLEIMAGE),y)
+LINUX_IMAGE_PATH=$(KERNEL_ARCH_PATH)/boot/$(LINUX_IMAGE_NAME).ub
+else
LINUX_IMAGE_PATH=$(KERNEL_ARCH_PATH)/boot/$(LINUX_IMAGE_NAME)
endif
+endif
endif # BR2_LINUX_KERNEL_VMLINUX
+
define LINUX_DOWNLOAD_PATCHES
$(if $(LINUX_PATCHES),
@$(call MESSAGE,"Download additional patches"))
@@ -117,17 +137,9 @@ endef
LINUX_POST_PATCH_HOOKS += LINUX_APPLY_PATCHES
+# The microblaze build system always wants mkimage
ifeq ($(KERNEL_ARCH),microblaze)
-# on microblaze, we always want mkimage
LINUX_DEPENDENCIES+=host-uboot-tools
-
-define LINUX_COPY_DTS
- if test -f "$(BR2_LINUX_KERNEL_DTS_FILE)" ; then \
- cp $(BR2_LINUX_KERNEL_DTS_FILE) $(@D)/arch/microblaze/boot/dts ; \
- else \
- echo "Cannot copy dts file!" ; \
- fi
-endef
endif
ifeq ($(BR2_LINUX_KERNEL_USE_DEFCONFIG),y)
@@ -143,8 +155,7 @@ define LINUX_CONFIGURE_CMDS
$(if $(BR2_ARM_EABI),
$(call KCONFIG_ENABLE_OPT,CONFIG_AEABI,$(@D)/.config),
$(call KCONFIG_DISABLE_OPT,CONFIG_AEABI,$(@D)/.config))
- $(if $(BR2_microblaze),
- $(call LINUX_COPY_DTS))
+ $(call LINUX_COPY_DTS)
# As the kernel gets compiled before root filesystems are
# built, we create a fake cpio file. It'll be
# replaced later by the real cpio archive, and the kernel will be
@@ -231,8 +242,6 @@ $(LINUX_DIR)/.stamp_initramfs_rebuilt: $(LINUX_DIR)/.stamp_target_installed $(LI
$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_IMAGE_NAME)
# Copy the kernel image to its final destination
cp $(LINUX_IMAGE_PATH) $(BINARIES_DIR)
- # If there is a .ub file copy it to the final destination
- test ! -f $(LINUX_IMAGE_PATH).ub || cp $(LINUX_IMAGE_PATH).ub $(BINARIES_DIR)
$(Q)touch $@
# The initramfs building code must make sure this target gets called
--
1.7.0.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-05-01 14:52 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-04-20 16:18 [Buildroot] [PATCH] Microblaze: Improvements in the build system Stephan Hoffmann
2012-04-28 16:17 ` Arnout Vandecappelle
2012-05-01 14:13 ` Stephan Hoffmann
2012-05-01 14:52 ` Peter Korsgaard
-- strict thread matches above, loose matches on Subject: below --
2012-04-08 16:47 Stephan Hoffmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.