* btusb & usb-storage regression = btusb & usb storage crash
@ 2012-04-13 10:19 Tomasz Miś
0 siblings, 0 replies; only message in thread
From: Tomasz Miś @ 2012-04-13 10:19 UTC (permalink / raw)
To: linux-bluetooth
[-- Attachment #1: Type: text/plain, Size: 210 bytes --]
I would like to report probably an error on btusb, but also causes crash on the usb-storage. I have already volunteered this problem on linux-usb. I also enclose demesg.log and lsubs.log
Greetings
Tomasz Miś
[-- Attachment #2: dmesg-3.3.1-ext73-clean-build-1-bad.log --]
[-- Type: application/octet-stream, Size: 43210 bytes --]
Initializing cgroup subsys cpu
Linux version 3.3.1-ext73-test-build-clean-vanilla-1 (root@ext73-X370) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #6 SMP Fri Apr 13 08:43:29 CEST 2012
Command line: BOOT_IMAGE=/boot/vmlinuz-3.3.1-ext73-test-build-clean-vanilla-1 root=UUID=f3a4671e-a7c2-4be1-8502-9ba769e31028 ro pcie_aspm=force acpi_osi=Linux acpi_enforce_resources=lax pci=nocrs quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000009fb90000 (usable)
BIOS-e820: 000000009fb90000 - 000000009fbe1000 (ACPI NVS)
BIOS-e820: 000000009fbe1000 - 000000009fbfd000 (reserved)
BIOS-e820: 000000009fbfd000 - 000000009fbfe000 (usable)
BIOS-e820: 000000009fbfe000 - 000000009fc06000 (ACPI NVS)
BIOS-e820: 000000009fc06000 - 000000009fc2a000 (reserved)
BIOS-e820: 000000009fc2a000 - 000000009fc6d000 (ACPI NVS)
BIOS-e820: 000000009fc6d000 - 000000009fdd4000 (usable)
BIOS-e820: 000000009fdd4000 - 000000009fef8000 (reserved)
BIOS-e820: 000000009fef8000 - 000000009ff00000 (usable)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100001000 - 000000013f000000 (usable)
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: Micro-Star International Co., Ltd. X370/MS-1356, BIOS E1356AMS.10D 07/14/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x13f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 09FF00000 mask FFFF00000 uncachable
2 base 0A0000000 mask FE0000000 uncachable
3 base 0C0000000 mask FC0000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000013f000000 aka 5104M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 2559MB, range: 1MB, type UC
reg 2, base: 2560MB, range: 512MB, type UC
reg 3, base: 3GB, range: 1GB, type UC
total RAM covered: 2559M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2559MB, range: 1MB, type UC
e820 update range: 000000009ff00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x9ff00 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000fccb0] fccb0
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000098000] 98000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000009ff00000
0000000000 - 0080000000 page 1G
0080000000 - 009fe00000 page 2M
009fe00000 - 009ff00000 page 4k
kernel direct mapping tables up to 9ff00000 @ 1fffd000-20000000
init_memory_mapping: 0000000100000000-000000013f000000
0100000000 - 013f000000 page 2M
kernel direct mapping tables up to 13f000000 @ 9fefe000-9ff00000
RAMDISK: 35c0c000 - 36dfe000
ACPI: RSDP 00000000000f0430 00024 (v02 MSI_NB)
ACPI: XSDT 000000009fbd5070 0005C (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: FACP 000000009fbdbd28 000F4 (v04 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120111/tbfadt-579)
ACPI: DSDT 000000009fbd5158 06BC9 (v02 MSI_NB MEGABOOK 00000000 INTL 20051117)
ACPI: FACS 000000009fc05f80 00040
ACPI: APIC 000000009fbdbe20 00062 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: MCFG 000000009fbdbe88 0003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00010013)
ACPI: SLIC 000000009fbdbec8 00176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: HPET 000000009fbdc040 00038 (v01 MSI_NB MEGABOOK 01072009 AMI 00000004)
ACPI: SSDT 000000009fbdc078 00448 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: SSDT 000000009fbdc4c0 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ae00000-ffff88013e5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0013f000
Movable zone start PFN for each node
Early memory PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x0009fb90
0: 0x0009fbfd -> 0x0009fbfe
0: 0x0009fc6d -> 0x0009fdd4
0: 0x0009fef8 -> 0x0009ff00
0: 0x00100001 -> 0x0013f000
On node 0 totalpages: 912524
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 634176 pages, LIFO batch:31
Normal zone: 4032 pages used for memmap
Normal zone: 254015 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000009fb90000 - 000000009fbe1000
PM: Registered nosave memory: 000000009fbe1000 - 000000009fbfd000
PM: Registered nosave memory: 000000009fbfe000 - 000000009fc06000
PM: Registered nosave memory: 000000009fc06000 - 000000009fc2a000
PM: Registered nosave memory: 000000009fc2a000 - 000000009fc6d000
PM: Registered nosave memory: 000000009fdd4000 - 000000009fef8000
PM: Registered nosave memory: 000000009ff00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
PM: Registered nosave memory: 0000000100000000 - 0000000100001000
Allocating PCI resources starting at 9ff00000 (gap: 9ff00000:40100000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88013ec00000 s71424 r8192 d22784 u1048576
pcpu-alloc: s71424 r8192 d22784 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 892103
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.3.1-ext73-test-build-clean-vanilla-1 root=UUID=f3a4671e-a7c2-4be1-8502-9ba769e31028 ro pcie_aspm=force acpi_osi=Linux acpi_enforce_resources=lax pci=nocrs quiet splash vt.handoff=7
PCIe ASPM is forcibly enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Memory: 3492264k/5226496k available (4638k kernel code, 1576400k absent, 157832k reserved, 3872k data, 460k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
NR_IRQS:4352 nr_irqs:512 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1596.589 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.17 BogoMIPS (lpj=1596589)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
tseg: 009ff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
ACPI: Core revision 20120111
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD E-350 Processor stepping 00
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 98000
Brought up 2 CPUs
Total of 2 processors activated (6386.35 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at 9fb90000 (331776 bytes)
PM: Registering ACPI NVS region at 9fbfe000 (32768 bytes)
PM: Registering ACPI NVS region at 9fc2a000 (274432 bytes)
print_constraints: dummy:
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux)
ACPI: EC: Detected MSI hardware, enabling workarounds.
ACPI: EC: Look up EC in DSDT
ACPI Error: No handler for Region [EC__] (ffff88013a825948) [EmbeddedControl] (20120111/evregion-376)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20120111/exfldio-306)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC__._REG] (Node ffff88013a826690), AE_NOT_EXIST (20120111/psparse-536)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffffffff] (ignored)
PCI: root bus 00: using default resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
pci 0000:00:01.0: [1002:9802] type 0 class 0x000300
pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:11.0: [1002:4394] type 0 class 0x000106
pci 0000:00:11.0: reg 10: [io 0xf190-0xf197]
pci 0000:00:11.0: reg 14: [io 0xf180-0xf183]
pci 0000:00:11.0: reg 18: [io 0xf170-0xf177]
pci 0000:00:11.0: reg 1c: [io 0xf160-0xf163]
pci 0000:00:11.0: reg 20: [io 0xf150-0xf15f]
pci 0000:00:11.0: reg 24: [mem 0xfeb4c000-0xfeb4c3ff]
pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xfeb4b000-0xfeb4bfff]
pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xfeb4a000-0xfeb4a0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xfeb49000-0xfeb49fff]
pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xfeb48000-0xfeb480ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
pci 0000:00:14.1: reg 10: [io 0xf140-0xf147]
pci 0000:00:14.1: reg 14: [io 0xf130-0xf133]
pci 0000:00:14.1: reg 18: [io 0xf120-0xf127]
pci 0000:00:14.1: reg 1c: [io 0xf110-0xf113]
pci 0000:00:14.1: reg 20: [io 0xf100-0xf10f]
pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604
pci 0000:00:15.2: supports D1 D2
pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 02-02]
pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
pci 0000:00:15.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:03:00.0: [10ec:8176] type 0 class 0x000280
pci 0000:03:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 18: [mem 0xfea00000-0xfea03fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.2: PCI bridge to [bus 03-03]
pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.2: bridge window [mem 0xfea00000-0xfeafffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
wmi: Mapper loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff
reserve RAM buffer: 000000009fb90000 - 000000009fffffff
reserve RAM buffer: 000000009fbfe000 - 000000009fffffff
reserve RAM buffer: 000000009fdd4000 - 000000009fffffff
reserve RAM buffer: 000000009ff00000 - 000000009fffffff
reserve RAM buffer: 000000013f000000 - 000000013fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c8000-0x000dffff window]
pnp 00:00: [mem 0xc0000000-0xffffffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [mem 0xe0000000-0xefffffff]
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x040b]
pnp 00:02: [io 0x04d6]
pnp 00:02: [io 0x0c00-0x0c01]
pnp 00:02: [io 0x0c14]
pnp 00:02: [io 0x0c50-0x0c51]
pnp 00:02: [io 0x0c52]
pnp 00:02: [io 0x0c6c]
pnp 00:02: [io 0x0c6f]
pnp 00:02: [io 0x0cd0-0x0cd1]
pnp 00:02: [io 0x0cd2-0x0cd3]
pnp 00:02: [io 0x0cd4-0x0cd5]
pnp 00:02: [io 0x0cd6-0x0cd7]
pnp 00:02: [io 0x0cd8-0x0cdf]
pnp 00:02: [io 0x0800-0x089f]
pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0b20-0x0b3f]
pnp 00:02: [io 0x0900-0x090f]
pnp 00:02: [io 0x0910-0x091f]
pnp 00:02: [io 0xfe00-0xfefe]
pnp 00:02: [io 0x0060-0x005f disabled]
pnp 00:02: [io 0x0064-0x0063 disabled]
pnp 00:02: [mem 0xfec00000-0xfec00fff]
pnp 00:02: [mem 0xfee00000-0xfee00fff]
pnp 00:02: [mem 0xfed80000-0xfed8ffff]
pnp 00:02: [mem 0xfed61000-0xfed70fff]
pnp 00:02: [mem 0xfec10000-0xfec10fff]
pnp 00:02: [mem 0xfed00000-0xfed00fff]
pnp 00:02: [mem 0xffe00000-0xffffffff]
system 00:02: [io 0x040b] has been reserved
system 00:02: [io 0x04d6] has been reserved
system 00:02: [io 0x0c00-0x0c01] has been reserved
system 00:02: [io 0x0c14] has been reserved
system 00:02: [io 0x0c50-0x0c51] has been reserved
system 00:02: [io 0x0c52] has been reserved
system 00:02: [io 0x0c6c] has been reserved
system 00:02: [io 0x0c6f] has been reserved
system 00:02: [io 0x0cd0-0x0cd1] has been reserved
system 00:02: [io 0x0cd2-0x0cd3] has been reserved
system 00:02: [io 0x0cd4-0x0cd5] has been reserved
system 00:02: [io 0x0cd6-0x0cd7] has been reserved
system 00:02: [io 0x0cd8-0x0cdf] has been reserved
system 00:02: [io 0x0800-0x089f] has been reserved
system 00:02: [io 0x0b20-0x0b3f] has been reserved
system 00:02: [io 0x0900-0x090f] has been reserved
system 00:02: [io 0x0910-0x091f] has been reserved
system 00:02: [io 0xfe00-0xfefe] has been reserved
system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:02: [mem 0xffe00000-0xffffffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0081-0x0083]
pnp 00:03: [io 0x0087]
pnp 00:03: [io 0x0089-0x008b]
pnp 00:03: [io 0x008f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io 0x0070-0x0071]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x0010-0x001f]
pnp 00:06: [io 0x0022-0x003f]
pnp 00:06: [io 0x0044-0x005f]
pnp 00:06: [io 0x0072-0x007f]
pnp 00:06: [io 0x0080]
pnp 00:06: [io 0x0084-0x0086]
pnp 00:06: [io 0x0088]
pnp 00:06: [io 0x008c-0x008e]
pnp 00:06: [io 0x0090-0x009f]
pnp 00:06: [io 0x00a2-0x00bf]
pnp 00:06: [io 0x00e0-0x00ef]
pnp 00:06: [io 0x04d0-0x04d1]
pnp 00:06: [mem 0x00000550-0x0000055f]
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [mem 0x00000550-0x0000055f] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0060]
pnp 00:09: [io 0x0064]
pnp 00:09: [irq 1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0a: [irq 12]
pnp 00:0a: Plug and Play ACPI device, IDs STLc043 PNP0f13 (active)
pnp 00:0b: [mem 0xa0000000-0xbfffffff]
system 00:0b: [mem 0xa0000000-0xbfffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0xfed00000-0xfed003ff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:14.4: PCI bridge to [bus 01-01]
pci 0000:00:15.0: PCI bridge to [bus 02-02]
pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
pci 0000:00:15.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:15.2: PCI bridge to [bus 03-03]
pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.2: bridge window [mem 0xfea00000-0xfeafffff]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 18376k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88009bb90000 - ffff88009fb90000
software IO TLB at phys 0x9bb90000 - 0x9fb90000
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1334305195.436:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.18)
msgmni has been set to 6856
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010100000, using 3072k, total 3072k
fb0: VESA VGA frame buffer device
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ADP1] (on-line)
ACPI: acpi_idle registered with cpuidle
Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
Linux agpgart interface v0.103
loop: module loaded
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4a000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb48000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4b000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb49000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Registering the dns_resolver key type
rtc_cmos 00:04: setting system clock to 2012-04-13 08:19:55 UTC (1334305195)
powernow-k8: Found 1 AMD E-350 Processor (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (1600 MHz)
powernow-k8: 1 : pstate 1 (1280 MHz)
powernow-k8: 2 : pstate 2 (800 MHz)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
Freeing unused kernel memory: 460k freed
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1488k freed
Freeing unused kernel memory: 772k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
udevd[59]: starting version 173
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:09/PNP0C09:00/PNP0C0D:00/input/input1
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
ACPI: Lid Switch [LID0]
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfeb4c000 port 0xfeb4c100 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfeb4c000 port 0xfeb4c180 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfeb4c000 port 0xfeb4c200 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfeb4c000 port 0xfeb4c280 irq 19
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (63 C)
acpi device:13: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input4
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
usb 1-3: new high-speed USB device number 3 using ehci_hcd
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3.00: ATA-8: Hitachi HTS547550A9E384, JE3OA60A, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6: SATA link down (SStatus 0 SControl 300)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54755 JE3O PQ: 0 ANSI: 5
Console: switching to colour frame buffer device 128x48
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 40 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168e/8111e at 0xffffc90000040000, 6c:62:6d:32:fb:59, XID 0c200000 IRQ 40
r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-5: new high-speed USB device number 4 using ehci_hcd
sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg0 type 0
Refined TSC clocksource calibration: 1596.599 MHz.
Switching to clocksource tsc
usb 3-1: new full-speed USB device number 2 using ohci_hcd
input: A4TECH USB Device as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input5
generic-usb 0003:09DA:054F.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:12.0-1/input0
input: A4TECH USB Device as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input6
generic-usb 0003:09DA:054F.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:12.0-1/input1
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Adding 4964080k swap on /dev/sda4. Priority:-1 extents:1 across:4964080k
udevd[326]: starting version 173
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 3278 MBytes.
[fglrx] vendor: 1002 device: 9802 count: 1
[fglrx] ioport: bar 1, base 0xf000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.95.3 [Mar 8 2012] with 1 minors
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
cfg80211: Calling CRDA to update world regulatory domain
SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
SP5100 TCO timer: mmio address 0xbafe00 already in use
Using firmware rtlwifi/rtl8192cfw.bin
psmouse serio1: sentelic: Finger Sensing Pad, hw: 13.2.1, sw: 1.0.0-K, buttons: 2
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: wireless switch is on
snd_hda_intel 0000:00:01.1: irq 41 for MSI/MSI-X
HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: EC
cfg80211: Regulatory domain changed to country: EC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input10
mousedev: PS/2 mouse device common for all mice
Linux media interface: v0.10
ip_tables: (C) 2000-2006 Netfilter Core Team
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (13d3:5070)
input: USB 2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
type=1400 audit(1334305207.634:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=682 comm="apparmor_parser"
type=1400 audit(1334305207.635:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=682 comm="apparmor_parser"
type=1400 audit(1334305207.635:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=682 comm="apparmor_parser"
type=1400 audit(1334305207.914:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=735 comm="apparmor_parser"
type=1400 audit(1334305207.915:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=735 comm="apparmor_parser"
type=1400 audit(1334305207.915:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=735 comm="apparmor_parser"
type=1400 audit(1334305207.987:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=737 comm="apparmor_parser"
type=1400 audit(1334305207.987:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=737 comm="apparmor_parser"
type=1400 audit(1334305207.987:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=737 comm="apparmor_parser"
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
init: alsa-restore main process (1021) terminated with status 99
type=1400 audit(1334305213.119:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1111 comm="apparmor_parser"
type=1400 audit(1334305213.119:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1111 comm="apparmor_parser"
r8169 0000:02:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
[fglrx] ATIF platform detected with notification ID: 0x81
fglrx_pci 0000:00:01.0: irq 42 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1313
[fglrx] Firegl kernel thread PID: 1314
[fglrx] Firegl kernel thread PID: 1315
[fglrx] IRQ 42 Enabled
[fglrx] Gart USWC size:1072 M.
[fglrx] Gart cacheable size:424 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fca3000, size:35d000
[fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.AF03] (Node ffff88013a82da50), AE_AML_INFINITE_LOOP (20120111/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATIF] (Node ffff88013a82d7d0), AE_AML_INFINITE_LOOP (20120111/psparse-536)
WARNING! power/level is deprecated; use power/control instead
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
usb 1-2: new high-speed USB device number 5 using ehci_hcd
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
scsi6 : usb-storage 1-2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-2: USB disconnect, device number 5
usb 1-2: new high-speed USB device number 6 using ehci_hcd
scsi9 : usb-storage 1-2:1.2
scsi10 : usb-storage 1-2:1.3
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
option 1-2:1.0: GSM modem (1-port) converter detected
usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
option 1-2:1.1: GSM modem (1-port) converter detected
usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
scsi 9:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
scsi 9:0:0:0: Attached scsi generic sg1 type 5
scsi 10:0:0:0: Direct-Access HUAWEI MMC Storage 2.31 PQ: 0 ANSI: 2
sd 10:0:0:0: Attached scsi generic sg2 type 0
sd 10:0:0:0: [sdb] Attached SCSI removable disk
sr0: scsi-1 drive
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 9:0:0:0: Attached scsi CD-ROM sr0
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
init: alsa-restore main process (2117) terminated with status 99
init: plymouth-stop pre-start process (2372) terminated with status 1
usb 1-2: USB disconnect, device number 6
option: option_instat_callback: error -108
option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
option 1-2:1.0: device disconnected
option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
option 1-2:1.1: device disconnected
scsi 10:0:0:0: killing request
usb 3-2: new full-speed USB device number 3 using ohci_hcd
usbcore: registered new interface driver btusb
usb 3-2: USB disconnect, device number 3
usb 3-2: new full-speed USB device number 4 using ohci_hcd
usb 3-2: USB disconnect, device number 4
general protection fault: 0000 [#1] SMP
CPU 0
Modules linked in: btusb ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt ppp_generic slhc sr_mod cdrom option usb_wwan usbserial usb_storage uas bnep rfcomm bluetooth af_packet ip6t_LOG xt_hl ip6t_rt nf_conntrack_ipv6 nf_defrag_ipv6 ipt_REJECT ipt_LOG xt_limit xt_tcpudp xt_addrtype binfmt_misc xt_state ip6table_filter ip6_tables ipv6 nf_conntrack_netbios_ns nf_conntrack_broadcast nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack iptable_filter uvcvideo videobuf2_core videodev ip_tables media v4l2_compat_ioctl32 videobuf2_vmalloc videobuf2_memops joydev x_tables mousedev snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_intel evdev arc4 mac_hid snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi rtl8192ce snd_rawmidi rtl8192c_common rtlwifi sp5100_tco psmouse snd_seq_midi_event mac80211 snd_seq serio_raw cfg80211 k10temp snd_timer i2c_piix4 snd_seq_device i2c_core hwmon snd rfkill soundcore snd_page_alloc fglrx(PO) sg sd_mod crc_t10dif ata_generic pata_acpi r8169 fbcon firmware_class tileblit font bitblit softcursor video mii thermal ahci libahci pata_atiixp button
Pid: 19, comm: khubd Tainted: P O 3.3.1-ext73-test-build-clean-vanilla-1 #6 Micro-Star International Co., Ltd. X370/MS-1356
RIP: 0010:[<ffffffff81483705>] [<ffffffff81483705>] _raw_spin_lock+0x5/0x40
RSP: 0018:ffff88013aa5db18 EFLAGS: 00010206
RAX: 0000000000000100 RBX: ffff88011163e800 RCX: 00000001820000f1
RDX: 0000000000000000 RSI: 0000000000000067 RDI: 3f3def7c3f400018
RBP: 3f3def7c3f400000 R08: 000000002870c201 R09: 00000001820000f1
R10: ffff88012870c298 R11: 0000000000000000 R12: ffff88011163ec28
R13: 0000000000000067 R14: ffff880112ed4088 R15: ffff880112ed4000
FS: 00007f6f96cd17c0(0000) GS:ffff88013ec00000(0000) knlGS:00000000f749b6c0
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffffffff600400 CR3: 0000000139d9e000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process khubd (pid: 19, threadinfo ffff88013aa5c000, task ffff88013a86d240)
Stack:
ffffffffa062fce9 ffff880111639070 ffff88011163e800 ffff880036ea3638
ffff880112f04800 ffffffffa0674108 ffff880112ed4088 ffff880112ed4000
ffffffffa0630edb ffff88011163e800 ffffffffa0612738 ffff880036ea3010
Call Trace:
[<ffffffffa062fce9>] ? sco_conn_del.isra.14+0x29/0x1c0 [bluetooth]
[<ffffffffa0630edb>] ? sco_disconn_cfm+0x1b/0x20 [bluetooth]
[<ffffffffa0612738>] ? hci_conn_hash_flush+0x98/0xc0 [bluetooth]
[<ffffffffa060d010>] ? hci_dev_do_close.part.19+0x90/0x260 [bluetooth]
[<ffffffffa060d85f>] ? hci_unregister_dev+0x7f/0x3a0 [bluetooth]
[<ffffffffa0672b4e>] ? btusb_disconnect+0x4e/0xc0 [btusb]
[<ffffffff81349c1a>] ? usb_unbind_interface+0x5a/0x220
[<ffffffff812e9b97>] ? __device_release_driver+0x97/0x100
[<ffffffff812e9c1d>] ? device_release_driver+0x1d/0x40
[<ffffffff812e957c>] ? bus_remove_device+0xfc/0x160
[<ffffffff812e59ae>] ? device_del+0x28e/0x420
[<ffffffff81346ce2>] ? usb_disable_device+0x102/0x340
[<ffffffff8133c737>] ? usb_disconnect+0x97/0x140
[<ffffffff8133e98e>] ? hub_thread+0xd6e/0x18c0
[<ffffffff810561a0>] ? add_wait_queue+0x60/0x60
[<ffffffff8148201a>] ? __schedule+0x23a/0x660
[<ffffffff8133dc20>] ? usb_new_device+0x140/0x140
[<ffffffff81055805>] ? kthread+0x85/0xa0
[<ffffffff81485014>] ? kernel_thread_helper+0x4/0x10
[<ffffffff81055780>] ? kthread_freezable_should_stop+0x60/0x60
[<ffffffff81485010>] ? gs_change+0xb/0xb
Code: 66 0f 1f 44 00 00 f3 90 0f b6 03 38 c2 75 f7 5b c3 66 0f 1f 44 00 00 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 b8 00 01 00 00 <f0> 66 0f c1 07 0f b6 d4 38 c2 74 18 66 66 66 66 66 66 2e 0f 1f
RIP [<ffffffff81483705>] _raw_spin_lock+0x5/0x40
RSP <ffff88013aa5db18>
---[ end trace f246aef008693d5a ]---
[-- Attachment #3: lsusb-ext73-clean-build-1 --]
[-- Type: application/octet-stream, Size: 508 bytes --]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0bda:0139 Realtek Semiconductor Corp.
Bus 001 Device 004: ID 13d3:5070 IMC Networks Webcam
Bus 003 Device 002: ID 09da:054f A4 Tech Co., Ltd
Bus 003 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2012-04-13 10:19 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-04-13 10:19 btusb & usb-storage regression = btusb & usb storage crash Tomasz Miś
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.