From: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
To: Arnd Bergmann <arnd@kernel.org>, linux-kernel@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>,
Arnd Bergmann <arnd@arndb.de>,
Russell King <linux@armlinux.org.uk>,
Tony Luck <tony.luck@intel.com>,
Fenghua Yu <fenghua.yu@intel.com>,
Greg Ungerer <gerg@linux-m68k.org>,
Finn Thain <fthain@telegraphics.com.au>,
Philip Blundell <philb@gnu.org>,
Joshua Thompson <funaho@jurai.org>, Sam Creasey <sammy@sammy.net>,
"James E.J. Bottomley" <James.Bottomley@hansenpartnership.com>,
Helge Deller <deller@gmx.de>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
John Stultz <john.stultz@linaro.org>,
Stephen Boyd <sboyd@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
linux-ia64@vger.kernel.org,
Parisc List <linux-parisc@vger.kernel.org>,
linux-m68k <linux-m68k@lists.linux-m68k.org>,
Linux ARM <linux-arm-kernel@lists.infradead.org>,
Mike Rapoport <rppt@linux.ibm.com>,
Anatoly Pugachev <matorola@gmail.com>
Subject: Re: [PATCH v2 05/15] ia64: convert to legacy_timer_tick
Date: Fri, 18 Dec 2020 22:29:45 +0100 [thread overview]
Message-ID: <59efce0e-a28d-9424-82ca-fb7f3a1b9c29@physik.fu-berlin.de> (raw)
In-Reply-To: <20201030151758.1241164-6-arnd@kernel.org>
Hi Arnd!
On 10/30/20 4:17 PM, Arnd Bergmann wrote:
> ia64 is the only architecture that calls xtime_update() in a loop,
> once for each jiffie that has passed since the last event.
>
> Before commit 3171a0305d62 ("[PATCH] simplify update_times (avoid
> jiffies/jiffies_64 aliasing problem)") in 2006, it could not actually do
> this any differently, but now it seems simpler to just pass the number
> of jiffies that passed in the meantime.
>
> While this loses the ability process interrupts in the middle of
> the timer tick by calling local_irq_enable(), doing so is fairly
> peculiar anyway and it seems better to just do what everyone
> else does here.
This broke the hpsa block device driver on my HP RX2600.
I'm seeing this backtrace now:
[ 905.883273] usb 1-2: SerialNumber: A60020000001
[ 905.918170] sda: sda1 sda2 sda3
[ 905.920107] sd 0:1:0:0: [sda] Attached SCSI disk
[ 905.944102] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 905.944102] scsi host1: usb-storage 1-2:1.0
[ 905.944102] usbcore: registered new interface driver usb-storage
[ 905.944117] usbcore: registered new interface driver uas
[ 905.948117] scsi 1:0:0:0: CD-ROM TEAC DV-W28EAW H.0C PQ: 0 ANSI: 0
[ 905.952013] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 905.956102] sr 1:0:0:0: Power-on or device reset occurred
[ 905.968107] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 905.968107] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 906.028013] ioc0: LSISAS1068 B0: Capabilities={Initiator}
[ 906.028110] tg3 0000:01:02.0 eth0: Tigon3 [partno(BCM95700A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:17:a4:99:2d:09
[ 906.026167] usb 2-1: New USB device found, idVendor=03f0, idProduct=1126, bcdDevice= 0.01
[ 906.028110] tg3 0000:01:02.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 906.028110] tg3 0000:01:02.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 906.030214] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=63
[ 906.032240] tg3 0000:01:02.0 eth0: dma_rwctrl[769f0000] dma_mask[64-bit]
[ 906.036102] GSI 30 (level, low) -> CPU 2 (0x0200) vector 67
[ 906.034186] usb 2-1: Product: Virtual Management Device
[ 906.038235] usb 2-1: Manufacturer: HP
[ 906.040017] usb 2-1: SerialNumber: 0017a499dd1c
[ 906.056108] hid: raw HID events driver (C) Jiri Kosina
[ 906.080013] usbcore: registered new interface driver usbhid
[ 906.080013] usbhid: USB HID core driver
[ 906.080107] input: HP Virtual Management Device as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/0003:03F0:1126.0001/input/input2
[ 906.088110] hid-generic 0003:03F0:1126.0001: input,hidraw0: USB HID v1.11 Keyboard [HP Virtual Management Device] on usb-0000:00:02.0-1/input0
[ 906.088110] input: HP Virtual Management Device as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/0003:03F0:1126.0002/input/input3
[ 906.092110] hid-generic 0003:03F0:1126.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Management Device] on usb-0000:00:02.0-1/input1
[ 906.104104] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.108288] hpsa 0000:05:00.0: device is ready.
[ 906.108288] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.152107] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.170926] hpsa 0000:05:00.0: device is ready.
[ 906.170926] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.218925] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.222925] hpsa 0000:05:00.0: device is ready.
[ 906.222925] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.266926] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.272016] hpsa 0000:05:00.0: device is ready.
[ 906.272016] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.272107] scsi host2: ioc0: LSISAS1068 B0, FwRev=010f0000h, Ports=1, MaxQ=511, IRQ=62
[ 906.324110] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.330925] hpsa 0000:05:00.0: device is ready.
[ 906.330925] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.378925] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.382926] hpsa 0000:05:00.0: device is ready.
[ 906.382926] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.386926] tg3 0000:01:02.1 eth1: Tigon3 [partno(BCM95700A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:17:a4:99:2d:08
[ 906.386926] tg3 0000:01:02.1 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 906.388016] tg3 0000:01:02.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 906.388016] tg3 0000:01:02.1 eth1: dma_rwctrl[769f0000] dma_mask[64-bit]
[ 906.396108] tg3 0000:01:02.1 enp1s2f1: renamed from eth1
[ 906.408107] tg3 0000:01:02.0 enp1s2f0: renamed from eth0
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.36
[/sbin/fsck.ext4 (1) -- /dev/sda2] fsck.ext4 -a -C0 /dev/sda2
/dev/sda2: clean, 317994/2068416 files, 6480495/8257536 blocks
[ 906.666923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.670923] hpsa 0000:05:00.0: device is ready.
[ 906.670923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
done.
[ 906.722166] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 906.722166] rcu: 2-....: (3 ticks this GP) idle=fe6/1/0x4000000000000000 softirq=693/698 fqs=4
[ 906.722166] (detected by 0, t=6115 jiffies, g=465, q=80)
[ 906.722166] Task dump for CPU 2:
[ 906.722166] task:modprobe state:R running task stack: 0 pid: 162 ppid: 146 flags:0x00000002
[ 906.722166]
[ 906.722166] Call Trace:
[ 906.722166] [<0000000000000fd6>] 0xfd6
[ 906.722166] sp=e000010046d27c70 bsp=e000010046d20e80
[ 906.782168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 906.782168] rcu: 2-....: (18 ticks this GP) idle=fe6/1/0x4000000000000000 softirq=693/698 fqs=18
[ 906.782168] (detected by 0, t=22157 jiffies, g=465, q=80)
[ 906.782168] Task dump for CPU 2:
[ 906.782168] task:modprobe state:R running task stack: 0 pid: 162 ppid: 146 flags:0x00000002
[ 906.782168]
[ 906.782168] Call Trace:
[ 906.782168] [<0000001d00000065>] 0x1d00000065
[ 906.782168] sp=e000010046d27c70 bsp=e000010046d20d48
[ 906.844107] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 906.978917] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 907.726923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.734923] hpsa 0000:05:00.0: device is ready.
[ 907.734923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.790923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.802923] hpsa 0000:05:00.0: device is ready.
[ 907.802923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.860014] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.886923] hpsa 0000:05:00.0: device is ready.
[ 907.886923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.930923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.942923] hpsa 0000:05:00.0: device is ready.
[ 907.942923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.976107] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.982923] hpsa 0000:05:00.0: device is ready.
[ 907.982923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.106923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.110923] hpsa 0000:05:00.0: device is ready.
[ 908.110923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.256014] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.258922] hpsa 0000:05:00.0: device is ready.
[ 908.258922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.428014] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.434923] hpsa 0000:05:00.0: device is ready.
[ 908.434923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.710922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.714922] hpsa 0000:05:00.0: device is ready.
[ 908.714922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.754922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.758922] hpsa 0000:05:00.0: device is ready.
[ 908.758922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.788106] systemd[1]: Inserted module 'autofs4'
[ 908.972107] systemd[1]: systemd 246.6-5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD -SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 908.976013] systemd[1]: Detected architecture ia64.
Welcome to Debian GNU/Linux bullseye/sid!
[ 909.020014] systemd[1]: Set hostname to <glendronach>.
[ 909.178923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.182922] hpsa 0000:05:00.0: device is ready.
[ 909.182922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.242922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.254922] hpsa 0000:05:00.0: device is ready.
[ 909.254922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.322922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.334922] hpsa 0000:05:00.0: device is ready.
[ 909.334922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.360108] INFO: task systemd-sysv-ge:200 blocked for more than 127 seconds.
[ 909.360108] Not tainted 5.10.0+ #130
[ 909.360108] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 909.360108] task:systemd-sysv-ge state:D stack: 0 pid: 200 ppid: 189 flags:0x00000000
[ 909.364108]
[ 909.364108] Call Trace:
[ 909.364423] [<a00000010109b210>] __schedule+0x890/0x21e0
[ 909.364423] sp=e0000100487d7b70 bsp=e0000100487d1748
[ 909.368423] [<a00000010109cc00>] schedule+0xa0/0x240
[ 909.368423] sp=e0000100487d7b90 bsp=e0000100487d16e0
[ 909.368558] [<a00000010109ce70>] io_schedule+0x70/0xa0
[ 909.368558] sp=e0000100487d7b90 bsp=e0000100487d16c0
[ 909.372290] [<a00000010109e1c0>] bit_wait_io+0x20/0xe0
[ 909.372290] sp=e0000100487d7b90 bsp=e0000100487d1698
[ 909.374168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 909.376290] [<a00000010109d860>] __wait_on_bit+0xc0/0x1c0
[ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1648
[ 909.374168] rcu: 3-....: (2 ticks this GP) idle=19e/1/0x4000000000000002 softirq=1581/1581 fqs=2
[ 909.374168] (detected by 0, t=5661 jiffies, g=1089, q=3)
[ 909.376290] [<a00000010109da80>] out_of_line_wait_on_bit+0x120/0x140
[ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1610
[ 909.374168] Task dump for CPU 3:
[ 909.374168] task:khungtaskd state:R running task
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
WARNING: multiple messages have this Message-ID (diff)
From: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
To: Arnd Bergmann <arnd@kernel.org>, linux-kernel@vger.kernel.org
Cc: linux-ia64@vger.kernel.org,
Linus Walleij <linus.walleij@linaro.org>,
"James E.J. Bottomley" <James.Bottomley@hansenpartnership.com>,
Greg Ungerer <gerg@linux-m68k.org>, Helge Deller <deller@gmx.de>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Anatoly Pugachev <matorola@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Finn Thain <fthain@telegraphics.com.au>,
Mike Rapoport <rppt@linux.ibm.com>, Sam Creasey <sammy@sammy.net>,
Fenghua Yu <fenghua.yu@intel.com>, Arnd Bergmann <arnd@arndb.de>,
linux-m68k <linux-m68k@lists.linux-m68k.org>,
John Stultz <john.stultz@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Linux ARM <linux-arm-kernel@lists.infradead.org>,
Tony Luck <tony.luck@intel.com>,
Parisc List <linux-parisc@vger.kernel.org>,
Stephen Boyd <sboyd@kernel.org>, Philip Blundell <philb@gnu.org>,
Joshua Thompson <funaho@jurai.org>
Subject: Re: [PATCH v2 05/15] ia64: convert to legacy_timer_tick
Date: Fri, 18 Dec 2020 22:29:45 +0100 [thread overview]
Message-ID: <59efce0e-a28d-9424-82ca-fb7f3a1b9c29@physik.fu-berlin.de> (raw)
In-Reply-To: <20201030151758.1241164-6-arnd@kernel.org>
Hi Arnd!
On 10/30/20 4:17 PM, Arnd Bergmann wrote:
> ia64 is the only architecture that calls xtime_update() in a loop,
> once for each jiffie that has passed since the last event.
>
> Before commit 3171a0305d62 ("[PATCH] simplify update_times (avoid
> jiffies/jiffies_64 aliasing problem)") in 2006, it could not actually do
> this any differently, but now it seems simpler to just pass the number
> of jiffies that passed in the meantime.
>
> While this loses the ability process interrupts in the middle of
> the timer tick by calling local_irq_enable(), doing so is fairly
> peculiar anyway and it seems better to just do what everyone
> else does here.
This broke the hpsa block device driver on my HP RX2600.
I'm seeing this backtrace now:
[ 905.883273] usb 1-2: SerialNumber: A60020000001
[ 905.918170] sda: sda1 sda2 sda3
[ 905.920107] sd 0:1:0:0: [sda] Attached SCSI disk
[ 905.944102] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 905.944102] scsi host1: usb-storage 1-2:1.0
[ 905.944102] usbcore: registered new interface driver usb-storage
[ 905.944117] usbcore: registered new interface driver uas
[ 905.948117] scsi 1:0:0:0: CD-ROM TEAC DV-W28EAW H.0C PQ: 0 ANSI: 0
[ 905.952013] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 905.956102] sr 1:0:0:0: Power-on or device reset occurred
[ 905.968107] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 905.968107] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 906.028013] ioc0: LSISAS1068 B0: Capabilities={Initiator}
[ 906.028110] tg3 0000:01:02.0 eth0: Tigon3 [partno(BCM95700A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:17:a4:99:2d:09
[ 906.026167] usb 2-1: New USB device found, idVendor=03f0, idProduct=1126, bcdDevice= 0.01
[ 906.028110] tg3 0000:01:02.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 906.028110] tg3 0000:01:02.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 906.030214] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=63
[ 906.032240] tg3 0000:01:02.0 eth0: dma_rwctrl[769f0000] dma_mask[64-bit]
[ 906.036102] GSI 30 (level, low) -> CPU 2 (0x0200) vector 67
[ 906.034186] usb 2-1: Product: Virtual Management Device
[ 906.038235] usb 2-1: Manufacturer: HP
[ 906.040017] usb 2-1: SerialNumber: 0017a499dd1c
[ 906.056108] hid: raw HID events driver (C) Jiri Kosina
[ 906.080013] usbcore: registered new interface driver usbhid
[ 906.080013] usbhid: USB HID core driver
[ 906.080107] input: HP Virtual Management Device as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/0003:03F0:1126.0001/input/input2
[ 906.088110] hid-generic 0003:03F0:1126.0001: input,hidraw0: USB HID v1.11 Keyboard [HP Virtual Management Device] on usb-0000:00:02.0-1/input0
[ 906.088110] input: HP Virtual Management Device as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/0003:03F0:1126.0002/input/input3
[ 906.092110] hid-generic 0003:03F0:1126.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Management Device] on usb-0000:00:02.0-1/input1
[ 906.104104] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.108288] hpsa 0000:05:00.0: device is ready.
[ 906.108288] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.152107] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.170926] hpsa 0000:05:00.0: device is ready.
[ 906.170926] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.218925] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.222925] hpsa 0000:05:00.0: device is ready.
[ 906.222925] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.266926] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.272016] hpsa 0000:05:00.0: device is ready.
[ 906.272016] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.272107] scsi host2: ioc0: LSISAS1068 B0, FwRev=010f0000h, Ports=1, MaxQ=511, IRQ=62
[ 906.324110] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.330925] hpsa 0000:05:00.0: device is ready.
[ 906.330925] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.378925] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.382926] hpsa 0000:05:00.0: device is ready.
[ 906.382926] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.386926] tg3 0000:01:02.1 eth1: Tigon3 [partno(BCM95700A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:17:a4:99:2d:08
[ 906.386926] tg3 0000:01:02.1 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 906.388016] tg3 0000:01:02.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 906.388016] tg3 0000:01:02.1 eth1: dma_rwctrl[769f0000] dma_mask[64-bit]
[ 906.396108] tg3 0000:01:02.1 enp1s2f1: renamed from eth1
[ 906.408107] tg3 0000:01:02.0 enp1s2f0: renamed from eth0
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.36
[/sbin/fsck.ext4 (1) -- /dev/sda2] fsck.ext4 -a -C0 /dev/sda2
/dev/sda2: clean, 317994/2068416 files, 6480495/8257536 blocks
[ 906.666923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.670923] hpsa 0000:05:00.0: device is ready.
[ 906.670923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
done.
[ 906.722166] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 906.722166] rcu: 2-....: (3 ticks this GP) idle=fe6/1/0x4000000000000000 softirq=693/698 fqs=4
[ 906.722166] (detected by 0, t=6115 jiffies, g=465, q=80)
[ 906.722166] Task dump for CPU 2:
[ 906.722166] task:modprobe state:R running task stack: 0 pid: 162 ppid: 146 flags:0x00000002
[ 906.722166]
[ 906.722166] Call Trace:
[ 906.722166] [<0000000000000fd6>] 0xfd6
[ 906.722166] sp=e000010046d27c70 bsp=e000010046d20e80
[ 906.782168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 906.782168] rcu: 2-....: (18 ticks this GP) idle=fe6/1/0x4000000000000000 softirq=693/698 fqs=18
[ 906.782168] (detected by 0, t=22157 jiffies, g=465, q=80)
[ 906.782168] Task dump for CPU 2:
[ 906.782168] task:modprobe state:R running task stack: 0 pid: 162 ppid: 146 flags:0x00000002
[ 906.782168]
[ 906.782168] Call Trace:
[ 906.782168] [<0000001d00000065>] 0x1d00000065
[ 906.782168] sp=e000010046d27c70 bsp=e000010046d20d48
[ 906.844107] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 906.978917] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 907.726923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.734923] hpsa 0000:05:00.0: device is ready.
[ 907.734923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.790923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.802923] hpsa 0000:05:00.0: device is ready.
[ 907.802923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.860014] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.886923] hpsa 0000:05:00.0: device is ready.
[ 907.886923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.930923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.942923] hpsa 0000:05:00.0: device is ready.
[ 907.942923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.976107] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.982923] hpsa 0000:05:00.0: device is ready.
[ 907.982923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.106923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.110923] hpsa 0000:05:00.0: device is ready.
[ 908.110923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.256014] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.258922] hpsa 0000:05:00.0: device is ready.
[ 908.258922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.428014] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.434923] hpsa 0000:05:00.0: device is ready.
[ 908.434923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.710922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.714922] hpsa 0000:05:00.0: device is ready.
[ 908.714922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.754922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.758922] hpsa 0000:05:00.0: device is ready.
[ 908.758922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.788106] systemd[1]: Inserted module 'autofs4'
[ 908.972107] systemd[1]: systemd 246.6-5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD -SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 908.976013] systemd[1]: Detected architecture ia64.
Welcome to Debian GNU/Linux bullseye/sid!
[ 909.020014] systemd[1]: Set hostname to <glendronach>.
[ 909.178923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.182922] hpsa 0000:05:00.0: device is ready.
[ 909.182922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.242922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.254922] hpsa 0000:05:00.0: device is ready.
[ 909.254922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.322922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.334922] hpsa 0000:05:00.0: device is ready.
[ 909.334922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.360108] INFO: task systemd-sysv-ge:200 blocked for more than 127 seconds.
[ 909.360108] Not tainted 5.10.0+ #130
[ 909.360108] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 909.360108] task:systemd-sysv-ge state:D stack: 0 pid: 200 ppid: 189 flags:0x00000000
[ 909.364108]
[ 909.364108] Call Trace:
[ 909.364423] [<a00000010109b210>] __schedule+0x890/0x21e0
[ 909.364423] sp=e0000100487d7b70 bsp=e0000100487d1748
[ 909.368423] [<a00000010109cc00>] schedule+0xa0/0x240
[ 909.368423] sp=e0000100487d7b90 bsp=e0000100487d16e0
[ 909.368558] [<a00000010109ce70>] io_schedule+0x70/0xa0
[ 909.368558] sp=e0000100487d7b90 bsp=e0000100487d16c0
[ 909.372290] [<a00000010109e1c0>] bit_wait_io+0x20/0xe0
[ 909.372290] sp=e0000100487d7b90 bsp=e0000100487d1698
[ 909.374168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 909.376290] [<a00000010109d860>] __wait_on_bit+0xc0/0x1c0
[ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1648
[ 909.374168] rcu: 3-....: (2 ticks this GP) idle=19e/1/0x4000000000000002 softirq=1581/1581 fqs=2
[ 909.374168] (detected by 0, t=5661 jiffies, g=1089, q=3)
[ 909.376290] [<a00000010109da80>] out_of_line_wait_on_bit+0x120/0x140
[ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1610
[ 909.374168] Task dump for CPU 3:
[ 909.374168] task:khungtaskd state:R running task
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
To: Arnd Bergmann <arnd@kernel.org>, linux-kernel@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>,
Arnd Bergmann <arnd@arndb.de>,
Russell King <linux@armlinux.org.uk>,
Tony Luck <tony.luck@intel.com>,
Fenghua Yu <fenghua.yu@intel.com>,
Greg Ungerer <gerg@linux-m68k.org>,
Finn Thain <fthain@telegraphics.com.au>,
Philip Blundell <philb@gnu.org>,
Joshua Thompson <funaho@jurai.org>, Sam Creasey <sammy@sammy.net>,
"James E.J. Bottomley" <James.Bottomley@hansenpartnership.com>,
Helge Deller <deller@gmx.de>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
John Stultz <john.stultz@linaro.org>,
Stephen Boyd <sboyd@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
linux-ia64@vger.kernel.org,
Parisc List <linux-parisc@vger.kernel.org>,
linux-m68k <linux-m68k@lists.linux-m68k.org>,
Linux ARM <linux-arm-kernel@lists.infradead.org>,
Mike Rapoport <rppt@linux.ibm.com>,
Anatoly Pugachev <matorola@gmail.com>
Subject: Re: [PATCH v2 05/15] ia64: convert to legacy_timer_tick
Date: Fri, 18 Dec 2020 21:29:45 +0000 [thread overview]
Message-ID: <59efce0e-a28d-9424-82ca-fb7f3a1b9c29@physik.fu-berlin.de> (raw)
In-Reply-To: <20201030151758.1241164-6-arnd@kernel.org>
Hi Arnd!
On 10/30/20 4:17 PM, Arnd Bergmann wrote:
> ia64 is the only architecture that calls xtime_update() in a loop,
> once for each jiffie that has passed since the last event.
>
> Before commit 3171a0305d62 ("[PATCH] simplify update_times (avoid
> jiffies/jiffies_64 aliasing problem)") in 2006, it could not actually do
> this any differently, but now it seems simpler to just pass the number
> of jiffies that passed in the meantime.
>
> While this loses the ability process interrupts in the middle of
> the timer tick by calling local_irq_enable(), doing so is fairly
> peculiar anyway and it seems better to just do what everyone
> else does here.
This broke the hpsa block device driver on my HP RX2600.
I'm seeing this backtrace now:
[ 905.883273] usb 1-2: SerialNumber: A60020000001
[ 905.918170] sda: sda1 sda2 sda3
[ 905.920107] sd 0:1:0:0: [sda] Attached SCSI disk
[ 905.944102] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 905.944102] scsi host1: usb-storage 1-2:1.0
[ 905.944102] usbcore: registered new interface driver usb-storage
[ 905.944117] usbcore: registered new interface driver uas
[ 905.948117] scsi 1:0:0:0: CD-ROM TEAC DV-W28EAW H.0C PQ: 0 ANSI: 0
[ 905.952013] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 905.956102] sr 1:0:0:0: Power-on or device reset occurred
[ 905.968107] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 905.968107] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 906.028013] ioc0: LSISAS1068 B0: Capabilities={Initiator}
[ 906.028110] tg3 0000:01:02.0 eth0: Tigon3 [partno(BCM95700A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:17:a4:99:2d:09
[ 906.026167] usb 2-1: New USB device found, idVendor\x03f0, idProduct\x1126, bcdDevice= 0.01
[ 906.028110] tg3 0000:01:02.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 906.028110] tg3 0000:01:02.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 906.030214] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumberc
[ 906.032240] tg3 0000:01:02.0 eth0: dma_rwctrl[769f0000] dma_mask[64-bit]
[ 906.036102] GSI 30 (level, low) -> CPU 2 (0x0200) vector 67
[ 906.034186] usb 2-1: Product: Virtual Management Device
[ 906.038235] usb 2-1: Manufacturer: HP
[ 906.040017] usb 2-1: SerialNumber: 0017a499dd1c
[ 906.056108] hid: raw HID events driver (C) Jiri Kosina
[ 906.080013] usbcore: registered new interface driver usbhid
[ 906.080013] usbhid: USB HID core driver
[ 906.080107] input: HP Virtual Management Device as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/0003:03F0:1126.0001/input/input2
[ 906.088110] hid-generic 0003:03F0:1126.0001: input,hidraw0: USB HID v1.11 Keyboard [HP Virtual Management Device] on usb-0000:00:02.0-1/input0
[ 906.088110] input: HP Virtual Management Device as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/0003:03F0:1126.0002/input/input3
[ 906.092110] hid-generic 0003:03F0:1126.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Management Device] on usb-0000:00:02.0-1/input1
[ 906.104104] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.108288] hpsa 0000:05:00.0: device is ready.
[ 906.108288] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.152107] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.170926] hpsa 0000:05:00.0: device is ready.
[ 906.170926] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.218925] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.222925] hpsa 0000:05:00.0: device is ready.
[ 906.222925] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.266926] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.272016] hpsa 0000:05:00.0: device is ready.
[ 906.272016] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.272107] scsi host2: ioc0: LSISAS1068 B0, FwRev\x010f0000h, Ports=1, MaxQQ1, IRQb
[ 906.324110] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.330925] hpsa 0000:05:00.0: device is ready.
[ 906.330925] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.378925] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.382926] hpsa 0000:05:00.0: device is ready.
[ 906.382926] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.386926] tg3 0000:01:02.1 eth1: Tigon3 [partno(BCM95700A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:17:a4:99:2d:08
[ 906.386926] tg3 0000:01:02.1 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 906.388016] tg3 0000:01:02.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 906.388016] tg3 0000:01:02.1 eth1: dma_rwctrl[769f0000] dma_mask[64-bit]
[ 906.396108] tg3 0000:01:02.1 enp1s2f1: renamed from eth1
[ 906.408107] tg3 0000:01:02.0 enp1s2f0: renamed from eth0
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.36
[/sbin/fsck.ext4 (1) -- /dev/sda2] fsck.ext4 -a -C0 /dev/sda2
/dev/sda2: clean, 317994/2068416 files, 6480495/8257536 blocks
[ 906.666923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.670923] hpsa 0000:05:00.0: device is ready.
[ 906.670923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
done.
[ 906.722166] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 906.722166] rcu: 2-....: (3 ticks this GP) idleþ6/1/0x4000000000000000 softirqi3/698 fqs=4
[ 906.722166] (detected by 0, ta15 jiffies, gF5, q€)
[ 906.722166] Task dump for CPU 2:
[ 906.722166] task:modprobe state:R running task stack: 0 pid: 162 ppid: 146 flags:0x00000002
[ 906.722166]
[ 906.722166] Call Trace:
[ 906.722166] [<0000000000000fd6>] 0xfd6
[ 906.722166] spà00010046d27c70 bspà00010046d20e80
[ 906.782168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 906.782168] rcu: 2-....: (18 ticks this GP) idleþ6/1/0x4000000000000000 softirqi3/698 fqs\x18
[ 906.782168] (detected by 0, t"157 jiffies, gF5, q€)
[ 906.782168] Task dump for CPU 2:
[ 906.782168] task:modprobe state:R running task stack: 0 pid: 162 ppid: 146 flags:0x00000002
[ 906.782168]
[ 906.782168] Call Trace:
[ 906.782168] [<0000001d00000065>] 0x1d00000065
[ 906.782168] spà00010046d27c70 bspà00010046d20d48
[ 906.844107] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 906.978917] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 907.726923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.734923] hpsa 0000:05:00.0: device is ready.
[ 907.734923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.790923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.802923] hpsa 0000:05:00.0: device is ready.
[ 907.802923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.860014] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.886923] hpsa 0000:05:00.0: device is ready.
[ 907.886923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.930923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.942923] hpsa 0000:05:00.0: device is ready.
[ 907.942923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.976107] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.982923] hpsa 0000:05:00.0: device is ready.
[ 907.982923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.106923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.110923] hpsa 0000:05:00.0: device is ready.
[ 908.110923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.256014] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.258922] hpsa 0000:05:00.0: device is ready.
[ 908.258922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.428014] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.434923] hpsa 0000:05:00.0: device is ready.
[ 908.434923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.710922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.714922] hpsa 0000:05:00.0: device is ready.
[ 908.714922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.754922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.758922] hpsa 0000:05:00.0: device is ready.
[ 908.758922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.788106] systemd[1]: Inserted module 'autofs4'
[ 908.972107] systemd[1]: systemd 246.6-5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD -SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 908.976013] systemd[1]: Detected architecture ia64.
Welcome to Debian GNU/Linux bullseye/sid!
[ 909.020014] systemd[1]: Set hostname to <glendronach>.
[ 909.178923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.182922] hpsa 0000:05:00.0: device is ready.
[ 909.182922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.242922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.254922] hpsa 0000:05:00.0: device is ready.
[ 909.254922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.322922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.334922] hpsa 0000:05:00.0: device is ready.
[ 909.334922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.360108] INFO: task systemd-sysv-ge:200 blocked for more than 127 seconds.
[ 909.360108] Not tainted 5.10.0+ #130
[ 909.360108] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 909.360108] task:systemd-sysv-ge state:D stack: 0 pid: 200 ppid: 189 flags:0x00000000
[ 909.364108]
[ 909.364108] Call Trace:
[ 909.364423] [<a00000010109b210>] __schedule+0x890/0x21e0
[ 909.364423] spà000100487d7b70 bspà000100487d1748
[ 909.368423] [<a00000010109cc00>] schedule+0xa0/0x240
[ 909.368423] spà000100487d7b90 bspà000100487d16e0
[ 909.368558] [<a00000010109ce70>] io_schedule+0x70/0xa0
[ 909.368558] spà000100487d7b90 bspà000100487d16c0
[ 909.372290] [<a00000010109e1c0>] bit_wait_io+0x20/0xe0
[ 909.372290] spà000100487d7b90 bspà000100487d1698
[ 909.374168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 909.376290] [<a00000010109d860>] __wait_on_bit+0xc0/0x1c0
[ 909.376290] spà000100487d7b90 bspà000100487d1648
[ 909.374168] rcu: 3-....: (2 ticks this GP) idle\x19e/1/0x4000000000000002 softirq\x1581/1581 fqs=2
[ 909.374168] (detected by 0, tV61 jiffies, g\x1089, q=3)
[ 909.376290] [<a00000010109da80>] out_of_line_wait_on_bit+0x120/0x140
[ 909.376290] spà000100487d7b90 bspà000100487d1610
[ 909.374168] Task dump for CPU 3:
[ 909.374168] task:khungtaskd state:R running task
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
next prev parent reply other threads:[~2020-12-18 21:30 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-30 15:17 [PATCH v2 00/15] timers: clean up ARCH_GETTIMEOFFSET, LEGACY_TIMER_TICK Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 01/15] ARM: remove ebsa110 platform Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-11-01 17:28 ` kernel test robot
2020-10-30 15:17 ` [PATCH v2 02/15] net: remove am79c961a driver Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 03/15] timekeeping: remove arch_gettimeoffset Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 04/15] timekeeping: add CONFIG_LEGACY_TIMER_TICK Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 05/15] ia64: convert to legacy_timer_tick Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-12-18 21:29 ` John Paul Adrian Glaubitz [this message]
2020-12-18 21:29 ` John Paul Adrian Glaubitz
2020-12-18 21:29 ` John Paul Adrian Glaubitz
2020-12-18 22:07 ` Arnd Bergmann
2020-12-18 22:07 ` Arnd Bergmann
2020-12-18 22:07 ` Arnd Bergmann
2020-12-18 22:13 ` John Paul Adrian Glaubitz
2020-12-18 22:13 ` John Paul Adrian Glaubitz
2020-12-18 22:13 ` John Paul Adrian Glaubitz
2020-12-18 22:32 ` John Paul Adrian Glaubitz
2020-12-18 22:32 ` John Paul Adrian Glaubitz
2020-12-18 22:32 ` John Paul Adrian Glaubitz
2020-10-30 15:17 ` [PATCH v2 06/15] ARM: rpc: use legacy_timer_tick Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 07/15] parisc: " Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 17:13 ` Helge Deller
2020-10-30 17:13 ` Helge Deller
2020-10-30 17:13 ` Helge Deller
2020-10-30 19:33 ` Arnd Bergmann
2020-10-30 19:33 ` Arnd Bergmann
2020-10-30 19:33 ` Arnd Bergmann
2020-10-30 19:48 ` Helge Deller
2020-10-30 19:48 ` Helge Deller
2020-10-30 19:48 ` Helge Deller
2020-10-30 20:37 ` Arnd Bergmann
2020-10-30 20:37 ` Arnd Bergmann
2020-10-30 20:37 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 08/15] m68k: coldfire: use legacy_timer_tick() Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 09/15] m68k: split heartbeat out of timer function Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 10/15] m68k: sun3/sun3c: use legacy_timer_tick Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 11/15] m68k: m68328: use legacy_timer_tick() Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 12/15] m68k: change remaining timers to legacy_timer_tick Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 13/15] m68k: remove timer_interrupt() function Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 14/15] timekeeping: remove xtime_update Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 15/15] timekeeping: default GENERIC_CLOCKEVENTS to enabled Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-11-01 3:43 ` [PATCH v2 00/15] timers: clean up ARCH_GETTIMEOFFSET, LEGACY_TIMER_TICK Finn Thain
2020-11-01 3:43 ` Finn Thain
2020-11-01 3:43 ` Finn Thain
2020-11-01 9:53 ` Arnd Bergmann
2020-11-01 9:53 ` Arnd Bergmann
2020-11-01 9:53 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=59efce0e-a28d-9424-82ca-fb7f3a1b9c29@physik.fu-berlin.de \
--to=glaubitz@physik.fu-berlin.de \
--cc=James.Bottomley@hansenpartnership.com \
--cc=arnd@arndb.de \
--cc=arnd@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=deller@gmx.de \
--cc=fenghua.yu@intel.com \
--cc=fthain@telegraphics.com.au \
--cc=funaho@jurai.org \
--cc=gerg@linux-m68k.org \
--cc=john.stultz@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ia64@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=linux-parisc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=matorola@gmail.com \
--cc=philb@gnu.org \
--cc=rppt@linux.ibm.com \
--cc=sammy@sammy.net \
--cc=sboyd@kernel.org \
--cc=tglx@linutronix.de \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.