* ath10k-firmware: IPQ4018 hw1.0: Add EnGenius ENS620EXT specific BDFs
@ 2019-03-11 18:41 Steve Glennon
2019-06-28 13:45 ` Kalle Valo
0 siblings, 1 reply; 2+ messages in thread
From: Steve Glennon @ 2019-03-11 18:41 UTC (permalink / raw)
To: ath10k
[-- Attachment #1: Type: text/plain, Size: 1301 bytes --]
Hi,
I am adding support for this device to OpenWrt. This AP requires
two special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board-
id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't
provide special IDs for customers and seems to use the AP-DK board-ids in the
wifi firmware to change its behavior.
Now to the questions from the wiki page [1]:
* description for what hardware this is:
- it is a IPQ4018 based board
- one QCA40xx radio is used as 2.4GHz radio
- one QCA40xx radio is used as 5GHz radio
* origin of the board file (did you create it yourself or where you
downloaded)
- from stock firmware image
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-ENS620EXT
md5sum:
06b06ff901de575a57b054af238c1335
+ bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-ENS620EXT.bin
md5sum:
7cb23e1ff21179de5c4e726552864285
* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
Kind regards,
Steve
[1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles
[-- Attachment #2: bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-ENS620EXT.bin --]
[-- Type: application/macbinary, Size: 12064 bytes --]
[-- Attachment #3: bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-ENS620EXT.bin --]
[-- Type: application/macbinary, Size: 12064 bytes --]
[-- Attachment #4: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: ath10k-firmware: IPQ4018 hw1.0: Add EnGenius ENS620EXT specific BDFs
2019-03-11 18:41 ath10k-firmware: IPQ4018 hw1.0: Add EnGenius ENS620EXT specific BDFs Steve Glennon
@ 2019-06-28 13:45 ` Kalle Valo
0 siblings, 0 replies; 2+ messages in thread
From: Kalle Valo @ 2019-06-28 13:45 UTC (permalink / raw)
To: Steve Glennon; +Cc: ath10k
Steve Glennon <S.Glennon@cablelabs.com> writes:
> I am adding support for this device to OpenWrt. This AP requires
> two special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board-
> id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't
> provide special IDs for customers and seems to use the AP-DK board-ids in the
> wifi firmware to change its behavior.
>
> Now to the questions from the wiki page [1]:
>
> * description for what hardware this is:
>
> - it is a IPQ4018 based board
> - one QCA40xx radio is used as 2.4GHz radio
> - one QCA40xx radio is used as 5GHz radio
>
> * origin of the board file (did you create it yourself or where you
> downloaded)
>
> - from stock firmware image
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>
> - QCA4019 hw1.0
>
> + bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-ENS620EXT
> md5sum:
> 06b06ff901de575a57b054af238c1335
> + bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-ENS620EXT.bin
> md5sum:
> 7cb23e1ff21179de5c4e726552864285
>
> * attach the actual board file (board.bin)
>
> - The name of the files are equal to the id string in the board-2.bin
> (minus the ".bin")
Thanks, added to QCA4019/hw1.0/board-2.bin:
New:
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-ENS620EXT
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-ENS620EXT
Changed:
Deleted:
2 board image(s) added, 0 changed, 0 deleted, 50 in total
https://github.com/kvalo/ath10k-firmware/commit/30a36dcd3c77668891cf12971f80b5cdb4fa851d
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-06-28 13:45 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-11 18:41 ath10k-firmware: IPQ4018 hw1.0: Add EnGenius ENS620EXT specific BDFs Steve Glennon
2019-06-28 13:45 ` Kalle Valo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.