All of lore.kernel.org
 help / color / mirror / Atom feed
From: Baruch Siach <baruch@tkos.co.il>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v3 11/11] configs/solidrun_macchiatobin_efi_defconfig: EFI config for MacchiatoBin
Date: Sat, 19 Dec 2020 20:08:28 +0200	[thread overview]
Message-ID: <87bleppt2b.fsf@tarshish> (raw)
In-Reply-To: <20201218202646.1060123-12-hi@senzilla.io>

Hi Dick,

On Fri, Dec 18 2020, Dick Olsson via buildroot wrote:
> This introduces an alternative board build for the MacchiatoBin based on
> EDK2 (UEFI) firmware loaded as BL33 by ARM Trusted Firmware.
>
> Signed-off-by: Dick Olsson <hi@senzilla.io>
> ---

[...]

> diff --git a/board/solidrun/macchiatobin-efi/readme.txt b/board/solidrun/macchiatobin-efi/readme.txt
> new file mode 100644
> index 0000000000..42205f3d4e
> --- /dev/null
> +++ b/board/solidrun/macchiatobin-efi/readme.txt
> @@ -0,0 +1,14 @@
> +Intro
> +=====
> +
> +This is the board support for MacchiatoBin with UEFI. Refer to
> +board/solidrun/macchiatobin/readme.txt for more information.

Please add a "How to build" section here. The details on the "generic"
readme.txt "How to build" section are not correct for this defconfig.

baruch

> +
> +More info
> +=========
> +
> +For more information about the UEFI support for this board see:
> +
> +- https://developer.solid-run.com/knowledge-base/armada-8040-uefi/
> +- http://wiki.macchiatobin.net/tiki-index.php?page=Build+from+source+-+UEFI+EDK+II
> +- http://wiki.macchiatobin.net/tiki-index.php?page=Update+the+Bootloader

-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -

  reply	other threads:[~2020-12-19 18:08 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-18 20:27 [Buildroot] [PATCH v3 00/11] Introduce EDK2 firmware package Dick Olsson
2020-12-18 20:27 ` [Buildroot] [PATCH v3 01/11] boot/arm-trusted-firmware: Bump to version 2.4 Dick Olsson
2020-12-30  9:30   ` Yann E. MORIN
2020-12-18 20:27 ` [Buildroot] [PATCH v3 02/11] boot/mv-ddr-marvell: Bump to HEAD as of 20201207 Dick Olsson
2020-12-30  9:30   ` Yann E. MORIN
2021-01-09 13:32   ` Sergey Matyukevich
2021-01-10  9:37     ` D. Olsson
2021-01-10  9:47       ` Baruch Siach
2021-01-10 10:09       ` Sergey Matyukevich
2020-12-18 20:27 ` [Buildroot] [PATCH v3 03/11] package/edk2-platforms: new package Dick Olsson
2020-12-30 13:39   ` Yann E. MORIN
2020-12-18 20:27 ` [Buildroot] [PATCH v3 04/11] boot/edk2: " Dick Olsson
2020-12-30 10:51   ` Yann E. MORIN
2020-12-30 20:22     ` D. Olsson
2020-12-30 21:30       ` Yann E. MORIN
2020-12-18 20:27 ` [Buildroot] [PATCH v3 05/11] configs/aarch64_efi_defconfig: build the EDK2 firmware from source Dick Olsson
2020-12-30 12:54   ` Yann E. MORIN
2020-12-18 20:27 ` [Buildroot] [PATCH v3 06/11] configs/pc_x86_64_defconfig: " Dick Olsson
2020-12-18 20:27 ` [Buildroot] [PATCH v3 07/11] boot/arm-trusted-firmware: add EDK2 as BL33 option Dick Olsson
2020-12-30 13:00   ` Yann E. MORIN
2020-12-18 20:27 ` [Buildroot] [PATCH v3 08/11] configs/qemu_aarch64_sbsa_defconfig: new config for QEMU sbsa-ref Dick Olsson
2020-12-30 13:11   ` Yann E. MORIN
2020-12-18 20:27 ` [Buildroot] [PATCH v3 09/11] configs/qemu_aarch64_virt_efi_defconfig: new config for QEMU Virt EFI Dick Olsson
2020-12-30 13:30   ` Yann E. MORIN
2021-01-05  9:09     ` D. Olsson
2020-12-18 20:28 ` [Buildroot] [PATCH v3 10/11] configs/socionext_developerbox_defconfig: new config for Developerbox Dick Olsson
2020-12-18 20:28 ` [Buildroot] [PATCH v3 11/11] configs/solidrun_macchiatobin_efi_defconfig: EFI config for MacchiatoBin Dick Olsson
2020-12-19 18:08   ` Baruch Siach [this message]
2020-12-30 13:41 ` [Buildroot] [PATCH v3 00/11] Introduce EDK2 firmware package Yann E. MORIN

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87bleppt2b.fsf@tarshish \
    --to=baruch@tkos.co.il \
    --cc=buildroot@busybox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.