* [Qemu-devel] [PATCH v2] .gdbinit: load QEMU sub-commands when gdb starts
@ 2017-05-17 12:40 Stefan Hajnoczi
2017-05-17 13:55 ` Alex Bennée
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Stefan Hajnoczi @ 2017-05-17 12:40 UTC (permalink / raw)
To: qemu-devel
Cc: Alex Bennée, Eric Blake, Markus Armbruster, Daniel Berrange,
Stefan Hajnoczi
The scripts/qemu-gdb.py file is not easily discoverable. Add a .gdbinit
file so GDB either loads qemu-gdb.py automatically or prints a message
informing the user how to enable them (some systems disable ./.gdbinit
loading for security reasons).
Symlink .gdbinit and the scripts directory in order to make out-of-tree
builds work. The scripts directory is used to find the qemu-gdb.py file
specified by a relative path in .gdbinit.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
v2:
* Support out-of-tree builds [Daniel, Markus]
configure | 1 +
.gdbinit | 8 ++++++++
2 files changed, 9 insertions(+)
create mode 100644 .gdbinit
diff --git a/configure b/configure
index 57b5ae6..04f7272 100755
--- a/configure
+++ b/configure
@@ -6382,6 +6382,7 @@ FILES="$FILES pc-bios/spapr-rtas/Makefile"
FILES="$FILES pc-bios/s390-ccw/Makefile"
FILES="$FILES roms/seabios/Makefile roms/vgabios/Makefile"
FILES="$FILES pc-bios/qemu-icon.bmp"
+FILES="$FILES .gdbinit scripts" # scripts needed by relative path in .gdbinit
for bios_file in \
$source_path/pc-bios/*.bin \
$source_path/pc-bios/*.lid \
diff --git a/.gdbinit b/.gdbinit
new file mode 100644
index 0000000..9d322fc
--- /dev/null
+++ b/.gdbinit
@@ -0,0 +1,8 @@
+# GDB may have ./.gdbinit loading disabled by default. In that case you can
+# follow the instructions it prints. They boil down to adding the following to
+# your home directory's ~/.gdbinit file:
+#
+# add-auto-load-safe-path /path/to/qemu/.gdbinit
+
+# Load QEMU-specific sub-commands and settings
+source scripts/qemu-gdb.py
--
2.9.3
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [Qemu-devel] [PATCH v2] .gdbinit: load QEMU sub-commands when gdb starts
2017-05-17 12:40 [Qemu-devel] [PATCH v2] .gdbinit: load QEMU sub-commands when gdb starts Stefan Hajnoczi
@ 2017-05-17 13:55 ` Alex Bennée
2017-05-17 15:07 ` Eric Blake
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Alex Bennée @ 2017-05-17 13:55 UTC (permalink / raw)
To: Stefan Hajnoczi
Cc: qemu-devel, Eric Blake, Markus Armbruster, Daniel Berrange
Stefan Hajnoczi <stefanha@redhat.com> writes:
> The scripts/qemu-gdb.py file is not easily discoverable. Add a .gdbinit
> file so GDB either loads qemu-gdb.py automatically or prints a message
> informing the user how to enable them (some systems disable ./.gdbinit
> loading for security reasons).
>
> Symlink .gdbinit and the scripts directory in order to make out-of-tree
> builds work. The scripts directory is used to find the qemu-gdb.py file
> specified by a relative path in .gdbinit.
>
> Suggested-by: Eric Blake <eblake@redhat.com>
> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> v2:
> * Support out-of-tree builds [Daniel, Markus]
>
> configure | 1 +
> .gdbinit | 8 ++++++++
> 2 files changed, 9 insertions(+)
> create mode 100644 .gdbinit
>
> diff --git a/configure b/configure
> index 57b5ae6..04f7272 100755
> --- a/configure
> +++ b/configure
> @@ -6382,6 +6382,7 @@ FILES="$FILES pc-bios/spapr-rtas/Makefile"
> FILES="$FILES pc-bios/s390-ccw/Makefile"
> FILES="$FILES roms/seabios/Makefile roms/vgabios/Makefile"
> FILES="$FILES pc-bios/qemu-icon.bmp"
> +FILES="$FILES .gdbinit scripts" # scripts needed by relative path in .gdbinit
> for bios_file in \
> $source_path/pc-bios/*.bin \
> $source_path/pc-bios/*.lid \
> diff --git a/.gdbinit b/.gdbinit
> new file mode 100644
> index 0000000..9d322fc
> --- /dev/null
> +++ b/.gdbinit
> @@ -0,0 +1,8 @@
> +# GDB may have ./.gdbinit loading disabled by default. In that case you can
> +# follow the instructions it prints. They boil down to adding the following to
> +# your home directory's ~/.gdbinit file:
> +#
> +# add-auto-load-safe-path /path/to/qemu/.gdbinit
> +
> +# Load QEMU-specific sub-commands and settings
> +source scripts/qemu-gdb.py
--
Alex Bennée
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Qemu-devel] [PATCH v2] .gdbinit: load QEMU sub-commands when gdb starts
2017-05-17 12:40 [Qemu-devel] [PATCH v2] .gdbinit: load QEMU sub-commands when gdb starts Stefan Hajnoczi
2017-05-17 13:55 ` Alex Bennée
@ 2017-05-17 15:07 ` Eric Blake
2017-05-17 17:23 ` Philippe Mathieu-Daudé
2017-05-18 9:10 ` Stefan Hajnoczi
3 siblings, 0 replies; 5+ messages in thread
From: Eric Blake @ 2017-05-17 15:07 UTC (permalink / raw)
To: Stefan Hajnoczi, qemu-devel
Cc: Alex Bennée, Markus Armbruster, Daniel Berrange
[-- Attachment #1: Type: text/plain, Size: 855 bytes --]
On 05/17/2017 07:40 AM, Stefan Hajnoczi wrote:
> The scripts/qemu-gdb.py file is not easily discoverable. Add a .gdbinit
> file so GDB either loads qemu-gdb.py automatically or prints a message
> informing the user how to enable them (some systems disable ./.gdbinit
> loading for security reasons).
>
> Symlink .gdbinit and the scripts directory in order to make out-of-tree
> builds work. The scripts directory is used to find the qemu-gdb.py file
> specified by a relative path in .gdbinit.
>
> Suggested-by: Eric Blake <eblake@redhat.com>
> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
> ---
> v2:
> * Support out-of-tree builds [Daniel, Markus]
Tested-by: Eric Blake <eblake@redhat.com>
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3266
Virtualization: qemu.org | libvirt.org
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 604 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Qemu-devel] [PATCH v2] .gdbinit: load QEMU sub-commands when gdb starts
2017-05-17 12:40 [Qemu-devel] [PATCH v2] .gdbinit: load QEMU sub-commands when gdb starts Stefan Hajnoczi
2017-05-17 13:55 ` Alex Bennée
2017-05-17 15:07 ` Eric Blake
@ 2017-05-17 17:23 ` Philippe Mathieu-Daudé
2017-05-18 9:10 ` Stefan Hajnoczi
3 siblings, 0 replies; 5+ messages in thread
From: Philippe Mathieu-Daudé @ 2017-05-17 17:23 UTC (permalink / raw)
To: Stefan Hajnoczi, qemu-devel; +Cc: Alex Bennée, Markus Armbruster
On 05/17/2017 09:40 AM, Stefan Hajnoczi wrote:
> The scripts/qemu-gdb.py file is not easily discoverable. Add a .gdbinit
> file so GDB either loads qemu-gdb.py automatically or prints a message
> informing the user how to enable them (some systems disable ./.gdbinit
> loading for security reasons).
>
> Symlink .gdbinit and the scripts directory in order to make out-of-tree
> builds work. The scripts directory is used to find the qemu-gdb.py file
> specified by a relative path in .gdbinit.
>
> Suggested-by: Eric Blake <eblake@redhat.com>
> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> v2:
> * Support out-of-tree builds [Daniel, Markus]
>
> configure | 1 +
> .gdbinit | 8 ++++++++
> 2 files changed, 9 insertions(+)
> create mode 100644 .gdbinit
>
> diff --git a/configure b/configure
> index 57b5ae6..04f7272 100755
> --- a/configure
> +++ b/configure
> @@ -6382,6 +6382,7 @@ FILES="$FILES pc-bios/spapr-rtas/Makefile"
> FILES="$FILES pc-bios/s390-ccw/Makefile"
> FILES="$FILES roms/seabios/Makefile roms/vgabios/Makefile"
> FILES="$FILES pc-bios/qemu-icon.bmp"
> +FILES="$FILES .gdbinit scripts" # scripts needed by relative path in .gdbinit
> for bios_file in \
> $source_path/pc-bios/*.bin \
> $source_path/pc-bios/*.lid \
> diff --git a/.gdbinit b/.gdbinit
> new file mode 100644
> index 0000000..9d322fc
> --- /dev/null
> +++ b/.gdbinit
> @@ -0,0 +1,8 @@
> +# GDB may have ./.gdbinit loading disabled by default. In that case you can
> +# follow the instructions it prints. They boil down to adding the following to
> +# your home directory's ~/.gdbinit file:
> +#
> +# add-auto-load-safe-path /path/to/qemu/.gdbinit
> +
> +# Load QEMU-specific sub-commands and settings
> +source scripts/qemu-gdb.py
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Qemu-devel] [PATCH v2] .gdbinit: load QEMU sub-commands when gdb starts
2017-05-17 12:40 [Qemu-devel] [PATCH v2] .gdbinit: load QEMU sub-commands when gdb starts Stefan Hajnoczi
` (2 preceding siblings ...)
2017-05-17 17:23 ` Philippe Mathieu-Daudé
@ 2017-05-18 9:10 ` Stefan Hajnoczi
3 siblings, 0 replies; 5+ messages in thread
From: Stefan Hajnoczi @ 2017-05-18 9:10 UTC (permalink / raw)
To: Stefan Hajnoczi; +Cc: qemu-devel, Alex Bennée, Markus Armbruster
[-- Attachment #1: Type: text/plain, Size: 911 bytes --]
On Wed, May 17, 2017 at 01:40:42PM +0100, Stefan Hajnoczi wrote:
> The scripts/qemu-gdb.py file is not easily discoverable. Add a .gdbinit
> file so GDB either loads qemu-gdb.py automatically or prints a message
> informing the user how to enable them (some systems disable ./.gdbinit
> loading for security reasons).
>
> Symlink .gdbinit and the scripts directory in order to make out-of-tree
> builds work. The scripts directory is used to find the qemu-gdb.py file
> specified by a relative path in .gdbinit.
>
> Suggested-by: Eric Blake <eblake@redhat.com>
> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
> ---
> v2:
> * Support out-of-tree builds [Daniel, Markus]
>
> configure | 1 +
> .gdbinit | 8 ++++++++
> 2 files changed, 9 insertions(+)
> create mode 100644 .gdbinit
Thanks, applied to my block tree:
https://github.com/stefanha/qemu/commits/block
Stefan
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 455 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-05-18 9:10 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-05-17 12:40 [Qemu-devel] [PATCH v2] .gdbinit: load QEMU sub-commands when gdb starts Stefan Hajnoczi
2017-05-17 13:55 ` Alex Bennée
2017-05-17 15:07 ` Eric Blake
2017-05-17 17:23 ` Philippe Mathieu-Daudé
2017-05-18 9:10 ` Stefan Hajnoczi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.