From: "Jernej Škrabec" <jernej.skrabec@gmail.com> To: Samuel Holland <samuel@sholland.org>, Chen-Yu Tsai <wens@csie.org>, Andre Przywara <andre.przywara@arm.com> Cc: Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Icenowy Zheng <icenowy@aosc.io>, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v11 6/6] arm64: dts: allwinner: h616: Add X96 Mate TV box support Date: Tue, 03 May 2022 21:44:51 +0200 [thread overview] Message-ID: <8928776.CDJkKcVGEf@kista> (raw) In-Reply-To: <20220428230933.15262-7-andre.przywara@arm.com> Similar comments as for OrangePi Zero2... Dne petek, 29. april 2022 ob 01:09:33 CEST je Andre Przywara napisal(a): > The X96 Mate is an Allwinner H616 based TV box, featuring: > - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU > - 2GiB/4GiB RAM (fully usable!) > - 16/32/64GiB eMMC > - 100Mbps Ethernet (via embedded AC200 EPHY, not yet supported) > - Unsupported Allwinner WiFi chip > - 2 x USB 2.0 host ports > - HDMI port > - IR receiver > - 5V/2A DC power supply via barrel plug > > For more information see: https://linux-sunxi.org/X96_Mate Please remove external links. > > Add a basic devicetree for it, with SD card and eMMC working, as > well as serial and the essential peripherals, like the AXP PMIC. > > This DT is somewhat minimal, and should work on many other similar TV > boxes with the Allwinner H616 chip. > > Signed-off-by: Andre Przywara <andre.przywara@arm.com> > --- > arch/arm64/boot/dts/allwinner/Makefile | 1 + > .../dts/allwinner/sun50i-h616-x96-mate.dts | 177 ++++++++++++++++++ > 2 files changed, 178 insertions(+) > create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts > > diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/ allwinner/Makefile > index df2214e6d946..6a96494a2e0a 100644 > --- a/arch/arm64/boot/dts/allwinner/Makefile > +++ b/arch/arm64/boot/dts/allwinner/Makefile > @@ -39,3 +39,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb > +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts b/arch/ arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts > new file mode 100644 > index 000000000000..aedb3a3dff38 > --- /dev/null > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts > @@ -0,0 +1,177 @@ > +// SPDX-License-Identifier: (GPL-2.0+ or MIT) > +/* > + * Copyright (C) 2021 Arm Ltd. 2022? > + */ > + > +/dts-v1/; > + > +#include "sun50i-h616.dtsi" > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > + > +/ { > + model = "X96 Mate"; > + compatible = "hechuang,x96-mate", "allwinner,sun50i-h616"; > + > + aliases { > + serial0 = &uart0; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + reg_vcc5v: vcc5v { > + /* board wide 5V supply directly from the DC input */ > + compatible = "regulator-fixed"; > + regulator-name = "vcc-5v"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > +}; > + > +&ir { > + status = "okay"; > +}; > + > +&mmc0 { > + vmmc-supply = <®_dcdce>; > + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ > + bus-width = <4>; > + status = "okay"; > +}; > + > +&mmc2 { > + vmmc-supply = <®_dcdce>; > + vqmmc-supply = <®_bldo1>; > + bus-width = <8>; > + non-removable; > + cap-mmc-hw-reset; > + mmc-ddr-1_8v; > + mmc-hs200-1_8v; > + status = "okay"; > +}; > + > +&r_rsb { > + status = "okay"; > + > + axp305: pmic@745 { > + compatible = "x-powers,axp305", "x-powers,axp805", > + "x-powers,axp806"; > + interrupt-controller; > + #interrupt-cells = <1>; > + reg = <0x745>; > + > + x-powers,self-working-mode; > + vina-supply = <®_vcc5v>; > + vinb-supply = <®_vcc5v>; > + vinc-supply = <®_vcc5v>; > + vind-supply = <®_vcc5v>; > + vine-supply = <®_vcc5v>; > + aldoin-supply = <®_vcc5v>; > + bldoin-supply = <®_vcc5v>; > + cldoin-supply = <®_vcc5v>; > + > + regulators { > + reg_aldo1: aldo1 { > + regulator-always-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc-sys"; > + }; > + > + /* Enabled by the Android BSP */ > + reg_aldo2: aldo2 { > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc3v3-ext"; > + status = "disabled"; > + }; > + > + /* Enabled by the Android BSP */ > + reg_aldo3: aldo3 { > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc3v3-ext2"; > + status = "disabled"; > + }; > + > + reg_bldo1: bldo1 { > + regulator-always-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc1v8"; > + }; > + > + /* Enabled by the Android BSP */ > + reg_bldo2: bldo2 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc1v8-2"; > + status = "disabled"; > + }; > + > + bldo3 { > + /* unused */ > + }; > + > + bldo4 { > + /* unused */ > + }; > + > + cldo1 { > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + regulator-name = "vcc2v5"; > + }; > + > + cldo2 { > + /* unused */ > + }; > + > + cldo3 { > + /* unused */ > + }; > + > + reg_dcdca: dcdca { > + regulator-always-on; > + regulator-min-microvolt = <810000>; > + regulator-max-microvolt = <1080000>; > + regulator-name = "vdd-cpu"; > + }; > + > + reg_dcdcc: dcdcc { > + regulator-always-on; > + regulator-min-microvolt = <810000>; > + regulator-max-microvolt = <1080000>; > + regulator-name = "vdd-gpu-sys"; > + }; > + > + reg_dcdcd: dcdcd { > + regulator-always-on; > + regulator-min-microvolt = <1360000>; > + regulator-max-microvolt = <1360000>; > + regulator-name = "vdd-dram"; > + }; > + > + reg_dcdce: dcdce { > + regulator-boot-on; Did you check if reboot (when booted from SD card) works? It should have same issue as OrangePi Zero2. Please also check and add pio power supplies. Best regards, Jernej > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc-eth-mmc"; > + }; > + > + sw { > + /* unused */ > + }; > + }; > + }; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_ph_pins>; > + status = "okay"; > +}; > -- > 2.35.3 > >
WARNING: multiple messages have this Message-ID (diff)
From: "Jernej Škrabec" <jernej.skrabec@gmail.com> To: Samuel Holland <samuel@sholland.org>, Chen-Yu Tsai <wens@csie.org>, Andre Przywara <andre.przywara@arm.com> Cc: Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Icenowy Zheng <icenowy@aosc.io>, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v11 6/6] arm64: dts: allwinner: h616: Add X96 Mate TV box support Date: Tue, 03 May 2022 21:44:51 +0200 [thread overview] Message-ID: <8928776.CDJkKcVGEf@kista> (raw) In-Reply-To: <20220428230933.15262-7-andre.przywara@arm.com> Similar comments as for OrangePi Zero2... Dne petek, 29. april 2022 ob 01:09:33 CEST je Andre Przywara napisal(a): > The X96 Mate is an Allwinner H616 based TV box, featuring: > - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU > - 2GiB/4GiB RAM (fully usable!) > - 16/32/64GiB eMMC > - 100Mbps Ethernet (via embedded AC200 EPHY, not yet supported) > - Unsupported Allwinner WiFi chip > - 2 x USB 2.0 host ports > - HDMI port > - IR receiver > - 5V/2A DC power supply via barrel plug > > For more information see: https://linux-sunxi.org/X96_Mate Please remove external links. > > Add a basic devicetree for it, with SD card and eMMC working, as > well as serial and the essential peripherals, like the AXP PMIC. > > This DT is somewhat minimal, and should work on many other similar TV > boxes with the Allwinner H616 chip. > > Signed-off-by: Andre Przywara <andre.przywara@arm.com> > --- > arch/arm64/boot/dts/allwinner/Makefile | 1 + > .../dts/allwinner/sun50i-h616-x96-mate.dts | 177 ++++++++++++++++++ > 2 files changed, 178 insertions(+) > create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts > > diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/ allwinner/Makefile > index df2214e6d946..6a96494a2e0a 100644 > --- a/arch/arm64/boot/dts/allwinner/Makefile > +++ b/arch/arm64/boot/dts/allwinner/Makefile > @@ -39,3 +39,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb > +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts b/arch/ arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts > new file mode 100644 > index 000000000000..aedb3a3dff38 > --- /dev/null > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts > @@ -0,0 +1,177 @@ > +// SPDX-License-Identifier: (GPL-2.0+ or MIT) > +/* > + * Copyright (C) 2021 Arm Ltd. 2022? > + */ > + > +/dts-v1/; > + > +#include "sun50i-h616.dtsi" > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > + > +/ { > + model = "X96 Mate"; > + compatible = "hechuang,x96-mate", "allwinner,sun50i-h616"; > + > + aliases { > + serial0 = &uart0; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + reg_vcc5v: vcc5v { > + /* board wide 5V supply directly from the DC input */ > + compatible = "regulator-fixed"; > + regulator-name = "vcc-5v"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > +}; > + > +&ir { > + status = "okay"; > +}; > + > +&mmc0 { > + vmmc-supply = <®_dcdce>; > + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ > + bus-width = <4>; > + status = "okay"; > +}; > + > +&mmc2 { > + vmmc-supply = <®_dcdce>; > + vqmmc-supply = <®_bldo1>; > + bus-width = <8>; > + non-removable; > + cap-mmc-hw-reset; > + mmc-ddr-1_8v; > + mmc-hs200-1_8v; > + status = "okay"; > +}; > + > +&r_rsb { > + status = "okay"; > + > + axp305: pmic@745 { > + compatible = "x-powers,axp305", "x-powers,axp805", > + "x-powers,axp806"; > + interrupt-controller; > + #interrupt-cells = <1>; > + reg = <0x745>; > + > + x-powers,self-working-mode; > + vina-supply = <®_vcc5v>; > + vinb-supply = <®_vcc5v>; > + vinc-supply = <®_vcc5v>; > + vind-supply = <®_vcc5v>; > + vine-supply = <®_vcc5v>; > + aldoin-supply = <®_vcc5v>; > + bldoin-supply = <®_vcc5v>; > + cldoin-supply = <®_vcc5v>; > + > + regulators { > + reg_aldo1: aldo1 { > + regulator-always-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc-sys"; > + }; > + > + /* Enabled by the Android BSP */ > + reg_aldo2: aldo2 { > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc3v3-ext"; > + status = "disabled"; > + }; > + > + /* Enabled by the Android BSP */ > + reg_aldo3: aldo3 { > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc3v3-ext2"; > + status = "disabled"; > + }; > + > + reg_bldo1: bldo1 { > + regulator-always-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc1v8"; > + }; > + > + /* Enabled by the Android BSP */ > + reg_bldo2: bldo2 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc1v8-2"; > + status = "disabled"; > + }; > + > + bldo3 { > + /* unused */ > + }; > + > + bldo4 { > + /* unused */ > + }; > + > + cldo1 { > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + regulator-name = "vcc2v5"; > + }; > + > + cldo2 { > + /* unused */ > + }; > + > + cldo3 { > + /* unused */ > + }; > + > + reg_dcdca: dcdca { > + regulator-always-on; > + regulator-min-microvolt = <810000>; > + regulator-max-microvolt = <1080000>; > + regulator-name = "vdd-cpu"; > + }; > + > + reg_dcdcc: dcdcc { > + regulator-always-on; > + regulator-min-microvolt = <810000>; > + regulator-max-microvolt = <1080000>; > + regulator-name = "vdd-gpu-sys"; > + }; > + > + reg_dcdcd: dcdcd { > + regulator-always-on; > + regulator-min-microvolt = <1360000>; > + regulator-max-microvolt = <1360000>; > + regulator-name = "vdd-dram"; > + }; > + > + reg_dcdce: dcdce { > + regulator-boot-on; Did you check if reboot (when booted from SD card) works? It should have same issue as OrangePi Zero2. Please also check and add pio power supplies. Best regards, Jernej > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc-eth-mmc"; > + }; > + > + sw { > + /* unused */ > + }; > + }; > + }; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_ph_pins>; > + status = "okay"; > +}; > -- > 2.35.3 > > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-05-03 19:44 UTC|newest] Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-04-28 23:09 [PATCH v11 0/6] arm64: sunxi: Initial Allwinner H616 SoC support Andre Przywara 2022-04-28 23:09 ` Andre Przywara 2022-04-28 23:09 ` [PATCH v11 1/6] clk: sunxi-ng: h6-r: Add RTC gate clock Andre Przywara 2022-04-28 23:09 ` Andre Przywara 2022-05-03 2:06 ` Samuel Holland 2022-05-03 2:06 ` Samuel Holland 2022-05-06 16:10 ` Jernej Škrabec 2022-05-06 16:10 ` Jernej Škrabec 2022-04-28 23:09 ` [PATCH v11 2/6] clk: sunxi-ng: h616: Add PLL derived 32KHz clock Andre Przywara 2022-04-28 23:09 ` Andre Przywara 2022-05-06 16:11 ` Jernej Škrabec 2022-05-06 16:11 ` Jernej Škrabec 2022-04-28 23:09 ` [PATCH v11 3/6] arm64: dts: allwinner: Add Allwinner H616 .dtsi file Andre Przywara 2022-04-28 23:09 ` Andre Przywara 2022-05-03 19:05 ` Jernej Škrabec 2022-05-03 19:05 ` Jernej Škrabec 2022-05-03 19:41 ` Jernej Škrabec 2022-05-03 19:41 ` Jernej Škrabec 2022-06-30 0:04 ` Andre Przywara 2022-06-30 0:04 ` Andre Przywara 2022-07-02 21:16 ` Jernej Škrabec 2022-07-02 21:16 ` Jernej Škrabec 2022-07-04 13:30 ` Andre Przywara 2022-07-04 13:30 ` Andre Przywara 2022-07-04 18:42 ` Jernej Škrabec 2022-07-04 18:42 ` Jernej Škrabec 2022-07-04 21:58 ` Andre Przywara 2022-07-04 21:58 ` Andre Przywara 2022-07-05 17:32 ` Jernej Škrabec 2022-07-05 17:32 ` Jernej Škrabec 2022-07-06 13:16 ` Andre Przywara 2022-07-06 13:16 ` Andre Przywara 2022-07-07 6:30 ` Samuel Holland 2022-07-07 6:30 ` Samuel Holland 2022-07-07 16:39 ` Jernej Škrabec 2022-07-07 16:39 ` Jernej Škrabec 2022-07-08 9:47 ` Andre Przywara 2022-07-08 9:47 ` Andre Przywara 2022-07-04 18:44 ` Samuel Holland 2022-07-04 18:44 ` Samuel Holland 2022-07-04 20:52 ` Andre Przywara 2022-07-04 20:52 ` Andre Przywara 2022-04-28 23:09 ` [PATCH v11 4/6] dt-bindings: arm: sunxi: Add two H616 board compatible strings Andre Przywara 2022-04-28 23:09 ` Andre Przywara 2022-04-28 23:09 ` [PATCH v11 5/6] arm64: dts: allwinner: h616: Add OrangePi Zero 2 board support Andre Przywara 2022-04-28 23:09 ` Andre Przywara 2022-05-03 19:41 ` Jernej Škrabec 2022-05-03 19:41 ` Jernej Škrabec 2022-06-30 0:08 ` Andre Przywara 2022-06-30 0:08 ` Andre Przywara 2022-04-28 23:09 ` [PATCH v11 6/6] arm64: dts: allwinner: h616: Add X96 Mate TV box support Andre Przywara 2022-04-28 23:09 ` Andre Przywara 2022-05-03 19:44 ` Jernej Škrabec [this message] 2022-05-03 19:44 ` Jernej Škrabec
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=8928776.CDJkKcVGEf@kista \ --to=jernej.skrabec@gmail.com \ --cc=andre.przywara@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=icenowy@aosc.io \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-sunxi@lists.linux.dev \ --cc=robh@kernel.org \ --cc=samuel@sholland.org \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.