[PATCH 17/18] irqchip: Replace setup_irq() by request_irq()

From: afzal mohammed <afzal.mohd.ma@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>,
	Jason Cooper <jason@lakedaemon.net>,
	Marc Zyngier <maz@kernel.org>,
	Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH 17/18] irqchip: Replace setup_irq() by request_irq()
Date: Wed, 12 Feb 2020 13:35:53 +0530	[thread overview]
Message-ID: <8e00874d072f32496c2d0da05423bda1cadd6975.1581478324.git.afzal.mohd.ma@gmail.com> (raw)
In-Reply-To: <cover.1581478323.git.afzal.mohd.ma@gmail.com>

request_irq() is preferred over setup_irq(). Existing callers of
setup_irq() reached mostly via 'init_IRQ()' & 'time_init()', while
memory allocators are ready by 'mm_init()'.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

Seldom remove_irq() usage has been observed coupled with setup_irq(),
wherever that has been found, it too has been replaced by free_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
---

Since cc'ing cover letter to all maintainers/reviewers would be too
many, refer for cover letter,
 https://lkml.kernel.org/r/cover.1581478323.git.afzal.mohd.ma@gmail.com

 drivers/irqchip/irq-i8259.c   |  9 +++------
 drivers/irqchip/irq-ingenic.c | 11 +++++------
 2 files changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/irqchip/irq-i8259.c b/drivers/irqchip/irq-i8259.c
index d000870d9b6b..e9798d02b256 100644
--- a/drivers/irqchip/irq-i8259.c
+++ b/drivers/irqchip/irq-i8259.c
@@ -271,11 +271,6 @@ static void init_8259A(int auto_eoi)
 /*
  * IRQ2 is cascade interrupt to second interrupt controller
  */
-static struct irqaction irq2 = {
-	.handler = no_action,
-	.name = "cascade",
-	.flags = IRQF_NO_THREAD,
-};
 
 static struct resource pic1_io_resource = {
 	.name = "pic1",
@@ -323,7 +318,9 @@ struct irq_domain * __init __init_i8259_irqs(struct device_node *node)
 	if (!domain)
 		panic("Failed to add i8259 IRQ domain");
 
-	setup_irq(I8259A_IRQ_BASE + PIC_CASCADE_IR, &irq2);
+	if (request_irq(I8259A_IRQ_BASE + PIC_CASCADE_IR, no_action,
+			IRQF_NO_THREAD, "cascade", NULL))
+		pr_err("request_irq() on %s failed\n", "cascade");
 	register_syscore_ops(&i8259_syscore_ops);
 	return domain;
 }
diff --git a/drivers/irqchip/irq-ingenic.c b/drivers/irqchip/irq-ingenic.c
index c5589ee0dfb3..5b20a0f0ece8 100644
--- a/drivers/irqchip/irq-ingenic.c
+++ b/drivers/irqchip/irq-ingenic.c
@@ -58,11 +58,6 @@ static irqreturn_t intc_cascade(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction intc_cascade_action = {
-	.handler = intc_cascade,
-	.name = "SoC intc cascade interrupt",
-};
-
 static int __init ingenic_intc_of_init(struct device_node *node,
 				       unsigned num_chips)
 {
@@ -130,7 +125,11 @@ static int __init ingenic_intc_of_init(struct device_node *node,
 		irq_reg_writel(gc, IRQ_MSK(32), JZ_REG_INTC_SET_MASK);
 	}
 
-	setup_irq(parent_irq, &intc_cascade_action);
+	if (request_irq(parent_irq, intc_cascade, 0,
+			"SoC intc cascade interrupt", NULL)) {
+		pr_err("request_irq() on %s failed\n",
+		       "SoC intc cascade interrupt");
+	}
 	return 0;
 
 out_domain_remove:
-- 
2.24.1

