[U-Boot] u-boot-dm crashes on NVIDIA Jetson TX1 running "version"

[U-Boot] u-boot-dm crashes on NVIDIA Jetson TX1 running "version"

[Stephen Warren]

Simon,

With the latest code in u-boot-dm.git/master, the "version" command
crashes on p2371-2180 (NVIDIA Jetson TX1); see log below. Preliminary
results show complete failure on Beaver and Jetson TK1 (the tests are
running so I can't see the full logs yet, but every py.test test that's
completed so far results in an error, so perhaps the same issue or
perhaps something else)

U-Boot 2017.07-rc1-19807-g9fb9a18fd8 (Jun 08 2017 - 18:22:11 -0600),
Build: jenkins-u-boot-denx_uboot_dm-master-buildTEGRA210
Model: NVIDIA P2371-2180
Board: NVIDIA P2371-2180
DRAM:  3.5 GiB
MMC:   sdhci at 700b0000: 1, sdhci at 700b0600: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  2 %08%08%08 0
Tegra210 (P2371-2180) #
[-] Stream: console
Tegra210 (P2371-2180) # version
U-Boot 2017.07-rc1-19807-g9fb9a18fd8 (Jun 08 2017 - 18:22:11 -0600),
Build: jenkins-u-boot-denx_uboot_dm-master-build-Uaarch64-linux-gnu-gcc
(Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) 4.8.4
GNU ld (GNU Binutils for Ubuntu) 2.24
"Synchronous Abort" handler, esr 0x96000021
ELR:     dff437b0
LR:      dff43d94
x0 : 000000000000000b x1 : 0000000000000000
x2 : 0000000000000001 x3 : 0000000000000002
x4 : 0000000070006000 x5 : ffffff80ffffffc8
x6 : 0000000000000000 x7 : 00000000dda27360
x8 : 0000000000000001 x9 : 0000000000000008
x10: 000000000000000d x11: 0000000000000006
x12: 00000000dff86000 x13: 0000000000000040
x14: 0000000000000001 x15: 00000000dff31404
x16: 00000000000ffff0 x17: 0000000000010000
x18: 00000000dda2cdf0 x19: 000000000000000b
x20: ffffffffffffffff x21: 0000000000000000
x22: 0000000000000000 x23: 0000000000000000
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000001 x27: 000000000000000b
x28: 0000000000000000 x29: 00000000dda27460

Resetting CPU ...

[U-Boot] u-boot-dm crashes on NVIDIA Jetson TX1 running "version"

[Stephen Warren]

On 06/08/2017 07:02 PM, Stephen Warren wrote:
> Simon,
> 
> With the latest code in u-boot-dm.git/master, the "version" command
> crashes on p2371-2180 (NVIDIA Jetson TX1); see log below. Preliminary
> results show complete failure on Beaver and Jetson TK1 (the tests are
> running so I can't see the full logs yet, but every py.test test that's
> completed so far results in an error, so perhaps the same issue or
> perhaps something else)

Beaver and Jetson never even get to the prompt:


U-Boot SPL 2017.07-rc1-19807-g9fb9a18 (Jun 08 2017 - 17:17:22)
Trying to boot from RAM


U-Boot 2017.07-rc1-19807-g9fb9a18 (Jun 08 2017 - 17:17:22 -0700), Build:
jenkins-u-boot-denx_uboot_dm-master-build-U_TEGRA30
Model: NVIDIA Beaver
Board: NVIDIA Beaver
DRAM:  2 GiB
<<nothing else printed>>



U-Boot SPL 2017.07-rc1-19807-g9fb9a18 (Jun 08 2017 - 17:18:14)
Trying to boot from RAM


U-Boot 2017.07-rc1-19807-g9fb9a18 (Jun 08 2017 - 17:18:14 -0700), Build:
jenkins-u-boot-denx_uboot_dm-master-build-U_TEGRA124
Model: NVIDIA Jetson TK1
Board: NVIDIA Jetson TK1
DRAM:  2 GiB
<<nothing else printed>>

[U-Boot] u-boot-dm crashes on NVIDIA Jetson TX1 running "version"

[Simon Glass]

Hi Stephen,

On 8 June 2017 at 19:15, Stephen Warren <swarren@wwwdotorg.org> wrote:
>
> On 06/08/2017 07:02 PM, Stephen Warren wrote:
> > Simon,
> >
> > With the latest code in u-boot-dm.git/master, the "version" command
> > crashes on p2371-2180 (NVIDIA Jetson TX1); see log below. Preliminary
> > results show complete failure on Beaver and Jetson TK1 (the tests are
> > running so I can't see the full logs yet, but every py.test test that's
> > completed so far results in an error, so perhaps the same issue or
> > perhaps something else)
>
> Beaver and Jetson never even get to the prompt:
>
>
> U-Boot SPL 2017.07-rc1-19807-g9fb9a18 (Jun 08 2017 - 17:17:22)
> Trying to boot from RAM
>
>
> U-Boot 2017.07-rc1-19807-g9fb9a18 (Jun 08 2017 - 17:17:22 -0700), Build:
> jenkins-u-boot-denx_uboot_dm-master-build-U_TEGRA30
> Model: NVIDIA Beaver
> Board: NVIDIA Beaver
> DRAM:  2 GiB
> <<nothing else printed>>
>
>
>
> U-Boot SPL 2017.07-rc1-19807-g9fb9a18 (Jun 08 2017 - 17:18:14)
> Trying to boot from RAM
>
>
> U-Boot 2017.07-rc1-19807-g9fb9a18 (Jun 08 2017 - 17:18:14 -0700), Build:
> jenkins-u-boot-denx_uboot_dm-master-build-U_TEGRA124
> Model: NVIDIA Jetson TK1
> Board: NVIDIA Jetson TK1
> DRAM:  2 GiB
> <<nothing else printed>>

Can you try without BUILD_TAG?

Regards,
Simon