All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ondřej Jirman" <megous@megous.com>
To: Mark Brown <broonie@kernel.org>
Cc: dev@linux-sunxi.org, linux-arm-kernel@lists.infradead.org,
	Liam Girdwood <lgirdwood@gmail.com>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 04/14] regulator: SY8106A regulator driver
Date: Tue, 28 Jun 2016 18:27:34 +0200	[thread overview]
Message-ID: <99d5e0d0-f2d6-d1c7-21fd-9b9c6edb76a2@megous.com> (raw)
In-Reply-To: <20160627145400.GY28202@sirena.org.uk>


[-- Attachment #1.1: Type: text/plain, Size: 1990 bytes --]

On 27.6.2016 16:54, Mark Brown wrote:
> On Sun, Jun 26, 2016 at 05:07:16PM +0200, Ondřej Jirman wrote:
>> On 26.6.2016 13:26, Mark Brown wrote:
> 
>>> I'm missing almost all of this series, I've just got this and another
>>> patch which look like a standalone driver so it's hard to see any
>>> dependencies.  What's going on here?
> 
>> Sorry, it's this series:
>> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-June/438981.html
> 
>> And here's v1 intro letter:
>> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-June/438794.html
> 
> These aren't really enlightening I'm afraid, there's nothing in there
> about why these are a single series and no dependency information.
> Indeed it looks like something is really confused as the thread is
> missing at least patches 2 and 3.
> 

You're right there's not much about the regulator there. Xulong Orange
Pi PC is ARM SBC, that uses Allwinner H3 Soc, to which this regulator is
connected via I2C bus, to regulate the main CPU supply voltage. It is
used on some other SBC's from Xulong.

It is fairly simple single output, fixed I2C address voltage regulator.
It has just 3 registers, which allow for: slew rate control (not used in
this driver), setting and reading out the voltage, switching between
voltage set via I2C and via external resistor divider and
enabling/disabling output. It also has status reporting for
over-tempertature and over-current conditions. That's all the features
it has.

The patch series uses it to provide dynamic vltage scaling of the ARM
cores in the SoC to be able to achieve higher CPU frequency.

Datasheet is here:

https://01916271185794791722.googlegroups.com/attach/93415fbd5402/SY8106A_datasheet.pdf?part=0.1&vt=ANaJVrHMej8w8XRfd-7A3XoyiryMDDhrHU2SS-tYyHCpOIXRqIaICOIlZTWAUV74vToesmic457zPvODDuvrNnRpomPOPbtV8bMMFV65VX5aYb5NciMkh8E

I'll also include this information in the revised patch.

thank you and regards,
  Ondrej Jirman


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

WARNING: multiple messages have this Message-ID (diff)
From: megous@megous.com (Ondřej Jirman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 04/14] regulator: SY8106A regulator driver
Date: Tue, 28 Jun 2016 18:27:34 +0200	[thread overview]
Message-ID: <99d5e0d0-f2d6-d1c7-21fd-9b9c6edb76a2@megous.com> (raw)
In-Reply-To: <20160627145400.GY28202@sirena.org.uk>

On 27.6.2016 16:54, Mark Brown wrote:
> On Sun, Jun 26, 2016 at 05:07:16PM +0200, Ond?ej Jirman wrote:
>> On 26.6.2016 13:26, Mark Brown wrote:
> 
>>> I'm missing almost all of this series, I've just got this and another
>>> patch which look like a standalone driver so it's hard to see any
>>> dependencies.  What's going on here?
> 
>> Sorry, it's this series:
>> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-June/438981.html
> 
>> And here's v1 intro letter:
>> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-June/438794.html
> 
> These aren't really enlightening I'm afraid, there's nothing in there
> about why these are a single series and no dependency information.
> Indeed it looks like something is really confused as the thread is
> missing at least patches 2 and 3.
> 

You're right there's not much about the regulator there. Xulong Orange
Pi PC is ARM SBC, that uses Allwinner H3 Soc, to which this regulator is
connected via I2C bus, to regulate the main CPU supply voltage. It is
used on some other SBC's from Xulong.

It is fairly simple single output, fixed I2C address voltage regulator.
It has just 3 registers, which allow for: slew rate control (not used in
this driver), setting and reading out the voltage, switching between
voltage set via I2C and via external resistor divider and
enabling/disabling output. It also has status reporting for
over-tempertature and over-current conditions. That's all the features
it has.

The patch series uses it to provide dynamic vltage scaling of the ARM
cores in the SoC to be able to achieve higher CPU frequency.

Datasheet is here:

https://01916271185794791722.googlegroups.com/attach/93415fbd5402/SY8106A_datasheet.pdf?part=0.1&vt=ANaJVrHMej8w8XRfd-7A3XoyiryMDDhrHU2SS-tYyHCpOIXRqIaICOIlZTWAUV74vToesmic457zPvODDuvrNnRpomPOPbtV8bMMFV65VX5aYb5NciMkh8E

I'll also include this information in the revised patch.

thank you and regards,
  Ondrej Jirman

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160628/e4ec00eb/attachment.sig>

  reply	other threads:[~2016-06-28 16:27 UTC|newest]

Thread overview: 183+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-25  3:44 [PATCH v2] Thermal regulation for Orange Pi PC and Orange Pi One megous at megous.com
2016-06-25  3:44 ` [PATCH v2 01/14] ARM: clk: sunxi: Add driver for the H3 THS clock megous
2016-06-25  3:44   ` megous at megous.com
2016-06-25  3:44   ` megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-25  7:13   ` Maxime Ripard
2016-06-25  7:13     ` Maxime Ripard
2016-06-25  7:13     ` Maxime Ripard
2016-06-25 15:23     ` Ondřej Jirman
2016-06-25 15:23       ` Ondřej Jirman
2016-06-25 15:23       ` Ondřej Jirman
2016-06-28 11:52       ` Maxime Ripard
2016-06-28 11:52         ` Maxime Ripard
2016-06-28 11:52         ` Maxime Ripard
2016-06-25  3:44 ` [PATCH v2 02/14] thermal: sun8i_ths: Add support for the thermal sensor on Allwinner H3 megous
2016-06-25  3:44   ` megous at megous.com
2016-06-25  3:44   ` megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-25  7:10   ` Maxime Ripard
2016-06-25  7:10     ` Maxime Ripard
2016-06-25 15:12     ` Ondřej Jirman
2016-06-25 15:12       ` Ondřej Jirman
2016-06-28 11:39       ` Maxime Ripard
2016-06-28 11:39         ` Maxime Ripard
2016-06-28 11:39         ` Maxime Ripard
2016-06-25  3:45 ` [PATCH v2 03/14] dt-bindings: document sun8i_ths - H3 thermal sensor driver megous
2016-06-25  3:45   ` megous at megous.com
2016-06-25  3:45   ` megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-28 20:56   ` Rob Herring
2016-06-28 20:56     ` Rob Herring
2016-06-28 20:56     ` Rob Herring
2016-06-25  3:45 ` [PATCH v2 04/14] regulator: SY8106A regulator driver megous
2016-06-25  3:45   ` megous at megous.com
2016-06-26 11:26   ` Mark Brown
2016-06-26 11:26     ` Mark Brown
2016-06-26 15:07     ` Ondřej Jirman
2016-06-26 15:07       ` Ondřej Jirman
2016-06-27 14:54       ` Mark Brown
2016-06-27 14:54         ` Mark Brown
2016-06-28 16:27         ` Ondřej Jirman [this message]
2016-06-28 16:27           ` Ondřej Jirman
2016-06-27 15:10   ` Mark Brown
2016-06-27 15:10     ` Mark Brown
2016-06-25  3:45 ` [PATCH v2 05/14] dt-bindings: document " megous
2016-06-25  3:45   ` megous at megous.com
2016-06-25  3:45   ` megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-26 11:27   ` Mark Brown
2016-06-26 11:27     ` Mark Brown
2016-06-26 11:27     ` Mark Brown
2016-06-26 15:10     ` Ondřej Jirman
2016-06-26 15:10       ` Ondřej Jirman
2016-06-26 15:10       ` Ondřej Jirman
2016-06-26 18:52       ` Mark Brown
2016-06-26 18:52         ` Mark Brown
2016-06-26 18:52         ` Mark Brown
2016-06-25  3:45 ` [PATCH v2 06/14] ARM: sun8i: clk: Add clk-factor rate application method megous
2016-06-25  3:45   ` megous at megous.com
2016-06-25  3:45   ` megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-30 20:40   ` Maxime Ripard
2016-06-30 20:40     ` Maxime Ripard
2016-06-30 20:40     ` Maxime Ripard
2016-07-01  0:50     ` Ondřej Jirman
2016-07-01  0:50       ` Ondřej Jirman
2016-07-01  0:50       ` Ondřej Jirman
2016-07-01  5:37       ` Jean-Francois Moine
2016-07-01  5:37         ` Jean-Francois Moine
2016-07-01  6:34         ` Ondřej Jirman
2016-07-01  6:34           ` Ondřej Jirman
2016-07-01  6:34           ` Ondřej Jirman
2016-07-01  7:47           ` Jean-Francois Moine
2016-07-01  7:47             ` Jean-Francois Moine
2016-07-01  7:47             ` Jean-Francois Moine
2016-07-15  8:53       ` Maxime Ripard
2016-07-15  8:53         ` Maxime Ripard
2016-07-15  8:53         ` Maxime Ripard
2016-07-15 10:38         ` Ondřej Jirman
2016-07-15 10:38           ` Ondřej Jirman
2016-07-15 10:38           ` Ondřej Jirman
2016-07-15 13:27           ` Jean-Francois Moine
2016-07-15 13:27             ` Jean-Francois Moine
2016-07-15 13:48             ` Ondřej Jirman
2016-07-15 13:48               ` Ondřej Jirman
2016-07-15 13:48               ` Ondřej Jirman
2016-07-15 14:22               ` [linux-sunxi] " Michal Suchanek
2016-07-15 14:22                 ` Michal Suchanek
2016-07-15 14:22                 ` Michal Suchanek
2016-07-15 16:33                 ` Ondřej Jirman
2016-07-15 16:33                   ` Ondřej Jirman
2016-07-21  9:51             ` Maxime Ripard
2016-07-21  9:51               ` Maxime Ripard
2016-07-21  9:51               ` Maxime Ripard
2016-07-21  9:48           ` Maxime Ripard
2016-07-21  9:48             ` Maxime Ripard
2016-07-21  9:48             ` Maxime Ripard
2016-07-21  9:52             ` Ondřej Jirman
2016-07-21  9:52               ` Ondřej Jirman
2016-07-26  6:32               ` Maxime Ripard
2016-07-26  6:32                 ` Maxime Ripard
2016-07-28 11:27                 ` Changed: sunxi-ng clock code - NKMP clock implementation is wrong Ondřej Jirman
2016-07-28 11:27                   ` Ondřej Jirman
2016-07-28 11:27                   ` Ondřej Jirman
2016-07-28 11:38                   ` [linux-sunxi] " Chen-Yu Tsai
2016-07-28 11:38                     ` Chen-Yu Tsai
2016-07-28 11:38                     ` Chen-Yu Tsai
2016-07-28 21:00                   ` Maxime Ripard
2016-07-28 21:00                     ` Maxime Ripard
2016-07-28 21:00                     ` Maxime Ripard
2016-07-28 22:01                     ` Ondřej Jirman
2016-07-28 22:01                       ` Ondřej Jirman
2016-07-28 22:01                       ` Ondřej Jirman
2016-07-31 10:31                       ` Maxime Ripard
2016-07-31 10:31                         ` Maxime Ripard
2016-07-31 10:31                         ` Maxime Ripard
2016-07-31 22:01                         ` Ondřej Jirman
2016-07-31 22:01                           ` Ondřej Jirman
2016-07-31 22:01                           ` Ondřej Jirman
2016-08-31 20:25                           ` Maxime Ripard
2016-08-31 20:25                             ` Maxime Ripard
2016-08-31 20:25                             ` Maxime Ripard
2016-07-01  0:53     ` [PATCH v2 06/14] ARM: sun8i: clk: Add clk-factor rate application method Ondřej Jirman
2016-07-01  0:53       ` Ondřej Jirman
2016-07-01  0:53       ` Ondřej Jirman
2016-07-15  8:19       ` Maxime Ripard
2016-07-15  8:19         ` Maxime Ripard
2016-07-15  8:19         ` Maxime Ripard
2016-06-25  3:45 ` [PATCH v2 07/14] ARM: dts: sun8i: Use sun8i-h3-pll1-clk for pll1 in H3 megous
2016-06-25  3:45   ` megous at megous.com
2016-06-25  3:45   ` megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-25  3:45 ` [PATCH v2 08/14] ARM: dts: sun8i: Add thermal sensor node to the sun8i-h3.dtsi megous
2016-06-25  3:45   ` megous at megous.com
2016-06-25  3:45   ` megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-25  3:45 ` [PATCH v2 09/14] ARM: dts: sun8i: Add cpu0 label to sun8i-h3.dtsi megous
2016-06-25  3:45   ` megous at megous.com
2016-06-25  3:45   ` megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-25  3:45 ` [PATCH v2 10/14] ARM: dts: sun8i: Add r_twi I2C controller megous
2016-06-25  3:45   ` megous at megous.com
2016-06-25  3:45   ` megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-25  7:16   ` Maxime Ripard
2016-06-25  7:16     ` Maxime Ripard
2016-06-25  7:16     ` Maxime Ripard
2016-06-25  3:45 ` [PATCH v2 11/14] ARM: dts: sun8i: Add sy8106a regulator to Orange Pi PC megous
2016-06-25  3:45   ` megous at megous.com
2016-06-25  3:45   ` megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-25  3:45 ` [PATCH v2 12/14] ARM: dts: sun8i: Setup CPU operating points for Onrage PI PC megous
2016-06-25  3:45   ` megous at megous.com
2016-06-25  3:45   ` megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-25  3:45 ` [PATCH v2 13/14] ARM: dts: sun8i: Add gpio-regulator used on Orange Pi One megous
2016-06-25  3:45   ` megous at megous.com
2016-06-25  3:45   ` megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-25  7:18   ` Maxime Ripard
2016-06-25  7:18     ` Maxime Ripard
2016-06-25  7:18     ` Maxime Ripard
2016-06-25  3:45 ` [PATCH v2 14/14] ARM: dts: sun8i: Enable DVFS " megous
2016-06-25  3:45   ` megous at megous.com
2016-06-25  3:45   ` megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-30 11:13   ` [linux-sunxi] " Michal Suchanek
2016-06-30 11:13     ` Michal Suchanek
2016-06-30 11:13     ` Michal Suchanek
2016-06-30 14:19     ` Ondřej Jirman
2016-06-30 14:19       ` Ondřej Jirman
2016-06-30 14:19       ` Ondřej Jirman
2016-06-30 15:16       ` [linux-sunxi] " Michal Suchanek
2016-06-30 15:16         ` Michal Suchanek
2016-06-30 15:16         ` Michal Suchanek
2016-06-30 15:32         ` [linux-sunxi] " Ondřej Jirman
2016-06-30 15:32           ` Ondřej Jirman
2016-06-30 15:32           ` Ondřej Jirman
2016-06-30 15:50         ` [linux-sunxi] " Michal Suchanek
2016-06-30 15:50           ` Michal Suchanek
2016-06-30 15:50           ` Michal Suchanek
2016-06-30 15:53           ` [linux-sunxi] " Ondřej Jirman
2016-06-30 15:53             ` Ondřej Jirman
2016-06-30 15:53             ` Ondřej Jirman
2016-07-01 10:54           ` [linux-sunxi] " Michal Suchanek
2016-07-01 10:54             ` Michal Suchanek
2016-07-01 10:54             ` Michal Suchanek
2016-06-30 14:23     ` [linux-sunxi] " Siarhei Siamashka
2016-06-30 14:23       ` Siarhei Siamashka
2016-06-30 14:23       ` Siarhei Siamashka
2016-07-01  1:17       ` [linux-sunxi] " Ondřej Jirman
2016-07-01  1:17         ` Ondřej Jirman
2016-07-01  1:17         ` Ondřej Jirman
2016-07-22  0:41     ` [linux-sunxi] " Ondřej Jirman
2016-07-22  0:41       ` Ondřej Jirman
2016-07-22  0:41       ` Ondřej Jirman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=99d5e0d0-f2d6-d1c7-21fd-9b9c6edb76a2@megous.com \
    --to=megous@megous.com \
    --cc=broonie@kernel.org \
    --cc=dev@linux-sunxi.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.