From: Vasily Khoruzhick <anarsoul@gmail.com> To: Torsten Duwe <duwe@lst.de> Cc: David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Thierry Reding <thierry.reding@gmail.com>, Maxime Ripard <maxime.ripard@bootlin.com>, Chen-Yu Tsai <wens@csie.org>, Andrzej Hajda <a.hajda@samsung.com>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com>, Icenowy Zheng <icenowy@aosc.io>, Sean Paul <seanpaul@chromium.org>, Harald Geyer <harald@ccbib.org>, dri-devel <dri-devel@lists.freedesktop.org>, devicetree <devicetree@vger.kernel.org>, arm-linux <linux-arm-kernel@lists.infradead.org>, linux-kernel <linux-kernel@vger.kernel.org> Subject: Re: [PATCH 4/4] arm64: DTS: allwinner: a64: enable ANX6345 bridge on Teres-I Date: Thu, 16 May 2019 11:26:45 -0700 [thread overview] Message-ID: <CA+E=qVdxvU5t9MB447Zd+-MO7rw+qBxxaZApjp4fgDx=W47r-g@mail.gmail.com> (raw) In-Reply-To: <20190516164859.GB10431@lst.de> On Thu, May 16, 2019 at 9:49 AM Torsten Duwe <duwe@lst.de> wrote: > > On Thu, May 16, 2019 at 09:06:41AM -0700, Vasily Khoruzhick wrote: > > > > Driver can talk to the panel over AUX channel only after t1+t3, t1 is > > up to 10ms, t3 is up to 200ms. > > This is after power-on. The boot loader needs to deal with this. Actually panel driver has to deal with it and not bootloader. > > It works with older version of driver > > that keeps panel always on because it takes a while between driver > > probe and pipeline start. > > No lid switch, no USB, no WiFi, no MMC. If you disable DCDC1 you'll > run out of wakeup-sources ;-) IOW: I see no practical way any OS > driver can switch this panel voltage off and survive... Ouch, looks like someone made a huge mistake in HW design? > > All in all - you don't need panel timings since there's EDID but you > > still need panel delays. Anyway, it's up to you and maintainers. > > Let's give it a try. > > Torsten >
WARNING: multiple messages have this Message-ID (diff)
From: Vasily Khoruzhick <anarsoul@gmail.com> To: Torsten Duwe <duwe@lst.de> Cc: Mark Rutland <mark.rutland@arm.com>, devicetree <devicetree@vger.kernel.org>, Andrzej Hajda <a.hajda@samsung.com>, David Airlie <airlied@linux.ie>, linux-kernel <linux-kernel@vger.kernel.org>, dri-devel <dri-devel@lists.freedesktop.org>, Maxime Ripard <maxime.ripard@bootlin.com>, Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>, Thierry Reding <thierry.reding@gmail.com>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com>, Daniel Vetter <daniel@ffwll.ch>, Harald Geyer <harald@ccbib.org>, Sean Paul <seanpaul@chromium.org>, arm-linux <linux-arm-kernel@lists.infradead.org>, Icenowy Zheng <icenowy@aosc.io> Subject: Re: [PATCH 4/4] arm64: DTS: allwinner: a64: enable ANX6345 bridge on Teres-I Date: Thu, 16 May 2019 11:26:45 -0700 [thread overview] Message-ID: <CA+E=qVdxvU5t9MB447Zd+-MO7rw+qBxxaZApjp4fgDx=W47r-g@mail.gmail.com> (raw) In-Reply-To: <20190516164859.GB10431@lst.de> On Thu, May 16, 2019 at 9:49 AM Torsten Duwe <duwe@lst.de> wrote: > > On Thu, May 16, 2019 at 09:06:41AM -0700, Vasily Khoruzhick wrote: > > > > Driver can talk to the panel over AUX channel only after t1+t3, t1 is > > up to 10ms, t3 is up to 200ms. > > This is after power-on. The boot loader needs to deal with this. Actually panel driver has to deal with it and not bootloader. > > It works with older version of driver > > that keeps panel always on because it takes a while between driver > > probe and pipeline start. > > No lid switch, no USB, no WiFi, no MMC. If you disable DCDC1 you'll > run out of wakeup-sources ;-) IOW: I see no practical way any OS > driver can switch this panel voltage off and survive... Ouch, looks like someone made a huge mistake in HW design? > > All in all - you don't need panel timings since there's EDID but you > > still need panel delays. Anyway, it's up to you and maintainers. > > Let's give it a try. > > Torsten > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-05-16 18:26 UTC|newest] Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-05-14 15:59 [PATCH 0/4] Add missing device nodes for Olimex Teres-I Torsten Duwe 2019-05-14 15:59 ` Torsten Duwe 2019-05-14 16:02 ` [PATCH 1/4] arm64: DTS: allwinner: a64: Add pinmux for RGB666 LCD Torsten Duwe 2019-05-14 16:02 ` Torsten Duwe 2019-05-14 16:02 ` Torsten Duwe 2019-05-16 8:54 ` Maxime Ripard 2019-05-16 8:54 ` Maxime Ripard 2019-05-14 16:02 ` [PATCH 2/4] dt-bindings: Add ANX6345 DP/eDP transmitter binding Torsten Duwe 2019-05-14 16:02 ` Torsten Duwe 2019-05-14 16:02 ` [PATCH 3/4] arm64: DTS: allwinner: a64: Enable audio on Teres-I Torsten Duwe 2019-05-14 16:02 ` Torsten Duwe 2019-05-14 16:02 ` [PATCH 4/4] arm64: DTS: allwinner: a64: enable ANX6345 bridge " Torsten Duwe 2019-05-14 16:02 ` Torsten Duwe 2019-05-14 17:48 ` Vasily Khoruzhick 2019-05-14 17:48 ` Vasily Khoruzhick 2019-05-14 17:48 ` Vasily Khoruzhick 2019-05-15 7:31 ` Torsten Duwe 2019-05-15 7:31 ` Torsten Duwe 2019-05-15 15:08 ` Vasily Khoruzhick 2019-05-15 15:08 ` Vasily Khoruzhick 2019-05-16 15:48 ` Torsten Duwe 2019-05-16 15:48 ` Torsten Duwe 2019-05-16 16:06 ` Vasily Khoruzhick 2019-05-16 16:06 ` Vasily Khoruzhick 2019-05-16 16:48 ` Torsten Duwe 2019-05-16 16:48 ` Torsten Duwe 2019-05-16 18:26 ` Vasily Khoruzhick [this message] 2019-05-16 18:26 ` Vasily Khoruzhick 2019-05-17 7:27 ` Maxime Ripard 2019-05-17 7:27 ` Maxime Ripard 2019-05-17 7:27 ` Maxime Ripard 2019-05-17 8:14 ` Torsten Duwe 2019-05-17 8:14 ` Torsten Duwe 2019-05-17 9:08 ` Maxime Ripard 2019-05-17 9:08 ` Maxime Ripard 2019-05-17 9:08 ` Maxime Ripard 2019-05-17 9:47 ` Torsten Duwe 2019-05-17 9:47 ` Torsten Duwe 2019-05-17 15:25 ` Vasily Khoruzhick 2019-05-17 15:25 ` Vasily Khoruzhick 2019-05-17 15:25 ` Vasily Khoruzhick
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to='CA+E=qVdxvU5t9MB447Zd+-MO7rw+qBxxaZApjp4fgDx=W47r-g@mail.gmail.com' \ --to=anarsoul@gmail.com \ --cc=Laurent.pinchart@ideasonboard.com \ --cc=a.hajda@samsung.com \ --cc=airlied@linux.ie \ --cc=daniel@ffwll.ch \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=duwe@lst.de \ --cc=harald@ccbib.org \ --cc=icenowy@aosc.io \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=maxime.ripard@bootlin.com \ --cc=robh+dt@kernel.org \ --cc=seanpaul@chromium.org \ --cc=thierry.reding@gmail.com \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.