From: Naresh Kamboju <naresh.kamboju@linaro.org>
To: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Cc: "David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Jose Abreu <joabreu@synopsys.com>,
Leon Romanovsky <leon@kernel.org>,
Arnd Bergmann <arnd@kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>, Netdev <netdev@vger.kernel.org>,
punit1.agrawal@toshiba.co.jp, yuji2.ishikawa@toshiba.co.jp,
Linux ARM <linux-arm-kernel@lists.infradead.org>,
open list <linux-kernel@vger.kernel.org>,
lkft-triage@lists.linaro.org
Subject: Re: [PATCH v4 4/4] arm: dts: visconti: Add DT support for Toshiba Visconti5 ethernet controller
Date: Tue, 16 Feb 2021 18:04:29 +0530 [thread overview]
Message-ID: <CA+G9fYtDdZy=aNnB=8eQA2_h8bOtyFuizfbJzcj3OGcqJuM-Gg@mail.gmail.com> (raw)
In-Reply-To: <20210215152438.4318-5-nobuhiro1.iwamatsu@toshiba.co.jp>
Hi Nobuhiro,
On Mon, 15 Feb 2021 at 21:00, Nobuhiro Iwamatsu
<nobuhiro1.iwamatsu@toshiba.co.jp> wrote:
>
> Add the ethernet controller node in Toshiba Visconti5 SoC-specific DT file.
> And enable this node in TMPV7708 RM main board's board-specific DT file.
>
> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> ---
> .../boot/dts/toshiba/tmpv7708-rm-mbrc.dts | 18 +++++++++++++
> arch/arm64/boot/dts/toshiba/tmpv7708.dtsi | 25 +++++++++++++++++++
> 2 files changed, 43 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
> index ed0bf7f13f54..48fa8776e36f 100644
> --- a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
> +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
> @@ -41,3 +41,21 @@ &uart1 {
> clocks = <&uart_clk>;
> clock-names = "apb_pclk";
> };
> +
> +&piether {
> + status = "okay";
> + phy-handle = <&phy0>;
> + phy-mode = "rgmii-id";
> + clocks = <&clk300mhz>, <&clk125mhz>;
> + clock-names = "stmmaceth", "phy_ref_clk";
> +
> + mdio0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> + phy0: ethernet-phy@1 {
> + device_type = "ethernet-phy";
> + reg = <0x1>;
This build error was noticed on LKFT builder while building arm64 dtb
on linux next 20210216 tag.
arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts:52.3-4 syntax error
FATAL ERROR: Unable to parse input tree
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/jobs/1033072509#L382
--
Linaro LKFT
https://lkft.linaro.org
WARNING: multiple messages have this Message-ID (diff)
From: Naresh Kamboju <naresh.kamboju@linaro.org>
To: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Cc: Jose Abreu <joabreu@synopsys.com>,
punit1.agrawal@toshiba.co.jp,
Alexandre Torgue <alexandre.torgue@st.com>,
Leon Romanovsky <leon@kernel.org>,
Arnd Bergmann <arnd@kernel.org>, Netdev <netdev@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>,
lkft-triage@lists.linaro.org,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>, Rob Herring <robh+dt@kernel.org>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Jakub Kicinski <kuba@kernel.org>,
yuji2.ishikawa@toshiba.co.jp,
"David S . Miller" <davem@davemloft.net>,
Linux ARM <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v4 4/4] arm: dts: visconti: Add DT support for Toshiba Visconti5 ethernet controller
Date: Tue, 16 Feb 2021 18:04:29 +0530 [thread overview]
Message-ID: <CA+G9fYtDdZy=aNnB=8eQA2_h8bOtyFuizfbJzcj3OGcqJuM-Gg@mail.gmail.com> (raw)
In-Reply-To: <20210215152438.4318-5-nobuhiro1.iwamatsu@toshiba.co.jp>
Hi Nobuhiro,
On Mon, 15 Feb 2021 at 21:00, Nobuhiro Iwamatsu
<nobuhiro1.iwamatsu@toshiba.co.jp> wrote:
>
> Add the ethernet controller node in Toshiba Visconti5 SoC-specific DT file.
> And enable this node in TMPV7708 RM main board's board-specific DT file.
>
> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> ---
> .../boot/dts/toshiba/tmpv7708-rm-mbrc.dts | 18 +++++++++++++
> arch/arm64/boot/dts/toshiba/tmpv7708.dtsi | 25 +++++++++++++++++++
> 2 files changed, 43 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
> index ed0bf7f13f54..48fa8776e36f 100644
> --- a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
> +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
> @@ -41,3 +41,21 @@ &uart1 {
> clocks = <&uart_clk>;
> clock-names = "apb_pclk";
> };
> +
> +&piether {
> + status = "okay";
> + phy-handle = <&phy0>;
> + phy-mode = "rgmii-id";
> + clocks = <&clk300mhz>, <&clk125mhz>;
> + clock-names = "stmmaceth", "phy_ref_clk";
> +
> + mdio0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> + phy0: ethernet-phy@1 {
> + device_type = "ethernet-phy";
> + reg = <0x1>;
This build error was noticed on LKFT builder while building arm64 dtb
on linux next 20210216 tag.
arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts:52.3-4 syntax error
FATAL ERROR: Unable to parse input tree
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/jobs/1033072509#L382
--
Linaro LKFT
https://lkft.linaro.org
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-02-16 12:35 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-15 15:24 [PATCH v4 0/4] net: stmmac: Add Toshiba Visconti SoCs glue driver Nobuhiro Iwamatsu
2021-02-15 15:24 ` Nobuhiro Iwamatsu
2021-02-15 15:24 ` [PATCH v4 1/4] dt-bindings: net: Add DT bindings for Toshiba Visconti TMPV7700 SoC Nobuhiro Iwamatsu
2021-02-15 15:24 ` Nobuhiro Iwamatsu
2021-02-15 15:24 ` [PATCH v4 2/4] net: stmmac: Add Toshiba Visconti SoCs glue driver Nobuhiro Iwamatsu
2021-02-15 15:24 ` Nobuhiro Iwamatsu
2021-02-15 15:24 ` [PATCH v4 3/4] MAINTAINERS: Add entries for Toshiba Visconti ethernet controller Nobuhiro Iwamatsu
2021-02-15 15:24 ` Nobuhiro Iwamatsu
2021-02-15 15:24 ` [PATCH v4 4/4] arm: dts: visconti: Add DT support for Toshiba Visconti5 " Nobuhiro Iwamatsu
2021-02-15 15:24 ` Nobuhiro Iwamatsu
2021-02-16 12:34 ` Naresh Kamboju [this message]
2021-02-16 12:34 ` Naresh Kamboju
2021-02-15 23:10 ` [PATCH v4 0/4] net: stmmac: Add Toshiba Visconti SoCs glue driver patchwork-bot+netdevbpf
2021-02-15 23:10 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CA+G9fYtDdZy=aNnB=8eQA2_h8bOtyFuizfbJzcj3OGcqJuM-Gg@mail.gmail.com' \
--to=naresh.kamboju@linaro.org \
--cc=alexandre.torgue@st.com \
--cc=arnd@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=joabreu@synopsys.com \
--cc=kuba@kernel.org \
--cc=leon@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lkft-triage@lists.linaro.org \
--cc=netdev@vger.kernel.org \
--cc=nobuhiro1.iwamatsu@toshiba.co.jp \
--cc=peppe.cavallaro@st.com \
--cc=punit1.agrawal@toshiba.co.jp \
--cc=robh+dt@kernel.org \
--cc=yuji2.ishikawa@toshiba.co.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.