[U-Boot] arm, da850: Question about start point

[U-Boot] arm, da850: Question about start point

[Gabriele Filosofi]

Hi all,

I'm new to this mailing-list and to u-boot.
I've to port the TI SDK_5.02 to a LogicPD_SOM_AM1808 -based application board.
The SDK_5.02 is based on PSP_03.21.00.04, whose u-boot was developed on git u-boot 2010.12

The question is

What's the better, to start from SDK's u-boot or from git u-boot 2010.12  ?

Thanks a lot,
Gabriele

[U-Boot] arm, da850: Question about start point

[Christian Riesch]

Hi Gabriele,

On Friday, December 16, 2011, Gabriele Filosofi <GabrieleF@cosmed.it> wrote:
> Hi all,
>
> I'm new to this mailing-list and to u-boot.
> I've to port the TI SDK_5.02 to a LogicPD_SOM_AM1808 -based application
board.
> The SDK_5.02 is based on PSP_03.21.00.04, whose u-boot was developed on
git u-boot 2010.12
>
> The question is
>
> What's the better, to start from SDK's u-boot or from git u-boot 2010.12
 ?
>

I recommend to use the most recent u-boot from git, it works fine on the
am1808 som (as long as you use the da850evm_config and not
da850_am18xx_config, the latter is broken). I started with u-boot from the
SDK but switched later to git because I needed features that are only in
newer u-boots.
Christian

> Thanks a lot,
> Gabriele
>