* [PATCH 0/2] A couple yocto-bsp fixes
@ 2012-04-18 21:26 tom.zanussi
2012-04-18 21:26 ` [PATCH 1/2] yocto-kernel: use BUILDDIR to find bblayers.conf tom.zanussi
2012-04-18 21:26 ` [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel tom.zanussi
0 siblings, 2 replies; 15+ messages in thread
From: tom.zanussi @ 2012-04-18 21:26 UTC (permalink / raw)
To: yocto
From: Tom Zanussi <tom.zanussi@intel.com>
Fixes for a couple yocto-bsp bugs.
The following changes since commit 1a03b7dfba464fde770ba69b618427d13e0a3b8b:
Scott Rifenbark (1):
documentation/bsp-guide/bsp.xml: spelling corrected.
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib.git tzanussi/yocto-bsp-fixes-2219-2330
http://git.yoctoproject.org/cgit.cgi//log/?h=tzanussi/yocto-bsp-fixes-2219-2330
Tom Zanussi (2):
yocto-kernel: use BUILDDIR to find bblayers.conf
yocto-bsp: clarify help with reference to meta-intel
scripts/lib/bsp/help.py | 40 ++++++++++++++++++++++++++++++++++++++++
scripts/lib/bsp/kernel.py | 7 ++++++-
2 files changed, 46 insertions(+), 1 deletions(-)
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 1/2] yocto-kernel: use BUILDDIR to find bblayers.conf
2012-04-18 21:26 [PATCH 0/2] A couple yocto-bsp fixes tom.zanussi
@ 2012-04-18 21:26 ` tom.zanussi
2012-04-27 23:56 ` Darren Hart
2012-04-18 21:26 ` [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel tom.zanussi
1 sibling, 1 reply; 15+ messages in thread
From: tom.zanussi @ 2012-04-18 21:26 UTC (permalink / raw)
To: yocto
From: Tom Zanussi <tom.zanussi@intel.com>
The current code assumes that builddir == srcdir/build, which it
obviously isn't sometimes. Use BUILDDIR to get the actual builddir
being used.
Fixes [YOCTO #2219].
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
---
scripts/lib/bsp/kernel.py | 7 ++++++-
1 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/scripts/lib/bsp/kernel.py b/scripts/lib/bsp/kernel.py
index 360851b..8b3aa72 100644
--- a/scripts/lib/bsp/kernel.py
+++ b/scripts/lib/bsp/kernel.py
@@ -37,7 +37,12 @@ def find_bblayers(scripts_path):
"""
Find and return a sanitized list of the layers found in BBLAYERS.
"""
- bblayers_conf = os.path.join(scripts_path, "../build/conf/bblayers.conf")
+ try:
+ builddir = os.environ["BUILDDIR"]
+ except KeyError:
+ print "BUILDDIR not found, exiting. (Did you forget to source oe-init-build-env?)"
+ sys.exit(1)
+ bblayers_conf = os.path.join(builddir, "conf/bblayers.conf")
layers = []
--
1.7.0.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 1/2] yocto-kernel: use BUILDDIR to find bblayers.conf
2012-04-18 21:26 ` [PATCH 1/2] yocto-kernel: use BUILDDIR to find bblayers.conf tom.zanussi
@ 2012-04-27 23:56 ` Darren Hart
0 siblings, 0 replies; 15+ messages in thread
From: Darren Hart @ 2012-04-27 23:56 UTC (permalink / raw)
To: tom.zanussi; +Cc: yocto
On 04/27/2012 12:00 PM, tom.zanussi@intel.com wrote:
> From: Tom Zanussi <tom.zanussi@intel.com>
>
> The current code assumes that builddir == srcdir/build, which it
> obviously isn't sometimes. Use BUILDDIR to get the actual builddir
> being used.
>
> Fixes [YOCTO #2219].
>
> Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
> ---
> scripts/lib/bsp/kernel.py | 7 ++++++-
> 1 files changed, 6 insertions(+), 1 deletions(-)
>
> diff --git a/scripts/lib/bsp/kernel.py b/scripts/lib/bsp/kernel.py
> index 360851b..8b3aa72 100644
> --- a/scripts/lib/bsp/kernel.py
> +++ b/scripts/lib/bsp/kernel.py
> @@ -37,7 +37,12 @@ def find_bblayers(scripts_path):
> """
> Find and return a sanitized list of the layers found in BBLAYERS.
> """
> - bblayers_conf = os.path.join(scripts_path, "../build/conf/bblayers.conf")
> + try:
> + builddir = os.environ["BUILDDIR"]
> + except KeyError:
> + print "BUILDDIR not found, exiting. (Did you forget to source oe-init-build-env?)"
We should probably update the bsp tools to use the logging module, I'll
open a feature request for that.
https://bugzilla.yoctoproject.org/show_bug.cgi?id=2375
This should make it easier to instrument the code with verbosity levels
as well as make these go to the right file descriptor. I believe this is
consistent with the rest of the source though, so this looks fine as is.
> + sys.exit(1)
> + bblayers_conf = os.path.join(builddir, "conf/bblayers.conf")
>
> layers = []
>
Acked-by: Darren Hart <dvhart@linux.intel.com>
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel
2012-04-18 21:26 [PATCH 0/2] A couple yocto-bsp fixes tom.zanussi
2012-04-18 21:26 ` [PATCH 1/2] yocto-kernel: use BUILDDIR to find bblayers.conf tom.zanussi
@ 2012-04-18 21:26 ` tom.zanussi
2012-04-28 0:01 ` Darren Hart
1 sibling, 1 reply; 15+ messages in thread
From: tom.zanussi @ 2012-04-18 21:26 UTC (permalink / raw)
To: yocto
From: Tom Zanussi <tom.zanussi@intel.com>
The current yocto-bsp help assumes knowledge that the meta-intel layer
needs to be cloned before it's put into the BBLAYERS. Avoid the
guesswork and state the details explicitly in the help.
Also, the shorter 'usage' string doesn't mention it at all; it would
help to at minimum mention it and refer the user to the detailed help.
Fixes [YOCTO #2330].
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
---
scripts/lib/bsp/help.py | 40 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 40 insertions(+), 0 deletions(-)
diff --git a/scripts/lib/bsp/help.py b/scripts/lib/bsp/help.py
index f78b09b..f849833 100644
--- a/scripts/lib/bsp/help.py
+++ b/scripts/lib/bsp/help.py
@@ -115,6 +115,18 @@ yocto_bsp_create_usage = """
'properties' that will be used to fill out the BSP-specific portions
of the BSP. The possible values for the 'karch' paramter can be
listed via 'yocto-bsp list karch'.
+
+ NOTE: Once created, you should add your new layer to your
+ bblayers.conf file in order for it to be subsquently seen and
+ modified by the yocto-kernel tool.
+
+ See 'yocto bsp help create' for more detailed instructions.
+
+ NOTE for x86- and x86_64-based BSPs: The generated BSP assumes the
+ presence of the of the meta-intel layer, so you should also have a
+ meta-intel layer present and added to your bblayers.conf as well.
+
+ See 'yocto bsp help create' for more detailed instructions.
"""
yocto_bsp_create_help = """
@@ -159,9 +171,37 @@ DESCRIPTION
bblayers.conf file in order for it to be subsquently seen and
modified by the yocto-kernel tool.
+ For example, assuming your poky repo is at /path/to/poky, your
+ your new BSP layer is at /path/to/poky/meta-mybsp, and your build
+ directory is /path/to/build:
+
+ $ gedit /path/to/build/conf/bblayers.conf
+
+ BBLAYERS ?= " \\
+ /path/to/poky/meta \\
+ /path/to/poky/meta-yocto \\
+ /path/to/poky/meta-mybsp \\
+ "
+
NOTE for x86- and x86_64-based BSPs: The generated BSP assumes the
presence of the of the meta-intel layer, so you should also have a
meta-intel layer present and added to your bblayers.conf as well.
+
+ For example, assuming your poky repo is at /path/to/poky, your
+ your new BSP layer is at /path/to/poky/meta-mybsp, and your build
+ directory is /path/to/build:
+
+ $ cd /path/to/poky
+ $ git clone git://git.yoctoproject.org/meta-intel.git
+
+ $ gedit /path/to/build/conf/bblayers.conf
+
+ BBLAYERS ?= " \\
+ /path/to/poky/meta \\
+ /path/to/poky/meta-yocto \\
+ /path/to/poky/meta-intel \\
+ /path/to/poky/meta-mybsp \\
+ "
"""
yocto_bsp_list_usage = """
--
1.7.0.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel
2012-04-18 21:26 ` [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel tom.zanussi
@ 2012-04-28 0:01 ` Darren Hart
2012-04-28 0:26 ` Tom Zanussi
2012-04-30 17:31 ` William Mills
0 siblings, 2 replies; 15+ messages in thread
From: Darren Hart @ 2012-04-28 0:01 UTC (permalink / raw)
To: tom.zanussi; +Cc: yocto
On 04/27/2012 12:00 PM, tom.zanussi@intel.com wrote:
> From: Tom Zanussi <tom.zanussi@intel.com>
>
> The current yocto-bsp help assumes knowledge that the meta-intel layer
> needs to be cloned before it's put into the BBLAYERS. Avoid the
> guesswork and state the details explicitly in the help.
>
> Also, the shorter 'usage' string doesn't mention it at all; it would
> help to at minimum mention it and refer the user to the detailed help.
>
> Fixes [YOCTO #2330].
>
> Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Some minor nits below:
> ---
> scripts/lib/bsp/help.py | 40 ++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 40 insertions(+), 0 deletions(-)
>
> diff --git a/scripts/lib/bsp/help.py b/scripts/lib/bsp/help.py
> index f78b09b..f849833 100644
> --- a/scripts/lib/bsp/help.py
> +++ b/scripts/lib/bsp/help.py
> @@ -115,6 +115,18 @@ yocto_bsp_create_usage = """
> 'properties' that will be used to fill out the BSP-specific portions
> of the BSP. The possible values for the 'karch' paramter can be
> listed via 'yocto-bsp list karch'.
> +
> + NOTE: Once created, you should add your new layer to your
> + bblayers.conf file in order for it to be subsquently seen and
> + modified by the yocto-kernel tool.
> +
> + See 'yocto bsp help create' for more detailed instructions.
> +
> + NOTE for x86- and x86_64-based BSPs: The generated BSP assumes the
> + presence of the of the meta-intel layer, so you should also have a
> + meta-intel layer present and added to your bblayers.conf as well.
Consider:
+ NOTE: For x86- and x86_64-based BSPs, the generated BSP assumes the
+ presence of the of the meta-intel layer. Ensure the meta-intel layer
+ is present and added to bblayers.conf.
> +
> + See 'yocto bsp help create' for more detailed instructions.
> """
>
> yocto_bsp_create_help = """
> @@ -159,9 +171,37 @@ DESCRIPTION
> bblayers.conf file in order for it to be subsquently seen and
> modified by the yocto-kernel tool.
>
> + For example, assuming your poky repo is at /path/to/poky, your
> + your new BSP layer is at /path/to/poky/meta-mybsp, and your build
The word "your" appears twice in a row.
> + directory is /path/to/build:
> +
> + $ gedit /path/to/build/conf/bblayers.conf
> +
> + BBLAYERS ?= " \\
> + /path/to/poky/meta \\
> + /path/to/poky/meta-yocto \\
> + /path/to/poky/meta-mybsp \\
> + "
> +
> NOTE for x86- and x86_64-based BSPs: The generated BSP assumes the
> presence of the of the meta-intel layer, so you should also have a
> meta-intel layer present and added to your bblayers.conf as well.
OK, this is just context, but same comment as above.
> +
> + For example, assuming your poky repo is at /path/to/poky, your
> + your new BSP layer is at /path/to/poky/meta-mybsp, and your build
Same double "your" here as well.
> + directory is /path/to/build:
> +
> + $ cd /path/to/poky
> + $ git clone git://git.yoctoproject.org/meta-intel.git
> +
> + $ gedit /path/to/build/conf/bblayers.conf
> +
> + BBLAYERS ?= " \\
> + /path/to/poky/meta \\
> + /path/to/poky/meta-yocto \\
> + /path/to/poky/meta-intel \\
> + /path/to/poky/meta-mybsp \\
> + "
> """
>
> yocto_bsp_list_usage = """
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel
2012-04-28 0:01 ` Darren Hart
@ 2012-04-28 0:26 ` Tom Zanussi
2012-04-30 17:31 ` William Mills
1 sibling, 0 replies; 15+ messages in thread
From: Tom Zanussi @ 2012-04-28 0:26 UTC (permalink / raw)
To: Darren Hart; +Cc: yocto
On Fri, 2012-04-27 at 17:01 -0700, Darren Hart wrote:
>
> On 04/27/2012 12:00 PM, tom.zanussi@intel.com wrote:
> > From: Tom Zanussi <tom.zanussi@intel.com>
> >
> > The current yocto-bsp help assumes knowledge that the meta-intel layer
> > needs to be cloned before it's put into the BBLAYERS. Avoid the
> > guesswork and state the details explicitly in the help.
> >
> > Also, the shorter 'usage' string doesn't mention it at all; it would
> > help to at minimum mention it and refer the user to the detailed help.
> >
> > Fixes [YOCTO #2330].
> >
> > Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
>
> Some minor nits below:
Thanks for catching those, patches resubmitted...
Tom
>
> > ---
> > scripts/lib/bsp/help.py | 40 ++++++++++++++++++++++++++++++++++++++++
> > 1 files changed, 40 insertions(+), 0 deletions(-)
> >
> > diff --git a/scripts/lib/bsp/help.py b/scripts/lib/bsp/help.py
> > index f78b09b..f849833 100644
> > --- a/scripts/lib/bsp/help.py
> > +++ b/scripts/lib/bsp/help.py
> > @@ -115,6 +115,18 @@ yocto_bsp_create_usage = """
> > 'properties' that will be used to fill out the BSP-specific portions
> > of the BSP. The possible values for the 'karch' paramter can be
> > listed via 'yocto-bsp list karch'.
> > +
> > + NOTE: Once created, you should add your new layer to your
> > + bblayers.conf file in order for it to be subsquently seen and
> > + modified by the yocto-kernel tool.
> > +
> > + See 'yocto bsp help create' for more detailed instructions.
> > +
> > + NOTE for x86- and x86_64-based BSPs: The generated BSP assumes the
> > + presence of the of the meta-intel layer, so you should also have a
> > + meta-intel layer present and added to your bblayers.conf as well.
>
> Consider:
>
> + NOTE: For x86- and x86_64-based BSPs, the generated BSP assumes the
> + presence of the of the meta-intel layer. Ensure the meta-intel layer
> + is present and added to bblayers.conf.
>
>
> > +
> > + See 'yocto bsp help create' for more detailed instructions.
> > """
> >
> > yocto_bsp_create_help = """
> > @@ -159,9 +171,37 @@ DESCRIPTION
> > bblayers.conf file in order for it to be subsquently seen and
> > modified by the yocto-kernel tool.
> >
> > + For example, assuming your poky repo is at /path/to/poky, your
> > + your new BSP layer is at /path/to/poky/meta-mybsp, and your build
>
>
> The word "your" appears twice in a row.
>
>
> > + directory is /path/to/build:
> > +
> > + $ gedit /path/to/build/conf/bblayers.conf
> > +
> > + BBLAYERS ?= " \\
> > + /path/to/poky/meta \\
> > + /path/to/poky/meta-yocto \\
> > + /path/to/poky/meta-mybsp \\
> > + "
> > +
> > NOTE for x86- and x86_64-based BSPs: The generated BSP assumes the
> > presence of the of the meta-intel layer, so you should also have a
> > meta-intel layer present and added to your bblayers.conf as well.
>
> OK, this is just context, but same comment as above.
>
> > +
> > + For example, assuming your poky repo is at /path/to/poky, your
> > + your new BSP layer is at /path/to/poky/meta-mybsp, and your build
>
> Same double "your" here as well.
>
> > + directory is /path/to/build:
> > +
> > + $ cd /path/to/poky
> > + $ git clone git://git.yoctoproject.org/meta-intel.git
> > +
> > + $ gedit /path/to/build/conf/bblayers.conf
> > +
> > + BBLAYERS ?= " \\
> > + /path/to/poky/meta \\
> > + /path/to/poky/meta-yocto \\
> > + /path/to/poky/meta-intel \\
> > + /path/to/poky/meta-mybsp \\
> > + "
> > """
> >
> > yocto_bsp_list_usage = """
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel
2012-04-28 0:01 ` Darren Hart
2012-04-28 0:26 ` Tom Zanussi
@ 2012-04-30 17:31 ` William Mills
2012-04-30 17:36 ` Darren Hart
2012-04-30 19:13 ` Tom Zanussi
1 sibling, 2 replies; 15+ messages in thread
From: William Mills @ 2012-04-30 17:31 UTC (permalink / raw)
To: Darren Hart; +Cc: yocto
nit of nit
On 04/27/2012 08:01 PM, Darren Hart wrote:
> On 04/27/2012 12:00 PM, tom.zanussi@intel.com wrote:
>> From: Tom Zanussi<tom.zanussi@intel.com>
>>
>> + NOTE for x86- and x86_64-based BSPs: The generated BSP assumes the
>> + presence of the of the meta-intel layer, so you should also have a
>> + meta-intel layer present and added to your bblayers.conf as well.
> Consider:
>
> + NOTE: For x86- and x86_64-based BSPs, the generated BSP assumes the
> + presence of the of the meta-intel layer. Ensure the meta-intel layer
> + is present and added to bblayers.conf.
>
Unless I am really mis-reading this I think "presence of the of the"
should just be "presence of the"
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel
2012-04-30 17:31 ` William Mills
@ 2012-04-30 17:36 ` Darren Hart
2012-04-30 18:33 ` Autif Khan
2012-04-30 19:13 ` Tom Zanussi
1 sibling, 1 reply; 15+ messages in thread
From: Darren Hart @ 2012-04-30 17:36 UTC (permalink / raw)
To: William Mills; +Cc: yocto
On 04/30/2012 10:31 AM, William Mills wrote:
> nit of nit
>
> On 04/27/2012 08:01 PM, Darren Hart wrote:
>> On 04/27/2012 12:00 PM, tom.zanussi@intel.com wrote:
>>> From: Tom Zanussi<tom.zanussi@intel.com>
>>>
>>> + NOTE for x86- and x86_64-based BSPs: The generated BSP assumes the
>>> + presence of the of the meta-intel layer, so you should also have a
>>> + meta-intel layer present and added to your bblayers.conf as well.
>> Consider:
>>
>> + NOTE: For x86- and x86_64-based BSPs, the generated BSP assumes the
>> + presence of the of the meta-intel layer. Ensure the meta-intel layer
>> + is present and added to bblayers.conf.
>>
>
> Unless I am really mis-reading this I think "presence of the of the"
> should just be "presence of the"
Oh wow. :-)
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel
2012-04-30 17:31 ` William Mills
2012-04-30 17:36 ` Darren Hart
@ 2012-04-30 19:13 ` Tom Zanussi
1 sibling, 0 replies; 15+ messages in thread
From: Tom Zanussi @ 2012-04-30 19:13 UTC (permalink / raw)
To: William Mills; +Cc: yocto, Darren Hart
On Mon, 2012-04-30 at 13:31 -0400, William Mills wrote:
> nit of nit
>
> On 04/27/2012 08:01 PM, Darren Hart wrote:
> > On 04/27/2012 12:00 PM, tom.zanussi@intel.com wrote:
> >> From: Tom Zanussi<tom.zanussi@intel.com>
> >>
> >> + NOTE for x86- and x86_64-based BSPs: The generated BSP assumes the
> >> + presence of the of the meta-intel layer, so you should also have a
> >> + meta-intel layer present and added to your bblayers.conf as well.
> > Consider:
> >
> > + NOTE: For x86- and x86_64-based BSPs, the generated BSP assumes the
> > + presence of the of the meta-intel layer. Ensure the meta-intel layer
> > + is present and added to bblayers.conf.
> >
>
> Unless I am really mis-reading this I think "presence of the of the"
> should just be "presence of the"
Doh, you're correct, good catch. Third version of the most perused help
text in history submitted...
Thanks,
Tom
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 1/2] yocto-kernel: use BUILDDIR to find bblayers.conf
2012-04-28 0:25 ` [PATCH 0/2] A couple yocto-bsp fixes, v2 tom.zanussi
@ 2012-04-28 0:25 tom.zanussi
2012-04-28 0:25 ` [PATCH 0/2] A couple yocto-bsp fixes, v2 tom.zanussi
0 siblings, 1 reply; 15+ messages in thread
From: tom.zanussi @ 2012-04-28 0:25 UTC (permalink / raw)
To: yocto, dvhart
From: Tom Zanussi <tom.zanussi@intel.com>
The current code assumes that builddir == srcdir/build, which it
obviously isn't sometimes. Use BUILDDIR to get the actual builddir
being used.
Fixes [YOCTO #2219].
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
---
scripts/lib/bsp/kernel.py | 7 ++++++-
1 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/scripts/lib/bsp/kernel.py b/scripts/lib/bsp/kernel.py
index 360851b..8b3aa72 100644
--- a/scripts/lib/bsp/kernel.py
+++ b/scripts/lib/bsp/kernel.py
@@ -37,7 +37,12 @@ def find_bblayers(scripts_path):
"""
Find and return a sanitized list of the layers found in BBLAYERS.
"""
- bblayers_conf = os.path.join(scripts_path, "../build/conf/bblayers.conf")
+ try:
+ builddir = os.environ["BUILDDIR"]
+ except KeyError:
+ print "BUILDDIR not found, exiting. (Did you forget to source oe-init-build-env?)"
+ sys.exit(1)
+ bblayers_conf = os.path.join(builddir, "conf/bblayers.conf")
layers = []
--
1.7.0.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 0/2] A couple yocto-bsp fixes, v2
@ 2012-04-28 0:25 ` tom.zanussi
2012-04-28 0:25 ` [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel tom.zanussi
0 siblings, 1 reply; 15+ messages in thread
From: tom.zanussi @ 2012-04-28 0:25 UTC (permalink / raw)
To: yocto, dvhart
From: Tom Zanussi <tom.zanussi@intel.com>
Fixes for a couple yocto-bsp bugs.
v2: fixed up the yocto-bsp help text as suggested by Darren Hart.
The following changes since commit c47a869308cb0cccde0b1aee9a001352c99a8395:
Richard Purdie (1):
netbase: Correctly set FILESEXTRAPATHS to include the version
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib.git tzanussi/yocto-bsp-fixes-2219-2330
http://git.yoctoproject.org/cgit/cgit.cgi/poky-contrib/log/?h=tzanussi/yocto-bsp-fixes-2219-2330
Tom Zanussi (2):
yocto-kernel: use BUILDDIR to find bblayers.conf
yocto-bsp: clarify help with reference to meta-intel
scripts/lib/bsp/help.py | 46 ++++++++++++++++++++++++++++++++++++++++++--
scripts/lib/bsp/kernel.py | 7 +++++-
2 files changed, 49 insertions(+), 4 deletions(-)
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel
2012-04-28 0:25 ` [PATCH 0/2] A couple yocto-bsp fixes, v2 tom.zanussi
@ 2012-04-28 0:25 ` tom.zanussi
2012-04-28 5:44 ` Darren Hart
0 siblings, 1 reply; 15+ messages in thread
From: tom.zanussi @ 2012-04-28 0:25 UTC (permalink / raw)
To: yocto, dvhart
From: Tom Zanussi <tom.zanussi@intel.com>
The current yocto-bsp help assumes knowledge that the meta-intel layer
needs to be cloned before it's put into the BBLAYERS. Avoid the
guesswork and state the details explicitly in the help.
Also, the shorter 'usage' string doesn't mention it at all; it would
help to at minimum mention it and refer the user to the detailed help.
Fixes [YOCTO #2330].
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
---
scripts/lib/bsp/help.py | 46 +++++++++++++++++++++++++++++++++++++++++++---
1 files changed, 43 insertions(+), 3 deletions(-)
diff --git a/scripts/lib/bsp/help.py b/scripts/lib/bsp/help.py
index f78b09b..2355657 100644
--- a/scripts/lib/bsp/help.py
+++ b/scripts/lib/bsp/help.py
@@ -115,6 +115,18 @@ yocto_bsp_create_usage = """
'properties' that will be used to fill out the BSP-specific portions
of the BSP. The possible values for the 'karch' paramter can be
listed via 'yocto-bsp list karch'.
+
+ NOTE: Once created, you should add your new layer to your
+ bblayers.conf file in order for it to be subsquently seen and
+ modified by the yocto-kernel tool.
+
+ See 'yocto bsp help create' for more detailed instructions.
+
+ NOTE: For x86- and x86_64-based BSPs, the generated BSP assumes the
+ presence of the of the meta-intel layer. Ensure the meta-intel layer
+ is present and added to bblayers.conf.
+
+ See 'yocto bsp help create' for more detailed instructions.
"""
yocto_bsp_create_help = """
@@ -159,9 +171,37 @@ DESCRIPTION
bblayers.conf file in order for it to be subsquently seen and
modified by the yocto-kernel tool.
- NOTE for x86- and x86_64-based BSPs: The generated BSP assumes the
- presence of the of the meta-intel layer, so you should also have a
- meta-intel layer present and added to your bblayers.conf as well.
+ For example, assuming your poky repo is at /path/to/poky, your new
+ BSP layer is at /path/to/poky/meta-mybsp, and your build directory
+ is /path/to/build:
+
+ $ gedit /path/to/build/conf/bblayers.conf
+
+ BBLAYERS ?= " \\
+ /path/to/poky/meta \\
+ /path/to/poky/meta-yocto \\
+ /path/to/poky/meta-mybsp \\
+ "
+
+ NOTE: For x86- and x86_64-based BSPs, the generated BSP assumes
+ the presence of the of the meta-intel layer. Ensure the meta-intel
+ layer is present and added to bblayers.conf.
+
+ For example, assuming your poky repo is at /path/to/poky, your new
+ BSP layer is at /path/to/poky/meta-mybsp, and your build directory
+ is /path/to/build:
+
+ $ cd /path/to/poky
+ $ git clone git://git.yoctoproject.org/meta-intel.git
+
+ $ gedit /path/to/build/conf/bblayers.conf
+
+ BBLAYERS ?= " \\
+ /path/to/poky/meta \\
+ /path/to/poky/meta-yocto \\
+ /path/to/poky/meta-intel \\
+ /path/to/poky/meta-mybsp \\
+ "
"""
yocto_bsp_list_usage = """
--
1.7.0.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel
2012-04-28 0:25 ` [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel tom.zanussi
@ 2012-04-28 5:44 ` Darren Hart
2012-04-28 5:51 ` Tom Zanussi
0 siblings, 1 reply; 15+ messages in thread
From: Darren Hart @ 2012-04-28 5:44 UTC (permalink / raw)
To: tom.zanussi; +Cc: yocto
On 04/27/2012 05:25 PM, tom.zanussi@intel.com wrote:
> From: Tom Zanussi <tom.zanussi@intel.com>
>
> The current yocto-bsp help assumes knowledge that the meta-intel layer
> needs to be cloned before it's put into the BBLAYERS. Avoid the
> guesswork and state the details explicitly in the help.
>
> Also, the shorter 'usage' string doesn't mention it at all; it would
> help to at minimum mention it and refer the user to the detailed help.
>
> Fixes [YOCTO #2330].
>
> Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
> ---
> scripts/lib/bsp/help.py | 46 +++++++++++++++++++++++++++++++++++++++++++---
> 1 files changed, 43 insertions(+), 3 deletions(-)
>
> diff --git a/scripts/lib/bsp/help.py b/scripts/lib/bsp/help.py
> index f78b09b..2355657 100644
> --- a/scripts/lib/bsp/help.py
> +++ b/scripts/lib/bsp/help.py
> @@ -115,6 +115,18 @@ yocto_bsp_create_usage = """
> 'properties' that will be used to fill out the BSP-specific portions
> of the BSP. The possible values for the 'karch' paramter can be
> listed via 'yocto-bsp list karch'.
> +
> + NOTE: Once created, you should add your new layer to your
> + bblayers.conf file in order for it to be subsquently seen and
Gah, I didn't catch this the first time. Typo in "subsequently" above.
Maybe just fix in the branch? No need to resend.
> + modified by the yocto-kernel tool.
> +
> + See 'yocto bsp help create' for more detailed instructions.
> +
> + NOTE: For x86- and x86_64-based BSPs, the generated BSP assumes the
> + presence of the of the meta-intel layer. Ensure the meta-intel layer
> + is present and added to bblayers.conf.
> +
> + See 'yocto bsp help create' for more detailed instructions.
> """
>
> yocto_bsp_create_help = """
> @@ -159,9 +171,37 @@ DESCRIPTION
> bblayers.conf file in order for it to be subsquently seen and
Here too.
Otherwise looks good,
Acked-by: Darren Hart <dvhart@linux.intel.com>
> modified by the yocto-kernel tool.
>
> - NOTE for x86- and x86_64-based BSPs: The generated BSP assumes the
> - presence of the of the meta-intel layer, so you should also have a
> - meta-intel layer present and added to your bblayers.conf as well.
> + For example, assuming your poky repo is at /path/to/poky, your new
> + BSP layer is at /path/to/poky/meta-mybsp, and your build directory
> + is /path/to/build:
> +
> + $ gedit /path/to/build/conf/bblayers.conf
> +
> + BBLAYERS ?= " \\
> + /path/to/poky/meta \\
> + /path/to/poky/meta-yocto \\
> + /path/to/poky/meta-mybsp \\
> + "
> +
> + NOTE: For x86- and x86_64-based BSPs, the generated BSP assumes
> + the presence of the of the meta-intel layer. Ensure the meta-intel
> + layer is present and added to bblayers.conf.
> +
> + For example, assuming your poky repo is at /path/to/poky, your new
> + BSP layer is at /path/to/poky/meta-mybsp, and your build directory
> + is /path/to/build:
> +
> + $ cd /path/to/poky
> + $ git clone git://git.yoctoproject.org/meta-intel.git
> +
> + $ gedit /path/to/build/conf/bblayers.conf
> +
> + BBLAYERS ?= " \\
> + /path/to/poky/meta \\
> + /path/to/poky/meta-yocto \\
> + /path/to/poky/meta-intel \\
> + /path/to/poky/meta-mybsp \\
> + "
> """
>
> yocto_bsp_list_usage = """
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel
2012-04-28 5:44 ` Darren Hart
@ 2012-04-28 5:51 ` Tom Zanussi
0 siblings, 0 replies; 15+ messages in thread
From: Tom Zanussi @ 2012-04-28 5:51 UTC (permalink / raw)
To: Darren Hart; +Cc: yocto
On Fri, 2012-04-27 at 22:44 -0700, Darren Hart wrote:
>
> On 04/27/2012 05:25 PM, tom.zanussi@intel.com wrote:
> > From: Tom Zanussi <tom.zanussi@intel.com>
> >
> > The current yocto-bsp help assumes knowledge that the meta-intel layer
> > needs to be cloned before it's put into the BBLAYERS. Avoid the
> > guesswork and state the details explicitly in the help.
> >
> > Also, the shorter 'usage' string doesn't mention it at all; it would
> > help to at minimum mention it and refer the user to the detailed help.
> >
> > Fixes [YOCTO #2330].
> >
> > Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
> > ---
> > scripts/lib/bsp/help.py | 46 +++++++++++++++++++++++++++++++++++++++++++---
> > 1 files changed, 43 insertions(+), 3 deletions(-)
> >
> > diff --git a/scripts/lib/bsp/help.py b/scripts/lib/bsp/help.py
> > index f78b09b..2355657 100644
> > --- a/scripts/lib/bsp/help.py
> > +++ b/scripts/lib/bsp/help.py
> > @@ -115,6 +115,18 @@ yocto_bsp_create_usage = """
> > 'properties' that will be used to fill out the BSP-specific portions
> > of the BSP. The possible values for the 'karch' paramter can be
> > listed via 'yocto-bsp list karch'.
> > +
> > + NOTE: Once created, you should add your new layer to your
> > + bblayers.conf file in order for it to be subsquently seen and
>
> Gah, I didn't catch this the first time. Typo in "subsequently" above.
> Maybe just fix in the branch? No need to resend.
>
Good catch again, thanks. Updated in the branch...
Tom
> > + modified by the yocto-kernel tool.
> > +
> > + See 'yocto bsp help create' for more detailed instructions.
> > +
> > + NOTE: For x86- and x86_64-based BSPs, the generated BSP assumes the
> > + presence of the of the meta-intel layer. Ensure the meta-intel layer
> > + is present and added to bblayers.conf.
> > +
> > + See 'yocto bsp help create' for more detailed instructions.
> > """
> >
> > yocto_bsp_create_help = """
> > @@ -159,9 +171,37 @@ DESCRIPTION
> > bblayers.conf file in order for it to be subsquently seen and
>
> Here too.
>
> Otherwise looks good,
>
> Acked-by: Darren Hart <dvhart@linux.intel.com>
>
> > modified by the yocto-kernel tool.
> >
> > - NOTE for x86- and x86_64-based BSPs: The generated BSP assumes the
> > - presence of the of the meta-intel layer, so you should also have a
> > - meta-intel layer present and added to your bblayers.conf as well.
> > + For example, assuming your poky repo is at /path/to/poky, your new
> > + BSP layer is at /path/to/poky/meta-mybsp, and your build directory
> > + is /path/to/build:
> > +
> > + $ gedit /path/to/build/conf/bblayers.conf
> > +
> > + BBLAYERS ?= " \\
> > + /path/to/poky/meta \\
> > + /path/to/poky/meta-yocto \\
> > + /path/to/poky/meta-mybsp \\
> > + "
> > +
> > + NOTE: For x86- and x86_64-based BSPs, the generated BSP assumes
> > + the presence of the of the meta-intel layer. Ensure the meta-intel
> > + layer is present and added to bblayers.conf.
> > +
> > + For example, assuming your poky repo is at /path/to/poky, your new
> > + BSP layer is at /path/to/poky/meta-mybsp, and your build directory
> > + is /path/to/build:
> > +
> > + $ cd /path/to/poky
> > + $ git clone git://git.yoctoproject.org/meta-intel.git
> > +
> > + $ gedit /path/to/build/conf/bblayers.conf
> > +
> > + BBLAYERS ?= " \\
> > + /path/to/poky/meta \\
> > + /path/to/poky/meta-yocto \\
> > + /path/to/poky/meta-intel \\
> > + /path/to/poky/meta-mybsp \\
> > + "
> > """
> >
> > yocto_bsp_list_usage = """
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 1/2] yocto-kernel: use BUILDDIR to find bblayers.conf
2012-04-30 19:12 ` [PATCH 0/2] A couple yocto-bsp fixes, v3 tom.zanussi
@ 2012-04-30 19:12 tom.zanussi
2012-04-30 19:12 ` [PATCH 0/2] A couple yocto-bsp fixes, v3 tom.zanussi
0 siblings, 1 reply; 15+ messages in thread
From: tom.zanussi @ 2012-04-30 19:12 UTC (permalink / raw)
To: yocto
From: Tom Zanussi <tom.zanussi@intel.com>
The current code assumes that builddir == srcdir/build, which it
obviously isn't sometimes. Use BUILDDIR to get the actual builddir
being used.
Fixes [YOCTO #2219].
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
---
scripts/lib/bsp/kernel.py | 7 ++++++-
1 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/scripts/lib/bsp/kernel.py b/scripts/lib/bsp/kernel.py
index 360851b..8b3aa72 100644
--- a/scripts/lib/bsp/kernel.py
+++ b/scripts/lib/bsp/kernel.py
@@ -37,7 +37,12 @@ def find_bblayers(scripts_path):
"""
Find and return a sanitized list of the layers found in BBLAYERS.
"""
- bblayers_conf = os.path.join(scripts_path, "../build/conf/bblayers.conf")
+ try:
+ builddir = os.environ["BUILDDIR"]
+ except KeyError:
+ print "BUILDDIR not found, exiting. (Did you forget to source oe-init-build-env?)"
+ sys.exit(1)
+ bblayers_conf = os.path.join(builddir, "conf/bblayers.conf")
layers = []
--
1.7.0.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 0/2] A couple yocto-bsp fixes, v3
@ 2012-04-30 19:12 ` tom.zanussi
2012-04-30 19:12 ` [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel tom.zanussi
0 siblings, 1 reply; 15+ messages in thread
From: tom.zanussi @ 2012-04-30 19:12 UTC (permalink / raw)
To: yocto
From: Tom Zanussi <tom.zanussi@intel.com>
Fixes for a couple yocto-bsp bugs.
v2: fixed up the yocto-bsp help text as suggested by Darren Hart.
v3: fixed more of the yocto-bsp help text as suggested by William Mills.
The following changes since commit f39ba520d6f2477c99839a92049b1bb279f092cf:
Richard Purdie (1):
qt-4.8.1: Fix compile failures on qemux86
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib.git tzanussi/yocto-bsp-fixes-2219-2330
http://git.yoctoproject.org/cgit/cgit.cgi/poky-contrib/log/?h=tzanussi/yocto-bsp-fixes-2219-2330
Tom Zanussi (2):
yocto-kernel: use BUILDDIR to find bblayers.conf
yocto-bsp: clarify help with reference to meta-intel
scripts/lib/bsp/help.py | 48 +++++++++++++++++++++++++++++++++++++++++---
scripts/lib/bsp/kernel.py | 7 +++++-
2 files changed, 50 insertions(+), 5 deletions(-)
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel
2012-04-30 19:12 ` [PATCH 0/2] A couple yocto-bsp fixes, v3 tom.zanussi
@ 2012-04-30 19:12 ` tom.zanussi
2012-04-30 23:49 ` Darren Hart
0 siblings, 1 reply; 15+ messages in thread
From: tom.zanussi @ 2012-04-30 19:12 UTC (permalink / raw)
To: yocto
From: Tom Zanussi <tom.zanussi@intel.com>
The current yocto-bsp help assumes knowledge that the meta-intel layer
needs to be cloned before it's put into the BBLAYERS. Avoid the
guesswork and state the details explicitly in the help.
Also, the shorter 'usage' string doesn't mention it at all; it would
help to at minimum mention it and refer the user to the detailed help.
Fixes [YOCTO #2330].
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
---
scripts/lib/bsp/help.py | 48 +++++++++++++++++++++++++++++++++++++++++++---
1 files changed, 44 insertions(+), 4 deletions(-)
diff --git a/scripts/lib/bsp/help.py b/scripts/lib/bsp/help.py
index f78b09b..2d16d2e 100644
--- a/scripts/lib/bsp/help.py
+++ b/scripts/lib/bsp/help.py
@@ -115,6 +115,18 @@ yocto_bsp_create_usage = """
'properties' that will be used to fill out the BSP-specific portions
of the BSP. The possible values for the 'karch' paramter can be
listed via 'yocto-bsp list karch'.
+
+ NOTE: Once created, you should add your new layer to your
+ bblayers.conf file in order for it to be subsequently seen and
+ modified by the yocto-kernel tool.
+
+ See 'yocto bsp help create' for more detailed instructions.
+
+ NOTE: For x86- and x86_64-based BSPs, the generated BSP assumes the
+ presence of the meta-intel layer. Ensure the meta-intel layer is
+ present and added to bblayers.conf.
+
+ See 'yocto bsp help create' for more detailed instructions.
"""
yocto_bsp_create_help = """
@@ -156,12 +168,40 @@ DESCRIPTION
current directory, and is useful for debugging.
NOTE: Once created, you should add your new layer to your
- bblayers.conf file in order for it to be subsquently seen and
+ bblayers.conf file in order for it to be subsequently seen and
modified by the yocto-kernel tool.
- NOTE for x86- and x86_64-based BSPs: The generated BSP assumes the
- presence of the of the meta-intel layer, so you should also have a
- meta-intel layer present and added to your bblayers.conf as well.
+ For example, assuming your poky repo is at /path/to/poky, your new
+ BSP layer is at /path/to/poky/meta-mybsp, and your build directory
+ is /path/to/build:
+
+ $ gedit /path/to/build/conf/bblayers.conf
+
+ BBLAYERS ?= " \\
+ /path/to/poky/meta \\
+ /path/to/poky/meta-yocto \\
+ /path/to/poky/meta-mybsp \\
+ "
+
+ NOTE: For x86- and x86_64-based BSPs, the generated BSP assumes
+ the presence of the meta-intel layer. Ensure the meta-intel layer
+ is present and added to bblayers.conf.
+
+ For example, assuming your poky repo is at /path/to/poky, your new
+ BSP layer is at /path/to/poky/meta-mybsp, and your build directory
+ is /path/to/build:
+
+ $ cd /path/to/poky
+ $ git clone git://git.yoctoproject.org/meta-intel.git
+
+ $ gedit /path/to/build/conf/bblayers.conf
+
+ BBLAYERS ?= " \\
+ /path/to/poky/meta \\
+ /path/to/poky/meta-yocto \\
+ /path/to/poky/meta-intel \\
+ /path/to/poky/meta-mybsp \\
+ "
"""
yocto_bsp_list_usage = """
--
1.7.0.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel
2012-04-30 19:12 ` [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel tom.zanussi
@ 2012-04-30 23:49 ` Darren Hart
0 siblings, 0 replies; 15+ messages in thread
From: Darren Hart @ 2012-04-30 23:49 UTC (permalink / raw)
To: tom.zanussi; +Cc: yocto
On 04/30/2012 12:12 PM, tom.zanussi@intel.com wrote:
> From: Tom Zanussi <tom.zanussi@intel.com>
>
> The current yocto-bsp help assumes knowledge that the meta-intel layer
> needs to be cloned before it's put into the BBLAYERS. Avoid the
> guesswork and state the details explicitly in the help.
>
> Also, the shorter 'usage' string doesn't mention it at all; it would
> help to at minimum mention it and refer the user to the detailed help.
>
> Fixes [YOCTO #2330].
>
> Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
> ---
> scripts/lib/bsp/help.py | 48 +++++++++++++++++++++++++++++++++++++++++++---
> 1 files changed, 44 insertions(+), 4 deletions(-)
>
> diff --git a/scripts/lib/bsp/help.py b/scripts/lib/bsp/help.py
> index f78b09b..2d16d2e 100644
> --- a/scripts/lib/bsp/help.py
> +++ b/scripts/lib/bsp/help.py
> @@ -115,6 +115,18 @@ yocto_bsp_create_usage = """
> 'properties' that will be used to fill out the BSP-specific portions
> of the BSP. The possible values for the 'karch' paramter can be
> listed via 'yocto-bsp list karch'.
> +
> + NOTE: Once created, you should add your new layer to your
> + bblayers.conf file in order for it to be subsequently seen and
> + modified by the yocto-kernel tool.
> +
> + See 'yocto bsp help create' for more detailed instructions.
> +
> + NOTE: For x86- and x86_64-based BSPs, the generated BSP assumes the
> + presence of the meta-intel layer. Ensure the meta-intel layer is
> + present and added to bblayers.conf.
> +
> + See 'yocto bsp help create' for more detailed instructions.
> """
>
> yocto_bsp_create_help = """
> @@ -156,12 +168,40 @@ DESCRIPTION
> current directory, and is useful for debugging.
>
> NOTE: Once created, you should add your new layer to your
> - bblayers.conf file in order for it to be subsquently seen and
> + bblayers.conf file in order for it to be subsequently seen and
> modified by the yocto-kernel tool.
>
> - NOTE for x86- and x86_64-based BSPs: The generated BSP assumes the
> - presence of the of the meta-intel layer, so you should also have a
> - meta-intel layer present and added to your bblayers.conf as well.
> + For example, assuming your poky repo is at /path/to/poky, your new
> + BSP layer is at /path/to/poky/meta-mybsp, and your build directory
> + is /path/to/build:
> +
> + $ gedit /path/to/build/conf/bblayers.conf
> +
> + BBLAYERS ?= " \\
> + /path/to/poky/meta \\
> + /path/to/poky/meta-yocto \\
> + /path/to/poky/meta-mybsp \\
> + "
> +
> + NOTE: For x86- and x86_64-based BSPs, the generated BSP assumes
> + the presence of the meta-intel layer. Ensure the meta-intel layer
> + is present and added to bblayers.conf.
> +
> + For example, assuming your poky repo is at /path/to/poky, your new
> + BSP layer is at /path/to/poky/meta-mybsp, and your build directory
> + is /path/to/build:
> +
> + $ cd /path/to/poky
> + $ git clone git://git.yoctoproject.org/meta-intel.git
> +
> + $ gedit /path/to/build/conf/bblayers.conf
> +
> + BBLAYERS ?= " \\
> + /path/to/poky/meta \\
> + /path/to/poky/meta-yocto \\
> + /path/to/poky/meta-intel \\
> + /path/to/poky/meta-mybsp \\
> + "
> """
>
> yocto_bsp_list_usage = """
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2012-04-30 23:49 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-04-18 21:26 [PATCH 0/2] A couple yocto-bsp fixes tom.zanussi
2012-04-18 21:26 ` [PATCH 1/2] yocto-kernel: use BUILDDIR to find bblayers.conf tom.zanussi
2012-04-27 23:56 ` Darren Hart
2012-04-18 21:26 ` [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel tom.zanussi
2012-04-28 0:01 ` Darren Hart
2012-04-28 0:26 ` Tom Zanussi
2012-04-30 17:31 ` William Mills
2012-04-30 17:36 ` Darren Hart
2012-04-30 18:33 ` Autif Khan
2012-04-30 19:13 ` Tom Zanussi
2012-04-28 0:25 [PATCH 1/2] yocto-kernel: use BUILDDIR to find bblayers.conf tom.zanussi
2012-04-28 0:25 ` [PATCH 0/2] A couple yocto-bsp fixes, v2 tom.zanussi
2012-04-28 0:25 ` [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel tom.zanussi
2012-04-28 5:44 ` Darren Hart
2012-04-28 5:51 ` Tom Zanussi
2012-04-30 19:12 [PATCH 1/2] yocto-kernel: use BUILDDIR to find bblayers.conf tom.zanussi
2012-04-30 19:12 ` [PATCH 0/2] A couple yocto-bsp fixes, v3 tom.zanussi
2012-04-30 19:12 ` [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel tom.zanussi
2012-04-30 23:49 ` Darren Hart
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.