* Compex WLE1216V2-20 (QCA9984) firmware is missing
@ 2018-03-27 16:41 ojab //
2018-04-15 15:12 ` ojab //
2018-04-16 13:48 ` Josh Boyer
0 siblings, 2 replies; 7+ messages in thread
From: ojab // @ 2018-03-27 16:41 UTC (permalink / raw)
To: linux-wireless, linux-firmware, kvalo
[please CC me since I'm not subscribed to the lists and terribly sorry
for HTML mails]
Oh hai!
I have Compex WLE1216V2-20 (based on QCA9984 chip) that isn't
supported by linux-firmware (git master), card init fails with
>[Mon Mar 26 17:18:47 2018] ath10k_pci 0000:05:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=30 from ath10k/QCA9984/hw1.0/board-2.bin
It works fine with board-2.bin from the compex website [1] (can be
downloaded directly from
https://bugzilla.kernel.org/attachment.cgi?id=274959).
What should be done to have it upstreamed?
[1] https://downloads.compex.com.sg/?dir=uploads/boardData/For_Building_New_Firmware
//wbr ojab
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Compex WLE1216V2-20 (QCA9984) firmware is missing
2018-03-27 16:41 Compex WLE1216V2-20 (QCA9984) firmware is missing ojab //
@ 2018-04-15 15:12 ` ojab //
2018-04-16 13:48 ` Josh Boyer
1 sibling, 0 replies; 7+ messages in thread
From: ojab // @ 2018-04-15 15:12 UTC (permalink / raw)
To: linux-wireless, linux-firmware, kvalo
Gentle ping.
//wbr ojab
On Tue, Mar 27, 2018 at 4:41 PM, ojab // <ojab@ojab.ru> wrote:
> [please CC me since I'm not subscribed to the lists and terribly sorry
> for HTML mails]
>
> Oh hai!
>
> I have Compex WLE1216V2-20 (based on QCA9984 chip) that isn't
> supported by linux-firmware (git master), card init fails with
>
>>[Mon Mar 26 17:18:47 2018] ath10k_pci 0000:05:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=30 from ath10k/QCA9984/hw1.0/board-2.bin
>
> It works fine with board-2.bin from the compex website [1] (can be
> downloaded directly from
> https://bugzilla.kernel.org/attachment.cgi?id=274959).
> What should be done to have it upstreamed?
>
> [1] https://downloads.compex.com.sg/?dir=uploads/boardData/For_Building_New_Firmware
>
> //wbr ojab
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Compex WLE1216V2-20 (QCA9984) firmware is missing
2018-03-27 16:41 Compex WLE1216V2-20 (QCA9984) firmware is missing ojab //
2018-04-15 15:12 ` ojab //
@ 2018-04-16 13:48 ` Josh Boyer
2018-04-16 13:54 ` Kalle Valo
1 sibling, 1 reply; 7+ messages in thread
From: Josh Boyer @ 2018-04-16 13:48 UTC (permalink / raw)
To: ojab //; +Cc: Linux Wireless, Linux Firmware, Kalle Valo
On Tue, Mar 27, 2018 at 12:41 PM, ojab // <ojab@ojab.ru> wrote:
> [please CC me since I'm not subscribed to the lists and terribly sorry
> for HTML mails]
>
> Oh hai!
>
> I have Compex WLE1216V2-20 (based on QCA9984 chip) that isn't
> supported by linux-firmware (git master), card init fails with
>
>>[Mon Mar 26 17:18:47 2018] ath10k_pci 0000:05:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=30 from ath10k/QCA9984/hw1.0/board-2.bin
>
> It works fine with board-2.bin from the compex website [1] (can be
> downloaded directly from
> https://bugzilla.kernel.org/attachment.cgi?id=274959).
> What should be done to have it upstreamed?
This is likely a question for Kalle. I would expect an update to the
existing board-2.bin file submitted through Qualcomm with support for
that device.
josh
>
> [1] https://downloads.compex.com.sg/?dir=uploads/boardData/For_Building_New_Firmware
>
> //wbr ojab
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Compex WLE1216V2-20 (QCA9984) firmware is missing
2018-04-16 13:48 ` Josh Boyer
@ 2018-04-16 13:54 ` Kalle Valo
2018-04-16 13:59 ` ojab //
0 siblings, 1 reply; 7+ messages in thread
From: Kalle Valo @ 2018-04-16 13:54 UTC (permalink / raw)
To: Josh Boyer; +Cc: ojab //, Linux Wireless, Linux Firmware
Josh Boyer <jwboyer@kernel.org> writes:
> On Tue, Mar 27, 2018 at 12:41 PM, ojab // <ojab@ojab.ru> wrote:
>> [please CC me since I'm not subscribed to the lists and terribly sorry
>> for HTML mails]
>>
>> Oh hai!
>>
>> I have Compex WLE1216V2-20 (based on QCA9984 chip) that isn't
>> supported by linux-firmware (git master), card init fails with
>>
>>>[Mon Mar 26 17:18:47 2018] ath10k_pci 0000:05:00.0: failed to fetch
>> board data for bus=3Dpci,bmi-chip-id=3D0,bmi-board-id=3D30 from
>> ath10k/QCA9984/hw1.0/board-2.bin
>>
>> It works fine with board-2.bin from the compex website [1] (can be
>> downloaded directly from
>> https://bugzilla.kernel.org/attachment.cgi?id=3D274959).
>> What should be done to have it upstreamed?
>
> This is likely a question for Kalle. I would expect an update to the
> existing board-2.bin file submitted through Qualcomm with support for
> that device.
Yes, this should have been sent to the ath10k list, not to
linux-firmware.
https://wireless.wiki.kernel.org/en/users/drivers/ath10k/support
--=20
Kalle Valo=
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Compex WLE1216V2-20 (QCA9984) firmware is missing
2018-04-16 13:54 ` Kalle Valo
@ 2018-04-16 13:59 ` ojab //
0 siblings, 0 replies; 7+ messages in thread
From: ojab // @ 2018-04-16 13:59 UTC (permalink / raw)
To: Kalle Valo; +Cc: Josh Boyer, Linux Wireless, Linux Firmware
On Mon, Apr 16, 2018 at 1:54 PM, Kalle Valo <kvalo@qca.qualcomm.com> wrote:
> Josh Boyer <jwboyer@kernel.org> writes:
>
>> On Tue, Mar 27, 2018 at 12:41 PM, ojab // <ojab@ojab.ru> wrote:
>>> [please CC me since I'm not subscribed to the lists and terribly sorry
>>> for HTML mails]
>>>
>>> Oh hai!
>>>
>>> I have Compex WLE1216V2-20 (based on QCA9984 chip) that isn't
>>> supported by linux-firmware (git master), card init fails with
>>>
>>>>[Mon Mar 26 17:18:47 2018] ath10k_pci 0000:05:00.0: failed to fetch
>>> board data for bus=pci,bmi-chip-id=0,bmi-board-id=30 from
>>> ath10k/QCA9984/hw1.0/board-2.bin
>>>
>>> It works fine with board-2.bin from the compex website [1] (can be
>>> downloaded directly from
>>> https://bugzilla.kernel.org/attachment.cgi?id=274959).
>>> What should be done to have it upstreamed?
>>
>> This is likely a question for Kalle. I would expect an update to the
>> existing board-2.bin file submitted through Qualcomm with support for
>> that device.
>
> Yes, this should have been sent to the ath10k list, not to
> linux-firmware.
>
> https://wireless.wiki.kernel.org/en/users/drivers/ath10k/support
Thanks, sent the same email there.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Compex WLE1216V2-20 (QCA9984) firmware is missing
2018-04-16 13:59 ojab //
@ 2018-04-16 14:05 ` ojab //
0 siblings, 0 replies; 7+ messages in thread
From: ojab // @ 2018-04-16 14:05 UTC (permalink / raw)
To: ath10k
On Mon, Apr 16, 2018 at 1:59 PM, ojab // <ojab@ojab.ru> wrote:
> [please CC me since I'm not subscribed to the lists and terribly sorry
> for HTML mails]
>
> Oh hai!
>
> I have Compex WLE1216V2-20 (based on QCA9984 chip) that isn't
> supported by linux-firmware (git master), card init fails with
>
>>[Mon Mar 26 17:18:47 2018] ath10k_pci 0000:05:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=30 from ath10k/QCA9984/hw1.0/board-2.bin
>
> It works fine with board-2.bin from the compex website [1] (can be
> downloaded directly from
> https://bugzilla.kernel.org/attachment.cgi?id=274959).
> What should be done to have it upstreamed?
>
> [1] https://downloads.compex.com.sg/?dir=uploads/boardData/For_Building_New_Firmware
>
> //wbr ojab
…and I actually have found `Please add new board files for
WLE1216V5-20 and another Compex NIC.`
with link to https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles,
which basically describes the same issue.
I assume that my email can be ignored for now.
//wbr ojab
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 7+ messages in thread
* Compex WLE1216V2-20 (QCA9984) firmware is missing
@ 2018-04-16 13:59 ojab //
2018-04-16 14:05 ` ojab //
0 siblings, 1 reply; 7+ messages in thread
From: ojab // @ 2018-04-16 13:59 UTC (permalink / raw)
To: ath10k
[please CC me since I'm not subscribed to the lists and terribly sorry
for HTML mails]
Oh hai!
I have Compex WLE1216V2-20 (based on QCA9984 chip) that isn't
supported by linux-firmware (git master), card init fails with
>[Mon Mar 26 17:18:47 2018] ath10k_pci 0000:05:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=30 from ath10k/QCA9984/hw1.0/board-2.bin
It works fine with board-2.bin from the compex website [1] (can be
downloaded directly from
https://bugzilla.kernel.org/attachment.cgi?id=274959).
What should be done to have it upstreamed?
[1] https://downloads.compex.com.sg/?dir=uploads/boardData/For_Building_New_Firmware
//wbr ojab
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2018-04-16 14:05 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-27 16:41 Compex WLE1216V2-20 (QCA9984) firmware is missing ojab //
2018-04-15 15:12 ` ojab //
2018-04-16 13:48 ` Josh Boyer
2018-04-16 13:54 ` Kalle Valo
2018-04-16 13:59 ` ojab //
2018-04-16 13:59 ojab //
2018-04-16 14:05 ` ojab //
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.