All of lore.kernel.org
 help / color / mirror / Atom feed
From: dillon min <dillon.minfei@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
	Alexandre TORGUE <alexandre.torgue@foss.st.com>,
	Ahmad Fatoum <a.fatoum@pengutronix.de>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>,
	linux-stm32@st-md-mailman.stormreply.com,
	Linux ARM <linux-arm-kernel@lists.infradead.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	linux@armlinux.org.uk, Vladimir Murzin <vladimir.murzin@arm.com>,
	afzal.mohd.ma@gmail.com, gregkh@linuxfoundation.org,
	erwan.leray@st.com, erwan.leray@foss.st.com,
	linux-serial@vger.kernel.org, lkp@intel.com
Subject: Re: [PATCH v3 9/9] dt-bindings: serial: stm32: add phandle 'bluetooth' to fix dtbs_check warrning
Date: Fri, 19 Mar 2021 12:28:26 +0800	[thread overview]
Message-ID: <CAL9mu0Lfj+n4uk2rT8QnDtRveHn2gLx4ut6fLCByt0w9e08vwQ@mail.gmail.com> (raw)
In-Reply-To: <1615801436-3016-10-git-send-email-dillon.minfei@gmail.com>

No changes, Just loop lkp in.


Hi lkp,

Sorry for the late reply, thanks for your report.
This patch is to fix the build warning message.

Thanks.
Regards

On Mon, Mar 15, 2021 at 5:45 PM <dillon.minfei@gmail.com> wrote:
>
> From: dillon min <dillon.minfei@gmail.com>
>
> when run make dtbs_check with 'bluetoothi brcm,bcm43438-bt'
> dts enabled on stm32h7, there is a warrning popup:
>
> >> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800: 'bluetooth'
>    does not match any of the regexes: 'pinctrl-[0-9]+'
>
> to make dtbs_check happy, so add a phandle bluetooth
>
> Fixes: 500cdb23d608 ("ARM: dts: stm32: Add STM32H743 MCU and STM32H743i-EVAL board")
> Signed-off-by: dillon min <dillon.minfei@gmail.com>
> Reported-by: kernel test robot <lkp@intel.com>
> ---
>  Documentation/devicetree/bindings/serial/st,stm32-uart.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
> index 8631678283f9..5e674840e62d 100644
> --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
> @@ -50,6 +50,11 @@ properties:
>      minItems: 1
>      maxItems: 2
>
> +  bluetooth:
> +    type: object
> +    description: |
> +      phandles to the usart controller and bluetooth
> +
>  # cts-gpios and rts-gpios properties can be used instead of 'uart-has-rtscts'
>  # or 'st,hw-flow-ctrl' (deprecated) for making use of any gpio pins for flow
>  # control instead of dedicated pins.
> --
> 1.9.1
>

WARNING: multiple messages have this Message-ID (diff)
From: dillon min <dillon.minfei@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
	Alexandre TORGUE <alexandre.torgue@foss.st.com>,
	 Ahmad Fatoum <a.fatoum@pengutronix.de>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	 Alexandre Torgue <alexandre.torgue@st.com>,
	 "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	linux-stm32@st-md-mailman.stormreply.com,
	 Linux ARM <linux-arm-kernel@lists.infradead.org>,
	 Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	linux@armlinux.org.uk, Vladimir Murzin <vladimir.murzin@arm.com>,
	afzal.mohd.ma@gmail.com,  gregkh@linuxfoundation.org,
	erwan.leray@st.com, erwan.leray@foss.st.com,
	 linux-serial@vger.kernel.org, lkp@intel.com
Subject: Re: [PATCH v3 9/9] dt-bindings: serial: stm32: add phandle 'bluetooth' to fix dtbs_check warrning
Date: Fri, 19 Mar 2021 12:28:26 +0800	[thread overview]
Message-ID: <CAL9mu0Lfj+n4uk2rT8QnDtRveHn2gLx4ut6fLCByt0w9e08vwQ@mail.gmail.com> (raw)
In-Reply-To: <1615801436-3016-10-git-send-email-dillon.minfei@gmail.com>

No changes, Just loop lkp in.


Hi lkp,

Sorry for the late reply, thanks for your report.
This patch is to fix the build warning message.

Thanks.
Regards

On Mon, Mar 15, 2021 at 5:45 PM <dillon.minfei@gmail.com> wrote:
>
> From: dillon min <dillon.minfei@gmail.com>
>
> when run make dtbs_check with 'bluetoothi brcm,bcm43438-bt'
> dts enabled on stm32h7, there is a warrning popup:
>
> >> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800: 'bluetooth'
>    does not match any of the regexes: 'pinctrl-[0-9]+'
>
> to make dtbs_check happy, so add a phandle bluetooth
>
> Fixes: 500cdb23d608 ("ARM: dts: stm32: Add STM32H743 MCU and STM32H743i-EVAL board")
> Signed-off-by: dillon min <dillon.minfei@gmail.com>
> Reported-by: kernel test robot <lkp@intel.com>
> ---
>  Documentation/devicetree/bindings/serial/st,stm32-uart.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
> index 8631678283f9..5e674840e62d 100644
> --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
> @@ -50,6 +50,11 @@ properties:
>      minItems: 1
>      maxItems: 2
>
> +  bluetooth:
> +    type: object
> +    description: |
> +      phandles to the usart controller and bluetooth
> +
>  # cts-gpios and rts-gpios properties can be used instead of 'uart-has-rtscts'
>  # or 'st,hw-flow-ctrl' (deprecated) for making use of any gpio pins for flow
>  # control instead of dedicated pins.
> --
> 1.9.1
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-03-19  4:29 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-15  9:43 [PATCH v3 0/9] ARM: STM32: add art-pi(stm32h750xbh6) board support dillon.minfei
2021-03-15  9:43 ` dillon.minfei
2021-03-15  9:43 ` [PATCH v3 1/9] Documentation: arm: stm32: Add stm32h750 value line doc dillon.minfei
2021-03-15  9:43   ` dillon.minfei
2021-03-15  9:43 ` [PATCH v3 2/9] dt-bindings: arm: stm32: Add compatible strings for ART-PI board dillon.minfei
2021-03-15  9:43   ` dillon.minfei
2021-03-15 16:26   ` Rob Herring
2021-03-15 16:26     ` Rob Herring
2021-03-15 15:10     ` dillon min
2021-03-15 15:10       ` dillon min
2021-03-15  9:43 ` [PATCH v3 3/9] dt-bindings: pinctrl: stm32: Add stm32h750 pinctrl dillon.minfei
2021-03-15  9:43   ` dillon.minfei
2021-03-15 16:26   ` Rob Herring
2021-03-15 16:26     ` Rob Herring
2021-03-15 15:11     ` dillon min
2021-03-15 15:11       ` dillon min
2021-03-15  9:43 ` [PATCH v3 4/9] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750 dillon.minfei
2021-03-15  9:43   ` dillon.minfei
2021-03-15  9:43 ` [PATCH v3 5/9] ARM: dts: stm32: add stm32h750-pinctrl.dtsi dillon.minfei
2021-03-15  9:43   ` dillon.minfei
2021-03-15  9:43 ` [PATCH v3 6/9] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 dillon.minfei
2021-03-15  9:43   ` dillon.minfei
2021-03-19  4:27   ` dillon min
2021-03-19  4:27     ` dillon min
2021-03-15  9:43 ` [PATCH v3 7/9] ARM: stm32: Add a new SOC - STM32H750 dillon.minfei
2021-03-15  9:43   ` dillon.minfei
2021-03-15  9:43 ` [PATCH v3 8/9] pinctrl: stm32: Add STM32H750 MCU pinctrl support dillon.minfei
2021-03-15  9:43   ` dillon.minfei
2021-03-15  9:43 ` [PATCH v3 9/9] dt-bindings: serial: stm32: add phandle 'bluetooth' to fix dtbs_check warrning dillon.minfei
2021-03-15  9:43   ` dillon.minfei
2021-03-19  4:28   ` dillon min [this message]
2021-03-19  4:28     ` dillon min
2021-03-19  8:38     ` Alexandre TORGUE
2021-03-19  8:38       ` Alexandre TORGUE
2021-03-19 11:13       ` dillon min
2021-03-19 11:13         ` dillon min
2021-03-24 17:45         ` Rob Herring
2021-03-24 17:45           ` Rob Herring
2021-03-25  5:40           ` dillon min
2021-03-25  5:40             ` dillon min

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAL9mu0Lfj+n4uk2rT8QnDtRveHn2gLx4ut6fLCByt0w9e08vwQ@mail.gmail.com \
    --to=dillon.minfei@gmail.com \
    --cc=a.fatoum@pengutronix.de \
    --cc=afzal.mohd.ma@gmail.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=alexandre.torgue@st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=erwan.leray@foss.st.com \
    --cc=erwan.leray@st.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=linux@armlinux.org.uk \
    --cc=lkp@intel.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=vladimir.murzin@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.