* [GIT PULL] PCI: dt: Remove magic numbers for legacy PCI IRQ interrupts
@ 2019-12-11 16:18 Andrew Murray
2019-12-11 16:58 ` Olof Johansson
0 siblings, 1 reply; 4+ messages in thread
From: Andrew Murray @ 2019-12-11 16:18 UTC (permalink / raw)
To: soc, Rob Herring; +Cc: devicetree, linux-pci
Hi Arnd,
Please consider this pull request.
The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a:
Linux 5.5-rc1 (2019-12-08 14:57:55 -0800)
are available in the Git repository at:
git://linux-arm.org/linux-am.git tags/pci-dt-intx-defines-5.5-rc1
for you to fetch changes up to d50e85b9ad3d4287ab3c5108b7b36ad4fd50e5b4:
dt-bindings: PCI: Use IRQ flags for legacy PCI IRQ interrupts (2019-12-11 16:05:55 +0000)
----------------------------------------------------------------
PCI: dt: Remove magic numbers for legacy PCI IRQ interrupts
PCI devices can trigger interrupts via 4 physical/virtual lines known
as INTA, INTB, INTC or INTD. Due to interrupt swizzling it is often
required to describe the interrupt mapping in the device tree. Let's
avoid the existing magic numbers and replace them with a #define to
improve clarity.
This is based on v5.5-rc1. As this series covers multiple architectures
and updates include/dt-bindings it was felt that it may be more
convenient to merge in one go.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
----------------------------------------------------------------
Andrew Murray (7):
PCI: dt: Add legacy PCI IRQ defines
arm64: dts: Use IRQ flags for legacy PCI IRQ interrupts
arm: dts: Use IRQ flags for legacy PCI IRQ interrupts
xtensa: dts: Use IRQ flags for legacy PCI IRQ interrupts
powerpc: dts: fsl: Use IRQ flags for legacy PCI IRQ interrupts
powerpc: dts: Use IRQ flags for legacy PCI IRQ interrupts
dt-bindings: PCI: Use IRQ flags for legacy PCI IRQ interrupts
.../devicetree/bindings/pci/83xx-512x-pci.txt | 21 +--
.../devicetree/bindings/pci/aardvark-pci.txt | 12 +-
.../devicetree/bindings/pci/altera-pcie.txt | 13 +-
.../devicetree/bindings/pci/axis,artpec6-pcie.txt | 12 +-
.../bindings/pci/cdns,cdns-pcie-host.txt | 12 +-
.../devicetree/bindings/pci/faraday,ftpci100.txt | 70 +++++-----
.../devicetree/bindings/pci/fsl,imx6q-pcie.txt | 12 +-
.../devicetree/bindings/pci/hisilicon-pcie.txt | 26 ++--
.../devicetree/bindings/pci/host-generic-pci.txt | 12 +-
.../devicetree/bindings/pci/kirin-pcie.txt | 12 +-
.../devicetree/bindings/pci/layerscape-pci.txt | 12 +-
.../devicetree/bindings/pci/mediatek-pcie.txt | 46 ++++---
.../devicetree/bindings/pci/mobiveil-pcie.txt | 11 +-
.../devicetree/bindings/pci/pci-rcar-gen2.txt | 10 +-
.../devicetree/bindings/pci/pci-thunder-pem.txt | 12 +-
Documentation/devicetree/bindings/pci/pcie-al.txt | 6 +-
.../devicetree/bindings/pci/qcom,pcie.txt | 26 ++--
.../devicetree/bindings/pci/ralink,rt3883-pci.txt | 20 +--
.../devicetree/bindings/pci/rockchip-pcie-host.txt | 12 +-
Documentation/devicetree/bindings/pci/ti-pci.txt | 13 +-
.../devicetree/bindings/pci/uniphier-pcie.txt | 12 +-
.../devicetree/bindings/pci/v3-v360epc-pci.txt | 36 ++---
.../devicetree/bindings/pci/versatile.txt | 42 +++---
.../devicetree/bindings/pci/xgene-pci-msi.txt | 12 +-
.../devicetree/bindings/pci/xgene-pci.txt | 12 +-
.../devicetree/bindings/pci/xilinx-nwl-pcie.txt | 12 +-
.../devicetree/bindings/pci/xilinx-pcie.txt | 26 ++--
arch/arm/boot/dts/alpine.dtsi | 6 +-
arch/arm/boot/dts/artpec6.dtsi | 10 +-
arch/arm/boot/dts/gemini-dlink-dir-685.dts | 34 ++---
arch/arm/boot/dts/gemini-sl93512r.dts | 34 ++---
arch/arm/boot/dts/gemini-sq201.dts | 34 ++---
arch/arm/boot/dts/gemini-wbd111.dts | 34 ++---
arch/arm/boot/dts/gemini-wbd222.dts | 34 ++---
arch/arm/boot/dts/imx6qdl.dtsi | 10 +-
arch/arm/boot/dts/imx6sx.dtsi | 10 +-
arch/arm/boot/dts/integratorap.dts | 36 ++---
arch/arm/boot/dts/keystone-k2e.dtsi | 11 +-
arch/arm/boot/dts/keystone.dtsi | 10 +-
arch/arm/boot/dts/qcom-apq8064.dtsi | 10 +-
arch/arm/boot/dts/qcom-ipq4019.dtsi | 10 +-
arch/arm/boot/dts/versatile-pb.dts | 36 ++---
arch/arm64/boot/dts/al/alpine-v2.dtsi | 6 +-
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts | 2 +-
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts | 2 +-
arch/arm64/boot/dts/amd/amd-overdrive.dts | 2 +-
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 12 +-
arch/arm64/boot/dts/amd/husky.dts | 2 +-
arch/arm64/boot/dts/arm/fvp-base-revc.dts | 10 +-
arch/arm64/boot/dts/arm/juno-base.dtsi | 12 +-
arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi | 10 +-
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 10 +-
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 10 +-
arch/arm64/boot/dts/hisilicon/hip06.dtsi | 10 +-
arch/arm64/boot/dts/qcom/msm8998.dtsi | 10 +-
arch/arm64/boot/dts/qcom/qcs404.dtsi | 10 +-
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 10 +-
arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 11 +-
arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi | 11 +-
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 12 +-
arch/powerpc/boot/dts/bluestone.dts | 12 +-
arch/powerpc/boot/dts/charon.dts | 12 +-
arch/powerpc/boot/dts/digsy_mtc.dts | 12 +-
arch/powerpc/boot/dts/fsl/b4420qds.dts | 4 +-
arch/powerpc/boot/dts/fsl/b4420si-post.dtsi | 2 +-
arch/powerpc/boot/dts/fsl/b4860qds.dts | 4 +-
arch/powerpc/boot/dts/fsl/b4860si-post.dtsi | 2 +-
arch/powerpc/boot/dts/fsl/b4qds.dtsi | 2 +-
arch/powerpc/boot/dts/fsl/b4si-post.dtsi | 12 +-
arch/powerpc/boot/dts/fsl/bsc9132qds.dts | 2 +-
arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi | 12 +-
arch/powerpc/boot/dts/fsl/c293pcie.dts | 2 +-
arch/powerpc/boot/dts/fsl/c293si-post.dtsi | 12 +-
arch/powerpc/boot/dts/fsl/gef_sbc310.dts | 12 +-
arch/powerpc/boot/dts/fsl/mpc8536ds.dts | 12 +-
arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts | 12 +-
arch/powerpc/boot/dts/fsl/mpc8540ads.dts | 100 +++++++-------
arch/powerpc/boot/dts/fsl/mpc8544ds.dts | 22 +--
arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi | 22 +--
arch/powerpc/boot/dts/fsl/mpc8548cds_32b.dts | 14 +-
arch/powerpc/boot/dts/fsl/mpc8548cds_36b.dts | 14 +-
arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi | 12 +-
arch/powerpc/boot/dts/fsl/mpc8560ads.dts | 100 +++++++-------
arch/powerpc/boot/dts/fsl/mpc8568mds.dts | 22 +--
arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi | 12 +-
arch/powerpc/boot/dts/fsl/mpc8569mds.dts | 2 +-
arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi | 12 +-
arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts | 150 +++++++++++----------
arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts | 150 +++++++++++----------
arch/powerpc/boot/dts/fsl/p2020ds.dts | 2 +-
arch/powerpc/boot/dts/fsl/p2020ds.dtsi | 46 ++++---
arch/powerpc/boot/dts/fsl/ppa8548.dts | 2 +-
arch/powerpc/boot/dts/fsl/sbc8641d.dts | 4 +-
arch/powerpc/boot/dts/haleakala.dts | 12 +-
arch/powerpc/boot/dts/holly.dts | 42 +++---
arch/powerpc/boot/dts/hotfoot.dts | 12 +-
arch/powerpc/boot/dts/kuroboxHD.dts | 28 ++--
arch/powerpc/boot/dts/kuroboxHG.dts | 28 ++--
arch/powerpc/boot/dts/lite5200.dts | 12 +-
arch/powerpc/boot/dts/lite5200b.dts | 22 +--
arch/powerpc/boot/dts/media5200.dts | 26 ++--
arch/powerpc/boot/dts/mpc5121ads.dts | 20 +--
arch/powerpc/boot/dts/mpc8308rdb.dts | 12 +-
arch/powerpc/boot/dts/mpc8313erdb.dts | 20 +--
arch/powerpc/boot/dts/mpc832x_mds.dts | 60 +++++----
arch/powerpc/boot/dts/mpc832x_rdb.dts | 22 +--
arch/powerpc/boot/dts/mpc8349emitxgp.dts | 8 +-
arch/powerpc/boot/dts/mpc836x_mds.dts | 60 +++++----
arch/powerpc/boot/dts/mpc836x_rdk.dts | 16 ++-
arch/powerpc/boot/dts/mucmc52.dts | 12 +-
arch/powerpc/boot/dts/mvme5100.dts | 48 +++----
arch/powerpc/boot/dts/pcm030.dts | 22 +--
arch/powerpc/boot/dts/pcm032.dts | 22 +--
arch/powerpc/boot/dts/pq2fads.dts | 28 ++--
arch/powerpc/boot/dts/socrates.dts | 8 +-
arch/powerpc/boot/dts/storcenter.dts | 28 ++--
arch/powerpc/boot/dts/stx_gp3_8560.dts | 36 ++---
arch/powerpc/boot/dts/taishan.dts | 20 +--
arch/powerpc/boot/dts/tqm5200.dts | 12 +-
arch/powerpc/boot/dts/tqm8540.dts | 16 ++-
arch/powerpc/boot/dts/tqm8541.dts | 16 ++-
arch/powerpc/boot/dts/tqm8555.dts | 16 ++-
arch/powerpc/boot/dts/tqm8560.dts | 16 ++-
arch/powerpc/boot/dts/virtex440-ml510.dts | 43 +++---
arch/powerpc/boot/dts/xcalibur1501.dts | 13 +-
arch/powerpc/boot/dts/xpedite5200.dts | 8 +-
arch/xtensa/boot/dts/virt.dts | 12 +-
include/dt-bindings/interrupt-controller/irq.h | 8 ++
128 files changed, 1400 insertions(+), 1189 deletions(-)
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [GIT PULL] PCI: dt: Remove magic numbers for legacy PCI IRQ interrupts
2019-12-11 16:18 [GIT PULL] PCI: dt: Remove magic numbers for legacy PCI IRQ interrupts Andrew Murray
@ 2019-12-11 16:58 ` Olof Johansson
2019-12-11 19:33 ` Rob Herring
0 siblings, 1 reply; 4+ messages in thread
From: Olof Johansson @ 2019-12-11 16:58 UTC (permalink / raw)
To: Andrew Murray; +Cc: soc, Rob Herring, devicetree, linux-pci
On Wed, Dec 11, 2019 at 04:18:08PM +0000, Andrew Murray wrote:
> Hi Arnd,
>
> Please consider this pull request.
>
> The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a:
>
> Linux 5.5-rc1 (2019-12-08 14:57:55 -0800)
>
> are available in the Git repository at:
>
> git://linux-arm.org/linux-am.git tags/pci-dt-intx-defines-5.5-rc1
>
> for you to fetch changes up to d50e85b9ad3d4287ab3c5108b7b36ad4fd50e5b4:
>
> dt-bindings: PCI: Use IRQ flags for legacy PCI IRQ interrupts (2019-12-11 16:05:55 +0000)
>
> ----------------------------------------------------------------
> PCI: dt: Remove magic numbers for legacy PCI IRQ interrupts
>
> PCI devices can trigger interrupts via 4 physical/virtual lines known
> as INTA, INTB, INTC or INTD. Due to interrupt swizzling it is often
> required to describe the interrupt mapping in the device tree. Let's
> avoid the existing magic numbers and replace them with a #define to
> improve clarity.
>
> This is based on v5.5-rc1. As this series covers multiple architectures
> and updates include/dt-bindings it was felt that it may be more
> convenient to merge in one go.
That's a pretty high-effort way of doing this, with potential for messy
conflicts.
The standard way of making sweeping changes across the tree is usually to
get the new interface/definition added in one release, and then moving
usage over through the various maintainers in the release after since
the define is then in the base tree for everybody. Would you mind using
the same approach here, please? Especially since this is mostly a cleanup.
Thanks,
-Olof
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [GIT PULL] PCI: dt: Remove magic numbers for legacy PCI IRQ interrupts
2019-12-11 16:58 ` Olof Johansson
@ 2019-12-11 19:33 ` Rob Herring
2019-12-12 20:41 ` Andrew Murray
0 siblings, 1 reply; 4+ messages in thread
From: Rob Herring @ 2019-12-11 19:33 UTC (permalink / raw)
To: Olof Johansson; +Cc: Andrew Murray, soc, devicetree, PCI
On Wed, Dec 11, 2019 at 10:59 AM Olof Johansson <olof@lixom.net> wrote:
>
> On Wed, Dec 11, 2019 at 04:18:08PM +0000, Andrew Murray wrote:
> > Hi Arnd,
> >
> > Please consider this pull request.
> >
> > The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a:
> >
> > Linux 5.5-rc1 (2019-12-08 14:57:55 -0800)
> >
> > are available in the Git repository at:
> >
> > git://linux-arm.org/linux-am.git tags/pci-dt-intx-defines-5.5-rc1
> >
> > for you to fetch changes up to d50e85b9ad3d4287ab3c5108b7b36ad4fd50e5b4:
> >
> > dt-bindings: PCI: Use IRQ flags for legacy PCI IRQ interrupts (2019-12-11 16:05:55 +0000)
> >
> > ----------------------------------------------------------------
> > PCI: dt: Remove magic numbers for legacy PCI IRQ interrupts
> >
> > PCI devices can trigger interrupts via 4 physical/virtual lines known
> > as INTA, INTB, INTC or INTD. Due to interrupt swizzling it is often
> > required to describe the interrupt mapping in the device tree. Let's
> > avoid the existing magic numbers and replace them with a #define to
> > improve clarity.
> >
> > This is based on v5.5-rc1. As this series covers multiple architectures
> > and updates include/dt-bindings it was felt that it may be more
> > convenient to merge in one go.
>
> That's a pretty high-effort way of doing this, with potential for messy
> conflicts.
>
> The standard way of making sweeping changes across the tree is usually to
> get the new interface/definition added in one release, and then moving
> usage over through the various maintainers in the release after since
> the define is then in the base tree for everybody. Would you mind using
> the same approach here, please? Especially since this is mostly a cleanup.
Yeah, it's already going to conflict with some PCI controller schema
conversions pending.
I'm happy to apply the header for 5.5-rc2. Then send the dts changes
to Arnd/Olof and the binding changes to Lorenzo.
Rob
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [GIT PULL] PCI: dt: Remove magic numbers for legacy PCI IRQ interrupts
2019-12-11 19:33 ` Rob Herring
@ 2019-12-12 20:41 ` Andrew Murray
0 siblings, 0 replies; 4+ messages in thread
From: Andrew Murray @ 2019-12-12 20:41 UTC (permalink / raw)
To: Rob Herring; +Cc: Olof Johansson, soc, devicetree, PCI
On Wed, Dec 11, 2019 at 01:33:37PM -0600, Rob Herring wrote:
> On Wed, Dec 11, 2019 at 10:59 AM Olof Johansson <olof@lixom.net> wrote:
> >
> > On Wed, Dec 11, 2019 at 04:18:08PM +0000, Andrew Murray wrote:
> > > Hi Arnd,
> > >
> > > Please consider this pull request.
> > >
> > > The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a:
> > >
> > > Linux 5.5-rc1 (2019-12-08 14:57:55 -0800)
> > >
> > > are available in the Git repository at:
> > >
> > > git://linux-arm.org/linux-am.git tags/pci-dt-intx-defines-5.5-rc1
> > >
> > > for you to fetch changes up to d50e85b9ad3d4287ab3c5108b7b36ad4fd50e5b4:
> > >
> > > dt-bindings: PCI: Use IRQ flags for legacy PCI IRQ interrupts (2019-12-11 16:05:55 +0000)
> > >
> > > ----------------------------------------------------------------
> > > PCI: dt: Remove magic numbers for legacy PCI IRQ interrupts
> > >
> > > PCI devices can trigger interrupts via 4 physical/virtual lines known
> > > as INTA, INTB, INTC or INTD. Due to interrupt swizzling it is often
> > > required to describe the interrupt mapping in the device tree. Let's
> > > avoid the existing magic numbers and replace them with a #define to
> > > improve clarity.
> > >
> > > This is based on v5.5-rc1. As this series covers multiple architectures
> > > and updates include/dt-bindings it was felt that it may be more
> > > convenient to merge in one go.
> >
> > That's a pretty high-effort way of doing this, with potential for messy
> > conflicts.
> >
> > The standard way of making sweeping changes across the tree is usually to
> > get the new interface/definition added in one release, and then moving
> > usage over through the various maintainers in the release after since
> > the define is then in the base tree for everybody. Would you mind using
OK, thanks for this - noted for next time.
> > the same approach here, please? Especially since this is mostly a cleanup.
>
> Yeah, it's already going to conflict with some PCI controller schema
> conversions pending.
>
> I'm happy to apply the header for 5.5-rc2. Then send the dts changes
> to Arnd/Olof and the binding changes to Lorenzo.
Much appreciated.
I'll rebase the dts and doc in a subsequent release.
Thanks,
Andrew Murray
>
> Rob
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-12-12 20:41 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-11 16:18 [GIT PULL] PCI: dt: Remove magic numbers for legacy PCI IRQ interrupts Andrew Murray
2019-12-11 16:58 ` Olof Johansson
2019-12-11 19:33 ` Rob Herring
2019-12-12 20:41 ` Andrew Murray
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.