* [U-Boot] [PATCH 0/2] ORIGEN Board Support
@ 2011-06-27 8:37 Chander Kashyap
2011-06-27 8:37 ` [U-Boot] [PATCH 1/2] ARMV7: Add support for Samsung ORIGEN board Chander Kashyap
2011-06-27 8:37 ` [U-Boot] [PATCH 2/2] ORIGEN: Add MMC SPL support Chander Kashyap
0 siblings, 2 replies; 7+ messages in thread
From: Chander Kashyap @ 2011-06-27 8:37 UTC (permalink / raw)
To: u-boot
Adds support for ORIGEN board with MMC Booting.
Chander Kashyap (2):
ARMV7: Add support for Samsung ORIGEN board
ORIGEN: Add MMC SPL support
MAINTAINERS | 1 +
board/samsung/origen/Makefile | 46 ++
board/samsung/origen/lowlevel_init.S | 468 +++++++++++++++++++++
board/samsung/origen/mem_setup.S | 392 +++++++++++++++++
board/samsung/origen/origen.c | 103 +++++
boards.cfg | 1 +
include/configs/origen.h | 167 ++++++++
mmc_spl/board/samsung/origen/Makefile | 105 +++++
mmc_spl/board/samsung/origen/mmc_boot.c | 75 ++++
mmc_spl/board/samsung/origen/tools/mkv310_image.c | 139 ++++++
mmc_spl/board/samsung/origen/u-boot.lds | 86 ++++
11 files changed, 1583 insertions(+), 0 deletions(-)
create mode 100644 board/samsung/origen/Makefile
create mode 100644 board/samsung/origen/lowlevel_init.S
create mode 100644 board/samsung/origen/mem_setup.S
create mode 100644 board/samsung/origen/origen.c
create mode 100644 include/configs/origen.h
create mode 100644 mmc_spl/board/samsung/origen/Makefile
create mode 100644 mmc_spl/board/samsung/origen/mmc_boot.c
create mode 100644 mmc_spl/board/samsung/origen/tools/mkv310_image.c
create mode 100644 mmc_spl/board/samsung/origen/u-boot.lds
--
1.7.4.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH 1/2] ARMV7: Add support for Samsung ORIGEN board
2011-06-27 8:37 [U-Boot] [PATCH 0/2] ORIGEN Board Support Chander Kashyap
@ 2011-06-27 8:37 ` Chander Kashyap
2011-07-06 13:32 ` Simon Glass
2011-06-27 8:37 ` [U-Boot] [PATCH 2/2] ORIGEN: Add MMC SPL support Chander Kashyap
1 sibling, 1 reply; 7+ messages in thread
From: Chander Kashyap @ 2011-06-27 8:37 UTC (permalink / raw)
To: u-boot
Origen board is based upon S5PV310 SoC which is similiar to
S5PC210 SoC.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
---
MAINTAINERS | 1 +
board/samsung/origen/Makefile | 46 ++++
board/samsung/origen/lowlevel_init.S | 468 ++++++++++++++++++++++++++++++++++
board/samsung/origen/mem_setup.S | 392 ++++++++++++++++++++++++++++
board/samsung/origen/origen.c | 103 ++++++++
boards.cfg | 1 +
include/configs/origen.h | 167 ++++++++++++
7 files changed, 1178 insertions(+), 0 deletions(-)
create mode 100644 board/samsung/origen/Makefile
create mode 100644 board/samsung/origen/lowlevel_init.S
create mode 100644 board/samsung/origen/mem_setup.S
create mode 100644 board/samsung/origen/origen.c
create mode 100644 include/configs/origen.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 30c327b..c233f82 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -707,6 +707,7 @@ Minkyu Kang <mk7.kang@samsung.com>
Chander Kashyap <k.chander@samsung.com>
SMDKV310 ARM ARMV7 (S5PC210 SoC)
+ origen ARM ARMV7 (S5PC210 SoC)
Frederik Kriewitz <frederik@kriewitz.eu>
diff --git a/board/samsung/origen/Makefile b/board/samsung/origen/Makefile
new file mode 100644
index 0000000..65eff91
--- /dev/null
+++ b/board/samsung/origen/Makefile
@@ -0,0 +1,46 @@
+#
+# Copyright (C) 2011 Samsung Electronics
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+SOBJS := mem_setup.o
+SOBJS += lowlevel_init.o
+COBJS += origen.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/origen/lowlevel_init.S b/board/samsung/origen/lowlevel_init.S
new file mode 100644
index 0000000..cbb3c45
--- /dev/null
+++ b/board/samsung/origen/lowlevel_init.S
@@ -0,0 +1,468 @@
+/*
+ * Lowlevel setup for ORIGEN board based on S5PV310
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+
+/*
+ * Register usages:
+ *
+ * r5 has zero always
+ * r7 has GPIO part1 base 0x11400000
+ * r6 has GPIO part2 base 0x11000000
+ */
+
+#define MEM_DLLl_ON
+
+_TEXT_BASE:
+ .word CONFIG_SYS_TEXT_BASE
+
+ .globl lowlevel_init
+lowlevel_init:
+ push {lr}
+
+ /* r5 has always zero */
+ mov r5, #0
+ ldr r7, =S5PC210_GPIO_PART1_BASE
+ ldr r6, =S5PC210_GPIO_PART2_BASE
+
+ /* check reset status */
+ ldr r0, =(S5PC210_POWER_BASE + 0x804) @ INFORM1
+ ldr r1, [r0]
+
+ /* AFTR wakeup reset */
+ ldr r2, =S5P_CHECK_DIDLE
+ cmp r1, r2
+ beq exit_wakeup
+
+ /* Sleep wakeup reset */
+ ldr r2, =S5P_CHECK_SLEEP
+ cmp r1, r2
+ beq wakeup_reset
+
+ /*
+ * If U-boot is already running in ram, no need to relocate U-Boot.
+ * Memory controller must be configured before relocating U-Boot
+ * in ram.
+ */
+ ldr r0, =0x0ffffff /* r0 <- Mask Bits*/
+ bic r1, pc, r0 /* pc <- current addr of code */
+ /* r1 <- unmasked bits of pc */
+ ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */
+ bic r2, r2, r0 /* r2 <- unmasked bits of r2*/
+ cmp r1, r2 /* compare r1, r2 */
+ beq 1f /* r0 == r1 then skip sdram init */
+
+ /* init system clock */
+ bl system_clock_init
+
+ /* Memory initialize */
+ bl mem_ctrl_asm_init
+
+1:
+ /* for UART */
+ bl uart_asm_init
+ bl tzpc_init
+ pop {pc}
+
+wakeup_reset:
+ bl system_clock_init
+ bl mem_ctrl_asm_init
+ bl tzpc_init
+
+exit_wakeup:
+ /* Load return address and jump to kernel */
+ ldr r0, =(S5PC210_POWER_BASE + 0x800) @ INFORM0
+
+ /* r1 = physical address of s5pc210_cpu_resume function */
+ ldr r1, [r0]
+
+ /* Jump to kernel*/
+ mov pc, r1
+ nop
+ nop
+
+/*
+ * system_clock_init: Initialize core clock and bus clock.
+ * void system_clock_init(void)
+ */
+system_clock_init:
+ push {lr}
+ ldr r0, =S5PC210_CLOCK_BASE
+
+ /* APLL(1), MPLL(1), CORE(0), HPM(0) */
+ ldr r1, =0x0101
+ ldr r2, =0x14200 @CLK_SRC_CPU
+ str r1, [r0, r2]
+
+ /* wait ?us */
+ mov r1, #0x10000
+2: subs r1, r1, #1
+ bne 2b
+
+ ldr r1, =0x00
+ ldr r2, =0x0C210 @CLK_SRC_TOP0
+ str r1, [r0, r2]
+
+ ldr r1, =0x00
+ ldr r2, =0x0C214 @CLK_SRC_TOP1_OFFSET
+ str r1, [r0, r2]
+
+ /* DMC */
+#ifdef CONFIG_EVT1
+ ldr r1, =0x10000
+#else
+ ldr r1, =0x00
+#endif
+ ldr r2, =0x10200 @CLK_SRC_DMC_OFFSET
+ str r1, [r0, r2]
+
+ /*CLK_SRC_LEFTBUS */
+ ldr r1, =0x00
+ ldr r2, =0x04200 @CLK_SRC_LEFTBUS_OFFSET
+ str r1, [r0, r2]
+
+ /*CLK_SRC_RIGHTBUS */
+ ldr r1, =0x00
+ ldr r2, =0x08200 @CLK_SRC_RIGHTBUS_OFFSET
+ str r1, [r0, r2]
+
+ /* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
+ ldr r1, =0x066666
+ ldr r2, =0x0C240 @ CLK_SRC_FSYS
+ str r1, [r0, r2]
+
+ /* UART[0:4] */
+ ldr r1, =0x0666666
+ ldr r2, =0x0C250 @CLK_SRC_PERIL0_OFFSET
+ str r1, [r0, r2]
+
+ /* wait ?us */
+ mov r1, #0x10000
+3: subs r1, r1, #1
+ bne 3b
+
+ /*
+ * CLK_DIV_CPU0:
+ *
+ * PCLK_DBG_RATIO[20] 0x1
+ * ATB_RATIO[16] 0x3
+ * PERIPH_RATIO[12] 0x3
+ * COREM1_RATIO[8] 0x7
+ * COREM0_RATIO[4] 0x3
+ */
+ ldr r1, =0x0133730
+ ldr r2, =0x14500 @CLK_DIV_CPU0_OFFSET
+ str r1, [r0, r2]
+
+ /* CLK_DIV_CPU1: COPY_RATIO [0] 0x3 */
+ ldr r1, =0x03
+ ldr r2, =0x14504 @CLK_DIV_CPU1_OFFSET
+ str r1, [r0, r2]
+
+ /*
+ * CLK_DIV_DMC0:
+ *
+ * CORE_TIMERS_RATIO[28] 0x1
+ * COPY2_RATIO[24] 0x3
+ * DMCP_RATIO[20] 0x1
+ * DMCD_RATIO[16] 0x1
+ * DMC_RATIO[12] 0x1
+ * DPHY_RATIO[8] 0x1
+ * ACP_PCLK_RATIO[4] 0x1
+ * ACP_RATIO[0] 0x3
+ */
+ ldr r1, =0x13111113
+ ldr r2, =0x010500 @CLK_DIV_DMC0_OFFSET
+ str r1, [r0, r2]
+
+ /*
+ * CLK_DIV_DMC1:
+ *
+ * DPM_RATIO[24] 0x1
+ * DVSEM_RATIO[16] 0x1
+ * PWI_RATIO[8] 0x1
+ */
+ ldr r1, =0x01010100
+ ldr r2, =0x010504 @CLK_DIV_DMC1_OFFSET
+ str r1, [r0, r2]
+
+ /*
+ * CLK_DIV_LEFRBUS:
+ *
+ * GPL_RATIO[4] 0x1
+ * GDL_RATIO[0] 0x3
+ */
+ ldr r1, =0x013
+ ldr r2, =0x04500 @CLK_DIV_LEFTBUS_OFFSET
+ str r1, [r0, r2]
+
+ /*
+ * CLK_DIV_RIGHTBUS:
+ *
+ * GPR_RATIO[4] 0x1
+ * GDR_RATIO[0] 0x3
+ */
+ ldr r1, =0x013
+ ldr r2, =0x08500 @CLK_DIV_RIGHTBUS_OFFSET
+ str r1, [r0, r2]
+
+ /*
+ * CLK_DIV_TOP:
+ *
+ * ONENAND_RATIO[16] 0x0
+ * ACLK_133_RATIO[12] 0x5
+ * ACLK_160_RATIO[8] 0x4
+ * ACLK_100_RATIO[4] 0x7
+ * ACLK_200_RATIO[0] 0x3
+ */
+ ldr r1, =0x05473
+ ldr r2, =0x0C510 @CLK_DIV_TOP_OFFSET
+ str r1, [r0, r2]
+
+ /* MMC[0:1] */
+ ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */
+ ldr r2, =0x0C544 @ CLK_DIV_FSYS1
+ str r1, [r0, r2]
+
+ /* MMC[2:3] */
+ ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */
+ ldr r2, =0x0C548 @ CLK_DIV_FSYS2
+ str r1, [r0, r2]
+
+ /* MMC4 */
+ ldr r1, =0x000f /* 800(MPLL) / (15 + 1) */
+ ldr r2, =0x0C54C @ CLK_DIV_FSYS3
+ str r1, [r0, r2]
+
+ /* wait ?us */
+ mov r1, #0x10000
+4: subs r1, r1, #1
+ bne 4b
+
+ /*
+ * CLK_DIV_PERIL0:
+ *
+ * UART5_RATIO[20] 8
+ * UART4_RATIO[16] 8
+ * UART3_RATIO[12] 8
+ * UART2_RATIO[8] 8
+ * UART1_RATIO[4] 8
+ * UART0_RATIO[0] 8
+ */
+ ldr r1, =0x774777
+ ldr r2, =0x0C550 @CLK_DIV_PERIL0_OFFSET
+ str r1, [r0, r2]
+
+ /* Set PLL locktime */
+ ldr r1, =0x01C20
+ ldr r2, =0x014000 @APLL_LOCK_OFFSET
+ str r1, [r0, r2]
+ ldr r1, =0x01C20
+ ldr r2, =0x014008 @MPLL_LOCK_OFFSET
+ str r1, [r0, r2]
+ ldr r1, =0x01C20
+ ldr r2, =0x0C010 @EPLL_LOCK_OFFSET
+ str r1, [r0, r2]
+ ldr r1, =0x01C20
+ ldr r2, =0x0C020 @VPLL_LOCK_OFFSET
+ str r1, [r0, r2]
+
+ /*
+ * APLL_CON1:
+ *
+ * APLL_AFC_ENB[31] 0x1
+ * APLL_AFC[0] 0xC
+ */
+ ldr r1, =0x8000000C
+ ldr r2, =0x014104 @APLL_CON1_OFFSET
+ str r1, [r0, r2]
+
+ /*
+ * APLL_CON0:
+ *
+ * APLL_MDIV[16] 0xFA
+ * APLL_PDIV[8] 0x6
+ * APLL_SDIV[0] 0x1
+ */
+ ldr r1, =0x80FA0601
+ ldr r2, =0x014100 @APLL_CON0_OFFSET
+ str r1, [r0, r2]
+
+ /*
+ * MPLL_CON1:
+ *
+ * MPLL_AFC_ENB[31] 0x1
+ * MPLL_AFC[0] 0x1C
+ */
+ ldr r1, =0x0000001C
+ ldr r2, =0x01410C @MPLL_CON1_OFFSET
+ str r1, [r0, r2]
+
+ /*
+ * MPLL_CON0:
+ *
+ * MPLL_MDIV[16] 0xC8
+ * MPLL_PDIV[8] 0x6
+ * MPLL_SDIV[0] 0x1
+ */
+ ldr r1, =0x80C80601
+ ldr r2, =0x014108 @MPLL_CON0_OFFSET
+ str r1, [r0, r2]
+
+ /* EPLL */
+ ldr r1, =0x0
+ ldr r2, =0x0C114 @EPLL_CON1_OFFSET
+ str r1, [r0, r2]
+
+ /*
+ * EPLL_CON0:
+ *
+ * EPLL_MDIV[16] 0x30
+ * EPLL_PDIV[8] 0x3
+ * EPLL_SDIV[0] 0x2
+ */
+ ldr r1, =0x80300302
+ ldr r2, =0x0C110 @EPLL_CON0_OFFSET
+ str r1, [r0, r2]
+
+ /*
+ * VPLL_CON1:
+ *
+ * VPLL_MRR[24] 0x11
+ * VPLL_MFR[16] 0x0
+ * VPLL_K[0] 0x400
+ */
+ ldr r1, =0x11000400
+ ldr r2, =0x0C124 @VPLL_CON1_OFFSET
+ str r1, [r0, r2]
+
+ /*
+ * VPLL_CON0:
+ *
+ * VPLL_MDIV[16] 0x35
+ * VPLL_PDIV[8] 0x3
+ * VPLL_SDIV[0] 0x2
+ */
+ ldr r1, =0x80350302
+ ldr r2, =0x0C120 @VPLL_CON0_OFFSET
+ str r1, [r0, r2]
+
+ /* wait ?us */
+ mov r1, #0x30000
+3: subs r1, r1, #1
+ bne 3b
+
+ pop {pc}
+/*
+ * uart_asm_init: Initialize UART in asm mode, 115200bps fixed.
+ * void uart_asm_init(void)
+ */
+ .globl uart_asm_init
+uart_asm_init:
+
+ /* setup UART0-UART3 GPIOs (part1) */
+ mov r0, r7
+ ldr r1, =0x22222222
+ str r1, [r0, #0x00] @ S5PC210_GPIO_A0_OFFSET
+ ldr r1, =0x00222222
+ str r1, [r0, #0x20] @ S5PC210_GPIO_A1_OFFSET
+
+ ldr r0, =S5PC210_UART_BASE
+ add r0, r0, #S5PC210_DEFAULT_UART_OFFSET
+
+ ldr r1, =0x3C5
+ str r1, [r0, #0x4]
+ ldr r1, =0x111
+ str r1, [r0, #0x8]
+ ldr r1, =0x3
+ str r1, [r0, #0x0]
+ ldr r1, =0x35
+ str r1, [r0, #0x28]
+ ldr r1, =0x4
+ str r1, [r0, #0x2c]
+
+ mov pc, lr
+ nop
+ nop
+ nop
+
+/* Setting TZPC[TrustZone Protection Controller] */
+tzpc_init:
+ ldr r0, =0x10110000
+ mov r1, #0x0
+ str r1, [r0]
+ mov r1, #0xff
+ str r1, [r0, #0x0804]
+ str r1, [r0, #0x0810]
+ str r1, [r0, #0x081C]
+ str r1, [r0, #0x0828]
+
+ ldr r0, =0x10120000
+ mov r1, #0x0
+ str r1, [r0]
+ mov r1, #0xff
+ str r1, [r0, #0x0804]
+ str r1, [r0, #0x0810]
+ str r1, [r0, #0x081C]
+ str r1, [r0, #0x0828]
+
+ ldr r0, =0x10130000
+ mov r1, #0x0
+ str r1, [r0]
+ mov r1, #0xff
+ str r1, [r0, #0x0804]
+ str r1, [r0, #0x0810]
+ str r1, [r0, #0x081C]
+ str r1, [r0, #0x0828]
+
+ ldr r0, =0x10140000
+ mov r1, #0x0
+ str r1, [r0]
+ mov r1, #0xff
+ str r1, [r0, #0x0804]
+ str r1, [r0, #0x0810]
+ str r1, [r0, #0x081C]
+ str r1, [r0, #0x0828]
+
+ ldr r0, =0x10150000
+ mov r1, #0x0
+ str r1, [r0]
+ mov r1, #0xff
+ str r1, [r0, #0x0804]
+ str r1, [r0, #0x0810]
+ str r1, [r0, #0x081C]
+ str r1, [r0, #0x0828]
+
+ ldr r0, =0x10160000
+ mov r1, #0x0
+ str r1, [r0]
+ mov r1, #0xff
+ str r1, [r0, #0x0804]
+ str r1, [r0, #0x0810]
+ str r1, [r0, #0x081C]
+ str r1, [r0, #0x0828]
+
+ mov pc, lr
diff --git a/board/samsung/origen/mem_setup.S b/board/samsung/origen/mem_setup.S
new file mode 100644
index 0000000..6b6ffc3
--- /dev/null
+++ b/board/samsung/origen/mem_setup.S
@@ -0,0 +1,392 @@
+/*
+ * Memory setup for ORIGEN board based on S5PV310
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+#define SET_MIU
+
+#define MEM_DLL
+
+#ifdef CONFIG_CLK_800_330_165
+#define DRAM_CLK_330
+#elif defined(CONFIG_CLK_1000_200_200)
+#define DRAM_CLK_200
+#elif defined(CONFIG_CLK_1000_330_165)
+#define DRAM_CLK_330
+#elif defined(CONFIG_CLK_800_400_200) || defined(CONFIG_CLK_1000_400_200)
+#define DRAM_CLK_400
+#else
+#error "CONFIG_CLK_XXX not defined"
+#endif
+
+ .globl mem_ctrl_asm_init
+mem_ctrl_asm_init:
+
+ /*
+ * Async bridge configuration at CPU_core:
+ * 1: half_sync
+ * 0: full_sync
+ */
+ ldr r0, =0x10010350
+ mov r1, #1
+ str r1, [r0]
+
+#ifdef SET_MIU
+ ldr r0, =S5PC210_MIU_BASE @0x10600000
+
+#ifdef CONFIG_EVT1
+#ifdef CONFIG_MIU_1BIT_12_INTERLEAVED
+ ldr r1, =0x0000000c
+ str r1, [r0, #0x400]
+ ldr r1, =0x00000001
+ str r1, [r0, #0xc00]
+#elif defined(CONFIG_MIU_1BIT_7_INTERLEAVED)
+ ldr r1, =0x00000007
+ str r1, [r0, #0x400]
+ ldr r1, =0x00000001
+ str r1, [r0, #0xc00]
+#elif defined(CONFIG_MIU_2BIT_21_12_INTERLEAVED)
+ ldr r1, =0x2000150c
+ str r1, [r0, #0x400]
+ ldr r1, =0x00000001
+ str r1, [r0, #0xc00]
+#elif defined(CONFIG_MIU_2BIT_21_7_INTERLEAVED)
+ ldr r1, =0x20001507
+ str r1, [r0, #0x400]
+ ldr r1, =0x00000001
+ str r1, [r0, #0xc00]
+#elif defined(CONFIG_MIU_2BIT_31_INTERLEAVED)
+ ldr r1, =0x0000001d
+ str r1, [r0, #0x400]
+ ldr r1, =0x00000001
+ str r1, [r0, #0xc00]
+#endif
+#else
+#ifdef CONFIG_MIU_1BIT_INTERLEAVED
+ ldr r1, =0x0000000c
+ str r1, [r0, #0x400] @MIU_INTLV_CONFIG
+ ldr r1, =0x40000000
+ str r1, [r0, #0x808] @MIU_INTLV_START_ADDR
+ ldr r1, =0xbfffffff
+ str r1, [r0, #0x810] @MIU_INTLV_END_ADDR
+ ldr r1, =0x00000001
+ str r1, [r0, #0x800] @MIU_MAPPING_UPDATE
+#elif defined(CONFIG_MIU_2BIT_INTERLEAVED)
+ ldr r1, =0x2000150c
+ str r1, [r0, #0x400] @MIU_INTLV_CONFIG
+ ldr r1, =0x40000000
+ str r1, [r0, #0x808] @MIU_INTLV_START_ADDR
+ ldr r1, =0xbfffffff
+ str r1, [r0, #0x810] @MIU_INTLV_END_ADDR
+ ldr r1, =0x00000001
+ str r1, [r0, #0x800] @MIU_MAPPING_UPDATE
+#elif defined(CONFIG_MIU_LINEAR)
+ ldr r1, =0x40000000
+ str r1, [r0, #0x818] @MIU_SINGLE_MAPPING0_START_ADDR
+ ldr r1, =0x7fffffff
+ str r1, [r0, #0x820] @MIU_SINGLE_MAPPING0_END_ADDR
+ ldr r1, =0x80000000
+ str r1, [r0, #0x828] @MIU_SINGLE_MAPPING1_START_ADDR
+ ldr r1, =0xbfffffff
+ str r1, [r0, #0x830] @MIU_SINGLE_MAPPING1_END_ADDR]
+ ldr r1, =0x00000006
+ str r1, [r0, #0x800] @MIU_MAPPING_UPDATE
+#endif
+#endif
+#endif
+ /* DREX0 */
+ ldr r0, =S5PC210_DMC0_BASE @0x10400000
+
+ ldr r1, =0xe0000086
+ str r1, [r0, #0x1C] @DMC_PHYCONTROL1
+
+ ldr r1, =0xE3855703
+ str r1, [r0, #0x44] @DMC_PHYZQCONTROL
+
+ mov r2, #0x100000
+1: subs r2, r2, #1
+ bne 1b
+
+ ldr r1, =0xe000008e
+ str r1, [r0, #0x1C] @DMC_PHYCONTROL1
+ ldr r1, =0xe0000086
+ str r1, [r0, #0x1C] @DMC_PHYCONTROL1
+
+ ldr r1, =0x71101008
+ str r1, [r0, #0x18] @DMC_PHYCONTROL0
+ ldr r1, =0x7110100A
+ str r1, [r0, #0x18] @DMC_PHYCONTROL0
+ ldr r1, =0xe0000086
+ str r1, [r0, #0x1C] @DMC_PHYCONTROL1
+ ldr r1, =0x7110100B
+ str r1, [r0, #0x18] @DMC_PHYCONTROL0
+
+ ldr r1, =0x00000000
+ str r1, [r0, #0x20] @DMC_PHYCONTROL2
+
+ ldr r1, =0x0FFF301a
+ str r1, [r0, #0x00] @DMC_CONCONTROL
+ ldr r1, =0x00312640
+ str r1, [r0, #0x04] @DMC_MEMCONTROL]
+
+#ifdef CONFIG_MIU_LINEAR
+ ldr r1, =0x40e01323
+ str r1, [r0, #0x08] @DMC_MEMCONFIG0
+ ldr r1, =0x60e01323
+ str r1, [r0, #0x0C] @DMC_MEMCONFIG1
+#else /* @MIU_1BIT_INTERLEAVED | MIU_2BIT_INTERLEAVED */
+ ldr r1, =0x20e01323
+ str r1, [r0, #0x08] @DMC_MEMCONFIG0
+ ldr r1, =0x40e01323
+ str r1, [r0, #0x0C] @DMC_MEMCONFIG1
+#endif
+
+ ldr r1, =0xff000000
+ str r1, [r0, #0x14] @DMC_PRECHCONFIG
+
+ ldr r1, =0x000000BB
+ str r1, [r0, #0x30] @DMC_TIMINGAREF
+
+#ifdef DRAM_CLK_330
+ ldr r1, =0x3545548d
+ str r1, [r0, #0x34] @DMC_TIMINGROW
+ ldr r1, =0x45430506
+ str r1, [r0, #0x38] @DMC_TIMINGDATA
+ ldr r1, =0x46000A3C
+ str r1, [r0, #0x3C] @DMC_TIMINGPOWER
+#endif
+#ifdef DRAM_CLK_400
+ ldr r1, =0x4046654f
+ str r1, [r0, #0x34] @DMC_TIMINGROW
+ ldr r1, =0x46400506
+ str r1, [r0, #0x38] @DMC_TIMINGDATA
+ ldr r1, =0x52000A3C
+ str r1, [r0, #0x3C] @DMC_TIMINGPOWER
+#endif
+ ldr r1, =0x07000000
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+
+ mov r2, #0x100000
+2: subs r2, r2, #1
+ bne 2b
+
+ ldr r1, =0x00020000
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+ ldr r1, =0x00030000
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+ ldr r1, =0x00010002
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+ ldr r1, =0x00000328
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+
+ mov r2, #0x100000
+3: subs r2, r2, #1
+ bne 3b
+
+ ldr r1, =0x0a000000
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+
+ mov r2, #0x100000
+4: subs r2, r2, #1
+ bne 4b
+
+ ldr r1, =0x07100000
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+
+ mov r2, #0x100000
+5: subs r2, r2, #1
+ bne 5b
+
+ ldr r1, =0x00120000
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+ ldr r1, =0x00130000
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+ ldr r1, =0x00110002
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+ ldr r1, =0x00100328
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+
+ mov r2, #0x100000
+6: subs r2, r2, #1
+ bne 6b
+
+ ldr r1, =0x0a100000
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+
+ mov r2, #0x100000
+7: subs r2, r2, #1
+ bne 7b
+
+ ldr r1, =0xe000008e
+ str r1, [r0, #0x1C] @DMC_PHYCONTROL1
+ ldr r1, =0xe0000086
+ str r1, [r0, #0x1C] @DMC_PHYCONTROL1
+
+ mov r2, #0x100000
+8: subs r2, r2, #1
+ bne 8b
+
+ /* DREX1 */
+ ldr r0, =S5PC210_DMC1_BASE @0x10410000
+
+ ldr r1, =0xe0000086
+ str r1, [r0, #0x1C] @DMC_PHYCONTROL1
+
+ ldr r1, =0xE3855703
+ str r1, [r0, #0x44] @DMC_PHYZQCONTROL
+
+ mov r2, #0x100000
+1: subs r2, r2, #1
+ bne 1b
+
+ ldr r1, =0xe000008e
+ str r1, [r0, #0x1C] @DMC_PHYCONTROL1
+ ldr r1, =0xe0000086
+ str r1, [r0, #0x1C] @DMC_PHYCONTROL1
+
+ ldr r1, =0x71101008
+ str r1, [r0, #0x18] @DMC_PHYCONTROL0
+ ldr r1, =0x7110100A
+ str r1, [r0, #0x18] @DMC_PHYCONTROL0
+ ldr r1, =0xe0000086
+ str r1, [r0, #0x1C] @DMC_PHYCONTROL1
+ ldr r1, =0x7110100B
+ str r1, [r0, #0x18] @DMC_PHYCONTROL0
+
+ ldr r1, =0x00000000
+ str r1, [r0, #0x20] @DMC_PHYCONTROL2
+
+ ldr r1, =0x0FFF301a
+ str r1, [r0, #0x00] @DMC_CONCONTROL
+ ldr r1, =0x00312640
+ str r1, [r0, #0x04] @DMC_MEMCONTROL]
+
+#ifdef CONFIG_MIU_LINEAR
+ ldr r1, =0x40e01323
+ str r1, [r0, #0x08] @DMC_MEMCONFIG0
+ ldr r1, =0x60e01323
+ str r1, [r0, #0x0C] @DMC_MEMCONFIG1
+#else /* @MIU_1BIT_INTERLEAVED | MIU_2BIT_INTERLEAVED */
+ ldr r1, =0x20e01323
+ str r1, [r0, #0x08] @DMC_MEMCONFIG0
+ ldr r1, =0x40e01323
+ str r1, [r0, #0x0C] @DMC_MEMCONFIG1
+#endif
+
+ ldr r1, =0xff000000
+ str r1, [r0, #0x14] @DMC_PRECHCONFIG
+
+ ldr r1, =0x000000BB
+ str r1, [r0, #0x30] @DMC_TIMINGAREF
+
+#ifdef DRAM_CLK_330
+ ldr r1, =0x3545548d
+ str r1, [r0, #0x34] @DMC_TIMINGROW
+ ldr r1, =0x45430506
+ str r1, [r0, #0x38] @DMC_TIMINGDATA
+ ldr r1, =0x46000A3C
+ str r1, [r0, #0x3C] @DMC_TIMINGPOWER
+#endif
+#ifdef DRAM_CLK_400
+ ldr r1, =0x4046654f
+ str r1, [r0, #0x34] @DMC_TIMINGROW
+ ldr r1, =0x46400506
+ str r1, [r0, #0x38] @DMC_TIMINGDATA
+ ldr r1, =0x52000A3C
+ str r1, [r0, #0x3C] @DMC_TIMINGPOWER
+#endif
+
+ ldr r1, =0x07000000
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+
+ mov r2, #0x100000
+2: subs r2, r2, #1
+ bne 2b
+
+ ldr r1, =0x00020000
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+ ldr r1, =0x00030000
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+ ldr r1, =0x00010002
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+ ldr r1, =0x00000328
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+
+ mov r2, #0x100000
+3: subs r2, r2, #1
+ bne 3b
+
+ ldr r1, =0x0a000000
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+
+ mov r2, #0x100000
+4: subs r2, r2, #1
+ bne 4b
+
+ ldr r1, =0x07100000
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+
+ mov r2, #0x100000
+5: subs r2, r2, #1
+ bne 5b
+
+ ldr r1, =0x00120000
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+ ldr r1, =0x00130000
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+ ldr r1, =0x00110002
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+ ldr r1, =0x00100328
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+
+ mov r2, #0x100000
+6: subs r2, r2, #1
+ bne 6b
+
+ ldr r1, =0x0a100000
+ str r1, [r0, #0x10] @DMC_DIRECTCMD
+
+ mov r2, #0x100000
+7: subs r2, r2, #1
+ bne 7b
+
+ ldr r1, =0xe000008e
+ str r1, [r0, #0x1C] @DMC_PHYCONTROL1
+ ldr r1, =0xe0000086
+ str r1, [r0, #0x1C] @DMC_PHYCONTROL1
+
+ mov r2, #0x100000
+8: subs r2, r2, #1
+ bne 8b
+
+ /* turn on DREX0, DREX1 */
+ ldr r0, =0x10400000 @APB_DMC_0_BASE
+ ldr r1, =0x0FFF303a
+ str r1, [r0, #0x00] @DMC_CONCONTROL
+
+ ldr r0, =0x10410000 @APB_DMC_1_BASE
+ ldr r1, =0x0FFF303a
+ str r1, [r0, #0x00] @DMC_CONCONTROL
+
+ mov pc, lr
diff --git a/board/samsung/origen/origen.c b/board/samsung/origen/origen.c
new file mode 100644
index 0000000..84e1415
--- /dev/null
+++ b/board/samsung/origen/origen.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+struct s5pc210_gpio_part1 *gpio1;
+struct s5pc210_gpio_part2 *gpio2;
+
+int board_init(void)
+{
+ gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
+ gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
+
+ gd->bd->bi_arch_number = MACH_TYPE_ORIGEN;
+ gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE \
+ + PHYS_SDRAM_3_SIZE + PHYS_SDRAM_4_SIZE;
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+ gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
+ gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
+ gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
+ gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ printf("\nBoard: ORIGEN\n");
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ int i, err;
+
+ /*
+ * MMC2 SD card GPIO:
+ *
+ * GPK2[0] SD_2_CLK(2)
+ * GPK2[1] SD_2_CMD(2)
+ * GPK2[2] SD_2_CDn
+ * GPK2[3:6] SD_2_DATA[0:3](2)
+ */
+ for (i = 0; i < 7; i++) {
+ /* GPK2[0:6] special function 2 */
+ gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2));
+
+ /* GPK2[0:6] drv 4x */
+ gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
+
+ /* GPK2[0:1] pull disable */
+ if (i == 0 || i == 1) {
+ gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
+ continue;
+ }
+
+ /* GPK2[2:6] pull up */
+ gpio_set_pull(&gpio2->k2, i, GPIO_PULL_UP);
+ }
+
+ err = s5p_mmc_init(2, 4);
+ return err;
+}
+#endif
diff --git a/boards.cfg b/boards.cfg
index ced8788..7c492b6 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -152,6 +152,7 @@ s5p_goni arm armv7 goni samsung
smdkc100 arm armv7 smdkc100 samsung s5pc1xx
s5pc210_universal arm armv7 universal_c210 samsung s5pc2xx
smdkv310 arm armv7 smdkv310 samsung s5pc2xx
+origen arm armv7 origen samsung s5pc2xx
harmony arm armv7 harmony nvidia tegra2
seaboard arm armv7 seaboard nvidia tegra2
actux1 arm ixp
diff --git a/include/configs/origen.h b/include/configs/origen.h
new file mode 100644
index 0000000..6fa488a
--- /dev/null
+++ b/include/configs/origen.h
@@ -0,0 +1,167 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG ORIGEN (S5PV310) board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_ARMV7 1 /*This is an ARM V7 CPU core */
+#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */
+#define CONFIG_S5P 1 /* S5P Family */
+#define CONFIG_S5PC210 1 /* which is in a S5PC210 SoC */
+#define CONFIG_ORIGEN 1 /* working with ORIGEN*/
+#define CONFIG_EVT1 1 /* EVT1 */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_L2_OFF 1
+
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CONFIG_SYS_TEXT_BASE 0x43E00000
+
+/* input clock of PLL: ORIGEN has 24MHz input clock */
+#define CONFIG_SYS_CLK_FREQ 24000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+
+#define MACH_TYPE_ORIGEN 3455
+
+#define S5P_CHECK_SLEEP 0x00000BAD
+#define S5P_CHECK_DIDLE 0xBAD00000
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
+
+/* select serial console configuration */
+#define CONFIG_SERIAL_MULTI 1
+#define CONFIG_SERIAL2 1 /* use SERIAL 1 */
+#define CONFIG_BAUDRATE 115200
+#define S5PC210_DEFAULT_UART_OFFSET 0x020000
+
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC 1
+#define CONFIG_MMC 1
+#define CONFIG_S5P_MMC 1
+
+/* PWM */
+#define CONFIG_PWM 1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Command definition*/
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_MMC_U_BOOT
+
+#define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT "ORIGEN # "
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/
+#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
+
+#define CONFIG_SYS_HZ 1000
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* Stack sizes */
+#define CONFIG_STACKSIZE (256 << 10) /* 256KB */
+
+/* ORIGEN has 4 bank of DRAM */
+#define CONFIG_NR_DRAM_BANKS 4
+#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
+#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
+#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
+#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH 1
+#undef CONFIG_CMD_IMLS
+#define CONFIG_IDENT_STRING " for ORIGEN"
+
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+#define CONFIG_CLK_1000_400_200
+
+/* MIU (Memory Interleaving Unit) */
+#ifdef CONFIG_EVT1
+#define CONFIG_MIU_2BIT_21_7_INTERLEAVED
+#else
+#define CONFIG_MIU_2BIT_INTERLEAVED
+#endif
+
+#define CONFIG_ENV_IS_IN_MMC 1
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
+#define RESERVE_BLOCK_SIZE (512)
+#define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
+#define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE)
+#define CONFIG_DOS_PARTITION 1
+
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE)
+
+/* U-boot copy size from boot Media to DRAM.*/
+#define COPY_BL2_SIZE 0x80000
+#define BL2_START_OFFSET ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512)
+#define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE/512)
+#endif /* __CONFIG_H */
--
1.7.4.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH 2/2] ORIGEN: Add MMC SPL support
2011-06-27 8:37 [U-Boot] [PATCH 0/2] ORIGEN Board Support Chander Kashyap
2011-06-27 8:37 ` [U-Boot] [PATCH 1/2] ARMV7: Add support for Samsung ORIGEN board Chander Kashyap
@ 2011-06-27 8:37 ` Chander Kashyap
2011-07-12 6:07 ` Minkyu Kang
1 sibling, 1 reply; 7+ messages in thread
From: Chander Kashyap @ 2011-06-27 8:37 UTC (permalink / raw)
To: u-boot
Adds mmc boot support.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
---
mmc_spl/board/samsung/origen/Makefile | 105 ++++++++++++++++
mmc_spl/board/samsung/origen/mmc_boot.c | 75 +++++++++++
mmc_spl/board/samsung/origen/tools/mkv310_image.c | 139 +++++++++++++++++++++
mmc_spl/board/samsung/origen/u-boot.lds | 86 +++++++++++++
4 files changed, 405 insertions(+), 0 deletions(-)
create mode 100644 mmc_spl/board/samsung/origen/Makefile
create mode 100644 mmc_spl/board/samsung/origen/mmc_boot.c
create mode 100644 mmc_spl/board/samsung/origen/tools/mkv310_image.c
create mode 100644 mmc_spl/board/samsung/origen/u-boot.lds
diff --git a/mmc_spl/board/samsung/origen/Makefile b/mmc_spl/board/samsung/origen/Makefile
new file mode 100644
index 0000000..7b62684
--- /dev/null
+++ b/mmc_spl/board/samsung/origen/Makefile
@@ -0,0 +1,105 @@
+#
+# (C) Copyright 2006-2007
+# Stefan Roese, DENX Software Engineering, sr at denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+#
+# (C) Copyright 2011
+# Chander Kashyap, Samsung Electronics, <k.chander@samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+CONFIG_MMC_SPL = y
+
+include $(TOPDIR)/config.mk
+
+LDSCRIPT= $(TOPDIR)/mmc_spl/board/$(BOARDDIR)/u-boot.lds
+LDFLAGS = -Bstatic -T $(mmcobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS += -DCONFIG_MMC_SPL
+CFLAGS += -DCONFIG_MMC_SPL
+CFLAGS += -DCONFIG_PRELOADER
+
+SOBJS = start.o mem_setup.o lowlevel_init.o
+COBJS = mmc_boot.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(OBJTREE)/mmc_spl/board/$(BOARDDIR)
+
+mmcobj := $(OBJTREE)/mmc_spl/
+
+
+MKV310_MMC_SPL_EXEC = mkv310_mmc_spl_exec
+MMC_SPL_BIN = u-boot-mmc-spl.bin
+
+ALL = $(mmcobj)u-boot-spl $(mmcobj)u-boot-spl.bin $(mmcobj)$(MMC_SPL_BIN)
+
+all: $(obj).depend $(ALL)
+
+$(mmcobj)$(MMC_SPL_BIN): $(mmcobj)u-boot-spl.bin tools/$(MKV310_MMC_SPL_EXEC)
+ ./tools/$(MKV310_MMC_SPL_EXEC) $(mmcobj)u-boot-spl.bin $(mmcobj)$(MMC_SPL_BIN)
+ rm -f tools/$(MKV310_MMC_SPL_EXEC)
+
+tools/$(MKV310_MMC_SPL_EXEC): tools/mkv310_image.c
+ $(HOSTCC) tools/mkv310_image.c -o tools/$(MKV310_MMC_SPL_EXEC)
+
+$(mmcobj)u-boot-spl.bin: $(mmcobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(mmcobj)u-boot-spl: $(OBJS) $(mmcobj)u-boot.lds
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
+ -Map $(mmcobj)u-boot-spl.map \
+ -o $(mmcobj)u-boot-spl
+
+$(mmcobj)u-boot.lds: $(LDSCRIPT)
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+
+# create symbolic links for common files
+
+# from cpu directory
+start.S:
+ @rm -f $@
+ @ln -s $(TOPDIR)/arch/arm/cpu/armv7/start.S $@
+
+# from board directory
+mem_setup.S:
+ @rm -f $@
+ @ln -s $(TOPDIR)/board/samsung/origen/mem_setup.S $@
+
+lowlevel_init.S:
+ @rm -f $@
+ @ln -s $(TOPDIR)/board/samsung/origen/lowlevel_init.S $@
+
+#########################################################################
+
+$(obj)%.o: %.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: %.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/mmc_spl/board/samsung/origen/mmc_boot.c b/mmc_spl/board/samsung/origen/mmc_boot.c
new file mode 100644
index 0000000..459d27d
--- /dev/null
+++ b/mmc_spl/board/samsung/origen/mmc_boot.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include<common.h>
+#include<config.h>
+
+typedef u32(*copy_sd_mmc_to_mem) \
+ (u32 start_block, u32 block_count, u32 *dest_addr);
+
+
+void copy_uboot_to_ram(void)
+{
+#ifdef CONFIG_EVT1
+ copy_sd_mmc_to_mem copy_bl2 = (copy_sd_mmc_to_mem)*(u32 *)(0x02020030);
+#else
+ copy_sd_mmc_to_mem copy_bl2 = (copy_sd_mmc_to_mem)(0x00002488);
+#endif
+ copy_bl2(BL2_START_OFFSET,\
+ BL2_SIZE_BLOC_COUNT, (u32 *)CONFIG_SYS_TEXT_BASE);
+}
+
+void board_init_f(unsigned long bootflag)
+{
+ __attribute__((noreturn)) void (*uboot)(void);
+ copy_uboot_to_ram();
+
+ /* Jump to U-Boot image */
+ uboot = (void *)CONFIG_SYS_TEXT_BASE;
+ (*uboot)();
+ /* Never returns Here */
+}
+
+/* Place Holders */
+void board_init_r(gd_t *id, ulong dest_addr)
+{
+ /* Function attribute is no-return */
+ /* This Function never executes */
+ while (1)
+ ;
+}
+
+void do_undefined_instruction(struct pt_regs *pt_regs) {}
+
+void do_software_interrupt(struct pt_regs *pt_regs) {}
+
+void do_prefetch_abort(struct pt_regs *pt_regs) {}
+
+void do_data_abort(struct pt_regs *pt_regs) {}
+
+void do_not_used(struct pt_regs *pt_regs) {}
+
+void do_fiq(struct pt_regs *pt_regs) {}
+
+#ifndef CONFIG_USE_IRQ
+void do_irq(struct pt_regs *pt_regs) {}
+#endif
diff --git a/mmc_spl/board/samsung/origen/tools/mkv310_image.c b/mmc_spl/board/samsung/origen/tools/mkv310_image.c
new file mode 100644
index 0000000..51f16f2
--- /dev/null
+++ b/mmc_spl/board/samsung/origen/tools/mkv310_image.c
@@ -0,0 +1,139 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <string.h>
+
+#define BUFSIZE (16*1024)
+#define IMG_SIZE (16*1024)
+#define HEADER_SIZE 16
+#define FILE_PERM (S_IRUSR | S_IWUSR | S_IRGRP \
+ | S_IWGRP | S_IROTH | S_IWOTH)
+/*
+* Requirement:
+* IROM code reads first 14K bytes from boot device.
+* It then calculates the checksum of 14K-4 bytes and compare with data at
+* 14K-4 offset.
+*
+* This function takes two filenames:
+* IN "u-boot-spl.bin" and
+* OUT "u-boot-mmc-spl.bin" as filenames.
+* It reads the "u-boot-spl.bin" in 16K buffer.
+* It calculates checksum of 14K-4 Bytes and stores at 14K-4 offset in buffer.
+* It writes the buffer to "u-boot-mmc-spl.bin" file.
+*/
+
+int main(int argc, char **argv)
+{
+ int i, len;
+ unsigned char buffer[BUFSIZE] = {0};
+ int ifd, ofd;
+ unsigned int checksum = 0, count;
+
+ if (argc != 3) {
+ printf(" %d Wrong number of arguments\n", argc);
+ exit(EXIT_FAILURE);
+ }
+
+ ifd = open(argv[1], O_RDONLY);
+ if (ifd < 0) {
+ fprintf(stderr, "%s: Can't open %s: %s\n",
+ argv[0], argv[1], strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ ofd = open(argv[2], O_WRONLY | O_CREAT | O_TRUNC, FILE_PERM);
+ if (ifd < 0) {
+ fprintf(stderr, "%s: Can't open %s: %s\n",
+ argv[0], argv[2], strerror(errno));
+ if (ifd)
+ close(ifd);
+ exit(EXIT_FAILURE);
+ }
+
+ len = lseek(ifd, 0, SEEK_END);
+ lseek(ifd, 0, SEEK_SET);
+
+ count = (len < (IMG_SIZE - HEADER_SIZE))
+ ? len : (IMG_SIZE - HEADER_SIZE);
+
+ if (read(ifd, buffer + HEADER_SIZE, count) != count) {
+ fprintf(stderr, "%s: Can't read %s: %s\n",
+ argv[0], argv[1], strerror(errno));
+
+ if (ifd)
+ close(ifd);
+ if (ofd)
+ close(ofd);
+
+ exit(EXIT_FAILURE);
+ }
+
+ for (i = 0; i < IMG_SIZE - HEADER_SIZE; i++)
+ checksum += buffer[i+16];
+
+ *(ulong *)buffer = 0x1f;
+ *(ulong *)(buffer+4) = checksum;
+
+ buffer[0] ^= 0x53;
+ buffer[1] ^= 0x35;
+ buffer[2] ^= 0x50;
+ buffer[3] ^= 0x43;
+ buffer[4] ^= 0x32;
+ buffer[5] ^= 0x31;
+ buffer[6] ^= 0x30;
+ buffer[7] ^= 0x20;
+ buffer[8] ^= 0x48;
+ buffer[9] ^= 0x45;
+ buffer[10] ^= 0x41;
+ buffer[11] ^= 0x44;
+ buffer[12] ^= 0x45;
+ buffer[13] ^= 0x52;
+ buffer[14] ^= 0x20;
+ buffer[15] ^= 0x20;
+
+ for (i = 1; i < HEADER_SIZE; i++)
+ buffer[i] ^= buffer[i-1];
+
+ if (write(ofd, buffer, BUFSIZE) != BUFSIZE) {
+ fprintf(stderr, "%s: Can't write %s: %s\n",
+ argv[0], argv[2], strerror(errno));
+
+ if (ifd)
+ close(ifd);
+ if (ofd)
+ close(ofd);
+
+ exit(EXIT_FAILURE);
+ }
+
+ if (ifd)
+ close(ifd);
+ if (ofd)
+ close(ofd);
+
+ return EXIT_SUCCESS;
+}
diff --git a/mmc_spl/board/samsung/origen/u-boot.lds b/mmc_spl/board/samsung/origen/u-boot.lds
new file mode 100644
index 0000000..61cd16a
--- /dev/null
+++ b/mmc_spl/board/samsung/origen/u-boot.lds
@@ -0,0 +1,86 @@
+/*
+ * (C) Copyright 2011
+ * Chander Kashyap, Samsung Electronics, <k.chander@samsung.com>
+ *
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : {
+ *(.data)
+ }
+
+ . = ALIGN(4);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ _end = .;
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+}
--
1.7.4.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH 1/2] ARMV7: Add support for Samsung ORIGEN board
2011-06-27 8:37 ` [U-Boot] [PATCH 1/2] ARMV7: Add support for Samsung ORIGEN board Chander Kashyap
@ 2011-07-06 13:32 ` Simon Glass
2011-07-06 14:16 ` [U-Boot] [Samsung] " Angus Ainslie
0 siblings, 1 reply; 7+ messages in thread
From: Simon Glass @ 2011-07-06 13:32 UTC (permalink / raw)
To: u-boot
Hi Chander,
On Mon, Jun 27, 2011 at 1:37 AM, Chander Kashyap <chander.kashyap@linaro.org
> wrote:
> Origen board is based upon S5PV310 SoC which is similiar to
> S5PC210 SoC.
>
> Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
> ---
> MAINTAINERS | 1 +
> board/samsung/origen/Makefile | 46 ++++
> board/samsung/origen/lowlevel_init.S | 468
> ++++++++++++++++++++++++++++++++++
> board/samsung/origen/mem_setup.S | 392 ++++++++++++++++++++++++++++
> board/samsung/origen/origen.c | 103 ++++++++
> boards.cfg | 1 +
> include/configs/origen.h | 167 ++++++++++++
> 7 files changed, 1178 insertions(+), 0 deletions(-)
> create mode 100644 board/samsung/origen/Makefile
> create mode 100644 board/samsung/origen/lowlevel_init.S
> create mode 100644 board/samsung/origen/mem_setup.S
> create mode 100644 board/samsung/origen/origen.c
> create mode 100644 include/configs/origen.h
>
> There is a lot of assembler in this patch. I wonder if it would make sense
to use C for more of this?
Regards,
Simon
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [Samsung] [PATCH 1/2] ARMV7: Add support for Samsung ORIGEN board
2011-07-06 13:32 ` Simon Glass
@ 2011-07-06 14:16 ` Angus Ainslie
0 siblings, 0 replies; 7+ messages in thread
From: Angus Ainslie @ 2011-07-06 14:16 UTC (permalink / raw)
To: u-boot
Hi Simon,
On Wed, Jul 6, 2011 at 7:32 AM, Simon Glass <sjg@chromium.org> wrote:
> Hi Chander,
>
> On Mon, Jun 27, 2011 at 1:37 AM, Chander Kashyap
> <chander.kashyap@linaro.org> wrote:
>>
>> Origen board is based upon S5PV310 SoC which is similiar to
>> S5PC210 SoC.
>>
>> Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
>> ---
>> ?MAINTAINERS ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?1 +
>> ?board/samsung/origen/Makefile ? ? ? ?| ? 46 ++++
>> ?board/samsung/origen/lowlevel_init.S | ?468
>> ++++++++++++++++++++++++++++++++++
>> ?board/samsung/origen/mem_setup.S ? ? | ?392 ++++++++++++++++++++++++++++
>> ?board/samsung/origen/origen.c ? ? ? ?| ?103 ++++++++
>> ?boards.cfg ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?1 +
>> ?include/configs/origen.h ? ? ? ? ? ? | ?167 ++++++++++++
>> ?7 files changed, 1178 insertions(+), 0 deletions(-)
>> ?create mode 100644 board/samsung/origen/Makefile
>> ?create mode 100644 board/samsung/origen/lowlevel_init.S
>> ?create mode 100644 board/samsung/origen/mem_setup.S
>> ?create mode 100644 board/samsung/origen/origen.c
>> ?create mode 100644 include/configs/origen.h
>>
> There is a lot of assembler in this patch. I wonder if it would make sense
> to use C for more of this?
The size of the SPL is restricted so that was the reason that assembly
was used.
> Regards,
> Simon
>
Cheers
Angus
--
Angus Ainslie <angus.ainslie@linaro.org>
Team Lead, Samsung Landing Team
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH 2/2] ORIGEN: Add MMC SPL support
2011-06-27 8:37 ` [U-Boot] [PATCH 2/2] ORIGEN: Add MMC SPL support Chander Kashyap
@ 2011-07-12 6:07 ` Minkyu Kang
2011-07-12 7:22 ` Chander Kashyap
0 siblings, 1 reply; 7+ messages in thread
From: Minkyu Kang @ 2011-07-12 6:07 UTC (permalink / raw)
To: u-boot
Dear Chander Kashyap ,
On 27 June 2011 17:37, Chander Kashyap <chander.kashyap@linaro.org> wrote:
> Adds mmc boot support.
>
> Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
> ---
> ?mmc_spl/board/samsung/origen/Makefile ? ? ? ? ? ? | ?105 ++++++++++++++++
> ?mmc_spl/board/samsung/origen/mmc_boot.c ? ? ? ? ? | ? 75 +++++++++++
> ?mmc_spl/board/samsung/origen/tools/mkv310_image.c | ?139 +++++++++++++++++++++
> ?mmc_spl/board/samsung/origen/u-boot.lds ? ? ? ? ? | ? 86 +++++++++++++
> ?4 files changed, 405 insertions(+), 0 deletions(-)
> ?create mode 100644 mmc_spl/board/samsung/origen/Makefile
> ?create mode 100644 mmc_spl/board/samsung/origen/mmc_boot.c
> ?create mode 100644 mmc_spl/board/samsung/origen/tools/mkv310_image.c
> ?create mode 100644 mmc_spl/board/samsung/origen/u-boot.lds
>
> diff --git a/mmc_spl/board/samsung/origen/tools/mkv310_image.c b/mmc_spl/board/samsung/origen/tools/mkv310_image.c
> new file mode 100644
> index 0000000..51f16f2
> --- /dev/null
> +++ b/mmc_spl/board/samsung/origen/tools/mkv310_image.c
> @@ -0,0 +1,139 @@
> +/*
> + * Copyright (C) 2011 Samsung Electronics
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <unistd.h>
> +#include <fcntl.h>
> +#include <errno.h>
> +#include <string.h>
please apply Dirk Behme's patch here.
http://patchwork.ozlabs.org/patch/104270/
> +
> +#define BUFSIZE ? ? ? ? ? ? ? ? ? ? ? ?(16*1024)
> +#define IMG_SIZE ? ? ? ? ? ? ? (16*1024)
> +#define HEADER_SIZE ? ? ? ? ? ?16
> +#define FILE_PERM ? ? ? ? ? ? ?(S_IRUSR | S_IWUSR | S_IRGRP \
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | S_IWGRP | S_IROTH | S_IWOTH)
> +/*
> +* Requirement:
> +* IROM code reads first 14K bytes from boot device.
> +* It then calculates the checksum of 14K-4 bytes and compare with data at
> +* 14K-4 offset.
> +*
> +* This function takes two filenames:
> +* IN ?"u-boot-spl.bin" and
> +* OUT "u-boot-mmc-spl.bin" as filenames.
> +* It reads the "u-boot-spl.bin" in 16K buffer.
> +* It calculates checksum of 14K-4 Bytes and stores at 14K-4 offset in buffer.
> +* It writes the buffer to "u-boot-mmc-spl.bin" file.
> +*/
> +
Thanks
Minkyu Kang
--
from. prom.
www.promsoft.net
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH 2/2] ORIGEN: Add MMC SPL support
2011-07-12 6:07 ` Minkyu Kang
@ 2011-07-12 7:22 ` Chander Kashyap
0 siblings, 0 replies; 7+ messages in thread
From: Chander Kashyap @ 2011-07-12 7:22 UTC (permalink / raw)
To: u-boot
On 12 July 2011 11:37, Minkyu Kang <promsoft@gmail.com> wrote:
> Dear Chander Kashyap ,
>
> On 27 June 2011 17:37, Chander Kashyap <chander.kashyap@linaro.org> wrote:
>> Adds mmc boot support.
>>
>> Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
>> ---
>> ?mmc_spl/board/samsung/origen/Makefile ? ? ? ? ? ? | ?105 ++++++++++++++++
>> ?mmc_spl/board/samsung/origen/mmc_boot.c ? ? ? ? ? | ? 75 +++++++++++
>> ?mmc_spl/board/samsung/origen/tools/mkv310_image.c | ?139 +++++++++++++++++++++
>> ?mmc_spl/board/samsung/origen/u-boot.lds ? ? ? ? ? | ? 86 +++++++++++++
>> ?4 files changed, 405 insertions(+), 0 deletions(-)
>> ?create mode 100644 mmc_spl/board/samsung/origen/Makefile
>> ?create mode 100644 mmc_spl/board/samsung/origen/mmc_boot.c
>> ?create mode 100644 mmc_spl/board/samsung/origen/tools/mkv310_image.c
>> ?create mode 100644 mmc_spl/board/samsung/origen/u-boot.lds
>>
>> diff --git a/mmc_spl/board/samsung/origen/tools/mkv310_image.c b/mmc_spl/board/samsung/origen/tools/mkv310_image.c
>> new file mode 100644
>> index 0000000..51f16f2
>> --- /dev/null
>> +++ b/mmc_spl/board/samsung/origen/tools/mkv310_image.c
>> @@ -0,0 +1,139 @@
>> +/*
>> + * Copyright (C) 2011 Samsung Electronics
>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + */
>> +
>> +#include <stdio.h>
>> +#include <stdlib.h>
>> +#include <unistd.h>
>> +#include <fcntl.h>
>> +#include <errno.h>
>> +#include <string.h>
>
> please apply Dirk Behme's patch here.
> http://patchwork.ozlabs.org/patch/104270/
done
>
>> +
>> +#define BUFSIZE ? ? ? ? ? ? ? ? ? ? ? ?(16*1024)
>> +#define IMG_SIZE ? ? ? ? ? ? ? (16*1024)
>> +#define HEADER_SIZE ? ? ? ? ? ?16
>> +#define FILE_PERM ? ? ? ? ? ? ?(S_IRUSR | S_IWUSR | S_IRGRP \
>> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | S_IWGRP | S_IROTH | S_IWOTH)
>> +/*
>> +* Requirement:
>> +* IROM code reads first 14K bytes from boot device.
>> +* It then calculates the checksum of 14K-4 bytes and compare with data at
>> +* 14K-4 offset.
>> +*
>> +* This function takes two filenames:
>> +* IN ?"u-boot-spl.bin" and
>> +* OUT "u-boot-mmc-spl.bin" as filenames.
>> +* It reads the "u-boot-spl.bin" in 16K buffer.
>> +* It calculates checksum of 14K-4 Bytes and stores at 14K-4 offset in buffer.
>> +* It writes the buffer to "u-boot-mmc-spl.bin" file.
>> +*/
>> +
>
> Thanks
> Minkyu Kang
> --
> from. prom.
> www.promsoft.net
>
--
with warm regards,
Chander Kashyap
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-07-12 7:22 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-06-27 8:37 [U-Boot] [PATCH 0/2] ORIGEN Board Support Chander Kashyap
2011-06-27 8:37 ` [U-Boot] [PATCH 1/2] ARMV7: Add support for Samsung ORIGEN board Chander Kashyap
2011-07-06 13:32 ` Simon Glass
2011-07-06 14:16 ` [U-Boot] [Samsung] " Angus Ainslie
2011-06-27 8:37 ` [U-Boot] [PATCH 2/2] ORIGEN: Add MMC SPL support Chander Kashyap
2011-07-12 6:07 ` Minkyu Kang
2011-07-12 7:22 ` Chander Kashyap
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.