* open embedded build issues with beagle board
@ 2014-07-08 6:54 Bryan
2014-07-08 14:47 ` Cliff Brake
2014-07-08 16:11 ` Philip Balister
0 siblings, 2 replies; 12+ messages in thread
From: Bryan @ 2014-07-08 6:54 UTC (permalink / raw)
To: openembedded-devel
Hi All
I am trying to build Openembeeded classic for Beagle board-XM but i am
getting lot of broken link issues. I have set DISTRO as angstrom-2010.x in
local.conf. Is this approach ok? or should i move to openembedded core ??
Pls suggest.
Broken link e.g.
Resolving www.angstrom-distribution.org (www.angstrom-distribution.org)...
140.211.169.177
Connecting to www.angstrom-distribution.org
(www.angstrom-distribution.org)|140.211.169.177|:80...
connected.
HTTP request sent, awaiting response...
404 Not Found 2014-07-08 10:13:43 ERROR 404: Not Found.
Thanks in advance
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: open embedded build issues with beagle board
2014-07-08 6:54 open embedded build issues with beagle board Bryan
@ 2014-07-08 14:47 ` Cliff Brake
2014-07-08 16:11 ` Philip Balister
1 sibling, 0 replies; 12+ messages in thread
From: Cliff Brake @ 2014-07-08 14:47 UTC (permalink / raw)
To: openembedded-devel
On Tue, Jul 8, 2014 at 2:54 AM, Bryan <just4tech83@gmail.com> wrote:
> Hi All
> I am trying to build Openembeeded classic for Beagle board-XM but i am
> getting lot of broken link issues. I have set DISTRO as angstrom-2010.x in
> local.conf. Is this approach ok? or should i move to openembedded core ??
> Pls suggest.
Yes, openembedded-core (angstrom or poky) is your best bet. oe
classic is seeing very little maintenance these days.
Cliff
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: open embedded build issues with beagle board
2014-07-08 6:54 open embedded build issues with beagle board Bryan
2014-07-08 14:47 ` Cliff Brake
@ 2014-07-08 16:11 ` Philip Balister
2014-07-11 6:00 ` Bryan
1 sibling, 1 reply; 12+ messages in thread
From: Philip Balister @ 2014-07-08 16:11 UTC (permalink / raw)
To: openembedded-devel
On 07/08/2014 02:54 AM, Bryan wrote:
> Hi All
> I am trying to build Openembeeded classic for Beagle board-XM but i am
> getting lot of broken link issues. I have set DISTRO as angstrom-2010.x in
> local.conf. Is this approach ok? or should i move to openembedded core ??
> Pls suggest.
Use the current Angstrom instructions, oe-classic is pretty much
completely unsupported now.
Philip
>
> Broken link e.g.
>
> Resolving www.angstrom-distribution.org (www.angstrom-distribution.org)...
> 140.211.169.177
> Connecting to www.angstrom-distribution.org
> (www.angstrom-distribution.org)|140.211.169.177|:80...
> connected.
> HTTP request sent, awaiting response...
> 404 Not Found 2014-07-08 10:13:43 ERROR 404: Not Found.
>
> Thanks in advance
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: open embedded build issues with beagle board
2014-07-08 16:11 ` Philip Balister
@ 2014-07-11 6:00 ` Bryan
2014-07-11 13:11 ` Cliff Brake
2014-07-15 4:29 ` Bryan
0 siblings, 2 replies; 12+ messages in thread
From: Bryan @ 2014-07-11 6:00 UTC (permalink / raw)
To: philip, cbrake, openembedded-devel
Hi,
As per your suggestion we took oe-core and other packages from
followinf link:
-> http://git.openembedded.org/meta-openembedded
We are using bitbake version 1.23.1.
We have to build image for beagleboard so we find following to build image:
->
http://www.crashcourse.ca/wiki/index.php/Building_for_BBB_using_OpenEmbedded
While following steps from the above link we have done following settings
in local.conf and bblayers.conf file.
MACHINE ??= "beaglebone"
BBLAYERS ?= " \
/home/rpjday/oe/dist/layers/oe-core/meta \
/home/rpjday/oe/dist/layers/meta-openembedded/meta-oe \
/home/rpjday/oe/dist/layers/meta-beagleboard/common-bsp \
"
Now while running "bitbake core-image-minimal" command we are getting
following issues :
chown: changing ownership of
`/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/intro_what.html':
Operation not permitted
chown: changing ownership of
`/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/program_ram.html':
Operation not permitted
chown: changing ownership of
`/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/arch_apis.html':
Operation not permitted
chown: changing ownership of
`/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/transapp_reclimit.html':
Operation not permitted
chown: changing ownership of
`/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/am_close.html':
Operation not permitted
chown: changing ownership of
`/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/lock_stdmode.html':
Operation not permitted
chown: changing ownership of
`/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/transapp_env_open.html':
Operation not permitted
WARNING:
/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/temp/run.do_install.26236:1
exit 1 from
chown -R root:root
/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image
ERROR: Function failed: do_install (log file is located at
/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/temp/log.do_install.26236)
one more doubt about the code base which we should follow as we found one
other link which have oe-core code at "https://github.com/openembedded". We
have tried both and found seperate issues while using both.
Please suggest us how we can overcome these issues to get test image build
for beagleboard.
Thanks in advance
---------- Forwarded message ----------
From: "Philip Balister" <philip@balister.org>
Date: Jul 8, 2014 9:42 PM
Subject: Re: [oe] open embedded build issues with beagle board
To: <openembedded-devel@lists.openembedded.org>
Cc:
On 07/08/2014 02:54 AM, Bryan wrote:
> Hi All
> I am trying to build Openembeeded classic for Beagle board-XM but i am
> getting lot of broken link issues. I have set DISTRO as angstrom-2010.x
in
> local.conf. Is this approach ok? or should i move to openembedded core
??
> Pls suggest.
Use the current Angstrom instructions, oe-classic is pretty much
completely unsupported now.
Philip
>
> Broken link e.g.
>
> Resolving www.angstrom-distribution.org (www.angstrom-distribution.org)...
> 140.211.169.177
> Connecting to www.angstrom-distribution.org
> (www.angstrom-distribution.org)|140.211.169.177|:80...
> connected.
> HTTP request sent, awaiting response...
> 404 Not Found 2014-07-08 10:13:43 ERROR 404: Not Found.
>
> Thanks in advance
>
--
_______________________________________________
Openembedded-devel mailing list
Openembedded-devel@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-devel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: open embedded build issues with beagle board
2014-07-11 6:00 ` Bryan
@ 2014-07-11 13:11 ` Cliff Brake
2014-07-15 4:29 ` Bryan
1 sibling, 0 replies; 12+ messages in thread
From: Cliff Brake @ 2014-07-11 13:11 UTC (permalink / raw)
To: openembedded-devel
On Fri, Jul 11, 2014 at 2:00 AM, Bryan <just4tech83@gmail.com> wrote:
> Hi,
> As per your suggestion we took oe-core and other packages from
> followinf link:
> -> http://git.openembedded.org/meta-openembedded
>
> We are using bitbake version 1.23.1.
>
> We have to build image for beagleboard so we find following to build image:
>
> ->
> http://www.crashcourse.ca/wiki/index.php/Building_for_BBB_using_OpenEmbedded
I have never used exactly the method you described, so I can't comment
on it. I would advise you to use standard OE distro (Angstrom or
Poky), and stick with the dora or daisy releases. There are a number
of ways to do this:
https://github.com/Angstrom-distribution/setup-scripts (use the
anstrom-v2012.06-yocto1.6 branch)
https://github.com/cbrake/oe-build (use the bec1.5-dora branch)
http://git.yoctoproject.org/cgit/cgit.cgi/poky/ (perhaps try daisy branch)
Cliff
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: open embedded build issues with beagle board
2014-07-11 6:00 ` Bryan
2014-07-11 13:11 ` Cliff Brake
@ 2014-07-15 4:29 ` Bryan
2014-07-15 6:04 ` Stephen Arnold
[not found] ` <53C51AE2.4030100@bec-systems.com>
1 sibling, 2 replies; 12+ messages in thread
From: Bryan @ 2014-07-15 4:29 UTC (permalink / raw)
To: cbrake, philip, openembedded-devel
Hi Cliff,
thanks for your suggestion, i tried links which you mentioned in
your mail. Now i am able to build minimal image for MACHINE = qmux6.
Can you please tell us how can we make it for beagleboard omap 3530.
Where can we find support layer for beagleboard.
Thanks a lot in advance !
On Jul 11, 2014 11:30 AM, "Bryan" <just4tech83@gmail.com> wrote:
> Hi,
> As per your suggestion we took oe-core and other packages from
> followinf link:
> -> http://git.openembedded.org/meta-openembedded
>
> We are using bitbake version 1.23.1.
>
> We have to build image for beagleboard so we find following to build image:
>
> ->
> http://www.crashcourse.ca/wiki/index.php/Building_for_BBB_using_OpenEmbedded
>
> While following steps from the above link we have done following settings
> in local.conf and bblayers.conf file.
>
> MACHINE ??= "beaglebone"
> BBLAYERS ?= " \
> /home/rpjday/oe/dist/layers/oe-core/meta \
> /home/rpjday/oe/dist/layers/meta-openembedded/meta-oe \
> /home/rpjday/oe/dist/layers/meta-beagleboard/common-bsp \
> "
> Now while running "bitbake core-image-minimal" command we are getting
> following issues :
>
> chown: changing ownership of
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/intro_what.html':
> Operation not permitted
> chown: changing ownership of
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/program_ram.html':
> Operation not permitted
> chown: changing ownership of
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/arch_apis.html':
> Operation not permitted
> chown: changing ownership of
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/transapp_reclimit.html':
> Operation not permitted
> chown: changing ownership of
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/am_close.html':
> Operation not permitted
> chown: changing ownership of
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/lock_stdmode.html':
> Operation not permitted
> chown: changing ownership of
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/transapp_env_open.html':
> Operation not permitted
>
> WARNING:
> /home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/temp/run.do_install.26236:1
> exit 1 from
> chown -R root:root
> /home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image
> ERROR: Function failed: do_install (log file is located at
> /home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/temp/log.do_install.26236)
>
> one more doubt about the code base which we should follow as we found one
> other link which have oe-core code at "https://github.com/openembedded".
> We have tried both and found seperate issues while using both.
>
> Please suggest us how we can overcome these issues to get test image build
> for beagleboard.
>
> Thanks in advance
> ---------- Forwarded message ----------
> From: "Philip Balister" <philip@balister.org>
> Date: Jul 8, 2014 9:42 PM
> Subject: Re: [oe] open embedded build issues with beagle board
> To: <openembedded-devel@lists.openembedded.org>
> Cc:
>
> On 07/08/2014 02:54 AM, Bryan wrote:
> > Hi All
> > I am trying to build Openembeeded classic for Beagle board-XM but i am
> > getting lot of broken link issues. I have set DISTRO as angstrom-2010.x
> in
> > local.conf. Is this approach ok? or should i move to openembedded
> core ??
> > Pls suggest.
>
> Use the current Angstrom instructions, oe-classic is pretty much
> completely unsupported now.
>
> Philip
>
> >
> > Broken link e.g.
> >
> > Resolving www.angstrom-distribution.org (www.angstrom-distribution.org
> )...
> > 140.211.169.177
> > Connecting to www.angstrom-distribution.org
> > (www.angstrom-distribution.org)|140.211.169.177|:80...
> > connected.
> > HTTP request sent, awaiting response...
> > 404 Not Found 2014-07-08 10:13:43 ERROR 404: Not Found.
> >
> > Thanks in advance
> >
> --
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: open embedded build issues with beagle board
2014-07-15 4:29 ` Bryan
@ 2014-07-15 6:04 ` Stephen Arnold
[not found] ` <53C51AE2.4030100@bec-systems.com>
1 sibling, 0 replies; 12+ messages in thread
From: Stephen Arnold @ 2014-07-15 6:04 UTC (permalink / raw)
To: openembeded-devel
Just add meta-ti to your bblayers and set your machine. The latest kernel
*should* support video; there's also the LinuxOnArm wiki with a working
kernel.
Steve
On Mon, Jul 14, 2014 at 9:29 PM, Bryan <just4tech83@gmail.com> wrote:
> Hi Cliff,
> thanks for your suggestion, i tried links which you mentioned in
> your mail. Now i am able to build minimal image for MACHINE = qmux6.
> Can you please tell us how can we make it for beagleboard omap 3530.
> Where can we find support layer for beagleboard.
>
> Thanks a lot in advance !
> On Jul 11, 2014 11:30 AM, "Bryan" <just4tech83@gmail.com> wrote:
>
> > Hi,
> > As per your suggestion we took oe-core and other packages from
> > followinf link:
> > -> http://git.openembedded.org/meta-openembedded
> >
> > We are using bitbake version 1.23.1.
> >
> > We have to build image for beagleboard so we find following to build
> image:
> >
> > ->
> >
> http://www.crashcourse.ca/wiki/index.php/Building_for_BBB_using_OpenEmbedded
> >
> > While following steps from the above link we have done following settings
> > in local.conf and bblayers.conf file.
> >
> > MACHINE ??= "beaglebone"
> > BBLAYERS ?= " \
> > /home/rpjday/oe/dist/layers/oe-core/meta \
> > /home/rpjday/oe/dist/layers/meta-openembedded/meta-oe \
> > /home/rpjday/oe/dist/layers/meta-beagleboard/common-bsp \
> > "
> > Now while running "bitbake core-image-minimal" command we are getting
> > following issues :
> >
> > chown: changing ownership of
> >
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/intro_what.html':
> > Operation not permitted
> > chown: changing ownership of
> >
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/program_ram.html':
> > Operation not permitted
> > chown: changing ownership of
> >
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/arch_apis.html':
> > Operation not permitted
> > chown: changing ownership of
> >
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/transapp_reclimit.html':
> > Operation not permitted
> > chown: changing ownership of
> >
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/am_close.html':
> > Operation not permitted
> > chown: changing ownership of
> >
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/lock_stdmode.html':
> > Operation not permitted
> > chown: changing ownership of
> >
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/transapp_env_open.html':
> > Operation not permitted
> >
> > WARNING:
> >
> /home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/temp/run.do_install.26236:1
> > exit 1 from
> > chown -R root:root
> >
> /home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image
> > ERROR: Function failed: do_install (log file is located at
> >
> /home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/temp/log.do_install.26236)
> >
> > one more doubt about the code base which we should follow as we found one
> > other link which have oe-core code at "https://github.com/openembedded".
> > We have tried both and found seperate issues while using both.
> >
> > Please suggest us how we can overcome these issues to get test image
> build
> > for beagleboard.
> >
> > Thanks in advance
> > ---------- Forwarded message ----------
> > From: "Philip Balister" <philip@balister.org>
> > Date: Jul 8, 2014 9:42 PM
> > Subject: Re: [oe] open embedded build issues with beagle board
> > To: <openembedded-devel@lists.openembedded.org>
> > Cc:
> >
> > On 07/08/2014 02:54 AM, Bryan wrote:
> > > Hi All
> > > I am trying to build Openembeeded classic for Beagle board-XM but i
> am
> > > getting lot of broken link issues. I have set DISTRO as
> angstrom-2010.x
> > in
> > > local.conf. Is this approach ok? or should i move to openembedded
> > core ??
> > > Pls suggest.
> >
> > Use the current Angstrom instructions, oe-classic is pretty much
> > completely unsupported now.
> >
> > Philip
> >
> > >
> > > Broken link e.g.
> > >
> > > Resolving www.angstrom-distribution.org (www.angstrom-distribution.org
> > )...
> > > 140.211.169.177
> > > Connecting to www.angstrom-distribution.org
> > > (www.angstrom-distribution.org)|140.211.169.177|:80...
> > > connected.
> > > HTTP request sent, awaiting response...
> > > 404 Not Found 2014-07-08 10:13:43 ERROR 404: Not Found.
> > >
> > > Thanks in advance
> > >
> > --
> > _______________________________________________
> > Openembedded-devel mailing list
> > Openembedded-devel@lists.openembedded.org
> > http://lists.openembedded.org/mailman/listinfo/openembedded-devel
> >
> --
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: open embedded build issues with beagle board
[not found] ` <CAD2C2VR22ww51=1UQbW7OxtWvr8dV1PjLhr0d0O176JtX6PJKQ@mail.gmail.com>
@ 2014-07-17 6:59 ` Bryan
2014-07-17 7:05 ` Henning Heinold
2014-07-22 10:15 ` Bryan
1 sibling, 1 reply; 12+ messages in thread
From: Bryan @ 2014-07-17 6:59 UTC (permalink / raw)
To: openembedded-devel
---------- Forwarded message ----------
From: "Bryan" <just4tech83@gmail.com>
Date: Jul 17, 2014 10:36 AM
Subject: Re: Fwd: Re: [oe] open embedded build issues with beagle board
To: "Cliff Brake" <cbrake@bec-systems.com>, <philip@balister.org>, <
openembedded-devel@lidts.openembedded.org>
Cc:
Hi,
Thanks for your suggestion to use meta-ti layer. Cau you please tell us
where we can find this layer as we couldn't find it on openembedded git.
We tried with following link to build but it gives error while building.
https://github.com/beagleboard/meta-beagleboard
Thanks
Bryan
On Jul 15, 2014 5:43 PM, "Cliff Brake" <cbrake@bec-systems.com> wrote:
> The meta-ti layer includes support for the beagleboard. You probably
> want the linux-mainline 3.2 recipe.
>
> Cliff
>
> On 07/15/2014 12:29 AM, Bryan wrote:
>
> Hi Cliff,
> thanks for your suggestion, i tried links which you mentioned in
> your mail. Now i am able to build minimal image for MACHINE = qmux6.
> Can you please tell us how can we make it for beagleboard omap 3530.
> Where can we find support layer for beagleboard.
>
> Thanks a lot in advance !
> On Jul 11, 2014 11:30 AM, "Bryan" <just4tech83@gmail.com> wrote:
>
>> Hi,
>> As per your suggestion we took oe-core and other packages from
>> followinf link:
>> -> http://git.openembedded.org/meta-openembedded
>>
>> We are using bitbake version 1.23.1.
>>
>> We have to build image for beagleboard so we find following to build
>> image:
>>
>> ->
>> http://www.crashcourse.ca/wiki/index.php/Building_for_BBB_using_OpenEmbedded
>>
>> While following steps from the above link we have done following settings
>> in local.conf and bblayers.conf file.
>>
>> MACHINE ??= "beaglebone"
>> BBLAYERS ?= " \
>> /home/rpjday/oe/dist/layers/oe-core/meta \
>> /home/rpjday/oe/dist/layers/meta-openembedded/meta-oe \
>> /home/rpjday/oe/dist/layers/meta-beagleboard/common-bsp \
>> "
>> Now while running "bitbake core-image-minimal" command we are getting
>> following issues :
>>
>> chown: changing ownership of
>> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/intro_what.html':
>> Operation not permitted
>> chown: changing ownership of
>> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/program_ram.html':
>> Operation not permitted
>> chown: changing ownership of
>> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/arch_apis.html':
>> Operation not permitted
>> chown: changing ownership of
>> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/transapp_reclimit.html':
>> Operation not permitted
>> chown: changing ownership of
>> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/am_close.html':
>> Operation not permitted
>> chown: changing ownership of
>> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/lock_stdmode.html':
>> Operation not permitted
>> chown: changing ownership of
>> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/transapp_env_open.html':
>> Operation not permitted
>>
>> WARNING:
>> /home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/temp/run.do_install.26236:1
>> exit 1 from
>> chown -R root:root
>> /home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image
>> ERROR: Function failed: do_install (log file is located at
>> /home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/temp/log.do_install.26236)
>>
>> one more doubt about the code base which we should follow as we found one
>> other link which have oe-core code at "https://github.com/openembedded".
>> We have tried both and found seperate issues while using both.
>>
>> Please suggest us how we can overcome these issues to get test image
>> build for beagleboard.
>>
>> Thanks in advance
>> ---------- Forwarded message ----------
>> From: "Philip Balister" <philip@balister.org>
>> Date: Jul 8, 2014 9:42 PM
>> Subject: Re: [oe] open embedded build issues with beagle board
>> To: <openembedded-devel@lists.openembedded.org>
>> Cc:
>>
>> On 07/08/2014 02:54 AM, Bryan wrote:
>> > Hi All
>> > I am trying to build Openembeeded classic for Beagle board-XM but i am
>> > getting lot of broken link issues. I have set DISTRO as
>> angstrom-2010.x in
>> > local.conf. Is this approach ok? or should i move to openembedded
>> core ??
>> > Pls suggest.
>>
>> Use the current Angstrom instructions, oe-classic is pretty much
>> completely unsupported now.
>>
>> Philip
>>
>> >
>> > Broken link e.g.
>> >
>> > Resolving www.angstrom-distribution.org (www.angstrom-distribution.org
>> )...
>> > 140.211.169.177
>> > Connecting to www.angstrom-distribution.org
>> > (www.angstrom-distribution.org)|140.211.169.177|:80...
>> > connected.
>> > HTTP request sent, awaiting response...
>> > 404 Not Found 2014-07-08 10:13:43 ERROR 404: Not Found.
>> >
>> > Thanks in advance
>> >
>> --
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel@lists.openembedded.org
>> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
>>
>
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: open embedded build issues with beagle board
2014-07-17 6:59 ` Bryan
@ 2014-07-17 7:05 ` Henning Heinold
2014-07-17 7:14 ` Stephen Arnold
0 siblings, 1 reply; 12+ messages in thread
From: Henning Heinold @ 2014-07-17 7:05 UTC (permalink / raw)
To: openembedded-devel
On Thu, Jul 17, 2014 at 12:29:34PM +0530, Bryan wrote:
> ---------- Forwarded message ----------
> Hi,
> Thanks for your suggestion to use meta-ti layer. Cau you please tell us
> where we can find this layer as we couldn't find it on openembedded git.
>
> We tried with following link to build but it gives error while building.
> https://github.com/beagleboard/meta-beagleboard
>
>
> Thanks
> Bryan
Have a look at http://layers.openembedded.org/layerindex/branch/master/layers/
Bye Henning
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: open embedded build issues with beagle board
2014-07-17 7:05 ` Henning Heinold
@ 2014-07-17 7:14 ` Stephen Arnold
0 siblings, 0 replies; 12+ messages in thread
From: Stephen Arnold @ 2014-07-17 7:14 UTC (permalink / raw)
To: openembeded-devel
Yes, check the layer index. I have a patched meta-beagleboard on github,
with an older kernel, but meta-beagleboard is not as current as meta-ti
(and not quite as "official" I believe). The latest kernel works
reasonably well (the patches maintained by RCN) if you want to check the
LinuxOnArm wiki.
Steve
On Thu, Jul 17, 2014 at 12:05 AM, Henning Heinold <
henning@itconsulting-heinold.de> wrote:
> On Thu, Jul 17, 2014 at 12:29:34PM +0530, Bryan wrote:
> > ---------- Forwarded message ----------
> > Hi,
> > Thanks for your suggestion to use meta-ti layer. Cau you please tell
> us
> > where we can find this layer as we couldn't find it on openembedded git.
> >
> > We tried with following link to build but it gives error while building.
> > https://github.com/beagleboard/meta-beagleboard
> >
> >
> > Thanks
> > Bryan
>
> Have a look at
> http://layers.openembedded.org/layerindex/branch/master/layers/
>
>
> Bye Henning
> --
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: open embedded build issues with beagle board
[not found] ` <CAD2C2VR22ww51=1UQbW7OxtWvr8dV1PjLhr0d0O176JtX6PJKQ@mail.gmail.com>
2014-07-17 6:59 ` Bryan
@ 2014-07-22 10:15 ` Bryan
2014-07-23 1:10 ` Stephen Arnold
1 sibling, 1 reply; 12+ messages in thread
From: Bryan @ 2014-07-22 10:15 UTC (permalink / raw)
To: philip, Cliff Brake, openembedded-devel
Please suggest me link to get meta layer for beagkeboard.
On Jul 17, 2014 10:36 AM, "Bryan" <just4tech83@gmail.com> wrote:
>
> Hi,
> Thanks for your suggestion to use meta-ti layer. Cau you please tell us
> where we can find this layer as we couldn't find it on openembedded git.
>
> We tried with following link to build but it gives error while building.
> https://github.com/beagleboard/meta-beagleboard
>
>
> Thanks
> Bryan
> On Jul 15, 2014 5:43 PM, "Cliff Brake" <cbrake@bec-systems.com> wrote:
>
>> The meta-ti layer includes support for the beagleboard. You probably
>> want the linux-mainline 3.2 recipe.
>>
>> Cliff
>>
>> On 07/15/2014 12:29 AM, Bryan wrote:
>>
>> Hi Cliff,
>> thanks for your suggestion, i tried links which you mentioned in
>> your mail. Now i am able to build minimal image for MACHINE = qmux6.
>> Can you please tell us how can we make it for beagleboard omap 3530.
>> Where can we find support layer for beagleboard.
>>
>> Thanks a lot in advance !
>> On Jul 11, 2014 11:30 AM, "Bryan" <just4tech83@gmail.com> wrote:
>>
>>> Hi,
>>> As per your suggestion we took oe-core and other packages from
>>> followinf link:
>>> -> http://git.openembedded.org/meta-openembedded
>>>
>>> We are using bitbake version 1.23.1.
>>>
>>> We have to build image for beagleboard so we find following to build
>>> image:
>>>
>>> ->
>>> http://www.crashcourse.ca/wiki/index.php/Building_for_BBB_using_OpenEmbedded
>>>
>>> While following steps from the above link we have done following
>>> settings in local.conf and bblayers.conf file.
>>>
>>> MACHINE ??= "beaglebone"
>>> BBLAYERS ?= " \
>>> /home/rpjday/oe/dist/layers/oe-core/meta \
>>> /home/rpjday/oe/dist/layers/meta-openembedded/meta-oe \
>>> /home/rpjday/oe/dist/layers/meta-beagleboard/common-bsp \
>>> "
>>> Now while running "bitbake core-image-minimal" command we are getting
>>> following issues :
>>>
>>> chown: changing ownership of
>>> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/intro_what.html':
>>> Operation not permitted
>>> chown: changing ownership of
>>> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/program_ram.html':
>>> Operation not permitted
>>> chown: changing ownership of
>>> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/arch_apis.html':
>>> Operation not permitted
>>> chown: changing ownership of
>>> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/transapp_reclimit.html':
>>> Operation not permitted
>>> chown: changing ownership of
>>> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/am_close.html':
>>> Operation not permitted
>>> chown: changing ownership of
>>> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/lock_stdmode.html':
>>> Operation not permitted
>>> chown: changing ownership of
>>> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/transapp_env_open.html':
>>> Operation not permitted
>>>
>>> WARNING:
>>> /home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/temp/run.do_install.26236:1
>>> exit 1 from
>>> chown -R root:root
>>> /home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image
>>> ERROR: Function failed: do_install (log file is located at
>>> /home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/temp/log.do_install.26236)
>>>
>>> one more doubt about the code base which we should follow as we found
>>> one other link which have oe-core code at "
>>> https://github.com/openembedded". We have tried both and found seperate
>>> issues while using both.
>>>
>>> Please suggest us how we can overcome these issues to get test image
>>> build for beagleboard.
>>>
>>> Thanks in advance
>>> ---------- Forwarded message ----------
>>> From: "Philip Balister" <philip@balister.org>
>>> Date: Jul 8, 2014 9:42 PM
>>> Subject: Re: [oe] open embedded build issues with beagle board
>>> To: <openembedded-devel@lists.openembedded.org>
>>> Cc:
>>>
>>> On 07/08/2014 02:54 AM, Bryan wrote:
>>> > Hi All
>>> > I am trying to build Openembeeded classic for Beagle board-XM but i
>>> am
>>> > getting lot of broken link issues. I have set DISTRO as
>>> angstrom-2010.x in
>>> > local.conf. Is this approach ok? or should i move to openembedded
>>> core ??
>>> > Pls suggest.
>>>
>>> Use the current Angstrom instructions, oe-classic is pretty much
>>> completely unsupported now.
>>>
>>> Philip
>>>
>>> >
>>> > Broken link e.g.
>>> >
>>> > Resolving www.angstrom-distribution.org (www.angstrom-distribution.org
>>> )...
>>> > 140.211.169.177
>>> > Connecting to www.angstrom-distribution.org
>>> > (www.angstrom-distribution.org)|140.211.169.177|:80...
>>> > connected.
>>> > HTTP request sent, awaiting response...
>>> > 404 Not Found 2014-07-08 10:13:43 ERROR 404: Not Found.
>>> >
>>> > Thanks in advance
>>> >
>>> --
>>> _______________________________________________
>>> Openembedded-devel mailing list
>>> Openembedded-devel@lists.openembedded.org
>>> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
>>>
>>
>>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: open embedded build issues with beagle board
2014-07-22 10:15 ` Bryan
@ 2014-07-23 1:10 ` Stephen Arnold
0 siblings, 0 replies; 12+ messages in thread
From: Stephen Arnold @ 2014-07-23 1:10 UTC (permalink / raw)
To: openembeded-devel
It's in the layer index, which will point to the beagleboard.org stuff on
github:
https://github.com/beagleboard
Have fun...
Steve
On Tue, Jul 22, 2014 at 3:15 AM, Bryan <just4tech83@gmail.com> wrote:
> Please suggest me link to get meta layer for beagkeboard.
> On Jul 17, 2014 10:36 AM, "Bryan" <just4tech83@gmail.com> wrote:
>
> >
> > Hi,
> > Thanks for your suggestion to use meta-ti layer. Cau you please tell
> us
> > where we can find this layer as we couldn't find it on openembedded git.
> >
> > We tried with following link to build but it gives error while building.
> > https://github.com/beagleboard/meta-beagleboard
> >
> >
> > Thanks
> > Bryan
> > On Jul 15, 2014 5:43 PM, "Cliff Brake" <cbrake@bec-systems.com> wrote:
> >
> >> The meta-ti layer includes support for the beagleboard. You probably
> >> want the linux-mainline 3.2 recipe.
> >>
> >> Cliff
> >>
> >> On 07/15/2014 12:29 AM, Bryan wrote:
> >>
> >> Hi Cliff,
> >> thanks for your suggestion, i tried links which you mentioned
> in
> >> your mail. Now i am able to build minimal image for MACHINE = qmux6.
> >> Can you please tell us how can we make it for beagleboard omap 3530.
> >> Where can we find support layer for beagleboard.
> >>
> >> Thanks a lot in advance !
> >> On Jul 11, 2014 11:30 AM, "Bryan" <just4tech83@gmail.com> wrote:
> >>
> >>> Hi,
> >>> As per your suggestion we took oe-core and other packages from
> >>> followinf link:
> >>> -> http://git.openembedded.org/meta-openembedded
> >>>
> >>> We are using bitbake version 1.23.1.
> >>>
> >>> We have to build image for beagleboard so we find following to build
> >>> image:
> >>>
> >>> ->
> >>>
> http://www.crashcourse.ca/wiki/index.php/Building_for_BBB_using_OpenEmbedded
> >>>
> >>> While following steps from the above link we have done following
> >>> settings in local.conf and bblayers.conf file.
> >>>
> >>> MACHINE ??= "beaglebone"
> >>> BBLAYERS ?= " \
> >>> /home/rpjday/oe/dist/layers/oe-core/meta \
> >>> /home/rpjday/oe/dist/layers/meta-openembedded/meta-oe \
> >>> /home/rpjday/oe/dist/layers/meta-beagleboard/common-bsp \
> >>> "
> >>> Now while running "bitbake core-image-minimal" command we are getting
> >>> following issues :
> >>>
> >>> chown: changing ownership of
> >>>
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/intro_what.html':
> >>> Operation not permitted
> >>> chown: changing ownership of
> >>>
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/program_ram.html':
> >>> Operation not permitted
> >>> chown: changing ownership of
> >>>
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/arch_apis.html':
> >>> Operation not permitted
> >>> chown: changing ownership of
> >>>
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/transapp_reclimit.html':
> >>> Operation not permitted
> >>> chown: changing ownership of
> >>>
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/am_close.html':
> >>> Operation not permitted
> >>> chown: changing ownership of
> >>>
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/lock_stdmode.html':
> >>> Operation not permitted
> >>> chown: changing ownership of
> >>>
> `/home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image/home/test/oe/oe-core/build/tmp-eglibc/sysroots/i686-linux/usr/share/doc/programmer_reference/transapp_env_open.html':
> >>> Operation not permitted
> >>>
> >>> WARNING:
> >>>
> /home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/temp/run.do_install.26236:1
> >>> exit 1 from
> >>> chown -R root:root
> >>>
> /home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/image
> >>> ERROR: Function failed: do_install (log file is located at
> >>>
> /home/test/oe/oe-core/build/tmp-eglibc/work/i686-linux/db-native/5.3.21-r0/temp/log.do_install.26236)
> >>>
> >>> one more doubt about the code base which we should follow as we found
> >>> one other link which have oe-core code at "
> >>> https://github.com/openembedded". We have tried both and found
> seperate
> >>> issues while using both.
> >>>
> >>> Please suggest us how we can overcome these issues to get test image
> >>> build for beagleboard.
> >>>
> >>> Thanks in advance
> >>> ---------- Forwarded message ----------
> >>> From: "Philip Balister" <philip@balister.org>
> >>> Date: Jul 8, 2014 9:42 PM
> >>> Subject: Re: [oe] open embedded build issues with beagle board
> >>> To: <openembedded-devel@lists.openembedded.org>
> >>> Cc:
> >>>
> >>> On 07/08/2014 02:54 AM, Bryan wrote:
> >>> > Hi All
> >>> > I am trying to build Openembeeded classic for Beagle board-XM but i
> >>> am
> >>> > getting lot of broken link issues. I have set DISTRO as
> >>> angstrom-2010.x in
> >>> > local.conf. Is this approach ok? or should i move to openembedded
> >>> core ??
> >>> > Pls suggest.
> >>>
> >>> Use the current Angstrom instructions, oe-classic is pretty much
> >>> completely unsupported now.
> >>>
> >>> Philip
> >>>
> >>> >
> >>> > Broken link e.g.
> >>> >
> >>> > Resolving www.angstrom-distribution.org (
> www.angstrom-distribution.org
> >>> )...
> >>> > 140.211.169.177
> >>> > Connecting to www.angstrom-distribution.org
> >>> > (www.angstrom-distribution.org)|140.211.169.177|:80...
> >>> > connected.
> >>> > HTTP request sent, awaiting response...
> >>> > 404 Not Found 2014-07-08 10:13:43 ERROR 404: Not Found.
> >>> >
> >>> > Thanks in advance
> >>> >
> >>> --
> >>> _______________________________________________
> >>> Openembedded-devel mailing list
> >>> Openembedded-devel@lists.openembedded.org
> >>> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
> >>>
> >>
> >>
> --
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
>
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2014-07-23 1:10 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-07-08 6:54 open embedded build issues with beagle board Bryan
2014-07-08 14:47 ` Cliff Brake
2014-07-08 16:11 ` Philip Balister
2014-07-11 6:00 ` Bryan
2014-07-11 13:11 ` Cliff Brake
2014-07-15 4:29 ` Bryan
2014-07-15 6:04 ` Stephen Arnold
[not found] ` <53C51AE2.4030100@bec-systems.com>
[not found] ` <CAD2C2VR22ww51=1UQbW7OxtWvr8dV1PjLhr0d0O176JtX6PJKQ@mail.gmail.com>
2014-07-17 6:59 ` Bryan
2014-07-17 7:05 ` Henning Heinold
2014-07-17 7:14 ` Stephen Arnold
2014-07-22 10:15 ` Bryan
2014-07-23 1:10 ` Stephen Arnold
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.