Re: [PATCH v2 1/4] watchdog: meson: Enable meson SoC specific data

[Carlo Caione <carlo@caione.org>]

On Sat, Nov 7, 2015 at 4:29 PM, Guenter Roeck <linux@roeck-us.net> wrote:
> On 11/07/2015 03:02 AM, Carlo Caione wrote:
>>
>> From: Carlo Caione <carlo@endlessm.com>
>>
>> With this patch we refactor the driver code to enable watchdog support
>> for all platforms based on Amlogic meson SoCs.
>>
>> Signed-off-by: Carlo Caione <carlo@endlessm.com>
>> ---
>>   drivers/watchdog/meson_wdt.c | 56
>> ++++++++++++++++++++++++++++++--------------
>>   1 file changed, 39 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/watchdog/meson_wdt.c b/drivers/watchdog/meson_wdt.c
>> index 1f4155e..446af94 100644
>> --- a/drivers/watchdog/meson_wdt.c
>> +++ b/drivers/watchdog/meson_wdt.c
>> @@ -19,6 +19,7 @@
>>   #include <linux/moduleparam.h>
>>   #include <linux/notifier.h>
>>   #include <linux/of.h>
>> +#include <linux/of_device.h>
>>   #include <linux/platform_device.h>
>>   #include <linux/reboot.h>
>>   #include <linux/types.h>
>> @@ -27,35 +28,47 @@
>>   #define DRV_NAME              "meson_wdt"
>>
>>   #define MESON_WDT_TC          0x00
>> -#define MESON_WDT_TC_EN                BIT(22)
>> -#define MESON_WDT_TC_TM_MASK   0x3fffff
>>   #define MESON_WDT_DC_RESET    (3 << 24)
>>
>>   #define MESON_WDT_RESET               0x04
>>
>> -#define MESON_WDT_TIMEOUT      30
>> +#define MESON_WDT_TIMEOUT      5
>
>
> This is not a reasonable default, the change is not mentioned
> in the description, and it is unrelated to the change at hand.

The problem is that the default is too small or simply that the change
is not mentioned?

For the meson8b the maximum timeout is ~8 sec whereas for meson6 is
~40 sec that's why I lowered the default from 30 to 5 sec.
I can set a different default for each SoC but at least for meson8b
the value will be always < 8 sec.

Thanks,

-- 
Carlo Caione