From: Jacky Bai <ping.bai@nxp.com> To: Rob Herring <robh@kernel.org> Cc: "shawnguo@kernel.org" <shawnguo@kernel.org>, "sboyd@kernel.org" <sboyd@kernel.org>, "s.hauer@pengutronix.de" <s.hauer@pengutronix.de>, "linus.walleij@linaro.org" <linus.walleij@linaro.org>, Aisheng Dong <aisheng.dong@nxp.com>, "festevam@gmail.com" <festevam@gmail.com>, "kernel@pengutronix.de" <kernel@pengutronix.de>, dl-linux-imx <linux-imx@nxp.com>, "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org> Subject: RE: [PATCH 10/11] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp Date: Fri, 18 Jun 2021 01:41:31 +0000 [thread overview] Message-ID: <DBBPR04MB7930F4169C57476C73FD924E870D9@DBBPR04MB7930.eurprd04.prod.outlook.com> (raw) In-Reply-To: <DBBPR04MB7930670926DD2CB2A474DDAD870E9@DBBPR04MB7930.eurprd04.prod.outlook.com> > Subject: RE: [PATCH 10/11] arm64: dts: imx8ulp: Add the basic dtsi file for > imx8ulp > > > Subject: Re: [PATCH 10/11] arm64: dts: imx8ulp: Add the basic dtsi > > file for imx8ulp > > > > On Mon, Jun 07, 2021 at 04:39:20PM +0800, Jacky Bai wrote: > > > Add the basic dtsi support for i.MX8ULP. > > > > > > i.MX 8ULP is part of the ULP family with emphasis on extreme > > > low-power techniques using the 28 nm fully depleted silicon on > > > insulator process. Like i.MX 7ULP, i.MX 8ULP continues to be based > > > on asymmetric architecture, however will add a third DSP domain for > > > advanced voice/audio capability and a Graphics domain where it is > > > possible to access graphics resources from the application side or > > > the realtime side. > > > > > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> > > > --- > > > .../boot/dts/freescale/imx8ulp-pinfunc.h | 978 > > ++++++++++++++++++ > > > arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 474 +++++++++ > > > 2 files changed, 1452 insertions(+) create mode 100755 > > > arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > > > create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > > > b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > > > new file mode 100755 > > > index 000000000000..faa702634a38 > > > --- /dev/null > > > +++ b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > > > @@ -0,0 +1,978 @@ > > > +/* SPDX-License-Identifier: GPL-2.0+ */ > > > > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > > b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > > new file mode 100644 > > > index 000000000000..469c2dcd4636 > > > --- /dev/null > > > +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > > @@ -0,0 +1,474 @@ > > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > > > How can I use MIT when GPL only header is included? Dual license the > > header please. > > > > Ok, will add Dual license in the above file. > > > And NXP is good with GPLv3, GPLv4, etc.? > > It seems no file use GPLv3 in latest kernel, I will keep use GPLv2 for now, is it > ok? Sorry, Rob, it seems I misunderstand what you mean ^_^. I just checked the NXP license policy, GPLv2 or later is ok. BR Jacky Bai > > BR > Jacky Bai > > > > > +/* > > > + * Copyright 2021 NXP > > > + */ > > > + > > > +#include <dt-bindings/clock/imx8ulp-clock.h> > > > +#include <dt-bindings/gpio/gpio.h> > > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > > + > > > +#include "imx8ulp-pinfunc.h"
WARNING: multiple messages have this Message-ID (diff)
From: Jacky Bai <ping.bai@nxp.com> To: Rob Herring <robh@kernel.org> Cc: "shawnguo@kernel.org" <shawnguo@kernel.org>, "sboyd@kernel.org" <sboyd@kernel.org>, "s.hauer@pengutronix.de" <s.hauer@pengutronix.de>, "linus.walleij@linaro.org" <linus.walleij@linaro.org>, Aisheng Dong <aisheng.dong@nxp.com>, "festevam@gmail.com" <festevam@gmail.com>, "kernel@pengutronix.de" <kernel@pengutronix.de>, dl-linux-imx <linux-imx@nxp.com>, "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org> Subject: RE: [PATCH 10/11] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp Date: Fri, 18 Jun 2021 01:41:31 +0000 [thread overview] Message-ID: <DBBPR04MB7930F4169C57476C73FD924E870D9@DBBPR04MB7930.eurprd04.prod.outlook.com> (raw) In-Reply-To: <DBBPR04MB7930670926DD2CB2A474DDAD870E9@DBBPR04MB7930.eurprd04.prod.outlook.com> > Subject: RE: [PATCH 10/11] arm64: dts: imx8ulp: Add the basic dtsi file for > imx8ulp > > > Subject: Re: [PATCH 10/11] arm64: dts: imx8ulp: Add the basic dtsi > > file for imx8ulp > > > > On Mon, Jun 07, 2021 at 04:39:20PM +0800, Jacky Bai wrote: > > > Add the basic dtsi support for i.MX8ULP. > > > > > > i.MX 8ULP is part of the ULP family with emphasis on extreme > > > low-power techniques using the 28 nm fully depleted silicon on > > > insulator process. Like i.MX 7ULP, i.MX 8ULP continues to be based > > > on asymmetric architecture, however will add a third DSP domain for > > > advanced voice/audio capability and a Graphics domain where it is > > > possible to access graphics resources from the application side or > > > the realtime side. > > > > > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> > > > --- > > > .../boot/dts/freescale/imx8ulp-pinfunc.h | 978 > > ++++++++++++++++++ > > > arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 474 +++++++++ > > > 2 files changed, 1452 insertions(+) create mode 100755 > > > arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > > > create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > > > b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > > > new file mode 100755 > > > index 000000000000..faa702634a38 > > > --- /dev/null > > > +++ b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > > > @@ -0,0 +1,978 @@ > > > +/* SPDX-License-Identifier: GPL-2.0+ */ > > > > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > > b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > > new file mode 100644 > > > index 000000000000..469c2dcd4636 > > > --- /dev/null > > > +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > > @@ -0,0 +1,474 @@ > > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > > > How can I use MIT when GPL only header is included? Dual license the > > header please. > > > > Ok, will add Dual license in the above file. > > > And NXP is good with GPLv3, GPLv4, etc.? > > It seems no file use GPLv3 in latest kernel, I will keep use GPLv2 for now, is it > ok? Sorry, Rob, it seems I misunderstand what you mean ^_^. I just checked the NXP license policy, GPLv2 or later is ok. BR Jacky Bai > > BR > Jacky Bai > > > > > +/* > > > + * Copyright 2021 NXP > > > + */ > > > + > > > +#include <dt-bindings/clock/imx8ulp-clock.h> > > > +#include <dt-bindings/gpio/gpio.h> > > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > > + > > > +#include "imx8ulp-pinfunc.h" _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-06-18 1:41 UTC|newest] Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-07 8:39 [PATCH 00/11] Add imx8ulp basic dtsi support Jacky Bai 2021-06-07 8:39 ` Jacky Bai 2021-06-07 8:39 ` [PATCH 01/11] dt-bindings: gpio: gpio-vf610: Add imx8ulp compatible string Jacky Bai 2021-06-07 8:39 ` Jacky Bai 2021-06-09 10:56 ` Linus Walleij 2021-06-09 10:56 ` Linus Walleij 2021-06-11 13:45 ` Dong Aisheng 2021-06-11 13:45 ` Dong Aisheng 2021-06-16 23:42 ` Rob Herring 2021-06-16 23:42 ` Rob Herring 2021-06-07 8:39 ` [PATCH 02/11] dt-bindings: i2c: imx-lpi2c: " Jacky Bai 2021-06-07 8:39 ` Jacky Bai 2021-06-11 13:46 ` Dong Aisheng 2021-06-11 13:46 ` Dong Aisheng 2021-06-16 23:43 ` Rob Herring 2021-06-16 23:43 ` Rob Herring 2021-06-07 8:39 ` [PATCH 03/11] dt-bindings: mmc: imx-esdhc: Add imx8ulp compatibe string Jacky Bai 2021-06-07 8:39 ` Jacky Bai 2021-06-11 13:50 ` Dong Aisheng 2021-06-11 13:50 ` Dong Aisheng 2021-06-16 23:44 ` Rob Herring 2021-06-16 23:44 ` Rob Herring 2021-06-07 8:39 ` [PATCH 04/11] dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string Jacky Bai 2021-06-07 8:39 ` Jacky Bai 2021-06-11 13:52 ` Dong Aisheng 2021-06-11 13:52 ` Dong Aisheng 2021-06-16 23:44 ` Rob Herring 2021-06-16 23:44 ` Rob Herring 2021-06-07 8:39 ` [PATCH 05/11] dt-bindings: spi: fsl-lpspi: " Jacky Bai 2021-06-07 8:39 ` Jacky Bai 2021-06-11 13:57 ` Dong Aisheng 2021-06-11 13:57 ` Dong Aisheng 2021-06-16 23:45 ` Rob Herring 2021-06-16 23:45 ` Rob Herring 2021-06-07 8:39 ` [PATCH 06/11] dt-bindings: timer: tpm-timer: " Jacky Bai 2021-06-07 8:39 ` Jacky Bai 2021-06-11 13:58 ` Dong Aisheng 2021-06-11 13:58 ` Dong Aisheng 2021-06-16 23:45 ` Rob Herring 2021-06-16 23:45 ` Rob Herring 2021-06-07 8:39 ` [PATCH 07/11] dt-bindings: watchdog: imx7ulp-wdt: " Jacky Bai 2021-06-07 8:39 ` Jacky Bai 2021-06-11 13:58 ` Dong Aisheng 2021-06-11 13:58 ` Dong Aisheng 2021-06-16 23:45 ` Rob Herring 2021-06-16 23:45 ` Rob Herring 2021-06-07 8:39 ` [PATCH 08/11] dt-bindings: arm: fsl: Add binding for imx8ulp evk Jacky Bai 2021-06-07 8:39 ` Jacky Bai 2021-06-11 13:59 ` Dong Aisheng 2021-06-11 13:59 ` Dong Aisheng 2021-06-16 23:46 ` Rob Herring 2021-06-16 23:46 ` Rob Herring 2021-06-07 8:39 ` [PATCH 09/11] dt-bindings: clock: Add imx8ulp clock support Jacky Bai 2021-06-07 8:39 ` Jacky Bai 2021-06-11 14:17 ` Dong Aisheng 2021-06-11 14:17 ` Dong Aisheng 2021-06-16 23:47 ` Rob Herring 2021-06-16 23:47 ` Rob Herring 2021-06-17 9:09 ` Jacky Bai 2021-06-17 9:09 ` Jacky Bai 2021-06-07 8:39 ` [PATCH 10/11] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp Jacky Bai 2021-06-11 14:40 ` Aisheng Dong 2021-06-11 14:40 ` Aisheng Dong 2021-06-16 23:51 ` Rob Herring 2021-06-16 23:51 ` Rob Herring 2021-06-17 9:03 ` Jacky Bai 2021-06-17 9:03 ` Jacky Bai 2021-06-18 1:41 ` Jacky Bai [this message] 2021-06-18 1:41 ` Jacky Bai 2021-06-07 8:39 ` [PATCH 11/11] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board Jacky Bai 2021-06-07 8:39 ` Jacky Bai 2021-06-11 14:43 ` Dong Aisheng 2021-06-11 14:43 ` Dong Aisheng
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=DBBPR04MB7930F4169C57476C73FD924E870D9@DBBPR04MB7930.eurprd04.prod.outlook.com \ --to=ping.bai@nxp.com \ --cc=aisheng.dong@nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=robh@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=sboyd@kernel.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.