All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Lars Povlsen <lars.povlsen@microchip.com>,
	Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	UNGLinuxDriver@microchip.com, netdev@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH net-next 1/3] net: sparx5: populate supported_interfaces member
Date: Tue, 16 Nov 2021 10:02:01 +0000	[thread overview]
Message-ID: <E1mmvHt-0078WC-Jp@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <YZOBiFK8DkYUSRml@shell.armlinux.org.uk>

Populate the phy_interface_t bitmap for the Microchip Sparx5 driver
with interfaces modes supported by the MAC.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../ethernet/microchip/sparx5/sparx5_main.c   | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
index 4625d4fb4cde..3cb6c1fe43ff 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
@@ -293,6 +293,30 @@ static int sparx5_create_port(struct sparx5 *sparx5,
 	spx5_port->phylink_config.type = PHYLINK_NETDEV;
 	spx5_port->phylink_config.pcs_poll = true;
 
+	__set_bit(PHY_INTERFACE_MODE_SGMII,
+		  spx5_port->phylink_config.supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_QSGMII,
+		  spx5_port->phylink_config.supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_1000BASEX,
+		  spx5_port->phylink_config.supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_2500BASEX,
+		  spx5_port->phylink_config.supported_interfaces);
+
+	if (spx5_port->conf.bandwidth == SPEED_5000 ||
+	    spx5_port->conf.bandwidth == SPEED_10000 ||
+	    spx5_port->conf.bandwidth == SPEED_25000)
+		__set_bit(PHY_INTERFACE_MODE_5GBASER,
+			  spx5_port->phylink_config.supported_interfaces);
+
+	if (spx5_port->conf.bandwidth == SPEED_10000 ||
+	    spx5_port->conf.bandwidth == SPEED_25000)
+		__set_bit(PHY_INTERFACE_MODE_10GBASER,
+			  spx5_port->phylink_config.supported_interfaces);
+
+	if (spx5_port->conf.bandwidth == SPEED_25000)
+		__set_bit(PHY_INTERFACE_MODE_25GBASER,
+			  spx5_port->phylink_config.supported_interfaces);
+
 	phylink = phylink_create(&spx5_port->phylink_config,
 				 of_fwnode_handle(config->node),
 				 config->conf.phy_mode,
-- 
2.30.2


WARNING: multiple messages have this Message-ID (diff)
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Lars Povlsen <lars.povlsen@microchip.com>,
	Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	UNGLinuxDriver@microchip.com, netdev@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH net-next 1/3] net: sparx5: populate supported_interfaces member
Date: Tue, 16 Nov 2021 10:02:01 +0000	[thread overview]
Message-ID: <E1mmvHt-0078WC-Jp@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <YZOBiFK8DkYUSRml@shell.armlinux.org.uk>

Populate the phy_interface_t bitmap for the Microchip Sparx5 driver
with interfaces modes supported by the MAC.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../ethernet/microchip/sparx5/sparx5_main.c   | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
index 4625d4fb4cde..3cb6c1fe43ff 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
@@ -293,6 +293,30 @@ static int sparx5_create_port(struct sparx5 *sparx5,
 	spx5_port->phylink_config.type = PHYLINK_NETDEV;
 	spx5_port->phylink_config.pcs_poll = true;
 
+	__set_bit(PHY_INTERFACE_MODE_SGMII,
+		  spx5_port->phylink_config.supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_QSGMII,
+		  spx5_port->phylink_config.supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_1000BASEX,
+		  spx5_port->phylink_config.supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_2500BASEX,
+		  spx5_port->phylink_config.supported_interfaces);
+
+	if (spx5_port->conf.bandwidth == SPEED_5000 ||
+	    spx5_port->conf.bandwidth == SPEED_10000 ||
+	    spx5_port->conf.bandwidth == SPEED_25000)
+		__set_bit(PHY_INTERFACE_MODE_5GBASER,
+			  spx5_port->phylink_config.supported_interfaces);
+
+	if (spx5_port->conf.bandwidth == SPEED_10000 ||
+	    spx5_port->conf.bandwidth == SPEED_25000)
+		__set_bit(PHY_INTERFACE_MODE_10GBASER,
+			  spx5_port->phylink_config.supported_interfaces);
+
+	if (spx5_port->conf.bandwidth == SPEED_25000)
+		__set_bit(PHY_INTERFACE_MODE_25GBASER,
+			  spx5_port->phylink_config.supported_interfaces);
+
 	phylink = phylink_create(&spx5_port->phylink_config,
 				 of_fwnode_handle(config->node),
 				 config->conf.phy_mode,
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-11-16 10:02 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-16 10:01 [PATCH net-next 0/3] net: sparx5: phylink validate implementation updates Russell King (Oracle)
2021-11-16 10:01 ` Russell King (Oracle)
2021-11-16 10:02 ` Russell King (Oracle) [this message]
2021-11-16 10:02   ` [PATCH net-next 1/3] net: sparx5: populate supported_interfaces member Russell King (Oracle)
2021-11-16 10:02 ` [PATCH net-next 2/3] net: sparx5: clean up sparx5_phylink_validate() Russell King (Oracle)
2021-11-16 10:02   ` Russell King (Oracle)
2021-11-16 10:02 ` [PATCH net-next 3/3] net: sparx5: use phylink_generic_validate() Russell King (Oracle)
2021-11-16 10:02   ` Russell King (Oracle)
2021-11-17 11:30 ` [PATCH net-next 0/3] net: sparx5: phylink validate implementation updates patchwork-bot+netdevbpf
2021-11-17 11:30   ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1mmvHt-0078WC-Jp@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=Steen.Hegelund@microchip.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=lars.povlsen@microchip.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.