From: Tao Ren <rentao.bupt@gmail.com>
To: Joel Stanley <joel@jms.id.au>
Cc: "Cédric Le Goater" <clg@kaod.org>,
"John Wang" <wangzq.jn@gmail.com>,
linux-spi@vger.kernel.org,
linux-mtd <linux-mtd@lists.infradead.org>,
"Mark Brown" <broonie@kernel.org>,
"Tudor Ambarus" <tudor.ambarus@microchip.com>,
"Pratyush Yadav" <p.yadav@ti.com>,
"Miquel Raynal" <miquel.raynal@bootlin.com>,
"Richard Weinberger" <richard@nod.at>,
"Vignesh Raghavendra" <vigneshr@ti.com>,
linux-aspeed <linux-aspeed@lists.ozlabs.org>,
"Andrew Jeffery" <andrew@aj.id.au>,
"Chin-Ting Kuo" <chin-ting_kuo@aspeedtech.com>,
devicetree <devicetree@vger.kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Linux ARM" <linux-arm-kernel@lists.infradead.org>,
"Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 00/10] spi: spi-mem: Add driver for Aspeed SMC controllers
Date: Thu, 3 Mar 2022 23:57:50 -0800 [thread overview]
Message-ID: <YiHGfh/4xZRim6Ka@taoren-fedora-PC23YAB4> (raw)
In-Reply-To: <CACPK8Xdo=krCNVVs5=jiSnmyiPkNPd9Dxxyx0Tv8eUHKR5J3cQ@mail.gmail.com>
On Thu, Mar 03, 2022 at 10:01:20AM +0000, Joel Stanley wrote:
> On Wed, 2 Mar 2022 at 17:31, Cédric Le Goater <clg@kaod.org> wrote:
> >
> > Hi,
> >
> > This series adds a new SPI driver using the spi-mem interface for the
> > Aspeed static memory controllers of the AST2600, AST2500 and AST2400
> > SoCs.
> >
> > * AST2600 Firmware SPI Memory Controller (FMC)
> > * AST2600 SPI Flash Controller (SPI1 and SPI2)
>
> I've performed read and write tests on the 2600 controllers, and the
> driver seems stable at the settings you have in the device tree.
>
> Tested-by: Joel Stanley <joel@jms.id.au>
>
> I've added Tao and John to cc as they have tested the 2400 and 2500,
> and I'm sure will be able to provide some Tested-by.
>
> Cheers,
>
> Joel
I've tested the patch series on ast2400 (wedge100) and ast2500 (cmm) by
reading/writing FMC flash0 and flash1 for several times, and no issues
observed so far.
Tested-by: Tao Ren <rentao.bupt@gmail.com>
Cheers,
Tao
WARNING: multiple messages have this Message-ID (diff)
From: Tao Ren <rentao.bupt@gmail.com>
To: Joel Stanley <joel@jms.id.au>
Cc: "Cédric Le Goater" <clg@kaod.org>,
"John Wang" <wangzq.jn@gmail.com>,
linux-spi@vger.kernel.org,
linux-mtd <linux-mtd@lists.infradead.org>,
"Mark Brown" <broonie@kernel.org>,
"Tudor Ambarus" <tudor.ambarus@microchip.com>,
"Pratyush Yadav" <p.yadav@ti.com>,
"Miquel Raynal" <miquel.raynal@bootlin.com>,
"Richard Weinberger" <richard@nod.at>,
"Vignesh Raghavendra" <vigneshr@ti.com>,
linux-aspeed <linux-aspeed@lists.ozlabs.org>,
"Andrew Jeffery" <andrew@aj.id.au>,
"Chin-Ting Kuo" <chin-ting_kuo@aspeedtech.com>,
devicetree <devicetree@vger.kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Linux ARM" <linux-arm-kernel@lists.infradead.org>,
"Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 00/10] spi: spi-mem: Add driver for Aspeed SMC controllers
Date: Thu, 3 Mar 2022 23:57:50 -0800 [thread overview]
Message-ID: <YiHGfh/4xZRim6Ka@taoren-fedora-PC23YAB4> (raw)
In-Reply-To: <CACPK8Xdo=krCNVVs5=jiSnmyiPkNPd9Dxxyx0Tv8eUHKR5J3cQ@mail.gmail.com>
On Thu, Mar 03, 2022 at 10:01:20AM +0000, Joel Stanley wrote:
> On Wed, 2 Mar 2022 at 17:31, Cédric Le Goater <clg@kaod.org> wrote:
> >
> > Hi,
> >
> > This series adds a new SPI driver using the spi-mem interface for the
> > Aspeed static memory controllers of the AST2600, AST2500 and AST2400
> > SoCs.
> >
> > * AST2600 Firmware SPI Memory Controller (FMC)
> > * AST2600 SPI Flash Controller (SPI1 and SPI2)
>
> I've performed read and write tests on the 2600 controllers, and the
> driver seems stable at the settings you have in the device tree.
>
> Tested-by: Joel Stanley <joel@jms.id.au>
>
> I've added Tao and John to cc as they have tested the 2400 and 2500,
> and I'm sure will be able to provide some Tested-by.
>
> Cheers,
>
> Joel
I've tested the patch series on ast2400 (wedge100) and ast2500 (cmm) by
reading/writing FMC flash0 and flash1 for several times, and no issues
observed so far.
Tested-by: Tao Ren <rentao.bupt@gmail.com>
Cheers,
Tao
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: Tao Ren <rentao.bupt@gmail.com>
To: Joel Stanley <joel@jms.id.au>
Cc: "Cédric Le Goater" <clg@kaod.org>,
"John Wang" <wangzq.jn@gmail.com>,
linux-spi@vger.kernel.org,
linux-mtd <linux-mtd@lists.infradead.org>,
"Mark Brown" <broonie@kernel.org>,
"Tudor Ambarus" <tudor.ambarus@microchip.com>,
"Pratyush Yadav" <p.yadav@ti.com>,
"Miquel Raynal" <miquel.raynal@bootlin.com>,
"Richard Weinberger" <richard@nod.at>,
"Vignesh Raghavendra" <vigneshr@ti.com>,
linux-aspeed <linux-aspeed@lists.ozlabs.org>,
"Andrew Jeffery" <andrew@aj.id.au>,
"Chin-Ting Kuo" <chin-ting_kuo@aspeedtech.com>,
devicetree <devicetree@vger.kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Linux ARM" <linux-arm-kernel@lists.infradead.org>,
"Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 00/10] spi: spi-mem: Add driver for Aspeed SMC controllers
Date: Thu, 3 Mar 2022 23:57:50 -0800 [thread overview]
Message-ID: <YiHGfh/4xZRim6Ka@taoren-fedora-PC23YAB4> (raw)
In-Reply-To: <CACPK8Xdo=krCNVVs5=jiSnmyiPkNPd9Dxxyx0Tv8eUHKR5J3cQ@mail.gmail.com>
On Thu, Mar 03, 2022 at 10:01:20AM +0000, Joel Stanley wrote:
> On Wed, 2 Mar 2022 at 17:31, Cédric Le Goater <clg@kaod.org> wrote:
> >
> > Hi,
> >
> > This series adds a new SPI driver using the spi-mem interface for the
> > Aspeed static memory controllers of the AST2600, AST2500 and AST2400
> > SoCs.
> >
> > * AST2600 Firmware SPI Memory Controller (FMC)
> > * AST2600 SPI Flash Controller (SPI1 and SPI2)
>
> I've performed read and write tests on the 2600 controllers, and the
> driver seems stable at the settings you have in the device tree.
>
> Tested-by: Joel Stanley <joel@jms.id.au>
>
> I've added Tao and John to cc as they have tested the 2400 and 2500,
> and I'm sure will be able to provide some Tested-by.
>
> Cheers,
>
> Joel
I've tested the patch series on ast2400 (wedge100) and ast2500 (cmm) by
reading/writing FMC flash0 and flash1 for several times, and no issues
observed so far.
Tested-by: Tao Ren <rentao.bupt@gmail.com>
Cheers,
Tao
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-03-04 7:57 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-02 17:31 [PATCH v2 00/10] spi: spi-mem: Add driver for Aspeed SMC controllers Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 17:31 ` [PATCH v2 01/10] mtd: spi-nor: aspeed: Rename Kconfig option Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 22:16 ` Joel Stanley
2022-03-02 22:16 ` Joel Stanley
2022-03-02 22:16 ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 02/10] ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 22:18 ` Joel Stanley
2022-03-02 22:18 ` Joel Stanley
2022-03-02 22:18 ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 03/10] dt-bindings: spi: Add Aspeed SMC controllers device tree binding Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 21:26 ` Rob Herring
2022-03-02 21:26 ` Rob Herring
2022-03-02 21:26 ` Rob Herring
2022-03-02 22:20 ` Joel Stanley
2022-03-02 22:20 ` Joel Stanley
2022-03-02 22:20 ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 04/10] spi: spi-mem: Add driver for Aspeed SMC controllers Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 23:38 ` Joel Stanley
2022-03-02 23:38 ` Joel Stanley
2022-03-02 23:38 ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 05/10] spi: aspeed: Add support for direct mapping Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 22:48 ` Joel Stanley
2022-03-02 22:48 ` Joel Stanley
2022-03-02 22:48 ` Joel Stanley
2022-03-03 12:02 ` kernel test robot
2022-03-02 17:31 ` [PATCH v2 06/10] spi: aspeed: Adjust direct mapping to device size Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 22:31 ` Joel Stanley
2022-03-02 22:31 ` Joel Stanley
2022-03-02 22:31 ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 07/10] spi: aspeed: Workaround AST2500 limitations Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 22:30 ` Joel Stanley
2022-03-02 22:30 ` Joel Stanley
2022-03-02 22:30 ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 08/10] spi: aspeed: Add support for the AST2400 SPI controller Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 22:33 ` Joel Stanley
2022-03-02 22:33 ` Joel Stanley
2022-03-02 22:33 ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 09/10] spi: aspeed: Calibrate read timings Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 22:44 ` Joel Stanley
2022-03-02 22:44 ` Joel Stanley
2022-03-02 22:44 ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 10/10] ARM: dts: aspeed: Enable Dual SPI RX transfers Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 22:45 ` Joel Stanley
2022-03-02 22:45 ` Joel Stanley
2022-03-02 22:45 ` Joel Stanley
2022-03-02 22:48 ` Joel Stanley
2022-03-02 22:48 ` Joel Stanley
2022-03-02 22:48 ` Joel Stanley
2022-03-03 7:57 ` Cédric Le Goater
2022-03-03 7:57 ` Cédric Le Goater
2022-03-03 7:57 ` Cédric Le Goater
2022-03-03 10:01 ` [PATCH v2 00/10] spi: spi-mem: Add driver for Aspeed SMC controllers Joel Stanley
2022-03-03 10:01 ` Joel Stanley
2022-03-03 10:01 ` Joel Stanley
2022-03-04 7:57 ` Tao Ren [this message]
2022-03-04 7:57 ` Tao Ren
2022-03-04 7:57 ` Tao Ren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YiHGfh/4xZRim6Ka@taoren-fedora-PC23YAB4 \
--to=rentao.bupt@gmail.com \
--cc=andrew@aj.id.au \
--cc=broonie@kernel.org \
--cc=chin-ting_kuo@aspeedtech.com \
--cc=clg@kaod.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=p.yadav@ti.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=tudor.ambarus@microchip.com \
--cc=vigneshr@ti.com \
--cc=wangzq.jn@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.