* [PATCH v3 1/3] arm64: dts: rockchip: k3566-quartz64-a: fix names entries
@ 2022-09-16 15:58 ` Alessandro Carminati
0 siblings, 0 replies; 3+ messages in thread
From: Alessandro Carminati @ 2022-09-16 15:58 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Heiko Stuebner, devicetree,
linux-arm-kernel, linux-rockchip, linux-kernel
Fixes: "No underscores in node names" general rule,
Fixes: The newly agreed on scheme for regulators to have
"-regulator" at the end
Signed-off-by: Alessandro Carminati <alessandro.carminati@gmail.com>
---
.../boot/dts/rockchip/rk3566-quartz64-a.dts | 22 +++++++++----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index d943559b157c..a30b17fd3c27 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -28,7 +28,7 @@ gmac1_clkin: external-gmac1-clock {
#clock-cells = <0>;
};
- fan: gpio_fan {
+ fan: gpio-fan {
compatible = "gpio-fan";
gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0
@@ -38,7 +38,7 @@ fan: gpio_fan {
#cooling-cells = <2>;
};
- hdmi-con {
+ hdmi-connector {
compatible = "hdmi-connector";
type = "a";
@@ -116,7 +116,7 @@ simple-audio-card,codec {
};
};
- vcc12v_dcin: vcc12v_dcin {
+ vcc12v_dcin: vcc12v-dcin-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
@@ -139,7 +139,7 @@ vbus: vbus {
vin-supply = <&vcc12v_dcin>;
};
- vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
+ vcc3v3_pcie_p: vcc3v3-p-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
@@ -151,7 +151,7 @@ vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
vin-supply = <&vcc_3v3>;
};
- vcc5v0_usb: vcc5v0_usb {
+ vcc5v0_usb: vcc5v0-usb-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
regulator-always-on;
@@ -165,7 +165,7 @@ vcc5v0_usb: vcc5v0_usb {
* the host ports are sourced from vcc5v0_usb
* the otg port is sourced from vcc5v0_midu
*/
- vcc5v0_usb20_host: vcc5v0_usb20_host {
+ vcc5v0_usb20_host: vcc5v0-usb20-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
@@ -177,7 +177,7 @@ vcc5v0_usb20_host: vcc5v0_usb20_host {
vin-supply = <&vcc5v0_usb>;
};
- vcc5v0_usb20_otg: vcc5v0_usb20_otg {
+ vcc5v0_usb20_otg: vcc5v0-usb20-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
@@ -187,7 +187,7 @@ vcc5v0_usb20_otg: vcc5v0_usb20_otg {
vin-supply = <&dcdc_boost>;
};
- vcc3v3_sd: vcc3v3_sd {
+ vcc3v3_sd: vcc3v3-sd-regulator {
compatible = "regulator-fixed";
enable-active-low;
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
@@ -201,7 +201,7 @@ vcc3v3_sd: vcc3v3_sd {
};
/* sourced from vbus and vcc_bat+ via rk817 sw5 */
- vcc_sys: vcc_sys {
+ vcc_sys: vcc-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-always-on;
@@ -212,7 +212,7 @@ vcc_sys: vcc_sys {
};
/* sourced from vcc_sys, sdio module operates internally at 3.3v */
- vcc_wl: vcc_wl {
+ vcc_wl: vcc-wl-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_wl";
regulator-always-on;
@@ -249,7 +249,7 @@ &cpu3 {
&cpu_thermal {
trips {
- cpu_hot: cpu_hot {
+ cpu_hot: cpu-hot {
temperature = <55000>;
hysteresis = <2000>;
type = "active";
--
2.34.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v3 1/3] arm64: dts: rockchip: k3566-quartz64-a: fix names entries
@ 2022-09-16 15:58 ` Alessandro Carminati
0 siblings, 0 replies; 3+ messages in thread
From: Alessandro Carminati @ 2022-09-16 15:58 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Heiko Stuebner, devicetree,
linux-arm-kernel, linux-rockchip, linux-kernel
Fixes: "No underscores in node names" general rule,
Fixes: The newly agreed on scheme for regulators to have
"-regulator" at the end
Signed-off-by: Alessandro Carminati <alessandro.carminati@gmail.com>
---
.../boot/dts/rockchip/rk3566-quartz64-a.dts | 22 +++++++++----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index d943559b157c..a30b17fd3c27 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -28,7 +28,7 @@ gmac1_clkin: external-gmac1-clock {
#clock-cells = <0>;
};
- fan: gpio_fan {
+ fan: gpio-fan {
compatible = "gpio-fan";
gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0
@@ -38,7 +38,7 @@ fan: gpio_fan {
#cooling-cells = <2>;
};
- hdmi-con {
+ hdmi-connector {
compatible = "hdmi-connector";
type = "a";
@@ -116,7 +116,7 @@ simple-audio-card,codec {
};
};
- vcc12v_dcin: vcc12v_dcin {
+ vcc12v_dcin: vcc12v-dcin-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
@@ -139,7 +139,7 @@ vbus: vbus {
vin-supply = <&vcc12v_dcin>;
};
- vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
+ vcc3v3_pcie_p: vcc3v3-p-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
@@ -151,7 +151,7 @@ vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
vin-supply = <&vcc_3v3>;
};
- vcc5v0_usb: vcc5v0_usb {
+ vcc5v0_usb: vcc5v0-usb-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
regulator-always-on;
@@ -165,7 +165,7 @@ vcc5v0_usb: vcc5v0_usb {
* the host ports are sourced from vcc5v0_usb
* the otg port is sourced from vcc5v0_midu
*/
- vcc5v0_usb20_host: vcc5v0_usb20_host {
+ vcc5v0_usb20_host: vcc5v0-usb20-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
@@ -177,7 +177,7 @@ vcc5v0_usb20_host: vcc5v0_usb20_host {
vin-supply = <&vcc5v0_usb>;
};
- vcc5v0_usb20_otg: vcc5v0_usb20_otg {
+ vcc5v0_usb20_otg: vcc5v0-usb20-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
@@ -187,7 +187,7 @@ vcc5v0_usb20_otg: vcc5v0_usb20_otg {
vin-supply = <&dcdc_boost>;
};
- vcc3v3_sd: vcc3v3_sd {
+ vcc3v3_sd: vcc3v3-sd-regulator {
compatible = "regulator-fixed";
enable-active-low;
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
@@ -201,7 +201,7 @@ vcc3v3_sd: vcc3v3_sd {
};
/* sourced from vbus and vcc_bat+ via rk817 sw5 */
- vcc_sys: vcc_sys {
+ vcc_sys: vcc-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-always-on;
@@ -212,7 +212,7 @@ vcc_sys: vcc_sys {
};
/* sourced from vcc_sys, sdio module operates internally at 3.3v */
- vcc_wl: vcc_wl {
+ vcc_wl: vcc-wl-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_wl";
regulator-always-on;
@@ -249,7 +249,7 @@ &cpu3 {
&cpu_thermal {
trips {
- cpu_hot: cpu_hot {
+ cpu_hot: cpu-hot {
temperature = <55000>;
hysteresis = <2000>;
type = "active";
--
2.34.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v3 1/3] arm64: dts: rockchip: k3566-quartz64-a: fix names entries
@ 2022-09-16 15:58 ` Alessandro Carminati
0 siblings, 0 replies; 3+ messages in thread
From: Alessandro Carminati @ 2022-09-16 15:58 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Heiko Stuebner, devicetree,
linux-arm-kernel, linux-rockchip, linux-kernel
Fixes: "No underscores in node names" general rule,
Fixes: The newly agreed on scheme for regulators to have
"-regulator" at the end
Signed-off-by: Alessandro Carminati <alessandro.carminati@gmail.com>
---
.../boot/dts/rockchip/rk3566-quartz64-a.dts | 22 +++++++++----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index d943559b157c..a30b17fd3c27 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -28,7 +28,7 @@ gmac1_clkin: external-gmac1-clock {
#clock-cells = <0>;
};
- fan: gpio_fan {
+ fan: gpio-fan {
compatible = "gpio-fan";
gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0
@@ -38,7 +38,7 @@ fan: gpio_fan {
#cooling-cells = <2>;
};
- hdmi-con {
+ hdmi-connector {
compatible = "hdmi-connector";
type = "a";
@@ -116,7 +116,7 @@ simple-audio-card,codec {
};
};
- vcc12v_dcin: vcc12v_dcin {
+ vcc12v_dcin: vcc12v-dcin-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
@@ -139,7 +139,7 @@ vbus: vbus {
vin-supply = <&vcc12v_dcin>;
};
- vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
+ vcc3v3_pcie_p: vcc3v3-p-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
@@ -151,7 +151,7 @@ vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
vin-supply = <&vcc_3v3>;
};
- vcc5v0_usb: vcc5v0_usb {
+ vcc5v0_usb: vcc5v0-usb-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
regulator-always-on;
@@ -165,7 +165,7 @@ vcc5v0_usb: vcc5v0_usb {
* the host ports are sourced from vcc5v0_usb
* the otg port is sourced from vcc5v0_midu
*/
- vcc5v0_usb20_host: vcc5v0_usb20_host {
+ vcc5v0_usb20_host: vcc5v0-usb20-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
@@ -177,7 +177,7 @@ vcc5v0_usb20_host: vcc5v0_usb20_host {
vin-supply = <&vcc5v0_usb>;
};
- vcc5v0_usb20_otg: vcc5v0_usb20_otg {
+ vcc5v0_usb20_otg: vcc5v0-usb20-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
@@ -187,7 +187,7 @@ vcc5v0_usb20_otg: vcc5v0_usb20_otg {
vin-supply = <&dcdc_boost>;
};
- vcc3v3_sd: vcc3v3_sd {
+ vcc3v3_sd: vcc3v3-sd-regulator {
compatible = "regulator-fixed";
enable-active-low;
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
@@ -201,7 +201,7 @@ vcc3v3_sd: vcc3v3_sd {
};
/* sourced from vbus and vcc_bat+ via rk817 sw5 */
- vcc_sys: vcc_sys {
+ vcc_sys: vcc-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-always-on;
@@ -212,7 +212,7 @@ vcc_sys: vcc_sys {
};
/* sourced from vcc_sys, sdio module operates internally at 3.3v */
- vcc_wl: vcc_wl {
+ vcc_wl: vcc-wl-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_wl";
regulator-always-on;
@@ -249,7 +249,7 @@ &cpu3 {
&cpu_thermal {
trips {
- cpu_hot: cpu_hot {
+ cpu_hot: cpu-hot {
temperature = <55000>;
hysteresis = <2000>;
type = "active";
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-09-16 16:05 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-16 15:58 [PATCH v3 1/3] arm64: dts: rockchip: k3566-quartz64-a: fix names entries Alessandro Carminati
2022-09-16 15:58 ` Alessandro Carminati
2022-09-16 15:58 ` Alessandro Carminati
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.