All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Michael Walle <michael@walle.cc>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-can@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
	Rob Herring <robh+dt@kernel.org>,
	Joakim Zhang <qiangqing.zhang@nxp.com>,
	Oleksij Rempel <o.rempel@pengutronix.de>
Subject: Re: [PATCH v2 1/3] dt-bindings: can: flexcan: list supported processors
Date: Tue, 6 Oct 2020 21:25:09 +0200	[thread overview]
Message-ID: <afdcecef-10c6-738b-29fe-09353d1c7c92@pengutronix.de> (raw)
In-Reply-To: <20201001091131.30514-2-michael@walle.cc>


[-- Attachment #1.1: Type: text/plain, Size: 1530 bytes --]

On 10/1/20 11:11 AM, Michael Walle wrote:
> The compatible is a pattern match. Explicitly list all possible values.
> Also mention that the ls1028ar1 must be followed by lx2160ar1.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
>  Documentation/devicetree/bindings/net/can/fsl-flexcan.txt | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> index 94c0f8bf4deb..c6152dc2d2d0 100644
> --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> @@ -4,6 +4,12 @@ Required properties:
>  
>  - compatible : Should be "fsl,<processor>-flexcan"
>  
> +  where <processor> is imx8qm, imx6q, imx28, imx53, imx35, imx25, p1010,
> +  vf610, ls1021ar2, lx2160ar1, ls1028ar1.
> +
> +  The ls1028ar1 must be followed by lx2160ar1, e.g.
> +   - "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"
> +
>    An implementation should also claim any of the following compatibles
>    that it is fully backwards compatible with:
>  
> 

Added this patch to linux-can-next. The others should probably go via the arm
SoC tree.

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

WARNING: multiple messages have this Message-ID (diff)
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Michael Walle <michael@walle.cc>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-can@vger.kernel.org
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
	Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	Joakim Zhang <qiangqing.zhang@nxp.com>,
	Li Yang <leoyang.li@nxp.com>
Subject: Re: [PATCH v2 1/3] dt-bindings: can: flexcan: list supported processors
Date: Tue, 6 Oct 2020 21:25:09 +0200	[thread overview]
Message-ID: <afdcecef-10c6-738b-29fe-09353d1c7c92@pengutronix.de> (raw)
In-Reply-To: <20201001091131.30514-2-michael@walle.cc>


[-- Attachment #1.1.1: Type: text/plain, Size: 1530 bytes --]

On 10/1/20 11:11 AM, Michael Walle wrote:
> The compatible is a pattern match. Explicitly list all possible values.
> Also mention that the ls1028ar1 must be followed by lx2160ar1.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
>  Documentation/devicetree/bindings/net/can/fsl-flexcan.txt | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> index 94c0f8bf4deb..c6152dc2d2d0 100644
> --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> @@ -4,6 +4,12 @@ Required properties:
>  
>  - compatible : Should be "fsl,<processor>-flexcan"
>  
> +  where <processor> is imx8qm, imx6q, imx28, imx53, imx35, imx25, p1010,
> +  vf610, ls1021ar2, lx2160ar1, ls1028ar1.
> +
> +  The ls1028ar1 must be followed by lx2160ar1, e.g.
> +   - "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"
> +
>    An implementation should also claim any of the following compatibles
>    that it is fully backwards compatible with:
>  
> 

Added this patch to linux-can-next. The others should probably go via the arm
SoC tree.

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-10-06 19:25 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-01  9:11 [PATCH v2 0/3] arm64: dts: add FlexCAN support to LS1028A and sl28 Michael Walle
2020-10-01  9:11 ` Michael Walle
2020-10-01  9:11 ` [PATCH v2 1/3] dt-bindings: can: flexcan: list supported processors Michael Walle
2020-10-01  9:11   ` Michael Walle
2020-10-06 19:25   ` Marc Kleine-Budde [this message]
2020-10-06 19:25     ` Marc Kleine-Budde
2020-10-01  9:11 ` [PATCH v2 2/3] arm64: dts: ls1028a: add missing CAN nodes Michael Walle
2020-10-01  9:11   ` Michael Walle
2020-10-28  9:06   ` Shawn Guo
2020-10-28  9:06     ` Shawn Guo
2020-10-01  9:11 ` [PATCH v2 3/3] arm64: dts: freescale: sl28: add CAN node Michael Walle
2020-10-01  9:11   ` Michael Walle
2020-10-28  9:06   ` Shawn Guo
2020-10-28  9:06     ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=afdcecef-10c6-738b-29fe-09353d1c7c92@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=devicetree@vger.kernel.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael@walle.cc \
    --cc=o.rempel@pengutronix.de \
    --cc=qiangqing.zhang@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.