* [U-Boot] [PATCH] tools: imx8m_image: Fix 'unexpected operator' error
@ 2019-04-03 14:37 Carlo Caione
2019-04-03 14:56 ` Anatolij Gustschin
0 siblings, 1 reply; 6+ messages in thread
From: Carlo Caione @ 2019-04-03 14:37 UTC (permalink / raw)
To: u-boot
When sh is an alias for dash the script is failing with (for several
files):
./tools/imx8m_image.sh: 15: [: signed_hdmi_imx8m.bin: unexpected operator
This is caused by the 'a == b' bashism that should be 'a = b'.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
---
tools/imx8m_image.sh | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/imx8m_image.sh b/tools/imx8m_image.sh
index 6346fb64d8..ec0881a128 100755
--- a/tools/imx8m_image.sh
+++ b/tools/imx8m_image.sh
@@ -12,7 +12,7 @@ blobs=`awk '/^SIGNED_HDMI/ {print $2} /^LOADER/ {print $2} /^SECOND_LOADER/ {pri
for f in $blobs; do
tmp=$srctree/$f
- if [ $f == "spl/u-boot-spl-ddr.bin" ] || [ $f == "u-boot.itb" ]; then
+ if [ $f = "spl/u-boot-spl-ddr.bin" ] || [ $f = "u-boot.itb" ]; then
continue
fi
@@ -28,7 +28,7 @@ for f in $blobs; do
sed -in "s;$f;$tmp;" $file
done
-if [ $post_process == 1 ]; then
+if [ $post_process = 1 ]; then
if [ -f $srctree/lpddr4_pmu_train_1d_imem.bin ]; then
objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 $srctree/lpddr4_pmu_train_1d_imem.bin lpddr4_pmu_train_1d_imem_pad.bin
objcopy -I binary -O binary --pad-to 0x4000 --gap-fill=0x0 $srctree/lpddr4_pmu_train_1d_dmem.bin lpddr4_pmu_train_1d_dmem_pad.bin
--
2.20.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] tools: imx8m_image: Fix 'unexpected operator' error
2019-04-03 14:37 [U-Boot] [PATCH] tools: imx8m_image: Fix 'unexpected operator' error Carlo Caione
@ 2019-04-03 14:56 ` Anatolij Gustschin
2019-04-03 15:01 ` Carlo Caione
2019-04-03 15:07 ` Stefano Babic
0 siblings, 2 replies; 6+ messages in thread
From: Anatolij Gustschin @ 2019-04-03 14:56 UTC (permalink / raw)
To: u-boot
Hi Carlo,
On Wed, 3 Apr 2019 15:37:20 +0100
Carlo Caione ccaione at baylibre.com wrote:
> When sh is an alias for dash the script is failing with (for several
> files):
>
> ./tools/imx8m_image.sh: 15: [: signed_hdmi_imx8m.bin: unexpected operator
Thanks, but there is already a similar patch [1] waiting for merging.
It already passed the build tests and I assume that Stefano will submit
a pull request soon for inclusion in v2019.04.
[1] http://patchwork.ozlabs.org/patch/1019908
--
Anatolij
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] tools: imx8m_image: Fix 'unexpected operator' error
2019-04-03 14:56 ` Anatolij Gustschin
@ 2019-04-03 15:01 ` Carlo Caione
2019-04-03 15:07 ` Stefano Babic
1 sibling, 0 replies; 6+ messages in thread
From: Carlo Caione @ 2019-04-03 15:01 UTC (permalink / raw)
To: u-boot
On 03/04/2019 15:56, Anatolij Gustschin wrote:
> Hi Carlo,
>
> On Wed, 3 Apr 2019 15:37:20 +0100
> Carlo Caione ccaione at baylibre.com wrote:
>
>> When sh is an alias for dash the script is failing with (for several
>> files):
>>
>> ./tools/imx8m_image.sh: 15: [: signed_hdmi_imx8m.bin: unexpected operator
>
> Thanks, but there is already a similar patch [1] waiting for merging.
> It already passed the build tests and I assume that Stefano will submit
> a pull request soon for inclusion in v2019.04.
>
> [1] http://patchwork.ozlabs.org/patch/1019908
Oh well, good to know.
Cheers,
--
Carlo Caione
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] tools: imx8m_image: Fix 'unexpected operator' error
2019-04-03 14:56 ` Anatolij Gustschin
2019-04-03 15:01 ` Carlo Caione
@ 2019-04-03 15:07 ` Stefano Babic
2019-04-04 8:29 ` Anatolij Gustschin
1 sibling, 1 reply; 6+ messages in thread
From: Stefano Babic @ 2019-04-03 15:07 UTC (permalink / raw)
To: u-boot
On 03/04/19 16:56, Anatolij Gustschin wrote:
> Hi Carlo,
>
> On Wed, 3 Apr 2019 15:37:20 +0100
> Carlo Caione ccaione at baylibre.com wrote:
>
>> When sh is an alias for dash the script is failing with (for several
>> files):
>>
>> ./tools/imx8m_image.sh: 15: [: signed_hdmi_imx8m.bin: unexpected operator
>
> Thanks, but there is already a similar patch [1] waiting for merging.
> It already passed the build tests and I assume that Stefano will submit
> a pull request soon for inclusion in v2019.04.
>
> [1] http://patchwork.ozlabs.org/patch/1019908
>
> --
Yes, it is in u-boot-imx, I am just checking around if there are some
other patches that cannot wait and must go into 2019.04. I plan to send
my PR to Tom for the end of the week.
Regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] tools: imx8m_image: Fix 'unexpected operator' error
2019-04-03 15:07 ` Stefano Babic
@ 2019-04-04 8:29 ` Anatolij Gustschin
2019-04-04 9:00 ` Stefano Babic
0 siblings, 1 reply; 6+ messages in thread
From: Anatolij Gustschin @ 2019-04-04 8:29 UTC (permalink / raw)
To: u-boot
Hi Stefano,
On Wed, 3 Apr 2019 17:07:04 +0200
Stefano Babic sbabic at denx.de wrote:
...
> Yes, it is in u-boot-imx, I am just checking around if there are some
> other patches that cannot wait and must go into 2019.04. I plan to send
> my PR to Tom for the end of the week.
Then you probably can apply two tested patches with FEC fixes for
i.mx8qxp MEK?
http://patchwork.ozlabs.org/patch/1050177
http://patchwork.ozlabs.org/patch/1050178
These were part of the last u-boot-net pull request, but this pull
request was rejected due to issues with other patches, so we still
have broken Ethernet support on MEK board.
Thanks!
--
Anatolij
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] tools: imx8m_image: Fix 'unexpected operator' error
2019-04-04 8:29 ` Anatolij Gustschin
@ 2019-04-04 9:00 ` Stefano Babic
0 siblings, 0 replies; 6+ messages in thread
From: Stefano Babic @ 2019-04-04 9:00 UTC (permalink / raw)
To: u-boot
Hi Anatolji,
On 04/04/19 10:29, Anatolij Gustschin wrote:
> Hi Stefano,
>
> On Wed, 3 Apr 2019 17:07:04 +0200
> Stefano Babic sbabic at denx.de wrote:
> ...
>> Yes, it is in u-boot-imx, I am just checking around if there are some
>> other patches that cannot wait and must go into 2019.04. I plan to send
>> my PR to Tom for the end of the week.
>
> Then you probably can apply two tested patches with FEC fixes for
> i.mx8qxp MEK?
>
> http://patchwork.ozlabs.org/patch/1050177
> http://patchwork.ozlabs.org/patch/1050178
>
> These were part of the last u-boot-net pull request, but this pull
> request was rejected due to issues with other patches, so we still
> have broken Ethernet support on MEK board.
>
I can do it if Joe agree because after merging in u-boot-imx, he needs
to rebase his tree. Joe, what do you mind ?
> Thanks!
>
Regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-04-04 9:00 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-03 14:37 [U-Boot] [PATCH] tools: imx8m_image: Fix 'unexpected operator' error Carlo Caione
2019-04-03 14:56 ` Anatolij Gustschin
2019-04-03 15:01 ` Carlo Caione
2019-04-03 15:07 ` Stefano Babic
2019-04-04 8:29 ` Anatolij Gustschin
2019-04-04 9:00 ` Stefano Babic
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.