[Bug 204807] Hardware monitoring sensor nct6798d doesn't work unless acpi_enforce_resources=lax is enabled

[bugzilla-daemon@bugzilla.kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=204807

--- Comment #109 from Jonathan (greenbigfrog@gmail.com) ---
Created attachment 298799
  --> https://bugzilla.kernel.org/attachment.cgi?id=298799&action=edit
dmesg for boot with Denis's patch applied

(In reply to Jonathan from comment #106)
> (In reply to Denis Pauk from comment #105)
> > (In reply to Jonathan from comment #103)
> > > Hi,
> > > (oh. Could've put my comment in the attachment comment... duh)
> > > I applied Denis Pauk patch today, (how I did it described in
> > > https://gist.github.com/greenbigfrog/26f948c9d86f1cb2fd23bfeaa23ca068 ).
> > > While I'm not sure if I did everything correctly, I can see nct6775
> pulling
> > > in the wmi module now, so I'm fairly certain I'm running the patch.
> > > And yet I'm somehow still getting the acpi access warning, and no further
> > > sensor output.
> > > Did I do something wrong?
> > > 
> > > System: Asus TUF Gaming X570-Plus (Wi-Fi) with 5600X
> > 
> > Could you please check with original patch from Bernhard Seibold?
> > And check what is value in "/sys/class/dmi/id/board_name" ?
> 
> Sure. I'll try the "original" patch tomorrow.
> 
> ```
> cat /sys/class/dmi/id/board_name                                            
> 
> TUF GAMING X570-PLUS (WI-FI)
> ```

I've tested both patches now. I had trouble getting Bernhard's to run via dkms,
so I built a custom kernel. Worked flawlessly afterwards.
Out of fairness (since I'm really not that sure if my dkms attempts yesterday
actually worked), I also built a kernel with Denis's patch. Didn't change much.
I've attached dmesg for Denis's patch.

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.