[Bug 204807] Hardware monitoring sensor nct6798d doesn't work unless acpi_enforce_resources=lax is enabled - bugzilla-daemon

From: bugzilla-daemon@bugzilla.kernel.org
To: platform-driver-x86@vger.kernel.org
Subject: [Bug 204807] Hardware monitoring sensor nct6798d doesn't work unless acpi_enforce_resources=lax is enabled
Date: Sun, 07 Nov 2021 16:20:36 +0000	[thread overview]
Message-ID: <bug-204807-215701-VkqzsXRI9j@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-204807-215701@https.bugzilla.kernel.org/>

https://bugzilla.kernel.org/show_bug.cgi?id=204807

--- Comment #161 from Olli Asikainen (olli.asikainen@gmail.com) ---
(In reply to Denis Pauk from comment #159)
> Created attachment 299483 [details]
> Check MAXIMUS_VII_HERO by lock mutex directly
> 
> (In reply to Olli Asikainen from comment #151)
> > Created attachment 299459 [details]
> > acpidump -b -n DSDT
> 
> Could you check with updated patch? It has only nct6798d part and only for
> check idea.

It works! (as far as I can tell)

[    5.109607] nct6775: Using Asus WMI mutex.
[    5.109633] nct6775: Enabling hardware monitor logical device mappings.
[    5.109641] nct6775: Found NCT6791D or compatible chip at 0x2e:0x290

nct6791-isa-0290
Adapter: ISA adapter
Vcore:                 928.00 mV (min =  +0.00 V, max =  +1.74 V)
in1:                   1000.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
AVCC:                    3.31 V  (min =  +2.98 V, max =  +3.63 V)
+3.3V:                   3.31 V  (min =  +2.98 V, max =  +3.63 V)
in4:                   1000.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                     1.94 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                     0.00 V  (min =  +0.00 V, max =  +0.00 V)
3VSB:                    3.42 V  (min =  +2.98 V, max =  +3.63 V)
Vbat:                    3.30 V  (min =  +2.70 V, max =  +3.63 V)
in9:                     1.01 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                    0.00 V  (min =  +0.00 V, max =  +0.00 V)
in11:                  936.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                    0.00 V  (min =  +0.00 V, max =  +0.00 V)
in13:                    8.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                    8.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                     0 RPM  (min =    0 RPM)
fan2:                     0 RPM  (min =    0 RPM)
fan3:                     0 RPM  (min =    0 RPM)
fan4:                     0 RPM  (min =    0 RPM)
fan5:                     0 RPM  (min =    0 RPM)
fan6:                     0 RPM  (min =    0 RPM)
SYSTIN:                 +28.0°C  (high =  +0.0°C, hyst =  +0.0°C)  ALARM 
sensor = thermistor
CPUTIN:                 +30.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor =
thermistor
AUXTIN0:               -128.0°C    sensor = thermistor
AUXTIN1:               -128.0°C    sensor = thermistor
AUXTIN2:                +29.0°C    sensor = thermistor
AUXTIN3:               +127.0°C    sensor = thermistor
PECI Agent 0:           +30.0°C
PCH_CHIP_CPU_MAX_TEMP:   +0.0°C
PCH_CHIP_TEMP:           +0.0°C
PCH_CPU_TEMP:            +0.0°C
intrusion0:            ALARM
intrusion1:            ALARM
beep_enable:           disabled

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.