* [Qemu-devel] [PATCH 1/3] Do not link usermode targets with libhw*.a
@ 2009-09-11 23:17 Kirill A. Shutemov
2009-09-11 23:17 ` [Qemu-devel] [PATCH 2/3] Fix text relocations in linux-user targets Kirill A. Shutemov
0 siblings, 1 reply; 7+ messages in thread
From: Kirill A. Shutemov @ 2009-09-11 23:17 UTC (permalink / raw)
To: qemu-devel; +Cc: Kirill A. Shutemov
Usermode targets are hardware-independed.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: Juan Quintela <quintela@redhat.com>
---
configure | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/configure b/configure
index 5232172..1ecb1ab 100755
--- a/configure
+++ b/configure
@@ -2207,15 +2207,15 @@ case "$target_arch2" in
echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak
fi
esac
-echo "HWLIB=../libhw$target_phys_bits/libqemuhw$target_phys_bits.a" >> $config_mak
echo "TARGET_PHYS_ADDR_BITS=$target_phys_bits" >> $config_mak
-echo "subdir-$target: subdir-libhw$target_phys_bits" >> $config_host_mak
if test "$target_bigendian" = "yes" ; then
echo "TARGET_WORDS_BIGENDIAN=y" >> $config_mak
fi
if test "$target_softmmu" = "yes" ; then
echo "CONFIG_SOFTMMU=y" >> $config_mak
echo "LIBS+=$libs_softmmu" >> $config_mak
+ echo "HWLIB=../libhw$target_phys_bits/libqemuhw$target_phys_bits.a" >> $config_mak
+ echo "subdir-$target: subdir-libhw$target_phys_bits" >> $config_host_mak
fi
if test "$target_user_only" = "yes" ; then
echo "CONFIG_USER_ONLY=y" >> $config_mak
--
1.6.4.2
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [Qemu-devel] [PATCH 2/3] Fix text relocations in linux-user targets
2009-09-11 23:17 [Qemu-devel] [PATCH 1/3] Do not link usermode targets with libhw*.a Kirill A. Shutemov
@ 2009-09-11 23:17 ` Kirill A. Shutemov
2009-09-11 23:17 ` [Qemu-devel] [PATCH 3/3] Add configure option to compile user targets as PIE Kirill A. Shutemov
0 siblings, 1 reply; 7+ messages in thread
From: Kirill A. Shutemov @ 2009-09-11 23:17 UTC (permalink / raw)
To: qemu-devel; +Cc: Kirill A. Shutemov
There is a link hack in linux-user which produces an executable that
looks like PIE, but always has text relocations since all object files
isn't position-independent (compiled without -fpic/-fpie). Dynamic loader
has to do more work to load a binary with text relocations.
The best way to keep this functionality is to build a true PIE without
text relocations.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
---
configure | 12 +-----------
linux-user/main.c | 26 --------------------------
2 files changed, 1 insertions(+), 37 deletions(-)
diff --git a/configure b/configure
index 1ecb1ab..b2f52b2 100755
--- a/configure
+++ b/configure
@@ -2357,16 +2357,6 @@ fi
linker_script="-Wl,-T../config-host.ld -Wl,-T,\$(SRC_PATH)/\$(ARCH).ld"
if test "$target_linux_user" = "yes" -o "$target_bsd_user" = "yes" ; then
case "$ARCH" in
- i386)
- if test "$gprof" = "yes" -o "$static" = "yes" ; then
- ldflags="$linker_script $ldflags"
- else
- # WARNING: this LDFLAGS is _very_ tricky : qemu is an ELF shared object
- # that the kernel ELF loader considers as an executable. I think this
- # is the simplest way to make it self virtualizable!
- ldflags="-Wl,-shared $ldflags"
- fi
- ;;
sparc)
# -static is used to avoid g1/g3 usage by the dynamic linker
ldflags="$linker_script -static $ldflags"
@@ -2374,7 +2364,7 @@ if test "$target_linux_user" = "yes" -o "$target_bsd_user" = "yes" ; then
ia64)
ldflags="-Wl,-G0 $linker_script -static $ldflags"
;;
- x86_64|ppc|ppc64|s390|sparc64|alpha|arm|m68k|mips|mips64)
+ i386|x86_64|ppc|ppc64|s390|sparc64|alpha|arm|m68k|mips|mips64)
ldflags="$linker_script $ldflags"
;;
esac
diff --git a/linux-user/main.c b/linux-user/main.c
index a628c01..81a1ada 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -48,32 +48,6 @@ int have_guest_base;
static const char *interp_prefix = CONFIG_QEMU_PREFIX;
const char *qemu_uname_release = CONFIG_UNAME_RELEASE;
-#if defined(__i386__) && !defined(CONFIG_STATIC)
-/* Force usage of an ELF interpreter even if it is an ELF shared
- object ! */
-const char interp[] __attribute__((section(".interp"))) = "/lib/ld-linux.so.2";
-#endif
-
-/* for recent libc, we add these dummy symbols which are not declared
- when generating a linked object (bug in ld ?) */
-#if (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 3)) && !defined(CONFIG_STATIC)
-asm(".globl __preinit_array_start\n"
- ".globl __preinit_array_end\n"
- ".globl __init_array_start\n"
- ".globl __init_array_end\n"
- ".globl __fini_array_start\n"
- ".globl __fini_array_end\n"
- ".section \".rodata\"\n"
- "__preinit_array_start:\n"
- "__preinit_array_end:\n"
- "__init_array_start:\n"
- "__init_array_end:\n"
- "__fini_array_start:\n"
- "__fini_array_end:\n"
- ".long 0\n"
- ".previous\n");
-#endif
-
/* XXX: on x86 MAP_GROWSDOWN only works if ESP <= address + 32, so
we allocate a bigger stack. Need a better solution, for example
by remapping the process stack directly at the right place */
--
1.6.4.2
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [Qemu-devel] [PATCH 3/3] Add configure option to compile user targets as PIE
2009-09-11 23:17 ` [Qemu-devel] [PATCH 2/3] Fix text relocations in linux-user targets Kirill A. Shutemov
@ 2009-09-11 23:17 ` Kirill A. Shutemov
2009-09-12 9:57 ` Blue Swirl
0 siblings, 1 reply; 7+ messages in thread
From: Kirill A. Shutemov @ 2009-09-11 23:17 UTC (permalink / raw)
To: qemu-devel; +Cc: Kirill A. Shutemov
Build uset targers as true PIE if user want to keep qemu
self-virtualizable.
v5:
- Split into to patches: drop link hack and add PIE support
- do not build PIE by default and drop toolchain check
v4:
- Add test for toolchain if it has proper PIE support
v3:
- One more pice of the hack was removed
- Description updated
v2:
- Add configure options do enable/disable PIE for usermode targets.
Disabling can be useful if you build uswing toolchain which has
broken PIE support. PIE for usermode targets enabled by default.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
---
Makefile | 10 +---------
Makefile.target | 19 +++++++++++++++----
configure | 14 ++++++++++++++
3 files changed, 30 insertions(+), 13 deletions(-)
diff --git a/Makefile b/Makefile
index cb2614b..b1de39a 100644
--- a/Makefile
+++ b/Makefile
@@ -39,8 +39,6 @@ subdir-%:
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" all,)
$(filter %-softmmu,$(SUBDIR_RULES)): libqemu_common.a
-$(filter %-user,$(SUBDIR_RULES)): libqemu_user.a
-
ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS))
romsubdir-%:
@@ -74,7 +72,7 @@ block-obj-y += $(addprefix block/, $(block-nested-y))
# CPUs and machines.
obj-y = $(block-obj-y)
-obj-y += readline.o console.o host-utils.o
+obj-y += readline.o console.o
obj-y += irq.o ptimer.o
obj-y += i2c.o smbus.o smbus_eeprom.o max7310.o max111x.o wm8750.o
@@ -162,12 +160,6 @@ bt-host.o: QEMU_CFLAGS += $(BLUEZ_CFLAGS)
libqemu_common.a: $(obj-y)
-#######################################################################
-# user-obj-y is code used by qemu userspace emulation
-user-obj-y = cutils.o cache-utils.o path.o envlist.o host-utils.o
-
-libqemu_user.a: $(user-obj-y)
-
######################################################################
qemu-img.o: qemu-img-cmds.h
diff --git a/Makefile.target b/Makefile.target
index 0fe8b6a..6314e0e 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -31,7 +31,7 @@ all: $(PROGS)
#########################################################
# cpu emulator library
-libobj-y = exec.o translate-all.o cpu-exec.o translate.o
+libobj-y = exec.o translate-all.o cpu-exec.o translate.o host-utils.o
libobj-y += tcg/tcg.o tcg/tcg-runtime.o
libobj-$(CONFIG_SOFTFLOAT) += fpu/softfloat.o
libobj-$(CONFIG_NOSOFTFLOAT) += fpu/softfloat-native.o
@@ -80,9 +80,9 @@ ifdef CONFIG_LINUX_USER
VPATH+=:$(SRC_PATH)/linux-user:$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR)
QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user -I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR)
-
obj-y = main.o syscall.o strace.o mmap.o signal.o thunk.o \
elfload.o linuxload.o uaccess.o gdbstub.o gdbstub-xml.o
+obj-y += envlist.o path.o
obj-$(TARGET_HAS_BFLT) += flatload.o
obj-$(TARGET_HAS_ELFLOAD32) += elfload32.o
@@ -98,7 +98,7 @@ obj-arm-y += arm-semi.o
obj-m68k-y += m68k-sim.o m68k-semi.o
-ARLIBS=../libqemu_user.a libqemu.a
+ARLIBS=libqemu.a
endif #CONFIG_LINUX_USER
#########################################################
@@ -116,6 +116,7 @@ LIBS+=-lmx
obj-y = main.o commpage.o machload.o mmap.o signal.o syscall.o thunk.o \
gdbstub.o gdbstub-xml.o
+obj-y += envlist.o path.o
obj-i386-y += ioport-user.o
@@ -133,13 +134,23 @@ QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ARCH)
obj-y = main.o bsdload.o elfload.o mmap.o signal.o strace.o syscall.o \
gdbstub.o gdbstub-xml.o uaccess.o
+obj-y += envlist.o path.o
obj-i386-y += ioport-user.o
-ARLIBS=libqemu.a ../libqemu_user.a
+ARLIBS=libqemu.a
endif #CONFIG_BSD_USER
+ifdef CONFIG_USER_ONLY
+# hack to compile with -fpie for *-user targets
+obj-y += cutils-user.o cache-utils-user.o
+cutils-user.c cache-utils-user.c:
+ @echo " LN $(TARGET_DIR)$@"
+ @ln -s $(SRC_PATH)/$(@:%-user.c=%.c) $@
+endif
+
+
#########################################################
# System emulator target
ifdef CONFIG_SOFTMMU
diff --git a/configure b/configure
index b2f52b2..6b54c63 100755
--- a/configure
+++ b/configure
@@ -222,6 +222,7 @@ aix="no"
blobs="yes"
pkgversion=""
check_utests="no"
+user_pie="no"
# OS specific
if check_define __linux__ ; then
@@ -499,6 +500,10 @@ for opt do
;;
--disable-guest-base) guest_base="no"
;;
+ --enable-user-pie) user_pie="yes"
+ ;;
+ --disable-user-pie) user_pie="no"
+ ;;
--enable-uname-release=*) uname_release="$optarg"
;;
--sparc_cpu=*)
@@ -679,6 +684,8 @@ echo " --disable-bsd-user disable all BSD usermode emulation targets"
echo " --enable-guest-base enable GUEST_BASE support for usermode"
echo " emulation targets"
echo " --disable-guest-base disable GUEST_BASE support"
+echo " --enable-user-pie build usermode emulation targets as PIE"
+echo " --disable-user-pie do not build usermode emulation targets as PIE"
echo " --fmod-lib path to FMOD library"
echo " --fmod-inc path to FMOD includes"
echo " --oss-lib path to OSS library"
@@ -1707,6 +1714,7 @@ echo "Documentation $docs"
echo "uname -r $uname_release"
echo "NPTL support $nptl"
echo "GUEST_BASE $guest_base"
+echo "PIE user targets $user_pie"
echo "vde support $vde"
echo "IO thread $io_thread"
echo "Linux AIO support $linux_aio"
@@ -2336,6 +2344,12 @@ if test "$target_softmmu" = "yes" ; then
esac
fi
+if test "$target_user_only" = "yes" -a "$static" = "no" -a \
+ "$user_pie" = "yes" ; then
+ cflags="-fpie $cflags"
+ ldflags="-pie $ldflags"
+fi
+
if test "$target_softmmu" = "yes" -a \( \
"$TARGET_ARCH" = "microblaze" -o \
"$TARGET_ARCH" = "cris" \) ; then
--
1.6.4.2
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] [PATCH 3/3] Add configure option to compile user targets as PIE
2009-09-11 23:17 ` [Qemu-devel] [PATCH 3/3] Add configure option to compile user targets as PIE Kirill A. Shutemov
@ 2009-09-12 9:57 ` Blue Swirl
2009-09-12 12:18 ` Kirill A. Shutemov
0 siblings, 1 reply; 7+ messages in thread
From: Blue Swirl @ 2009-09-12 9:57 UTC (permalink / raw)
To: Kirill A. Shutemov; +Cc: qemu-devel
On Sat, Sep 12, 2009 at 2:17 AM, Kirill A. Shutemov
<kirill@shutemov.name> wrote:
> Build uset targers as true PIE if user want to keep qemu
> self-virtualizable.
With PIE enabled, I get the following error:
LINK ppc-linux-user/qemu-ppc
/usr/bin/ld: main.o: relocation R_X86_64_TPOFF32 against `thread_env'
can not be used when making a shared object; recompile with -fPIC
main.o: could not read symbols: Bad value
collect2: ld returned 1 exit status
Maybe -fPIC should be used as well?
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] [PATCH 3/3] Add configure option to compile user targets as PIE
2009-09-12 9:57 ` Blue Swirl
@ 2009-09-12 12:18 ` Kirill A. Shutemov
2009-09-12 13:01 ` Blue Swirl
0 siblings, 1 reply; 7+ messages in thread
From: Kirill A. Shutemov @ 2009-09-12 12:18 UTC (permalink / raw)
To: Blue Swirl; +Cc: qemu-devel
On Sat, Sep 12, 2009 at 12:57 PM, Blue Swirl <blauwirbel@gmail.com> wrote:
> On Sat, Sep 12, 2009 at 2:17 AM, Kirill A. Shutemov
> <kirill@shutemov.name> wrote:
>> Build uset targers as true PIE if user want to keep qemu
>> self-virtualizable.
>
> With PIE enabled, I get the following error:
> LINK ppc-linux-user/qemu-ppc
> /usr/bin/ld: main.o: relocation R_X86_64_TPOFF32 against `thread_env'
> can not be used when making a shared object; recompile with -fPIC
> main.o: could not read symbols: Bad value
> collect2: ld returned 1 exit status
>
> Maybe -fPIC should be used as well?
>
Your binutils(fedora, I guess) is buggy. Please apply this patch or do
not enable PIE:
http://git.altlinux.org/people/kas/packages/binutils.git?p=binutils.git;a=blob;f=binutils-2.19.51.0.14-alt-tls-pie.patch
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] [PATCH 3/3] Add configure option to compile user targets as PIE
2009-09-12 12:18 ` Kirill A. Shutemov
@ 2009-09-12 13:01 ` Blue Swirl
2009-09-12 13:11 ` Kirill A. Shutemov
0 siblings, 1 reply; 7+ messages in thread
From: Blue Swirl @ 2009-09-12 13:01 UTC (permalink / raw)
To: Kirill A. Shutemov; +Cc: qemu-devel
On Sat, Sep 12, 2009 at 3:18 PM, Kirill A. Shutemov
<kirill@shutemov.name> wrote:
> On Sat, Sep 12, 2009 at 12:57 PM, Blue Swirl <blauwirbel@gmail.com> wrote:
>> On Sat, Sep 12, 2009 at 2:17 AM, Kirill A. Shutemov
>> <kirill@shutemov.name> wrote:
>>> Build uset targers as true PIE if user want to keep qemu
>>> self-virtualizable.
>>
>> With PIE enabled, I get the following error:
>> LINK ppc-linux-user/qemu-ppc
>> /usr/bin/ld: main.o: relocation R_X86_64_TPOFF32 against `thread_env'
>> can not be used when making a shared object; recompile with -fPIC
>> main.o: could not read symbols: Bad value
>> collect2: ld returned 1 exit status
>>
>> Maybe -fPIC should be used as well?
>>
>
> Your binutils(fedora, I guess) is buggy. Please apply this patch or do
> not enable PIE:
> http://git.altlinux.org/people/kas/packages/binutils.git?p=binutils.git;a=blob;f=binutils-2.19.51.0.14-alt-tls-pie.patch
>
Looks like a very recent fix (< 2 months). Can we expect that the
builders already have the fixed version? Maybe the PIE toolchain check
should be restored?
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] [PATCH 3/3] Add configure option to compile user targets as PIE
2009-09-12 13:01 ` Blue Swirl
@ 2009-09-12 13:11 ` Kirill A. Shutemov
0 siblings, 0 replies; 7+ messages in thread
From: Kirill A. Shutemov @ 2009-09-12 13:11 UTC (permalink / raw)
To: Blue Swirl; +Cc: qemu-devel
On Sat, Sep 12, 2009 at 4:01 PM, Blue Swirl <blauwirbel@gmail.com> wrote:
> On Sat, Sep 12, 2009 at 3:18 PM, Kirill A. Shutemov
> <kirill@shutemov.name> wrote:
>> On Sat, Sep 12, 2009 at 12:57 PM, Blue Swirl <blauwirbel@gmail.com> wrote:
>>> On Sat, Sep 12, 2009 at 2:17 AM, Kirill A. Shutemov
>>> <kirill@shutemov.name> wrote:
>>>> Build uset targers as true PIE if user want to keep qemu
>>>> self-virtualizable.
>>>
>>> With PIE enabled, I get the following error:
>>> LINK ppc-linux-user/qemu-ppc
>>> /usr/bin/ld: main.o: relocation R_X86_64_TPOFF32 against `thread_env'
>>> can not be used when making a shared object; recompile with -fPIC
>>> main.o: could not read symbols: Bad value
>>> collect2: ld returned 1 exit status
>>>
>>> Maybe -fPIC should be used as well?
>>>
>>
>> Your binutils(fedora, I guess) is buggy. Please apply this patch or do
>> not enable PIE:
>> http://git.altlinux.org/people/kas/packages/binutils.git?p=binutils.git;a=blob;f=binutils-2.19.51.0.14-alt-tls-pie.patch
>>
>
> Looks like a very recent fix (< 2 months). Can we expect that the
> builders already have the fixed version?
This is a regression, so I guess most of distributions have sane binutils,
except distributions which use fedora-based binutils(like ALT Linux).
> Maybe the PIE toolchain check should be restored?
Binutils(and other part of toolchain) can be broken in many ways. Provide
test for every possible bug is overkill for qemu.
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2009-09-12 13:12 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-09-11 23:17 [Qemu-devel] [PATCH 1/3] Do not link usermode targets with libhw*.a Kirill A. Shutemov
2009-09-11 23:17 ` [Qemu-devel] [PATCH 2/3] Fix text relocations in linux-user targets Kirill A. Shutemov
2009-09-11 23:17 ` [Qemu-devel] [PATCH 3/3] Add configure option to compile user targets as PIE Kirill A. Shutemov
2009-09-12 9:57 ` Blue Swirl
2009-09-12 12:18 ` Kirill A. Shutemov
2009-09-12 13:01 ` Blue Swirl
2009-09-12 13:11 ` Kirill A. Shutemov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.