All of lore.kernel.org
 help / color / mirror / Atom feed
From: Joe Perches <joe@perches.com>
To: Valery Ivanov <ivalery111@gmail.com>,
	rspringer@google.com, toddpoynor@google.com,
	benchan@chromium.org, Simon Que <sque@chromium.org>,
	John Joseph <jnjoseph@google.com>
Cc: gregkh@linuxfoundation.org, devel@driverdev.osuosl.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] staging: gasket: gasket_ioctl: Remove unnecessary line-breaks in funtion signature
Date: Wed, 06 Nov 2019 11:12:09 -0800	[thread overview]
Message-ID: <e3ee9e75d7c25e2d25b74fd1d4709f8dacb79efc.camel@perches.com> (raw)
In-Reply-To: <20191106180821.GA19385@hwsrv-485799.hostwindsdns.com>

On Wed, 2019-11-06 at 18:08 +0000, Valery Ivanov wrote:
> 	This patch fix the function signature for trace_gasket_ioctl_page_table_data
> 	to avoid the checkpatch.pl warning:
> 
> 		CHECK: Lines should not end with a '('
> 
> Signed-off-by: Valery Ivanov <ivalery111@gmail.com>

All of this stuff is no-op and could just as easily be removed
completely as GASKET_KERNEL_TRACE_SUPPORT is not #defined anywhere.

Is the actual trace #include file supposed to be available somewhere?

#ifdef GASKET_KERNEL_TRACE_SUPPORT
#define CREATE_TRACE_POINTS
#include <trace/events/gasket_ioctl.h>
#else
#define trace_gasket_ioctl_entry(x, ...)
#define trace_gasket_ioctl_exit(x)
#define trace_gasket_ioctl_integer_data(x)
#define trace_gasket_ioctl_eventfd_data(x, ...)
#define trace_gasket_ioctl_page_table_data(x, ...)
#define trace_gasket_ioctl_config_coherent_allocator(x, ...)
#endif

trace file not found...

> ---
>  drivers/staging/gasket/gasket_ioctl.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/staging/gasket/gasket_ioctl.c b/drivers/staging/gasket/gasket_ioctl.c
> index 240f9bb..55cb6b1 100644
> --- a/drivers/staging/gasket/gasket_ioctl.c
> +++ b/drivers/staging/gasket/gasket_ioctl.c
> @@ -54,9 +54,10 @@ static int gasket_read_page_table_size(struct gasket_dev *gasket_dev,
>  	ibuf.size = gasket_page_table_num_entries(
>  		gasket_dev->page_table[ibuf.page_table_index]);
>  
> -	trace_gasket_ioctl_page_table_data(
> -		ibuf.page_table_index, ibuf.size, ibuf.host_address,
> -		ibuf.device_address);
> +	trace_gasket_ioctl_page_table_data(ibuf.page_table_index,
> +					   ibuf.size,
> +					   ibuf.host_address,
> +					   ibuf.device_address);
>  
>  	if (copy_to_user(argp, &ibuf, sizeof(ibuf)))
>  		return -EFAULT;


WARNING: multiple messages have this Message-ID (diff)
From: Joe Perches <joe@perches.com>
To: Valery Ivanov <ivalery111@gmail.com>,
	rspringer@google.com,  toddpoynor@google.com,
	benchan@chromium.org, Simon Que <sque@chromium.org>,
	John Joseph <jnjoseph@google.com>
Cc: devel@driverdev.osuosl.org, gregkh@linuxfoundation.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] staging: gasket: gasket_ioctl: Remove unnecessary line-breaks in funtion signature
Date: Wed, 06 Nov 2019 11:12:09 -0800	[thread overview]
Message-ID: <e3ee9e75d7c25e2d25b74fd1d4709f8dacb79efc.camel@perches.com> (raw)
In-Reply-To: <20191106180821.GA19385@hwsrv-485799.hostwindsdns.com>

On Wed, 2019-11-06 at 18:08 +0000, Valery Ivanov wrote:
> 	This patch fix the function signature for trace_gasket_ioctl_page_table_data
> 	to avoid the checkpatch.pl warning:
> 
> 		CHECK: Lines should not end with a '('
> 
> Signed-off-by: Valery Ivanov <ivalery111@gmail.com>

All of this stuff is no-op and could just as easily be removed
completely as GASKET_KERNEL_TRACE_SUPPORT is not #defined anywhere.

Is the actual trace #include file supposed to be available somewhere?

#ifdef GASKET_KERNEL_TRACE_SUPPORT
#define CREATE_TRACE_POINTS
#include <trace/events/gasket_ioctl.h>
#else
#define trace_gasket_ioctl_entry(x, ...)
#define trace_gasket_ioctl_exit(x)
#define trace_gasket_ioctl_integer_data(x)
#define trace_gasket_ioctl_eventfd_data(x, ...)
#define trace_gasket_ioctl_page_table_data(x, ...)
#define trace_gasket_ioctl_config_coherent_allocator(x, ...)
#endif

trace file not found...

> ---
>  drivers/staging/gasket/gasket_ioctl.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/staging/gasket/gasket_ioctl.c b/drivers/staging/gasket/gasket_ioctl.c
> index 240f9bb..55cb6b1 100644
> --- a/drivers/staging/gasket/gasket_ioctl.c
> +++ b/drivers/staging/gasket/gasket_ioctl.c
> @@ -54,9 +54,10 @@ static int gasket_read_page_table_size(struct gasket_dev *gasket_dev,
>  	ibuf.size = gasket_page_table_num_entries(
>  		gasket_dev->page_table[ibuf.page_table_index]);
>  
> -	trace_gasket_ioctl_page_table_data(
> -		ibuf.page_table_index, ibuf.size, ibuf.host_address,
> -		ibuf.device_address);
> +	trace_gasket_ioctl_page_table_data(ibuf.page_table_index,
> +					   ibuf.size,
> +					   ibuf.host_address,
> +					   ibuf.device_address);
>  
>  	if (copy_to_user(argp, &ibuf, sizeof(ibuf)))
>  		return -EFAULT;

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

  reply	other threads:[~2019-11-06 19:12 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-06 18:08 [PATCH] staging: gasket: gasket_ioctl: Remove unnecessary line-breaks in funtion signature Valery Ivanov
2019-11-06 18:08 ` Valery Ivanov
2019-11-06 19:12 ` Joe Perches [this message]
2019-11-06 19:12   ` Joe Perches
2019-11-07 15:09   ` Greg KH
2019-11-07 15:09     ` Greg KH
2019-11-07 15:08 ` Greg KH
2019-11-07 15:08   ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e3ee9e75d7c25e2d25b74fd1d4709f8dacb79efc.camel@perches.com \
    --to=joe@perches.com \
    --cc=benchan@chromium.org \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=ivalery111@gmail.com \
    --cc=jnjoseph@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rspringer@google.com \
    --cc=sque@chromium.org \
    --cc=toddpoynor@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.