* [Buildroot] [buildroot 0000552]: File libpthread/linuxthreads/Makefile.in not found, causes buildroot to stop compiling
@ 2007-02-12 13:49 bugs at busybox.net
0 siblings, 0 replies; only message in thread
From: bugs at busybox.net @ 2007-02-12 13:49 UTC (permalink / raw)
To: buildroot
The following issue has been ASSIGNED.
======================================================================
http://busybox.net/bugs/view.php?id=552
======================================================================
Reported By: swolfgarten
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 552
Category: Architecture Specific
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
======================================================================
Date Submitted: 11-20-2005 15:01 PST
Last Modified: 02-12-2007 05:49 PST
======================================================================
Summary: File libpthread/linuxthreads/Makefile.in not found,
causes buildroot to stop compiling
Description:
Hi,
I am trying to use buildroot to create busybox which is linked against
uclibc (rather than libc). Therefore I downloaded the daily snapshot of
buildroot, extracted it and issued the "make" command in order to
configure this thing. However even if I don't change anything in the
standard configation of the software I end up getting these error
messages:
$ make
[ ... ]
cp toolchain/uClibc/uClibc.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/bin/sed -i
-e
's,^CROSS_COMPILER_PREFIX=.*,CROSS_COMPILER_PREFIX="/home/sebastian/test/buildroot/buildroot/build_i686/staging_dir/bin/i686-linux-uclibc-",g'
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/bin/sed -i
-e 's,^.*TARGET_i386.*,TARGET_i386=y,g' \
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/bin/sed -i
-e 's,^TARGET_ARCH.*,TARGET_ARCH=\"i386\",g'
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/bin/sed -i
-e
's,^KERNEL_SOURCE=.*,KERNEL_SOURCE=\"/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/linux\",g'
\
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/bin/sed -i
-e 's,^RUNTIME_PREFIX=.*,RUNTIME_PREFIX=\"/\",g' \
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/bin/sed -i
-e 's,^DEVEL_PREFIX=.*,DEVEL_PREFIX=\"/usr/\",g' \
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/bin/sed -i
-e 's,^SHARED_LIB_LOADER_PREFIX=.*,SHARED_LIB_LOADER_PREFIX=\"/lib\",g' \
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/bin/sed -i
-e 's,^.*UCLIBC_HAS_LFS.*,UCLIBC_HAS_LFS=y,g'
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/bin/sed -i
-e 's,.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=y,g'
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
mkdir -p
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc_dev/usr/include
mkdir -p
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc_dev/usr/lib
mkdir -p
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc_dev/lib
make -C
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc \
PREFIX=/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc_dev/
\
DEVEL_PREFIX=/usr/ \
RUNTIME_PREFIX=/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc_dev/
\
HOSTCC="gcc" \
pregen install_dev;
make[1]:
/home/sebastian/test/buildroot/buildroot/build_i686/staging_dir/bin/i686-linux-uclibc-gcc:
Command not found
make[1]: Entering directory
`/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc'
make[1]:
/home/sebastian/test/buildroot/buildroot/build_i686/staging_dir/bin/i686-linux-uclibc-gcc:
Command not found
make[1]: Entering directory
`/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc'
make[1]: Entering directory
`/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc'
libpthread/Makefile.in:9: libpthread/linuxthreads/Makefile.in: No such
file or directory
make[1]: *** No rule to make target `libpthread/linuxthreads/Makefile.in'.
Stop.
make[1]: Leaving directory
`/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc'
make: ***
[/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.configured]
Error 2
make
cp toolchain/uClibc/uClibc.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/bin/sed -i
-e
's,^CROSS_COMPILER_PREFIX=.*,CROSS_COMPILER_PREFIX="/home/sebastian/test/buildroot/buildroot/build_i686/staging_dir/bin/i686-linux-uclibc-",g'
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/bin/sed -i
-e 's,^.*TARGET_i386.*,TARGET_i386=y,g' \
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/bin/sed -i
-e 's,^TARGET_ARCH.*,TARGET_ARCH=\"i386\",g'
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/bin/sed -i
-e
's,^KERNEL_SOURCE=.*,KERNEL_SOURCE=\"/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/linux\",g'
\
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/bin/sed -i
-e 's,^RUNTIME_PREFIX=.*,RUNTIME_PREFIX=\"/\",g' \
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/bin/sed -i
-e 's,^DEVEL_PREFIX=.*,DEVEL_PREFIX=\"/usr/\",g' \
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/bin/sed -i
-e 's,^SHARED_LIB_LOADER_PREFIX=.*,SHARED_LIB_LOADER_PREFIX=\"/lib\",g' \
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/bin/sed -i
-e 's,^.*UCLIBC_HAS_LFS.*,UCLIBC_HAS_LFS=y,g'
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/bin/sed -i
-e 's,.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=y,g'
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.config
mkdir -p
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc_dev/usr/include
mkdir -p
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc_dev/usr/lib
mkdir -p
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc_dev/lib
make -C
/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc \
PREFIX=/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc_dev/
\
DEVEL_PREFIX=/usr/ \
RUNTIME_PREFIX=/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc_dev/
\
HOSTCC="gcc" \
pregen install_dev;
make[1]:
/home/sebastian/test/buildroot/buildroot/build_i686/staging_dir/bin/i686-linux-uclibc-gcc:
Command not found
make[1]: Entering directory
`/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc'
make[1]:
/home/sebastian/test/buildroot/buildroot/build_i686/staging_dir/bin/i686-linux-uclibc-gcc:
Command not found
make[1]: Entering directory
`/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc'
make[1]: Entering directory
`/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc'
libpthread/Makefile.in:9: libpthread/linuxthreads/Makefile.in: No such
file or directory
make[1]: *** No rule to make target `libpthread/linuxthreads/Makefile.in'.
Stop.
make[1]: Leaving directory
`/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc'
make: ***
[/home/sebastian/test/buildroot/buildroot/toolchain_build_i686/uClibc/.configured]
Error 2
Any ideas what might cause this?
Thanks a lot and bye,
Sebastian
======================================================================
----------------------------------------------------------------------
swolfgarten - 11-20-05 15:02
----------------------------------------------------------------------
Hi,
I should probably add then I am using Gentoo and I unset CC and CXX before
executing "make" etc.
Bye,
Seb
----------------------------------------------------------------------
vapier - 11-20-05 16:00
----------------------------------------------------------------------
changed default config to use linuxthreads.old
Gentoo no longer exports CC/CXX so that doesnt matter
Issue History
Date Modified Username Field Change
======================================================================
11-20-05 15:01 swolfgarten New Issue
11-20-05 15:01 swolfgarten Status new => assigned
11-20-05 15:01 swolfgarten Assigned To => uClibc
11-20-05 15:02 swolfgarten Note Added: 0000683
11-20-05 16:00 vapier Note Added: 0000684
11-20-05 16:00 vapier Status assigned => closed
11-20-05 16:00 vapier Resolution open => fixed
11-20-05 16:00 vapier View Status private => public
02-12-07 05:49 vapier Status closed => assigned
02-12-07 05:49 vapier Assigned To uClibc => buildroot
======================================================================
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-02-12 13:49 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-02-12 13:49 [Buildroot] [buildroot 0000552]: File libpthread/linuxthreads/Makefile.in not found, causes buildroot to stop compiling bugs at busybox.net
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.