From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Patrick Menschel <menschel.p@posteo.de>,
Drew Fustini <drew@beagleboard.org>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>,
linux-can@vger.kernel.org, Josh S <josh@macchina.cc>
Subject: Re: mcp251xfd on RPi 5.4 downstream
Date: Mon, 2 Nov 2020 08:55:30 +0100 [thread overview]
Message-ID: <e94e9104-3765-f85b-e851-fbfb5d76a06f@pengutronix.de> (raw)
In-Reply-To: <e955f39f-2417-4dca-ee3c-70b328c1014d@posteo.de>
[-- Attachment #1.1: Type: text/plain, Size: 941 bytes --]
On 10/31/20 4:14 PM, Patrick Menschel wrote:
[...]
> The waveshare overlay is strange in one point. It uses Pin 26 (instead
> of 18) for Chip selection but that is no chip select pin. This can work
> if the pin is output and luckily pulls the CE line in the right direction.
>
> https://gist.github.com/pdp7/784d0ba8b9648d20ab055747ec945225#file-2xmcp2517fd-overlay-dts-L40
>
> https://pinout.xyz/pinout/pin37_gpio26#
According to the schematics:
https://www.waveshare.com/w/upload/e/e2/2-CH-CAN-FD-HAT-Schematic.pdf
the waveshare uses per default the CS0 and CS1 of SPI0. But you can configure
via JPAD3 it to P25, which is GPIO26.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2020-11-02 7:55 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-22 3:10 mcp251xfd on RPi 5.4 downstream Drew Fustini
2020-10-22 6:00 ` Drew Fustini
2020-10-22 6:33 ` Marc Kleine-Budde
2020-10-22 18:42 ` Drew Fustini
2020-10-25 4:30 ` Drew Fustini
2020-10-25 8:49 ` Oliver Hartkopp
2020-10-25 10:58 ` Marc Kleine-Budde
2020-10-25 17:43 ` Patrick Menschel
2020-10-25 18:14 ` Marc Kleine-Budde
2020-10-25 18:42 ` Patrick Menschel
2020-10-26 1:59 ` Drew Fustini
2020-10-26 2:50 ` Drew Fustini
2020-10-26 5:16 ` Patrick Menschel
2020-10-26 7:45 ` Marc Kleine-Budde
2020-10-26 9:40 ` Marc Kleine-Budde
2020-10-26 16:51 ` Patrick Menschel
2020-10-26 17:00 ` Marc Kleine-Budde
2020-10-27 2:22 ` Drew Fustini
2020-10-27 6:35 ` Drew Fustini
2020-10-27 7:06 ` Marc Kleine-Budde
2020-10-27 18:18 ` Patrick Menschel
2020-10-27 18:22 ` Marc Kleine-Budde
2020-10-28 1:57 ` Drew Fustini
2020-10-28 3:47 ` Drew Fustini
2020-10-28 7:57 ` Marc Kleine-Budde
2020-10-31 12:27 ` Drew Fustini
2020-10-31 15:14 ` Patrick Menschel
2020-10-31 15:35 ` Patrick Menschel
2020-10-31 21:57 ` Drew Fustini
2020-11-01 22:49 ` Drew Fustini
2020-11-02 7:25 ` Marc Kleine-Budde
2020-11-02 8:18 ` Marc Kleine-Budde
[not found] ` <CAPgEAj7LcX3cb+syhtR1i3Uo1XkYYFQ_wDPV8GniaA-YwPk2Hg@mail.gmail.com>
2020-11-02 11:00 ` Marc Kleine-Budde
[not found] ` <CAPgEAj7BTJyiBg4QkKuekYH0zyrA-10dby3Lgb5qj2uiD4ZOYQ@mail.gmail.com>
2020-11-02 14:22 ` mcp251xfd: loopback test on waveshare canfd hat Marc Kleine-Budde
2020-11-02 14:35 ` Drew Fustini
2020-11-02 14:38 ` Marc Kleine-Budde
2020-11-02 17:34 ` mcp251xfd on RPi 5.4 downstream Patrick Menschel
2020-11-02 18:47 ` Patrick Menschel
2020-11-02 18:57 ` Thomas.Kopp
2020-11-02 19:32 ` Patrick Menschel
2020-11-04 18:48 ` Patrick Menschel
2020-11-05 7:15 ` Marc Kleine-Budde
2020-11-05 18:11 ` Patrick Menschel
2020-11-06 9:00 ` Marc Kleine-Budde
2020-11-06 11:31 ` Patrick Menschel
2020-11-06 11:36 ` Marc Kleine-Budde
2020-11-06 11:46 ` Patrick Menschel
2020-11-05 8:08 ` Marc Kleine-Budde
2020-11-05 8:07 ` Marc Kleine-Budde
2020-11-02 7:55 ` Marc Kleine-Budde [this message]
2020-11-02 7:26 ` Marc Kleine-Budde
2020-10-26 7:43 ` Marc Kleine-Budde
2020-11-20 12:32 ` Marc Kleine-Budde
[not found] ` <CAEf4M_B68X2T0rkaq0tqahBFPc+Gbvac7-+G0j5jd-g4j+j01g@mail.gmail.com>
2020-11-20 13:16 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e94e9104-3765-f85b-e851-fbfb5d76a06f@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=drew@beagleboard.org \
--cc=josh@macchina.cc \
--cc=linux-can@vger.kernel.org \
--cc=menschel.p@posteo.de \
--cc=socketcan@hartkopp.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.