[PATCH] cmake: determine list of extra built-ins dynamically

[PATCH] cmake: determine list of extra built-ins dynamically

[Johannes Schindelin via GitGitGadget]

From: Johannes Schindelin <johannes.schindelin@gmx.de>

In 0a21d0e08902 (Makefile: mark git-maintenance as a builtin,
2020-12-01), we marked git-maintenance as a builtin in the Makefile, but
forgot to do the same in `CMakeLists.txt`.

Rather than always play catch-up and adjust `git_builtin_extra`
manually, use the `BUILT_INS` definitions in the Makefile as
authoritative source and generate `git_builtin_extra` dynamically.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
---
    ci: fix the vs-build job after adding git maintenance
    
    Together with https://github.com/gitgitgadget/git/pull/805, this should
    fix the vs-build job in the CI build of seen.

Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-807%2Fdscho%2Fcmake-and-extra-builtins-v1
Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-807/dscho/cmake-and-extra-builtins-v1
Pull-Request: https://github.com/gitgitgadget/git/pull/807

 contrib/buildsystems/CMakeLists.txt | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/contrib/buildsystems/CMakeLists.txt b/contrib/buildsystems/CMakeLists.txt
index df539a44fa..c151dd7257 100644
--- a/contrib/buildsystems/CMakeLists.txt
+++ b/contrib/buildsystems/CMakeLists.txt
@@ -114,6 +114,16 @@ macro(parse_makefile_for_scripts list_var regex lang)
 	endif()
 endmacro()
 
+macro(parse_makefile_for_executables list_var regex)
+	file(STRINGS ${CMAKE_SOURCE_DIR}/Makefile ${list_var} REGEX "^${regex} \\+= git-(.*)")
+	string(REPLACE "${regex} +=" "" ${list_var} ${${list_var}})
+	string(STRIP ${${list_var}} ${list_var}) #remove trailing/leading whitespaces
+	string(REPLACE "git-" "" ${list_var} ${${list_var}}) #strip `git-` prefix
+	string(REPLACE "\$X" ";" ${list_var} ${${list_var}}) #strip $X, ; is for converting the string into a list
+	list(TRANSFORM ${list_var} STRIP) #remove trailing/leading whitespaces for each element in list
+	list(REMOVE_ITEM ${list_var} "") #remove empty list elements
+endmacro()
+
 include(CheckTypeSize)
 include(CheckCSourceRuns)
 include(CheckCSourceCompiles)
@@ -673,10 +683,7 @@ if(CURL_FOUND)
 	endif()
 endif()
 
-set(git_builtin_extra
-	cherry cherry-pick format-patch fsck-objects
-	init merge-subtree restore show
-	stage status switch whatchanged)
+parse_makefile_for_executables(git_builtin_extra "BUILT_INS")
 
 #Creating hardlinks
 foreach(s ${git_SOURCES} ${git_builtin_extra})

base-commit: 898f80736c75878acc02dc55672317fcc0e0a5a6
-- 
gitgitgadget

Re: [PATCH] cmake: determine list of extra built-ins dynamically

[Junio C Hamano]

"Johannes Schindelin via GitGitGadget" <gitgitgadget@gmail.com>
writes:

> From: Johannes Schindelin <johannes.schindelin@gmx.de>
>
> In 0a21d0e08902 (Makefile: mark git-maintenance as a builtin,
> 2020-12-01), we marked git-maintenance as a builtin in the Makefile, but
> forgot to do the same in `CMakeLists.txt`.
>
> Rather than always play catch-up and adjust `git_builtin_extra`
> manually, use the `BUILT_INS` definitions in the Makefile as
> authoritative source and generate `git_builtin_extra` dynamically.
>
> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
> ---
>     ci: fix the vs-build job after adding git maintenance
>     
>     Together with https://github.com/gitgitgadget/git/pull/805, this should
>     fix the vs-build job in the CI build of seen.

I suspect that the breakage 805 addresses affects even 'master'; is
the breakage this patch fixes limited to 'seen', or affect everybody?

> Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-807%2Fdscho%2Fcmake-and-extra-builtins-v1
> Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-807/dscho/cmake-and-extra-builtins-v1
> Pull-Request: https://github.com/gitgitgadget/git/pull/807
>
>  contrib/buildsystems/CMakeLists.txt | 15 +++++++++++----
>  1 file changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/contrib/buildsystems/CMakeLists.txt b/contrib/buildsystems/CMakeLists.txt
> index df539a44fa..c151dd7257 100644
> --- a/contrib/buildsystems/CMakeLists.txt
> +++ b/contrib/buildsystems/CMakeLists.txt
> @@ -114,6 +114,16 @@ macro(parse_makefile_for_scripts list_var regex lang)
>  	endif()
>  endmacro()
>  
> +macro(parse_makefile_for_executables list_var regex)
> +	file(STRINGS ${CMAKE_SOURCE_DIR}/Makefile ${list_var} REGEX "^${regex} \\+= git-(.*)")
> +	string(REPLACE "${regex} +=" "" ${list_var} ${${list_var}})
> +	string(STRIP ${${list_var}} ${list_var}) #remove trailing/leading whitespaces
> +	string(REPLACE "git-" "" ${list_var} ${${list_var}}) #strip `git-` prefix
> +	string(REPLACE "\$X" ";" ${list_var} ${${list_var}}) #strip $X, ; is for converting the string into a list
> +	list(TRANSFORM ${list_var} STRIP) #remove trailing/leading whitespaces for each element in list
> +	list(REMOVE_ITEM ${list_var} "") #remove empty list elements
> +endmacro()
> +
>  include(CheckTypeSize)
>  include(CheckCSourceRuns)
>  include(CheckCSourceCompiles)
> @@ -673,10 +683,7 @@ if(CURL_FOUND)
>  	endif()
>  endif()
>  
> -set(git_builtin_extra
> -	cherry cherry-pick format-patch fsck-objects
> -	init merge-subtree restore show
> -	stage status switch whatchanged)
> +parse_makefile_for_executables(git_builtin_extra "BUILT_INS")
>  
>  #Creating hardlinks
>  foreach(s ${git_SOURCES} ${git_builtin_extra})
>
> base-commit: 898f80736c75878acc02dc55672317fcc0e0a5a6

Re: [PATCH] cmake: determine list of extra built-ins dynamically

[Johannes Schindelin]

Hi Junio,

On Fri, 4 Dec 2020, Junio C Hamano wrote:

> "Johannes Schindelin via GitGitGadget" <gitgitgadget@gmail.com>
> writes:
>
> > From: Johannes Schindelin <johannes.schindelin@gmx.de>
> >
> > In 0a21d0e08902 (Makefile: mark git-maintenance as a builtin,
> > 2020-12-01), we marked git-maintenance as a builtin in the Makefile, but
> > forgot to do the same in `CMakeLists.txt`.
> >
> > Rather than always play catch-up and adjust `git_builtin_extra`
> > manually, use the `BUILT_INS` definitions in the Makefile as
> > authoritative source and generate `git_builtin_extra` dynamically.
> >
> > Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
> > ---
> >     ci: fix the vs-build job after adding git maintenance
> >
> >     Together with https://github.com/gitgitgadget/git/pull/805, this should
> >     fix the vs-build job in the CI build of seen.
>
> I suspect that the breakage 805 addresses affects even 'master'; is
> the breakage this patch fixes limited to 'seen', or affect everybody?

I haven't checked `master` yet, but `next` definitely was affected. I
_think_ the problem was introduced when Peff's patch added the
`git-maintenance` tool to the `BUILT_INS` list in the `Makefile` (and
hence we try to `tar` it up with all the other build artifacts in the
`vs-build` job) but wasn't added to `CMakeLists.txt` (and therefore
`vs-build` would not generate that hard-link).

Ciao,
Dscho

>
> > Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-807%2Fdscho%2Fcmake-and-extra-builtins-v1
> > Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-807/dscho/cmake-and-extra-builtins-v1
> > Pull-Request: https://github.com/gitgitgadget/git/pull/807
> >
> >  contrib/buildsystems/CMakeLists.txt | 15 +++++++++++----
> >  1 file changed, 11 insertions(+), 4 deletions(-)
> >
> > diff --git a/contrib/buildsystems/CMakeLists.txt b/contrib/buildsystems/CMakeLists.txt
> > index df539a44fa..c151dd7257 100644
> > --- a/contrib/buildsystems/CMakeLists.txt
> > +++ b/contrib/buildsystems/CMakeLists.txt
> > @@ -114,6 +114,16 @@ macro(parse_makefile_for_scripts list_var regex lang)
> >  	endif()
> >  endmacro()
> >
> > +macro(parse_makefile_for_executables list_var regex)
> > +	file(STRINGS ${CMAKE_SOURCE_DIR}/Makefile ${list_var} REGEX "^${regex} \\+= git-(.*)")
> > +	string(REPLACE "${regex} +=" "" ${list_var} ${${list_var}})
> > +	string(STRIP ${${list_var}} ${list_var}) #remove trailing/leading whitespaces
> > +	string(REPLACE "git-" "" ${list_var} ${${list_var}}) #strip `git-` prefix
> > +	string(REPLACE "\$X" ";" ${list_var} ${${list_var}}) #strip $X, ; is for converting the string into a list
> > +	list(TRANSFORM ${list_var} STRIP) #remove trailing/leading whitespaces for each element in list
> > +	list(REMOVE_ITEM ${list_var} "") #remove empty list elements
> > +endmacro()
> > +
> >  include(CheckTypeSize)
> >  include(CheckCSourceRuns)
> >  include(CheckCSourceCompiles)
> > @@ -673,10 +683,7 @@ if(CURL_FOUND)
> >  	endif()
> >  endif()
> >
> > -set(git_builtin_extra
> > -	cherry cherry-pick format-patch fsck-objects
> > -	init merge-subtree restore show
> > -	stage status switch whatchanged)
> > +parse_makefile_for_executables(git_builtin_extra "BUILT_INS")
> >
> >  #Creating hardlinks
> >  foreach(s ${git_SOURCES} ${git_builtin_extra})
> >
> > base-commit: 898f80736c75878acc02dc55672317fcc0e0a5a6
>

Re: [PATCH] cmake: determine list of extra built-ins dynamically

[Jeff King]

On Fri, Dec 04, 2020 at 07:33:56PM +0000, Johannes Schindelin via GitGitGadget wrote:

> In 0a21d0e08902 (Makefile: mark git-maintenance as a builtin,
> 2020-12-01), we marked git-maintenance as a builtin in the Makefile, but
> forgot to do the same in `CMakeLists.txt`.

Oof, right.

> Rather than always play catch-up and adjust `git_builtin_extra`
> manually, use the `BUILT_INS` definitions in the Makefile as
> authoritative source and generate `git_builtin_extra` dynamically.

Yay. This is exactly how I'd hoped things would work or the cmake file
in general. I don't mind following micro-formats within our Makefile to
keep things easier for the cmake parsing side.

>  contrib/buildsystems/CMakeLists.txt | 15 +++++++++++----
>  1 file changed, 11 insertions(+), 4 deletions(-)

The implementation looks plausibly correct to me (bearing in mind that
I've never written cmake).

-Peff

Re: [PATCH] cmake: determine list of extra built-ins dynamically

[Johannes Schindelin]

Hi Peff,

On Fri, 4 Dec 2020, Jeff King wrote:

> On Fri, Dec 04, 2020 at 07:33:56PM +0000, Johannes Schindelin via GitGitGadget wrote:
>
> > Rather than always play catch-up and adjust `git_builtin_extra`
> > manually, use the `BUILT_INS` definitions in the Makefile as
> > authoritative source and generate `git_builtin_extra` dynamically.
>
> Yay. This is exactly how I'd hoped things would work or the cmake file
> in general. I don't mind following micro-formats within our Makefile to
> keep things easier for the cmake parsing side.

Me, too. I am somewhat embarrassed that I missed the `git_builtin_extra`
list in my review of the CMake patch series...

> >  contrib/buildsystems/CMakeLists.txt | 15 +++++++++++----
> >  1 file changed, 11 insertions(+), 4 deletions(-)
>
> The implementation looks plausibly correct to me (bearing in mind that
> I've never written cmake).

It is a close copy of the two macros we already use to parse the
`Makefile` for lists of `.o` files and for scripts.

Together with the fact that this patch fixes the CI build of Git for
Windows' `shears/seen` branch (which is a continuously-rebased version of
Git for Windows' `main` branch onto `seen`, plus fixups), I am fairly
confident that it is correct.

Ciao,
Dscho