* spca561 webcam support, broken since v4.18
@ 2018-11-09 22:13 softwarebugs
0 siblings, 0 replies; 3+ messages in thread
From: softwarebugs @ 2018-11-09 22:13 UTC (permalink / raw)
To: linux-media
v4.17.19 is the last version it works with. Since v4.18 I cannot use it.
from the lsusb output:
ID 04fc:0561 Sunplus Technology Co., Ltd Flexcam 100
from the dmesg output:
After a restart, after I click to make it start capturing (the bandwidth
message appears only when the first capturing is started):
spca561 : alt 7 - bandwidth not wide enough, trying again
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
After clicking to make it stop capturing:
spca561 : urb status: -2
gspca_main: usb_submit_urb() ret -1
spca561 : urb status: -2
gspca_main: usb_submit_urb() ret -1
spca561 : urb status: -2
gspca_main: usb_submit_urb() ret -1
^ permalink raw reply [flat|nested] 3+ messages in thread
* spca561 webcam support, broken since v4.18
@ 2018-11-09 22:34 softwarebugs
0 siblings, 0 replies; 3+ messages in thread
From: softwarebugs @ 2018-11-09 22:34 UTC (permalink / raw)
To: linux-media
v4.17.19 is the last version it works with. Since v4.18 I cannot use it.
from the lsusb output:
ID 04fc:0561 Sunplus Technology Co., Ltd Flexcam 100
from the dmesg output:
After a restart, after I click to make it start capturing (the bandwidth
message appears only when the first capturing is started):
spca561 : alt 7 - bandwidth not wide enough, trying again
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
After clicking to make it stop capturing:
spca561 : urb status: -2
gspca_main: usb_submit_urb() ret -1
spca561 : urb status: -2
gspca_main: usb_submit_urb() ret -1
spca561 : urb status: -2
gspca_main: usb_submit_urb() ret -1
^ permalink raw reply [flat|nested] 3+ messages in thread
* spca561 webcam support, broken since v4.18
@ 2018-11-09 22:24 softwarebugs
0 siblings, 0 replies; 3+ messages in thread
From: softwarebugs @ 2018-11-09 22:24 UTC (permalink / raw)
To: linux-media
v4.17.19 is the last version it works with. Since v4.18 I cannot use it.
from the lsusb output:
ID 04fc:0561 Sunplus Technology Co., Ltd Flexcam 100
from the dmesg output:
After a restart, after I click to make it start capturing (the bandwidth
message appears only when the first capturing is started):
spca561 : alt 7 - bandwidth not wide enough, trying again
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
spca561 : frame overflow 19793 > 19200
After clicking to make it stop capturing:
spca561 : urb status: -2
gspca_main: usb_submit_urb() ret -1
spca561 : urb status: -2
gspca_main: usb_submit_urb() ret -1
spca561 : urb status: -2
gspca_main: usb_submit_urb() ret -1
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-11-10 8:17 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-09 22:13 spca561 webcam support, broken since v4.18 softwarebugs
2018-11-09 22:24 softwarebugs
2018-11-09 22:34 softwarebugs
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.