* [PATCH 1/1] dmaengine: fsl-edma: merge mcf-edma into fsl-edma driver
@ 2024-05-09 19:35 Frank Li
2024-05-13 18:12 ` Geert Uytterhoeven
0 siblings, 1 reply; 5+ messages in thread
From: Frank Li @ 2024-05-09 19:35 UTC (permalink / raw)
To: Vinod Koul, open list:DMA GENERIC OFFLOAD ENGINE SUBSYSTEM,
open list, open list:FREESCALE eDMA DRIVER
MCF eDMA are almost the same as FSL eDMA driver. Previously link to two
kernel modules, fsl-edma.ko and mcf-edma.ko. These are not problem because
mcf-edma is for m68k ARCH and FSL eDMA is for arm/arm64 ARCH. But often
build both at PPC ARCH. It also makes sense to build two drivers at the
same time. It causes many build warning because share a fsl-edma-common.o.
such as:
powerpc64le-linux-ld: warning: orphan section `.stubs' from `drivers/dma/fsl-edma-common.o' being placed in section `.stubs'
powerpc64le-linux-ld: warning: orphan section `.stubs' from `drivers/dma/fsl-edma-trace.o' being placed in section `.stubs'
Merge mcf-edma into fsl-edma driver. So use one driver (fsl-edma.ko) for
MCF and FSL eDMA.
mcf-edma.ko should be replaced by fsl-edma.ko in modules, minimizing user
space impact because MCF eDMA remains confined to legacy ColdFire mcf5441x
production and mcf5441x has been in production for at least a decade and
NXP has long ceased ColdFire development.
Update Kconfig to make MCF_EDMA as feature of FSL_EDMA and change Makefile
to link mcl-edma-main.o to fsl-edma.o.
Create a common module init/exit functions, which call original's
fsl-edma-init[exit]() and mcf-edma-init[exit]().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405082029.Es9umH7n-lkp@intel.com/
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/dma/Kconfig | 8 ++++----
drivers/dma/Makefile | 5 ++---
drivers/dma/fsl-edma-common.c | 28 ++++++++++++++++++++++++++++
drivers/dma/fsl-edma-common.h | 5 +++++
drivers/dma/fsl-edma-main.c | 6 ++----
drivers/dma/mcf-edma-main.c | 6 ++----
6 files changed, 43 insertions(+), 15 deletions(-)
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 002a5ec806207..45110520f6e68 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -393,14 +393,14 @@ config LS2X_APB_DMA
It does not support memory to memory data transfer.
config MCF_EDMA
- tristate "Freescale eDMA engine support, ColdFire mcf5441x SoCs"
+ bool "Freescale eDMA engine support, ColdFire mcf5441x SoCs"
depends on M5441x || COMPILE_TEST
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
- Support the Freescale ColdFire eDMA engine, 64-channel
- implementation that performs complex data transfers with
- minimal intervention from a host processor.
+ Support the Freescale ColdFire eDMA engine in FSL_EDMA driver,
+ 64-channel implementation that performs complex data transfers
+ with minimal intervention from a host processor.
This module can be found on Freescale ColdFire mcf5441x SoCs.
config MILBEAUT_HDMAC
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 802ca916f05f5..0000922c7cbfe 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -33,11 +33,10 @@ obj-$(CONFIG_DW_EDMA) += dw-edma/
obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
fsl-edma-trace-$(CONFIG_TRACING) := fsl-edma-trace.o
CFLAGS_fsl-edma-trace.o := -I$(src)
+mcf-edma-main-$(CONFIG_MCF_EDMA) := mcf-edma-main.o
obj-$(CONFIG_FSL_DMA) += fsldma.o
-fsl-edma-objs := fsl-edma-main.o fsl-edma-common.o ${fsl-edma-trace-y}
+fsl-edma-objs := fsl-edma-main.o fsl-edma-common.o ${fsl-edma-trace-y} ${mcf-edma-main-y}
obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
-mcf-edma-objs := mcf-edma-main.o fsl-edma-common.o ${fsl-edma-trace-y}
-obj-$(CONFIG_MCF_EDMA) += mcf-edma.o
obj-$(CONFIG_FSL_QDMA) += fsl-qdma.o
obj-$(CONFIG_FSL_RAID) += fsl_raid.o
obj-$(CONFIG_HISI_DMA) += hisi_dma.o
diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
index 3af4307873157..ac04a2ce4fa1f 100644
--- a/drivers/dma/fsl-edma-common.c
+++ b/drivers/dma/fsl-edma-common.c
@@ -888,4 +888,32 @@ void fsl_edma_setup_regs(struct fsl_edma_engine *edma)
}
}
+static int __init fsl_edma_common_init(void)
+{
+ int ret;
+
+ ret = fsl_edma_init();
+ if (ret)
+ return ret;
+
+#ifdef CONFIG_MCF_EDMA
+ ret = mcf_edma_init();
+ if (ret)
+ return ret;
+#endif
+ return 0;
+}
+
+subsys_initcall(fsl_edma_common_init);
+
+static void __exit fsl_edma_common_exit(void)
+{
+ fsl_edma_exit();
+
+#ifdef CONFIG_MCF_EDMA
+ mcf_edma_exit();
+#endif
+}
+module_exit(fsl_edma_common_exit);
+
MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h
index ac66222c16040..dfbdcc922ceea 100644
--- a/drivers/dma/fsl-edma-common.h
+++ b/drivers/dma/fsl-edma-common.h
@@ -488,4 +488,9 @@ void fsl_edma_free_chan_resources(struct dma_chan *chan);
void fsl_edma_cleanup_vchan(struct dma_device *dmadev);
void fsl_edma_setup_regs(struct fsl_edma_engine *edma);
+int __init fsl_edma_init(void);
+void __exit fsl_edma_exit(void);
+int __init mcf_edma_init(void);
+void __exit mcf_edma_exit(void);
+
#endif /* _FSL_EDMA_COMMON_H_ */
diff --git a/drivers/dma/fsl-edma-main.c b/drivers/dma/fsl-edma-main.c
index 391e4f13dfeb0..a1c3c4ed869c5 100644
--- a/drivers/dma/fsl-edma-main.c
+++ b/drivers/dma/fsl-edma-main.c
@@ -724,17 +724,15 @@ static struct platform_driver fsl_edma_driver = {
.remove_new = fsl_edma_remove,
};
-static int __init fsl_edma_init(void)
+int __init fsl_edma_init(void)
{
return platform_driver_register(&fsl_edma_driver);
}
-subsys_initcall(fsl_edma_init);
-static void __exit fsl_edma_exit(void)
+void __exit fsl_edma_exit(void)
{
platform_driver_unregister(&fsl_edma_driver);
}
-module_exit(fsl_edma_exit);
MODULE_ALIAS("platform:fsl-edma");
MODULE_DESCRIPTION("Freescale eDMA engine driver");
diff --git a/drivers/dma/mcf-edma-main.c b/drivers/dma/mcf-edma-main.c
index 78c606f6d0026..d97991a1e9518 100644
--- a/drivers/dma/mcf-edma-main.c
+++ b/drivers/dma/mcf-edma-main.c
@@ -284,17 +284,15 @@ bool mcf_edma_filter_fn(struct dma_chan *chan, void *param)
}
EXPORT_SYMBOL(mcf_edma_filter_fn);
-static int __init mcf_edma_init(void)
+int __init mcf_edma_init(void)
{
return platform_driver_register(&mcf_edma_driver);
}
-subsys_initcall(mcf_edma_init);
-static void __exit mcf_edma_exit(void)
+void __exit mcf_edma_exit(void)
{
platform_driver_unregister(&mcf_edma_driver);
}
-module_exit(mcf_edma_exit);
MODULE_ALIAS("platform:mcf-edma");
MODULE_DESCRIPTION("Freescale eDMA engine driver, ColdFire family");
--
2.34.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 1/1] dmaengine: fsl-edma: merge mcf-edma into fsl-edma driver
2024-05-09 19:35 [PATCH 1/1] dmaengine: fsl-edma: merge mcf-edma into fsl-edma driver Frank Li
@ 2024-05-13 18:12 ` Geert Uytterhoeven
2024-05-14 7:57 ` Angelo Dureghello
0 siblings, 1 reply; 5+ messages in thread
From: Geert Uytterhoeven @ 2024-05-13 18:12 UTC (permalink / raw)
To: Frank Li
Cc: Vinod Koul, open list:DMA GENERIC OFFLOAD ENGINE SUBSYSTEM,
open list, open list:FREESCALE eDMA DRIVER, Greg Ungerer,
Angelo Dureghello, linux-m68k
CC coldfire
On Thu, May 9, 2024 at 9:35 PM Frank Li <Frank.Li@nxp.com> wrote:
> MCF eDMA are almost the same as FSL eDMA driver. Previously link to two
> kernel modules, fsl-edma.ko and mcf-edma.ko. These are not problem because
> mcf-edma is for m68k ARCH and FSL eDMA is for arm/arm64 ARCH. But often
> build both at PPC ARCH. It also makes sense to build two drivers at the
> same time. It causes many build warning because share a fsl-edma-common.o.
> such as:
>
> powerpc64le-linux-ld: warning: orphan section `.stubs' from `drivers/dma/fsl-edma-common.o' being placed in section `.stubs'
> powerpc64le-linux-ld: warning: orphan section `.stubs' from `drivers/dma/fsl-edma-trace.o' being placed in section `.stubs'
>
> Merge mcf-edma into fsl-edma driver. So use one driver (fsl-edma.ko) for
> MCF and FSL eDMA.
>
> mcf-edma.ko should be replaced by fsl-edma.ko in modules, minimizing user
> space impact because MCF eDMA remains confined to legacy ColdFire mcf5441x
> production and mcf5441x has been in production for at least a decade and
> NXP has long ceased ColdFire development.
>
> Update Kconfig to make MCF_EDMA as feature of FSL_EDMA and change Makefile
> to link mcl-edma-main.o to fsl-edma.o.
>
> Create a common module init/exit functions, which call original's
> fsl-edma-init[exit]() and mcf-edma-init[exit]().
>
> Reported-by: kernel test robot <lkp@intel.com>
> Closes: https://lore.kernel.org/oe-kbuild-all/202405082029.Es9umH7n-lkp@intel.com/
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> drivers/dma/Kconfig | 8 ++++----
> drivers/dma/Makefile | 5 ++---
> drivers/dma/fsl-edma-common.c | 28 ++++++++++++++++++++++++++++
> drivers/dma/fsl-edma-common.h | 5 +++++
> drivers/dma/fsl-edma-main.c | 6 ++----
> drivers/dma/mcf-edma-main.c | 6 ++----
> 6 files changed, 43 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
> index 002a5ec806207..45110520f6e68 100644
> --- a/drivers/dma/Kconfig
> +++ b/drivers/dma/Kconfig
> @@ -393,14 +393,14 @@ config LS2X_APB_DMA
> It does not support memory to memory data transfer.
>
> config MCF_EDMA
> - tristate "Freescale eDMA engine support, ColdFire mcf5441x SoCs"
> + bool "Freescale eDMA engine support, ColdFire mcf5441x SoCs"
> depends on M5441x || COMPILE_TEST
> select DMA_ENGINE
> select DMA_VIRTUAL_CHANNELS
> help
> - Support the Freescale ColdFire eDMA engine, 64-channel
> - implementation that performs complex data transfers with
> - minimal intervention from a host processor.
> + Support the Freescale ColdFire eDMA engine in FSL_EDMA driver,
> + 64-channel implementation that performs complex data transfers
> + with minimal intervention from a host processor.
> This module can be found on Freescale ColdFire mcf5441x SoCs.
>
> config MILBEAUT_HDMAC
> diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
> index 802ca916f05f5..0000922c7cbfe 100644
> --- a/drivers/dma/Makefile
> +++ b/drivers/dma/Makefile
> @@ -33,11 +33,10 @@ obj-$(CONFIG_DW_EDMA) += dw-edma/
> obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
> fsl-edma-trace-$(CONFIG_TRACING) := fsl-edma-trace.o
> CFLAGS_fsl-edma-trace.o := -I$(src)
> +mcf-edma-main-$(CONFIG_MCF_EDMA) := mcf-edma-main.o
> obj-$(CONFIG_FSL_DMA) += fsldma.o
> -fsl-edma-objs := fsl-edma-main.o fsl-edma-common.o ${fsl-edma-trace-y}
> +fsl-edma-objs := fsl-edma-main.o fsl-edma-common.o ${fsl-edma-trace-y} ${mcf-edma-main-y}
> obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
> -mcf-edma-objs := mcf-edma-main.o fsl-edma-common.o ${fsl-edma-trace-y}
> -obj-$(CONFIG_MCF_EDMA) += mcf-edma.o
> obj-$(CONFIG_FSL_QDMA) += fsl-qdma.o
> obj-$(CONFIG_FSL_RAID) += fsl_raid.o
> obj-$(CONFIG_HISI_DMA) += hisi_dma.o
> diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
> index 3af4307873157..ac04a2ce4fa1f 100644
> --- a/drivers/dma/fsl-edma-common.c
> +++ b/drivers/dma/fsl-edma-common.c
> @@ -888,4 +888,32 @@ void fsl_edma_setup_regs(struct fsl_edma_engine *edma)
> }
> }
>
> +static int __init fsl_edma_common_init(void)
> +{
> + int ret;
> +
> + ret = fsl_edma_init();
> + if (ret)
> + return ret;
> +
> +#ifdef CONFIG_MCF_EDMA
> + ret = mcf_edma_init();
> + if (ret)
> + return ret;
> +#endif
> + return 0;
> +}
> +
> +subsys_initcall(fsl_edma_common_init);
> +
> +static void __exit fsl_edma_common_exit(void)
> +{
> + fsl_edma_exit();
> +
> +#ifdef CONFIG_MCF_EDMA
> + mcf_edma_exit();
> +#endif
> +}
> +module_exit(fsl_edma_common_exit);
> +
> MODULE_LICENSE("GPL v2");
> diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h
> index ac66222c16040..dfbdcc922ceea 100644
> --- a/drivers/dma/fsl-edma-common.h
> +++ b/drivers/dma/fsl-edma-common.h
> @@ -488,4 +488,9 @@ void fsl_edma_free_chan_resources(struct dma_chan *chan);
> void fsl_edma_cleanup_vchan(struct dma_device *dmadev);
> void fsl_edma_setup_regs(struct fsl_edma_engine *edma);
>
> +int __init fsl_edma_init(void);
> +void __exit fsl_edma_exit(void);
> +int __init mcf_edma_init(void);
> +void __exit mcf_edma_exit(void);
> +
> #endif /* _FSL_EDMA_COMMON_H_ */
> diff --git a/drivers/dma/fsl-edma-main.c b/drivers/dma/fsl-edma-main.c
> index 391e4f13dfeb0..a1c3c4ed869c5 100644
> --- a/drivers/dma/fsl-edma-main.c
> +++ b/drivers/dma/fsl-edma-main.c
> @@ -724,17 +724,15 @@ static struct platform_driver fsl_edma_driver = {
> .remove_new = fsl_edma_remove,
> };
>
> -static int __init fsl_edma_init(void)
> +int __init fsl_edma_init(void)
> {
> return platform_driver_register(&fsl_edma_driver);
> }
> -subsys_initcall(fsl_edma_init);
>
> -static void __exit fsl_edma_exit(void)
> +void __exit fsl_edma_exit(void)
> {
> platform_driver_unregister(&fsl_edma_driver);
> }
> -module_exit(fsl_edma_exit);
>
> MODULE_ALIAS("platform:fsl-edma");
> MODULE_DESCRIPTION("Freescale eDMA engine driver");
> diff --git a/drivers/dma/mcf-edma-main.c b/drivers/dma/mcf-edma-main.c
> index 78c606f6d0026..d97991a1e9518 100644
> --- a/drivers/dma/mcf-edma-main.c
> +++ b/drivers/dma/mcf-edma-main.c
> @@ -284,17 +284,15 @@ bool mcf_edma_filter_fn(struct dma_chan *chan, void *param)
> }
> EXPORT_SYMBOL(mcf_edma_filter_fn);
>
> -static int __init mcf_edma_init(void)
> +int __init mcf_edma_init(void)
> {
> return platform_driver_register(&mcf_edma_driver);
> }
> -subsys_initcall(mcf_edma_init);
>
> -static void __exit mcf_edma_exit(void)
> +void __exit mcf_edma_exit(void)
> {
> platform_driver_unregister(&mcf_edma_driver);
> }
> -module_exit(mcf_edma_exit);
>
> MODULE_ALIAS("platform:mcf-edma");
> MODULE_DESCRIPTION("Freescale eDMA engine driver, ColdFire family");
> --
> 2.34.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/1] dmaengine: fsl-edma: merge mcf-edma into fsl-edma driver
2024-05-13 18:12 ` Geert Uytterhoeven
@ 2024-05-14 7:57 ` Angelo Dureghello
2024-05-14 16:16 ` Frank Li
0 siblings, 1 reply; 5+ messages in thread
From: Angelo Dureghello @ 2024-05-14 7:57 UTC (permalink / raw)
To: Geert Uytterhoeven, Frank Li
Cc: Vinod Koul, open list:DMA GENERIC OFFLOAD ENGINE SUBSYSTEM,
open list, open list:FREESCALE eDMA DRIVER, Greg Ungerer,
linux-m68k
Hi,
On 13/05/24 8:12 PM, Geert Uytterhoeven wrote:
> CC coldfire
>
> On Thu, May 9, 2024 at 9:35 PM Frank Li <Frank.Li@nxp.com> wrote:
>> MCF eDMA are almost the same as FSL eDMA driver. Previously link to two
>> kernel modules, fsl-edma.ko and mcf-edma.ko. These are not problem because
>> mcf-edma is for m68k ARCH and FSL eDMA is for arm/arm64 ARCH. But often
>> build both at PPC ARCH. It also makes sense to build two drivers at the
>> same time. It causes many build warning because share a fsl-edma-common.o.
>> such as:
>>
>> powerpc64le-linux-ld: warning: orphan section `.stubs' from `drivers/dma/fsl-edma-common.o' being placed in section `.stubs'
>> powerpc64le-linux-ld: warning: orphan section `.stubs' from `drivers/dma/fsl-edma-trace.o' being placed in section `.stubs'
>>
>> Merge mcf-edma into fsl-edma driver. So use one driver (fsl-edma.ko) for
>> MCF and FSL eDMA.
>>
>> mcf-edma.ko should be replaced by fsl-edma.ko in modules, minimizing user
>> space impact because MCF eDMA remains confined to legacy ColdFire mcf5441x
>> production and mcf5441x has been in production for at least a decade and
>> NXP has long ceased ColdFire development.
when i developed mcf-edma, i tried to modify fsl-edma first. Modules are
similar but there are various edma IP versions, and i remember minimal
differences in the CF version too, some register bits and, of course,
endianness.
If a merge is possible, welcome, i have here mcf5441x, can give a try to
this patch as soon as i can.
>> Update Kconfig to make MCF_EDMA as feature of FSL_EDMA and change Makefile
>> to link mcl-edma-main.o to fsl-edma.o.
>>
>> Create a common module init/exit functions, which call original's
>> fsl-edma-init[exit]() and mcf-edma-init[exit]().
>>
>> Reported-by: kernel test robot <lkp@intel.com>
>> Closes: https://lore.kernel.org/oe-kbuild-all/202405082029.Es9umH7n-lkp@intel.com/
>> Signed-off-by: Frank Li <Frank.Li@nxp.com>
>> ---
>> drivers/dma/Kconfig | 8 ++++----
>> drivers/dma/Makefile | 5 ++---
>> drivers/dma/fsl-edma-common.c | 28 ++++++++++++++++++++++++++++
>> drivers/dma/fsl-edma-common.h | 5 +++++
>> drivers/dma/fsl-edma-main.c | 6 ++----
>> drivers/dma/mcf-edma-main.c | 6 ++----
>> 6 files changed, 43 insertions(+), 15 deletions(-)
>>
>> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
>> index 002a5ec806207..45110520f6e68 100644
>> --- a/drivers/dma/Kconfig
>> +++ b/drivers/dma/Kconfig
>> @@ -393,14 +393,14 @@ config LS2X_APB_DMA
>> It does not support memory to memory data transfer.
>>
>> config MCF_EDMA
>> - tristate "Freescale eDMA engine support, ColdFire mcf5441x SoCs"
>> + bool "Freescale eDMA engine support, ColdFire mcf5441x SoCs"
>> depends on M5441x || COMPILE_TEST
>> select DMA_ENGINE
>> select DMA_VIRTUAL_CHANNELS
>> help
>> - Support the Freescale ColdFire eDMA engine, 64-channel
>> - implementation that performs complex data transfers with
>> - minimal intervention from a host processor.
>> + Support the Freescale ColdFire eDMA engine in FSL_EDMA driver,
>> + 64-channel implementation that performs complex data transfers
>> + with minimal intervention from a host processor.
>> This module can be found on Freescale ColdFire mcf5441x SoCs.
>>
>> config MILBEAUT_HDMAC
>> diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
>> index 802ca916f05f5..0000922c7cbfe 100644
>> --- a/drivers/dma/Makefile
>> +++ b/drivers/dma/Makefile
>> @@ -33,11 +33,10 @@ obj-$(CONFIG_DW_EDMA) += dw-edma/
>> obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
>> fsl-edma-trace-$(CONFIG_TRACING) := fsl-edma-trace.o
>> CFLAGS_fsl-edma-trace.o := -I$(src)
>> +mcf-edma-main-$(CONFIG_MCF_EDMA) := mcf-edma-main.o
>> obj-$(CONFIG_FSL_DMA) += fsldma.o
>> -fsl-edma-objs := fsl-edma-main.o fsl-edma-common.o ${fsl-edma-trace-y}
>> +fsl-edma-objs := fsl-edma-main.o fsl-edma-common.o ${fsl-edma-trace-y} ${mcf-edma-main-y}
>> obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
>> -mcf-edma-objs := mcf-edma-main.o fsl-edma-common.o ${fsl-edma-trace-y}
>> -obj-$(CONFIG_MCF_EDMA) += mcf-edma.o
>> obj-$(CONFIG_FSL_QDMA) += fsl-qdma.o
>> obj-$(CONFIG_FSL_RAID) += fsl_raid.o
>> obj-$(CONFIG_HISI_DMA) += hisi_dma.o
>> diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
>> index 3af4307873157..ac04a2ce4fa1f 100644
>> --- a/drivers/dma/fsl-edma-common.c
>> +++ b/drivers/dma/fsl-edma-common.c
>> @@ -888,4 +888,32 @@ void fsl_edma_setup_regs(struct fsl_edma_engine *edma)
>> }
>> }
>>
>> +static int __init fsl_edma_common_init(void)
>> +{
>> + int ret;
>> +
>> + ret = fsl_edma_init();
>> + if (ret)
>> + return ret;
>> +
>> +#ifdef CONFIG_MCF_EDMA
>> + ret = mcf_edma_init();
>> + if (ret)
>> + return ret;
>> +#endif
>> + return 0;
>> +}
>> +
>> +subsys_initcall(fsl_edma_common_init);
>> +
>> +static void __exit fsl_edma_common_exit(void)
>> +{
>> + fsl_edma_exit();
>> +
>> +#ifdef CONFIG_MCF_EDMA
>> + mcf_edma_exit();
>> +#endif
>> +}
>> +module_exit(fsl_edma_common_exit);
>> +
>> MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h
>> index ac66222c16040..dfbdcc922ceea 100644
>> --- a/drivers/dma/fsl-edma-common.h
>> +++ b/drivers/dma/fsl-edma-common.h
>> @@ -488,4 +488,9 @@ void fsl_edma_free_chan_resources(struct dma_chan *chan);
>> void fsl_edma_cleanup_vchan(struct dma_device *dmadev);
>> void fsl_edma_setup_regs(struct fsl_edma_engine *edma);
>>
>> +int __init fsl_edma_init(void);
>> +void __exit fsl_edma_exit(void);
>> +int __init mcf_edma_init(void);
>> +void __exit mcf_edma_exit(void);
>> +
>> #endif /* _FSL_EDMA_COMMON_H_ */
>> diff --git a/drivers/dma/fsl-edma-main.c b/drivers/dma/fsl-edma-main.c
>> index 391e4f13dfeb0..a1c3c4ed869c5 100644
>> --- a/drivers/dma/fsl-edma-main.c
>> +++ b/drivers/dma/fsl-edma-main.c
>> @@ -724,17 +724,15 @@ static struct platform_driver fsl_edma_driver = {
>> .remove_new = fsl_edma_remove,
>> };
>>
>> -static int __init fsl_edma_init(void)
>> +int __init fsl_edma_init(void)
>> {
>> return platform_driver_register(&fsl_edma_driver);
>> }
>> -subsys_initcall(fsl_edma_init);
>>
>> -static void __exit fsl_edma_exit(void)
>> +void __exit fsl_edma_exit(void)
>> {
>> platform_driver_unregister(&fsl_edma_driver);
>> }
>> -module_exit(fsl_edma_exit);
>>
>> MODULE_ALIAS("platform:fsl-edma");
>> MODULE_DESCRIPTION("Freescale eDMA engine driver");
>> diff --git a/drivers/dma/mcf-edma-main.c b/drivers/dma/mcf-edma-main.c
>> index 78c606f6d0026..d97991a1e9518 100644
>> --- a/drivers/dma/mcf-edma-main.c
>> +++ b/drivers/dma/mcf-edma-main.c
>> @@ -284,17 +284,15 @@ bool mcf_edma_filter_fn(struct dma_chan *chan, void *param)
>> }
>> EXPORT_SYMBOL(mcf_edma_filter_fn);
>>
>> -static int __init mcf_edma_init(void)
>> +int __init mcf_edma_init(void)
>> {
>> return platform_driver_register(&mcf_edma_driver);
>> }
>> -subsys_initcall(mcf_edma_init);
>>
>> -static void __exit mcf_edma_exit(void)
>> +void __exit mcf_edma_exit(void)
>> {
>> platform_driver_unregister(&mcf_edma_driver);
>> }
>> -module_exit(mcf_edma_exit);
>>
>> MODULE_ALIAS("platform:mcf-edma");
>> MODULE_DESCRIPTION("Freescale eDMA engine driver, ColdFire family");
>> --
>> 2.34.1
Regards,
angelo
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/1] dmaengine: fsl-edma: merge mcf-edma into fsl-edma driver
2024-05-14 7:57 ` Angelo Dureghello
@ 2024-05-14 16:16 ` Frank Li
2024-05-15 8:17 ` Angelo Dureghello
0 siblings, 1 reply; 5+ messages in thread
From: Frank Li @ 2024-05-14 16:16 UTC (permalink / raw)
To: Angelo Dureghello
Cc: Geert Uytterhoeven, Vinod Koul,
open list:DMA GENERIC OFFLOAD ENGINE SUBSYSTEM, open list,
open list:FREESCALE eDMA DRIVER, Greg Ungerer, linux-m68k
On Tue, May 14, 2024 at 09:57:09AM +0200, Angelo Dureghello wrote:
> Hi,
>
> On 13/05/24 8:12 PM, Geert Uytterhoeven wrote:
> > CC coldfire
> >
> > On Thu, May 9, 2024 at 9:35 PM Frank Li <Frank.Li@nxp.com> wrote:
> > > MCF eDMA are almost the same as FSL eDMA driver. Previously link to two
> > > kernel modules, fsl-edma.ko and mcf-edma.ko. These are not problem because
> > > mcf-edma is for m68k ARCH and FSL eDMA is for arm/arm64 ARCH. But often
> > > build both at PPC ARCH. It also makes sense to build two drivers at the
> > > same time. It causes many build warning because share a fsl-edma-common.o.
> > > such as:
> > >
> > > powerpc64le-linux-ld: warning: orphan section `.stubs' from `drivers/dma/fsl-edma-common.o' being placed in section `.stubs'
> > > powerpc64le-linux-ld: warning: orphan section `.stubs' from `drivers/dma/fsl-edma-trace.o' being placed in section `.stubs'
> > >
> > > Merge mcf-edma into fsl-edma driver. So use one driver (fsl-edma.ko) for
> > > MCF and FSL eDMA.
> > >
> > > mcf-edma.ko should be replaced by fsl-edma.ko in modules, minimizing user
> > > space impact because MCF eDMA remains confined to legacy ColdFire mcf5441x
> > > production and mcf5441x has been in production for at least a decade and
> > > NXP has long ceased ColdFire development.
>
> when i developed mcf-edma, i tried to modify fsl-edma first. Modules are
> similar but there are various edma IP versions, and i remember minimal
> differences in the CF version too, some register bits and, of course,
> endianness.
>
> If a merge is possible, welcome, i have here mcf5441x, can give a try to
> this patch as soon as i can.
Thanks. I am not sure if recent eDMAv3 and eDMAv5 patch impact mcf5441.
eDMAv3 is quite big change. If you can test on mcf5441x, can I send to you
a futher clean up for mcf5441x? This patch are just simple glue two
driver together to avoid a build warning.
>
>
> > > Update Kconfig to make MCF_EDMA as feature of FSL_EDMA and change Makefile
> > > to link mcl-edma-main.o to fsl-edma.o.
> > >
> > > Create a common module init/exit functions, which call original's
> > > fsl-edma-init[exit]() and mcf-edma-init[exit]().
> > >
> > > Reported-by: kernel test robot <lkp@intel.com>
> > > Closes: https://lore.kernel.org/oe-kbuild-all/202405082029.Es9umH7n-lkp@intel.com/
> > > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > > ---
> > > drivers/dma/Kconfig | 8 ++++----
> > > drivers/dma/Makefile | 5 ++---
> > > drivers/dma/fsl-edma-common.c | 28 ++++++++++++++++++++++++++++
> > > drivers/dma/fsl-edma-common.h | 5 +++++
> > > drivers/dma/fsl-edma-main.c | 6 ++----
> > > drivers/dma/mcf-edma-main.c | 6 ++----
> > > 6 files changed, 43 insertions(+), 15 deletions(-)
> > >
> > > diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
> > > index 002a5ec806207..45110520f6e68 100644
> > > --- a/drivers/dma/Kconfig
> > > +++ b/drivers/dma/Kconfig
> > > @@ -393,14 +393,14 @@ config LS2X_APB_DMA
> > > It does not support memory to memory data transfer.
> > >
> > > config MCF_EDMA
> > > - tristate "Freescale eDMA engine support, ColdFire mcf5441x SoCs"
> > > + bool "Freescale eDMA engine support, ColdFire mcf5441x SoCs"
> > > depends on M5441x || COMPILE_TEST
> > > select DMA_ENGINE
> > > select DMA_VIRTUAL_CHANNELS
> > > help
> > > - Support the Freescale ColdFire eDMA engine, 64-channel
> > > - implementation that performs complex data transfers with
> > > - minimal intervention from a host processor.
> > > + Support the Freescale ColdFire eDMA engine in FSL_EDMA driver,
> > > + 64-channel implementation that performs complex data transfers
> > > + with minimal intervention from a host processor.
> > > This module can be found on Freescale ColdFire mcf5441x SoCs.
> > >
> > > config MILBEAUT_HDMAC
> > > diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
> > > index 802ca916f05f5..0000922c7cbfe 100644
> > > --- a/drivers/dma/Makefile
> > > +++ b/drivers/dma/Makefile
> > > @@ -33,11 +33,10 @@ obj-$(CONFIG_DW_EDMA) += dw-edma/
> > > obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
> > > fsl-edma-trace-$(CONFIG_TRACING) := fsl-edma-trace.o
> > > CFLAGS_fsl-edma-trace.o := -I$(src)
> > > +mcf-edma-main-$(CONFIG_MCF_EDMA) := mcf-edma-main.o
> > > obj-$(CONFIG_FSL_DMA) += fsldma.o
> > > -fsl-edma-objs := fsl-edma-main.o fsl-edma-common.o ${fsl-edma-trace-y}
> > > +fsl-edma-objs := fsl-edma-main.o fsl-edma-common.o ${fsl-edma-trace-y} ${mcf-edma-main-y}
> > > obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
> > > -mcf-edma-objs := mcf-edma-main.o fsl-edma-common.o ${fsl-edma-trace-y}
> > > -obj-$(CONFIG_MCF_EDMA) += mcf-edma.o
> > > obj-$(CONFIG_FSL_QDMA) += fsl-qdma.o
> > > obj-$(CONFIG_FSL_RAID) += fsl_raid.o
> > > obj-$(CONFIG_HISI_DMA) += hisi_dma.o
> > > diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
> > > index 3af4307873157..ac04a2ce4fa1f 100644
> > > --- a/drivers/dma/fsl-edma-common.c
> > > +++ b/drivers/dma/fsl-edma-common.c
> > > @@ -888,4 +888,32 @@ void fsl_edma_setup_regs(struct fsl_edma_engine *edma)
> > > }
> > > }
> > >
> > > +static int __init fsl_edma_common_init(void)
> > > +{
> > > + int ret;
> > > +
> > > + ret = fsl_edma_init();
> > > + if (ret)
> > > + return ret;
> > > +
> > > +#ifdef CONFIG_MCF_EDMA
> > > + ret = mcf_edma_init();
> > > + if (ret)
> > > + return ret;
> > > +#endif
> > > + return 0;
> > > +}
> > > +
> > > +subsys_initcall(fsl_edma_common_init);
> > > +
> > > +static void __exit fsl_edma_common_exit(void)
> > > +{
> > > + fsl_edma_exit();
> > > +
> > > +#ifdef CONFIG_MCF_EDMA
> > > + mcf_edma_exit();
> > > +#endif
> > > +}
> > > +module_exit(fsl_edma_common_exit);
> > > +
> > > MODULE_LICENSE("GPL v2");
> > > diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h
> > > index ac66222c16040..dfbdcc922ceea 100644
> > > --- a/drivers/dma/fsl-edma-common.h
> > > +++ b/drivers/dma/fsl-edma-common.h
> > > @@ -488,4 +488,9 @@ void fsl_edma_free_chan_resources(struct dma_chan *chan);
> > > void fsl_edma_cleanup_vchan(struct dma_device *dmadev);
> > > void fsl_edma_setup_regs(struct fsl_edma_engine *edma);
> > >
> > > +int __init fsl_edma_init(void);
> > > +void __exit fsl_edma_exit(void);
> > > +int __init mcf_edma_init(void);
> > > +void __exit mcf_edma_exit(void);
> > > +
> > > #endif /* _FSL_EDMA_COMMON_H_ */
> > > diff --git a/drivers/dma/fsl-edma-main.c b/drivers/dma/fsl-edma-main.c
> > > index 391e4f13dfeb0..a1c3c4ed869c5 100644
> > > --- a/drivers/dma/fsl-edma-main.c
> > > +++ b/drivers/dma/fsl-edma-main.c
> > > @@ -724,17 +724,15 @@ static struct platform_driver fsl_edma_driver = {
> > > .remove_new = fsl_edma_remove,
> > > };
> > >
> > > -static int __init fsl_edma_init(void)
> > > +int __init fsl_edma_init(void)
> > > {
> > > return platform_driver_register(&fsl_edma_driver);
> > > }
> > > -subsys_initcall(fsl_edma_init);
> > >
> > > -static void __exit fsl_edma_exit(void)
> > > +void __exit fsl_edma_exit(void)
> > > {
> > > platform_driver_unregister(&fsl_edma_driver);
> > > }
> > > -module_exit(fsl_edma_exit);
> > >
> > > MODULE_ALIAS("platform:fsl-edma");
> > > MODULE_DESCRIPTION("Freescale eDMA engine driver");
> > > diff --git a/drivers/dma/mcf-edma-main.c b/drivers/dma/mcf-edma-main.c
> > > index 78c606f6d0026..d97991a1e9518 100644
> > > --- a/drivers/dma/mcf-edma-main.c
> > > +++ b/drivers/dma/mcf-edma-main.c
> > > @@ -284,17 +284,15 @@ bool mcf_edma_filter_fn(struct dma_chan *chan, void *param)
> > > }
> > > EXPORT_SYMBOL(mcf_edma_filter_fn);
> > >
> > > -static int __init mcf_edma_init(void)
> > > +int __init mcf_edma_init(void)
> > > {
> > > return platform_driver_register(&mcf_edma_driver);
> > > }
> > > -subsys_initcall(mcf_edma_init);
> > >
> > > -static void __exit mcf_edma_exit(void)
> > > +void __exit mcf_edma_exit(void)
> > > {
> > > platform_driver_unregister(&mcf_edma_driver);
> > > }
> > > -module_exit(mcf_edma_exit);
> > >
> > > MODULE_ALIAS("platform:mcf-edma");
> > > MODULE_DESCRIPTION("Freescale eDMA engine driver, ColdFire family");
> > > --
> > > 2.34.1
>
> Regards,
> angelo
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/1] dmaengine: fsl-edma: merge mcf-edma into fsl-edma driver
2024-05-14 16:16 ` Frank Li
@ 2024-05-15 8:17 ` Angelo Dureghello
0 siblings, 0 replies; 5+ messages in thread
From: Angelo Dureghello @ 2024-05-15 8:17 UTC (permalink / raw)
To: Frank Li
Cc: Geert Uytterhoeven, Vinod Koul,
open list:DMA GENERIC OFFLOAD ENGINE SUBSYSTEM, open list,
open list:FREESCALE eDMA DRIVER, Greg Ungerer, linux-m68k
Hi,
On 14/05/24 6:16 PM, Frank Li wrote:
> On Tue, May 14, 2024 at 09:57:09AM +0200, Angelo Dureghello wrote:
>> Hi,
>>
>> On 13/05/24 8:12 PM, Geert Uytterhoeven wrote:
>>> CC coldfire
>>>
>>> On Thu, May 9, 2024 at 9:35 PM Frank Li <Frank.Li@nxp.com> wrote:
>>>> MCF eDMA are almost the same as FSL eDMA driver. Previously link to two
>>>> kernel modules, fsl-edma.ko and mcf-edma.ko. These are not problem because
>>>> mcf-edma is for m68k ARCH and FSL eDMA is for arm/arm64 ARCH. But often
>>>> build both at PPC ARCH. It also makes sense to build two drivers at the
>>>> same time. It causes many build warning because share a fsl-edma-common.o.
>>>> such as:
>>>>
>>>> powerpc64le-linux-ld: warning: orphan section `.stubs' from `drivers/dma/fsl-edma-common.o' being placed in section `.stubs'
>>>> powerpc64le-linux-ld: warning: orphan section `.stubs' from `drivers/dma/fsl-edma-trace.o' being placed in section `.stubs'
>>>>
>>>> Merge mcf-edma into fsl-edma driver. So use one driver (fsl-edma.ko) for
>>>> MCF and FSL eDMA.
>>>>
>>>> mcf-edma.ko should be replaced by fsl-edma.ko in modules, minimizing user
>>>> space impact because MCF eDMA remains confined to legacy ColdFire mcf5441x
>>>> production and mcf5441x has been in production for at least a decade and
>>>> NXP has long ceased ColdFire development.
>> when i developed mcf-edma, i tried to modify fsl-edma first. Modules are
>> similar but there are various edma IP versions, and i remember minimal
>> differences in the CF version too, some register bits and, of course,
>> endianness.
>>
>> If a merge is possible, welcome, i have here mcf5441x, can give a try to
>> this patch as soon as i can.
> Thanks. I am not sure if recent eDMAv3 and eDMAv5 patch impact mcf5441.
> eDMAv3 is quite big change. If you can test on mcf5441x, can I send to you
> a futher clean up for mcf5441x?
sure
> This patch are just simple glue two
> driver together to avoid a build warning.
>>
>>>> Update Kconfig to make MCF_EDMA as feature of FSL_EDMA and change Makefile
>>>> to link mcl-edma-main.o to fsl-edma.o.
>>>>
>>>> Create a common module init/exit functions, which call original's
>>>> fsl-edma-init[exit]() and mcf-edma-init[exit]().
>>>>
>>>> Reported-by: kernel test robot <lkp@intel.com>
>>>> Closes: https://lore.kernel.org/oe-kbuild-all/202405082029.Es9umH7n-lkp@intel.com/
>>>> Signed-off-by: Frank Li <Frank.Li@nxp.com>
>>>> ---
>>>> drivers/dma/Kconfig | 8 ++++----
>>>> drivers/dma/Makefile | 5 ++---
>>>> drivers/dma/fsl-edma-common.c | 28 ++++++++++++++++++++++++++++
>>>> drivers/dma/fsl-edma-common.h | 5 +++++
>>>> drivers/dma/fsl-edma-main.c | 6 ++----
>>>> drivers/dma/mcf-edma-main.c | 6 ++----
>>>> 6 files changed, 43 insertions(+), 15 deletions(-)
>>>>
>>>> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
>>>> index 002a5ec806207..45110520f6e68 100644
>>>> --- a/drivers/dma/Kconfig
>>>> +++ b/drivers/dma/Kconfig
>>>> @@ -393,14 +393,14 @@ config LS2X_APB_DMA
>>>> It does not support memory to memory data transfer.
>>>>
>>>> config MCF_EDMA
>>>> - tristate "Freescale eDMA engine support, ColdFire mcf5441x SoCs"
>>>> + bool "Freescale eDMA engine support, ColdFire mcf5441x SoCs"
>>>> depends on M5441x || COMPILE_TEST
>>>> select DMA_ENGINE
>>>> select DMA_VIRTUAL_CHANNELS
>>>> help
>>>> - Support the Freescale ColdFire eDMA engine, 64-channel
>>>> - implementation that performs complex data transfers with
>>>> - minimal intervention from a host processor.
>>>> + Support the Freescale ColdFire eDMA engine in FSL_EDMA driver,
>>>> + 64-channel implementation that performs complex data transfers
>>>> + with minimal intervention from a host processor.
>>>> This module can be found on Freescale ColdFire mcf5441x SoCs.
>>>>
>>>> config MILBEAUT_HDMAC
>>>> diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
>>>> index 802ca916f05f5..0000922c7cbfe 100644
>>>> --- a/drivers/dma/Makefile
>>>> +++ b/drivers/dma/Makefile
>>>> @@ -33,11 +33,10 @@ obj-$(CONFIG_DW_EDMA) += dw-edma/
>>>> obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
>>>> fsl-edma-trace-$(CONFIG_TRACING) := fsl-edma-trace.o
>>>> CFLAGS_fsl-edma-trace.o := -I$(src)
>>>> +mcf-edma-main-$(CONFIG_MCF_EDMA) := mcf-edma-main.o
>>>> obj-$(CONFIG_FSL_DMA) += fsldma.o
>>>> -fsl-edma-objs := fsl-edma-main.o fsl-edma-common.o ${fsl-edma-trace-y}
>>>> +fsl-edma-objs := fsl-edma-main.o fsl-edma-common.o ${fsl-edma-trace-y} ${mcf-edma-main-y}
>>>> obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
>>>> -mcf-edma-objs := mcf-edma-main.o fsl-edma-common.o ${fsl-edma-trace-y}
>>>> -obj-$(CONFIG_MCF_EDMA) += mcf-edma.o
>>>> obj-$(CONFIG_FSL_QDMA) += fsl-qdma.o
>>>> obj-$(CONFIG_FSL_RAID) += fsl_raid.o
>>>> obj-$(CONFIG_HISI_DMA) += hisi_dma.o
>>>> diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
>>>> index 3af4307873157..ac04a2ce4fa1f 100644
>>>> --- a/drivers/dma/fsl-edma-common.c
>>>> +++ b/drivers/dma/fsl-edma-common.c
>>>> @@ -888,4 +888,32 @@ void fsl_edma_setup_regs(struct fsl_edma_engine *edma)
>>>> }
>>>> }
>>>>
>>>> +static int __init fsl_edma_common_init(void)
>>>> +{
>>>> + int ret;
>>>> +
>>>> + ret = fsl_edma_init();
>>>> + if (ret)
>>>> + return ret;
>>>> +
>>>> +#ifdef CONFIG_MCF_EDMA
>>>> + ret = mcf_edma_init();
>>>> + if (ret)
>>>> + return ret;
>>>> +#endif
>>>> + return 0;
>>>> +}
>>>> +
>>>> +subsys_initcall(fsl_edma_common_init);
>>>> +
>>>> +static void __exit fsl_edma_common_exit(void)
>>>> +{
>>>> + fsl_edma_exit();
>>>> +
>>>> +#ifdef CONFIG_MCF_EDMA
>>>> + mcf_edma_exit();
>>>> +#endif
>>>> +}
>>>> +module_exit(fsl_edma_common_exit);
>>>> +
>>>> MODULE_LICENSE("GPL v2");
>>>> diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h
>>>> index ac66222c16040..dfbdcc922ceea 100644
>>>> --- a/drivers/dma/fsl-edma-common.h
>>>> +++ b/drivers/dma/fsl-edma-common.h
>>>> @@ -488,4 +488,9 @@ void fsl_edma_free_chan_resources(struct dma_chan *chan);
>>>> void fsl_edma_cleanup_vchan(struct dma_device *dmadev);
>>>> void fsl_edma_setup_regs(struct fsl_edma_engine *edma);
>>>>
>>>> +int __init fsl_edma_init(void);
>>>> +void __exit fsl_edma_exit(void);
>>>> +int __init mcf_edma_init(void);
>>>> +void __exit mcf_edma_exit(void);
>>>> +
>>>> #endif /* _FSL_EDMA_COMMON_H_ */
>>>> diff --git a/drivers/dma/fsl-edma-main.c b/drivers/dma/fsl-edma-main.c
>>>> index 391e4f13dfeb0..a1c3c4ed869c5 100644
>>>> --- a/drivers/dma/fsl-edma-main.c
>>>> +++ b/drivers/dma/fsl-edma-main.c
>>>> @@ -724,17 +724,15 @@ static struct platform_driver fsl_edma_driver = {
>>>> .remove_new = fsl_edma_remove,
>>>> };
>>>>
>>>> -static int __init fsl_edma_init(void)
>>>> +int __init fsl_edma_init(void)
>>>> {
>>>> return platform_driver_register(&fsl_edma_driver);
>>>> }
>>>> -subsys_initcall(fsl_edma_init);
>>>>
>>>> -static void __exit fsl_edma_exit(void)
>>>> +void __exit fsl_edma_exit(void)
>>>> {
>>>> platform_driver_unregister(&fsl_edma_driver);
>>>> }
>>>> -module_exit(fsl_edma_exit);
>>>>
>>>> MODULE_ALIAS("platform:fsl-edma");
>>>> MODULE_DESCRIPTION("Freescale eDMA engine driver");
>>>> diff --git a/drivers/dma/mcf-edma-main.c b/drivers/dma/mcf-edma-main.c
>>>> index 78c606f6d0026..d97991a1e9518 100644
>>>> --- a/drivers/dma/mcf-edma-main.c
>>>> +++ b/drivers/dma/mcf-edma-main.c
>>>> @@ -284,17 +284,15 @@ bool mcf_edma_filter_fn(struct dma_chan *chan, void *param)
>>>> }
>>>> EXPORT_SYMBOL(mcf_edma_filter_fn);
>>>>
>>>> -static int __init mcf_edma_init(void)
>>>> +int __init mcf_edma_init(void)
>>>> {
>>>> return platform_driver_register(&mcf_edma_driver);
>>>> }
>>>> -subsys_initcall(mcf_edma_init);
>>>>
>>>> -static void __exit mcf_edma_exit(void)
>>>> +void __exit mcf_edma_exit(void)
>>>> {
>>>> platform_driver_unregister(&mcf_edma_driver);
>>>> }
>>>> -module_exit(mcf_edma_exit);
>>>>
>>>> MODULE_ALIAS("platform:mcf-edma");
>>>> MODULE_DESCRIPTION("Freescale eDMA engine driver, ColdFire family");
>>>> --
>>>> 2.34.1
>> Regards,
>> angelo
>>
Regards,
angelo
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2024-05-15 8:18 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-05-09 19:35 [PATCH 1/1] dmaengine: fsl-edma: merge mcf-edma into fsl-edma driver Frank Li
2024-05-13 18:12 ` Geert Uytterhoeven
2024-05-14 7:57 ` Angelo Dureghello
2024-05-14 16:16 ` Frank Li
2024-05-15 8:17 ` Angelo Dureghello
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).