[PATCH v2 0/3] Add support rockchip RGB output interface

[PATCH v2 0/3] Add support rockchip RGB output interface

[Sandy Huang]

This patches add support rockchip RGB output, Some Rockchip CRTCs, like rv1108,
can directly output parallel and serial RGB data to panel or to conversion chip.
So we add this driver to probe encoder and connector to support this case.

Sandy Huang (3):
  dt-bindings: Add document for rockchip RGB output interface
  drm/rockchip: Add support for Rockchip Soc RGB output interface
  drm/rockchip: vop: Add more RGB output interface type

 .../bindings/display/rockchip/rockchip-rgb.txt     |  78 +++++
 drivers/gpu/drm/rockchip/Kconfig                   |   9 +
 drivers/gpu/drm/rockchip/Makefile                  |   1 +
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c        |   2 +
 drivers/gpu/drm/rockchip/rockchip_drm_drv.h        |   1 +
 drivers/gpu/drm/rockchip/rockchip_drm_vop.h        |   2 +
 drivers/gpu/drm/rockchip/rockchip_rgb.c            | 343 +++++++++++++++++++++
 7 files changed, 436 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_rgb.c

-- 
2.7.4


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 1/3] dt-bindings: Add document for rockchip RGB output interface

[Sandy Huang]

This path add support rv1108 rgb output interface driver.

Signed-off-by: Sandy Huang <hjc@rock-chips.com>
---
Changes in v2:
 1. rename rockchip,rgb-mode to rgb-mode;
 2. delete reg for signle endpoint;

 .../bindings/display/rockchip/rockchip-rgb.txt     | 78 ++++++++++++++++++++++
 1 file changed, 78 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt
new file mode 100644
index 0000000..86bd1ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt
@@ -0,0 +1,78 @@
+Rockchip RV1108 RGB interface
+================================
+
+Required properties:
+- compatible: matching the soc type:
+	- "rockchip,rv1108-rgb";
+
+Optional properties:
+- pinctrl-names: must contain a "lcdc" entry.
+- pinctrl-0: pin control group to be used for this interface.
+
+Required nodes:
+- rgb-mode: should be "p888", "p666", "p565", "s888", "s888-dummy"
+	- p888: output r8-g8-b8 at each dclk cycle for per-pixel
+	- p666: output r6-g6-b6 at each dclk cycle for per-pixel
+	- p565: output r5-g6-b5 at each dclk cycle for per-pixel
+	- s888: output r8-g8-b8 in three dclk cycle for per-pixel
+	- s888-dmmy: output r8-g8-b8-dummy in four dclk cycle for per-pixel
+
+The rgb has two video ports described by:
+	Documentation/devicetree/bindings/media/video-interfaces.txt
+Their connections are modeled using the OF graph bindings specified in
+	Documentation/devicetree/bindings/graph.txt.
+
+- video port 0 for the VOP input, the remote endpoint maybe vopb/vopl/vop
+- video port 1 for either a panel or subsequent encoder
+
+the panel described by:
+	Documentation/devicetree/bindings/display/panel/simple-panel.txt
+Panel other required properties:
+- ports for remote rgb output.
+
+Example:
+
+panel: panel {
+	compatible = "auo,b101ean01";
+	enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+
+	ports {
+		panel_in_rgb: endpoint {
+			remote-endpoint = <&rgb_out_panel>;
+		};
+	};
+};
+
+For Rockchip RV1108:
+
+	rgb: rgb {
+		compatible = "rockchip,rv1108-rgb";
+		pinctrl-names = "lcdc";
+		pinctrl-0 = <&lcdc_ctl>;
+		rgb-mode = "p888";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgb_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				rgb_in_vop: endpoint {
+					remote-endpoint = <&vop_out_rgb>;
+				};
+			};
+
+			rgb_out: port@1 {
+				reg = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				rgb_out_panel: endpoint {
+					remote-endpoint = <&panel_in_rgb>;
+				};
+			};
+		};
+	};
-- 
2.7.4

[PATCH v2 2/3] drm/rockchip: Add support for Rockchip Soc RGB output interface

[Sandy Huang]

Some Rockchip CRTCs, like rv1108, can directly output parallel and
serial RGB data to panel or conversion chip, so we add this driver to
probe encoder and connector.

Signed-off-by: Sandy Huang <hjc@rock-chips.com>
---
Changes in v2:
  1. add error log when probe failed;
  2. update name_to_output_mode() according to sean's suggest;
  3. Fix uninitialized use of ret.

 drivers/gpu/drm/rockchip/Kconfig            |   9 +
 drivers/gpu/drm/rockchip/Makefile           |   1 +
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c |   2 +
 drivers/gpu/drm/rockchip/rockchip_drm_drv.h |   1 +
 drivers/gpu/drm/rockchip/rockchip_rgb.c     | 343 ++++++++++++++++++++++++++++
 5 files changed, 356 insertions(+)
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_rgb.c

diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 0c31f0a..85c7cc5 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -8,6 +8,7 @@ config DRM_ROCKCHIP
 	select DRM_ANALOGIX_DP if ROCKCHIP_ANALOGIX_DP
 	select DRM_DW_HDMI if ROCKCHIP_DW_HDMI
 	select DRM_MIPI_DSI if ROCKCHIP_DW_MIPI_DSI
+	select DRM_RGB if ROCKCHIP_RGB
 	select SND_SOC_HDMI_CODEC if ROCKCHIP_CDN_DP && SND_SOC
 	help
 	  Choose this option if you have a Rockchip soc chipset.
@@ -65,4 +66,12 @@ config ROCKCHIP_LVDS
 	  Rockchip rk3288 SoC has LVDS TX Controller can be used, and it
 	  support LVDS, rgb, dual LVDS output mode. say Y to enable its
 	  driver.
+
+config ROCKCHIP_RGB
+	bool "Rockchip RGB support"
+	help
+	  Choose this option to enable support for Rockchip RGB output.
+	  Some Rockchip CRTCs, like rv1108, can directly output parallel
+	  and serial RGB format to panel or connect to a conversion chip.
+	  say Y to enable its driver.
 endif
diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
index a881d2c..f32a17f 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -13,5 +13,6 @@ rockchipdrm-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
 rockchipdrm-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi.o
 rockchipdrm-$(CONFIG_ROCKCHIP_INNO_HDMI) += inno_hdmi.o
 rockchipdrm-$(CONFIG_ROCKCHIP_LVDS) += rockchip_lvds.o
+rockchipdrm-$(CONFIG_ROCKCHIP_RGB) += rockchip_rgb.o
 
 obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
index 83cfcfe..1f9aae6 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
@@ -451,6 +451,8 @@ static int __init rockchip_drm_init(void)
 				CONFIG_ROCKCHIP_LVDS);
 	ADD_ROCKCHIP_SUB_DRIVER(rockchip_dp_driver,
 				CONFIG_ROCKCHIP_ANALOGIX_DP);
+	ADD_ROCKCHIP_SUB_DRIVER(rockchip_rgb_driver,
+				CONFIG_ROCKCHIP_RGB);
 	ADD_ROCKCHIP_SUB_DRIVER(cdn_dp_driver, CONFIG_ROCKCHIP_CDN_DP);
 	ADD_ROCKCHIP_SUB_DRIVER(dw_hdmi_rockchip_pltfm_driver,
 				CONFIG_ROCKCHIP_DW_HDMI);
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
index 498dfbc..6b0ec7e 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
@@ -70,5 +70,6 @@ extern struct platform_driver dw_mipi_dsi_driver;
 extern struct platform_driver inno_hdmi_driver;
 extern struct platform_driver rockchip_dp_driver;
 extern struct platform_driver rockchip_lvds_driver;
+extern struct platform_driver rockchip_rgb_driver;
 extern struct platform_driver vop_platform_driver;
 #endif /* _ROCKCHIP_DRM_DRV_H_ */
diff --git a/drivers/gpu/drm/rockchip/rockchip_rgb.c b/drivers/gpu/drm/rockchip/rockchip_rgb.c
new file mode 100644
index 0000000..b16e1c5
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/rockchip_rgb.c
@@ -0,0 +1,343 @@
+/*
+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+ * Author:
+ *      Sandy Huang <hjc@rock-chips.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_of.h>
+
+#include <linux/component.h>
+#include <linux/of_graph.h>
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_vop.h"
+
+#define connector_to_rgb(c) container_of(c, struct rockchip_rgb, connector)
+#define encoder_to_rgb(c) container_of(c, struct rockchip_rgb, encoder)
+
+struct rockchip_rgb {
+	struct device *dev;
+	struct drm_device *drm_dev;
+	struct drm_panel *panel;
+	struct drm_bridge *bridge;
+	struct drm_connector connector;
+	struct drm_encoder encoder;
+	struct dev_pin_info *pins;
+	int output_mode;
+};
+
+static inline int name_to_output_mode(const char *s)
+{
+	static const struct {
+		const char *name;
+		int format;
+	} formats[] = {
+		{ "p888", ROCKCHIP_OUT_MODE_P888 },
+		{ "p666", ROCKCHIP_OUT_MODE_P666 },
+		{ "p565", ROCKCHIP_OUT_MODE_P565 },
+		{ "s888", ROCKCHIP_OUT_MODE_S888 },
+		{ "s888_dummy", ROCKCHIP_OUT_MODE_S888_DUMMY }
+	};
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(formats); i++)
+		if (!strncmp(s, formats[i].name, strlen(formats[i].name)))
+			return formats[i].format;
+
+	return -EINVAL;
+}
+
+static const struct drm_connector_funcs rockchip_rgb_connector_funcs = {
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int rockchip_rgb_connector_get_modes(struct drm_connector *connector)
+{
+	struct rockchip_rgb *rgb = connector_to_rgb(connector);
+	struct drm_panel *panel = rgb->panel;
+
+	return drm_panel_get_modes(panel);
+}
+
+static const
+struct drm_connector_helper_funcs rockchip_rgb_connector_helper_funcs = {
+	.get_modes = rockchip_rgb_connector_get_modes,
+};
+
+static void rockchip_rgb_encoder_enable(struct drm_encoder *encoder)
+{
+	struct rockchip_rgb *rgb = encoder_to_rgb(encoder);
+
+	drm_panel_prepare(rgb->panel);
+	/* iomux to LCD data/sync mode */
+	if (rgb->pins && !IS_ERR(rgb->pins->default_state))
+		pinctrl_select_state(rgb->pins->p, rgb->pins->default_state);
+
+	drm_panel_enable(rgb->panel);
+}
+
+static void rockchip_rgb_encoder_disable(struct drm_encoder *encoder)
+{
+	struct rockchip_rgb *rgb = encoder_to_rgb(encoder);
+
+	drm_panel_disable(rgb->panel);
+	drm_panel_unprepare(rgb->panel);
+}
+
+static int
+rockchip_rgb_encoder_atomic_check(struct drm_encoder *encoder,
+				   struct drm_crtc_state *crtc_state,
+				   struct drm_connector_state *conn_state)
+{
+	struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
+	struct rockchip_rgb *rgb = encoder_to_rgb(encoder);
+
+	s->output_mode = rgb->output_mode;
+	s->output_type = DRM_MODE_CONNECTOR_LVDS;
+
+	return 0;
+}
+
+static const
+struct drm_encoder_helper_funcs rockchip_rgb_encoder_helper_funcs = {
+	.enable = rockchip_rgb_encoder_enable,
+	.disable = rockchip_rgb_encoder_disable,
+	.atomic_check = rockchip_rgb_encoder_atomic_check,
+};
+
+static const struct drm_encoder_funcs rockchip_rgb_encoder_funcs = {
+	.destroy = drm_encoder_cleanup,
+};
+
+static const struct of_device_id rockchip_rgb_dt_ids[] = {
+	{
+		.compatible = "rockchip,rv1108-rgb",
+	},
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_rgb_dt_ids);
+
+static int rockchip_rgb_bind(struct device *dev, struct device *master,
+			     void *data)
+{
+	struct rockchip_rgb *rgb = dev_get_drvdata(dev);
+	struct drm_device *drm_dev = data;
+	struct drm_encoder *encoder;
+	struct drm_connector *connector;
+	struct device_node *remote = NULL;
+	struct device_node  *port, *endpoint;
+	u32 endpoint_id;
+	const char *name;
+	int ret = 0, child_count = 0;
+
+	rgb->drm_dev = drm_dev;
+	port = of_graph_get_port_by_id(dev->of_node, 1);
+	if (!port) {
+		DRM_DEV_ERROR(dev,
+			      "can't found port point, please init rgb panel port!\n");
+		return -EINVAL;
+	}
+	for_each_child_of_node(port, endpoint) {
+		child_count++;
+		if (of_property_read_u32(endpoint, "reg", &endpoint_id))
+			endpoint_id = 0;
+		ret = drm_of_find_panel_or_bridge(dev->of_node, 1, endpoint_id,
+						  &rgb->panel, &rgb->bridge);
+		if (!ret)
+			break;
+	}
+	if (!child_count) {
+		DRM_DEV_ERROR(dev, "rgb port does not have any children\n");
+		ret = -EINVAL;
+		goto err_put_port;
+	} else if (ret) {
+		DRM_DEV_ERROR(dev, "failed to find panel and bridge node\n");
+		ret = -EPROBE_DEFER;
+		goto err_put_port;
+	}
+	if (rgb->panel)
+		remote = rgb->panel->dev->of_node;
+	else
+		remote = rgb->bridge->of_node;
+	if (of_property_read_string(dev->of_node, "rgb-mode", &name))
+		/* default set it as output mode P888 */
+		rgb->output_mode = ROCKCHIP_OUT_MODE_P888;
+	else
+		rgb->output_mode = name_to_output_mode(name);
+	if (rgb->output_mode < 0) {
+		DRM_DEV_ERROR(dev, "invalid rockchip,rgb-mode [%s]\n", name);
+		ret = rgb->output_mode;
+		goto err_put_remote;
+	}
+
+	encoder = &rgb->encoder;
+	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev,
+							     dev->of_node);
+
+	ret = drm_encoder_init(drm_dev, encoder, &rockchip_rgb_encoder_funcs,
+			       DRM_MODE_ENCODER_NONE, NULL);
+	if (ret < 0) {
+		DRM_DEV_ERROR(drm_dev->dev,
+			      "failed to initialize encoder: %d\n", ret);
+		goto err_put_remote;
+	}
+
+	drm_encoder_helper_add(encoder, &rockchip_rgb_encoder_helper_funcs);
+
+	if (rgb->panel) {
+		connector = &rgb->connector;
+		connector->dpms = DRM_MODE_DPMS_OFF;
+		ret = drm_connector_init(drm_dev, connector,
+					 &rockchip_rgb_connector_funcs,
+					 DRM_MODE_CONNECTOR_Unknown);
+		if (ret < 0) {
+			DRM_DEV_ERROR(drm_dev->dev,
+				      "failed to initialize connector: %d\n",
+				      ret);
+			goto err_free_encoder;
+		}
+
+		drm_connector_helper_add(connector,
+					 &rockchip_rgb_connector_helper_funcs);
+
+		ret = drm_mode_connector_attach_encoder(connector, encoder);
+		if (ret < 0) {
+			DRM_DEV_ERROR(drm_dev->dev,
+				      "failed to attach encoder: %d\n", ret);
+			goto err_free_connector;
+		}
+
+		ret = drm_panel_attach(rgb->panel, connector);
+		if (ret < 0) {
+			DRM_DEV_ERROR(drm_dev->dev,
+				      "failed to attach panel: %d\n", ret);
+			goto err_free_connector;
+		}
+	} else {
+		rgb->bridge->encoder = encoder;
+		ret = drm_bridge_attach(encoder, rgb->bridge, NULL);
+		if (ret) {
+			DRM_DEV_ERROR(drm_dev->dev,
+				      "failed to attach bridge: %d\n", ret);
+			goto err_free_encoder;
+		}
+		encoder->bridge = rgb->bridge;
+	}
+
+	of_node_put(remote);
+	of_node_put(port);
+
+	return 0;
+
+err_free_connector:
+	drm_connector_cleanup(connector);
+err_free_encoder:
+	drm_encoder_cleanup(encoder);
+err_put_remote:
+	of_node_put(remote);
+err_put_port:
+	of_node_put(port);
+
+	return ret;
+}
+
+static void rockchip_rgb_unbind(struct device *dev, struct device *master,
+				void *data)
+{
+	struct rockchip_rgb *rgb = dev_get_drvdata(dev);
+
+	rockchip_rgb_encoder_disable(&rgb->encoder);
+	if (rgb->panel)
+		drm_panel_detach(rgb->panel);
+	drm_connector_cleanup(&rgb->connector);
+	drm_encoder_cleanup(&rgb->encoder);
+}
+
+static const struct component_ops rockchip_rgb_component_ops = {
+	.bind = rockchip_rgb_bind,
+	.unbind = rockchip_rgb_unbind,
+};
+
+static int rockchip_rgb_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rockchip_rgb *rgb;
+	const struct of_device_id *match;
+	int ret;
+
+	if (!dev->of_node) {
+		DRM_DEV_ERROR(dev, "dev->of_node is null\n");
+		return -ENODEV;
+	}
+
+	rgb = devm_kzalloc(&pdev->dev, sizeof(*rgb), GFP_KERNEL);
+	if (!rgb)
+		return -ENOMEM;
+
+	rgb->dev = dev;
+	match = of_match_node(rockchip_rgb_dt_ids, dev->of_node);
+	if (!match) {
+		DRM_DEV_ERROR(dev, "match node failed\n");
+		return -ENODEV;
+	}
+
+	rgb->pins = devm_kzalloc(rgb->dev, sizeof(*rgb->pins), GFP_KERNEL);
+	if (!rgb->pins)
+		return -ENOMEM;
+	rgb->pins->p = devm_pinctrl_get(rgb->dev);
+	if (IS_ERR(rgb->pins->p)) {
+		DRM_DEV_ERROR(dev, "no pinctrl handle\n");
+		devm_kfree(rgb->dev, rgb->pins);
+		rgb->pins = NULL;
+	} else {
+		rgb->pins->default_state =
+			pinctrl_lookup_state(rgb->pins->p, "lcdc");
+		if (IS_ERR(rgb->pins->default_state)) {
+			DRM_DEV_ERROR(dev, "no default pinctrl state\n");
+			devm_kfree(rgb->dev, rgb->pins);
+			rgb->pins = NULL;
+		}
+	}
+
+	dev_set_drvdata(dev, rgb);
+	ret = component_add(&pdev->dev, &rockchip_rgb_component_ops);
+	if (ret < 0)
+		DRM_DEV_ERROR(dev, "failed to add component\n");
+
+	return ret;
+}
+
+static int rockchip_rgb_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &rockchip_rgb_component_ops);
+
+	return 0;
+}
+
+struct platform_driver rockchip_rgb_driver = {
+	.probe = rockchip_rgb_probe,
+	.remove = rockchip_rgb_remove,
+	.driver = {
+		   .name = "rockchip-rgb",
+		   .of_match_table = of_match_ptr(rockchip_rgb_dt_ids),
+	},
+};
-- 
2.7.4

[PATCH v2 3/3] drm/rockchip: vop: Add more RGB output interface type

[Sandy Huang]

This patch add serial RGB output interface for rockchip vop, the
more info about serial RGB output interface described at the
following file:

Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt

Signed-off-by: Sandy Huang <hjc@rock-chips.com>
---
No changes in v2:

 drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
index 56bbd2e..59a01c3 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
@@ -209,6 +209,8 @@ struct vop_data {
 #define ROCKCHIP_OUT_MODE_P888	0
 #define ROCKCHIP_OUT_MODE_P666	1
 #define ROCKCHIP_OUT_MODE_P565	2
+#define ROCKCHIP_OUT_MODE_S888	8
+#define ROCKCHIP_OUT_MODE_S888_DUMMY	12
 /* for use special outface */
 #define ROCKCHIP_OUT_MODE_AAAA	15
 
-- 
2.7.4


_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 0/3] Add support rockchip RGB output interface

[Sandy Huang]

Do you  have any suggests for this series of patches?
Or apply to drm-misc-next?

在 2017/9/22 11:00, Sandy Huang 写道:
> This patches add support rockchip RGB output, Some Rockchip CRTCs, like rv1108,
> can directly output parallel and serial RGB data to panel or to conversion chip.
> So we add this driver to probe encoder and connector to support this case.
> 
> Sandy Huang (3):
>    dt-bindings: Add document for rockchip RGB output interface
>    drm/rockchip: Add support for Rockchip Soc RGB output interface
>    drm/rockchip: vop: Add more RGB output interface type
> 
>   .../bindings/display/rockchip/rockchip-rgb.txt     |  78 +++++
>   drivers/gpu/drm/rockchip/Kconfig                   |   9 +
>   drivers/gpu/drm/rockchip/Makefile                  |   1 +
>   drivers/gpu/drm/rockchip/rockchip_drm_drv.c        |   2 +
>   drivers/gpu/drm/rockchip/rockchip_drm_drv.h        |   1 +
>   drivers/gpu/drm/rockchip/rockchip_drm_vop.h        |   2 +
>   drivers/gpu/drm/rockchip/rockchip_rgb.c            | 343 +++++++++++++++++++++
>   7 files changed, 436 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt
>   create mode 100644 drivers/gpu/drm/rockchip/rockchip_rgb.c
> 

Re: [PATCH v2 1/3] dt-bindings: Add document for rockchip RGB output interface

[Rob Herring]

On Fri, Sep 22, 2017 at 11:00:26AM +0800, Sandy Huang wrote:
> This path add support rv1108 rgb output interface driver.
> 
> Signed-off-by: Sandy Huang <hjc-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> ---
> Changes in v2:
>  1. rename rockchip,rgb-mode to rgb-mode;

You can't just drop the vendor. This needs to be documented in a common 
place that others will find and use. See panel-common.txt or 
panel-dpi.txt.

Alternatively, you could just drop it and let the panel compatible imply 
what the mode is. 


>  2. delete reg for signle endpoint;
> 
>  .../bindings/display/rockchip/rockchip-rgb.txt     | 78 ++++++++++++++++++++++
>  1 file changed, 78 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt
> new file mode 100644
> index 0000000..86bd1ce
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt
> @@ -0,0 +1,78 @@
> +Rockchip RV1108 RGB interface
> +================================
> +
> +Required properties:
> +- compatible: matching the soc type:
> +	- "rockchip,rv1108-rgb";
> +
> +Optional properties:
> +- pinctrl-names: must contain a "lcdc" entry.
> +- pinctrl-0: pin control group to be used for this interface.
> +
> +Required nodes:
> +- rgb-mode: should be "p888", "p666", "p565", "s888", "s888-dummy"
> +	- p888: output r8-g8-b8 at each dclk cycle for per-pixel
> +	- p666: output r6-g6-b6 at each dclk cycle for per-pixel
> +	- p565: output r5-g6-b5 at each dclk cycle for per-pixel
> +	- s888: output r8-g8-b8 in three dclk cycle for per-pixel
> +	- s888-dmmy: output r8-g8-b8-dummy in four dclk cycle for per-pixel
> +
> +The rgb has two video ports described by:
> +	Documentation/devicetree/bindings/media/video-interfaces.txt
> +Their connections are modeled using the OF graph bindings specified in
> +	Documentation/devicetree/bindings/graph.txt.
> +
> +- video port 0 for the VOP input, the remote endpoint maybe vopb/vopl/vop
> +- video port 1 for either a panel or subsequent encoder
> +
> +the panel described by:
> +	Documentation/devicetree/bindings/display/panel/simple-panel.txt
> +Panel other required properties:
> +- ports for remote rgb output.
> +
> +Example:
> +
> +panel: panel {
> +	compatible = "auo,b101ean01";
> +	enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
> +
> +	ports {
> +		panel_in_rgb: endpoint {
> +			remote-endpoint = <&rgb_out_panel>;
> +		};
> +	};
> +};
> +
> +For Rockchip RV1108:
> +
> +	rgb: rgb {
> +		compatible = "rockchip,rv1108-rgb";
> +		pinctrl-names = "lcdc";
> +		pinctrl-0 = <&lcdc_ctl>;
> +		rgb-mode = "p888";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			rgb_in: port@0 {
> +				reg = <0>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				rgb_in_vop: endpoint {
> +					remote-endpoint = <&vop_out_rgb>;
> +				};
> +			};
> +
> +			rgb_out: port@1 {
> +				reg = <1>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				rgb_out_panel: endpoint {
> +					remote-endpoint = <&panel_in_rgb>;
> +				};
> +			};
> +		};
> +	};
> -- 
> 2.7.4
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/3] dt-bindings: Add document for rockchip RGB output interface

[Sandy Huang]

Hi rob,
     Thanks for your reply.

在 2017/10/4 5:56, Rob Herring 写道:
> On Fri, Sep 22, 2017 at 11:00:26AM +0800, Sandy Huang wrote:
>> This path add support rv1108 rgb output interface driver.
>>
>> Signed-off-by: Sandy Huang <hjc@rock-chips.com>
>> ---
>> Changes in v2:
>>   1. rename rockchip,rgb-mode to rgb-mode;
> 
> You can't just drop the vendor. This needs to be documented in a common
> place that others will find and use. See panel-common.txt or
> panel-dpi.txt.
> 
> Alternatively, you could just drop it and let the panel compatible imply
> what the mode is.
> 
> 
ok, get it, i will move the rgb-mode to panel and describe it at 
panel-rgb.txt. the patches will be send soon later.

>>   2. delete reg for signle endpoint;
>>
>>   .../bindings/display/rockchip/rockchip-rgb.txt     | 78 ++++++++++++++++++++++
>>   1 file changed, 78 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt
>>
>> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt
>> new file mode 100644
>> index 0000000..86bd1ce
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt
>> @@ -0,0 +1,78 @@
>> +Rockchip RV1108 RGB interface
>> +================================
>> +
>> +Required properties:
>> +- compatible: matching the soc type:
>> +	- "rockchip,rv1108-rgb";
>> +
>> +Optional properties:
>> +- pinctrl-names: must contain a "lcdc" entry.
>> +- pinctrl-0: pin control group to be used for this interface.
>> +
>> +Required nodes:
>> +- rgb-mode: should be "p888", "p666", "p565", "s888", "s888-dummy"
>> +	- p888: output r8-g8-b8 at each dclk cycle for per-pixel
>> +	- p666: output r6-g6-b6 at each dclk cycle for per-pixel
>> +	- p565: output r5-g6-b5 at each dclk cycle for per-pixel
>> +	- s888: output r8-g8-b8 in three dclk cycle for per-pixel
>> +	- s888-dmmy: output r8-g8-b8-dummy in four dclk cycle for per-pixel
>> +
>> +The rgb has two video ports described by:
>> +	Documentation/devicetree/bindings/media/video-interfaces.txt
>> +Their connections are modeled using the OF graph bindings specified in
>> +	Documentation/devicetree/bindings/graph.txt.
>> +
>> +- video port 0 for the VOP input, the remote endpoint maybe vopb/vopl/vop
>> +- video port 1 for either a panel or subsequent encoder
>> +
>> +the panel described by:
>> +	Documentation/devicetree/bindings/display/panel/simple-panel.txt
>> +Panel other required properties:
>> +- ports for remote rgb output.
>> +
>> +Example:
>> +
>> +panel: panel {
>> +	compatible = "auo,b101ean01";
>> +	enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
>> +
>> +	ports {
>> +		panel_in_rgb: endpoint {
>> +			remote-endpoint = <&rgb_out_panel>;
>> +		};
>> +	};
>> +};
>> +
>> +For Rockchip RV1108:
>> +
>> +	rgb: rgb {
>> +		compatible = "rockchip,rv1108-rgb";
>> +		pinctrl-names = "lcdc";
>> +		pinctrl-0 = <&lcdc_ctl>;
>> +		rgb-mode = "p888";
>> +
>> +		ports {
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +
>> +			rgb_in: port@0 {
>> +				reg = <0>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +
>> +				rgb_in_vop: endpoint {
>> +					remote-endpoint = <&vop_out_rgb>;
>> +				};
>> +			};
>> +
>> +			rgb_out: port@1 {
>> +				reg = <1>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +
>> +				rgb_out_panel: endpoint {
>> +					remote-endpoint = <&panel_in_rgb>;
>> +				};
>> +			};
>> +		};
>> +	};
>> -- 
>> 2.7.4
>>
>>
> 
> 
> 

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 1/3] dt-bindings: Add document for rockchip RGB output interface

[Rob Herring]

On Mon, Oct 9, 2017 at 3:06 AM, Sandy Huang <hjc@rock-chips.com> wrote:
> Hi rob,
>     Thanks for your reply.
>
> 在 2017/10/4 5:56, Rob Herring 写道:
>>
>> On Fri, Sep 22, 2017 at 11:00:26AM +0800, Sandy Huang wrote:
>>>
>>> This path add support rv1108 rgb output interface driver.
>>>
>>> Signed-off-by: Sandy Huang <hjc@rock-chips.com>
>>> ---
>>> Changes in v2:
>>>   1. rename rockchip,rgb-mode to rgb-mode;
>>
>>
>> You can't just drop the vendor. This needs to be documented in a common
>> place that others will find and use. See panel-common.txt or
>> panel-dpi.txt.
>>
>> Alternatively, you could just drop it and let the panel compatible imply
>> what the mode is.
>>
>>
> ok, get it, i will move the rgb-mode to panel and describe it at
> panel-rgb.txt. the patches will be send soon later.

Don't create yet another common panel file. We already have
panel-dpi.txt which is for digital parallel interface.

Rob
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 1/3] dt-bindings: Add document for rockchip RGB output interface

[Sandy Huang]

在 2017/10/9 21:05, Rob Herring 写道:
> On Mon, Oct 9, 2017 at 3:06 AM, Sandy Huang <hjc-TNX95d0MmH7DzftRWevZcw@public.gmane.org> wrote:
>> Hi rob,
>>      Thanks for your reply.
>>
>> 在 2017/10/4 5:56, Rob Herring 写道:
>>>
>>> On Fri, Sep 22, 2017 at 11:00:26AM +0800, Sandy Huang wrote:
>>>>
>>>> This path add support rv1108 rgb output interface driver.
>>>>
>>>> Signed-off-by: Sandy Huang <hjc-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>>>> ---
>>>> Changes in v2:
>>>>    1. rename rockchip,rgb-mode to rgb-mode;
>>>
>>>
>>> You can't just drop the vendor. This needs to be documented in a common
>>> place that others will find and use. See panel-common.txt or
>>> panel-dpi.txt.
>>>
>>> Alternatively, you could just drop it and let the panel compatible imply
>>> what the mode is.
>>>
>>>
>> ok, get it, i will move the rgb-mode to panel and describe it at
>> panel-rgb.txt. the patches will be send soon later.
> 
> Don't create yet another common panel file. We already have
> panel-dpi.txt which is for digital parallel interface.
> The panel-rgb.txt define different rgb output format and timing, this is 
the detail info: https://patchwork.kernel.org/patch/9992241/
do you think this need move to panel-dpi.txt?
> Rob
> 
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html