From: Lubomir Rintel <lkundrak@v3.sk> To: Andrzej Hajda <a.hajda@samsung.com> Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, Jernej Skrabec <jernej.skrabec@siol.net>, Jonas Karlman <jonas@kwiboo.se>, David Airlie <airlied@linux.ie>, Neil Armstrong <narmstrong@baylibre.com>, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Lubomir Rintel <lkundrak@v3.sk>, Rob Herring <robh+dt@kernel.org>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Subject: [RESEND PATCH v2 2/3] dt-bindings: display: Add Chrontel CH7033 Video Encoder binding Date: Sat, 7 Mar 2020 20:07:59 +0100 [thread overview] Message-ID: <20200307190800.142658-3-lkundrak@v3.sk> (raw) In-Reply-To: <20200307190800.142658-1-lkundrak@v3.sk> Add binding document for the Chrontel CH7033 VGA/DVI/HDMI Encoder. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> --- Changes since v1: - Dual licensed with BSD-2-Clause - Collected Rob's reviewed-by tag .../display/bridge/chrontel,ch7033.yaml | 86 +++++++++++++++++++ 1 file changed, 86 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml diff --git a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml new file mode 100644 index 0000000000000..dc97f34fbfe0f --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk> +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/chrontel,ch7033.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Chrontel CH7033 Video Encoder Device Tree Bindings + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +properties: + compatible: + const: chrontel,ch7033 + + reg: + maxItems: 1 + description: I2C address of the device + + ports: + type: object + + properties: + port@0: + type: object + description: | + Video port for RGB input. + + port@1: + type: object + description: | + DVI port, should be connected to a node compatible with the + dvi-connector binding. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + dvi-connector { + compatible = "dvi-connector"; + ddc-i2c-bus = <&twsi5>; + hpd-gpios = <&gpio 62 GPIO_ACTIVE_LOW>; + digital; + analog; + + port { + dvi_in: endpoint { + remote-endpoint = <&encoder_out>; + }; + }; + }; + + vga-dvi-encoder@76 { + compatible = "chrontel,ch7033"; + reg = <0x76>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&lcd0_rgb_out>; + }; + }; + + encoder_out: port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dvi_in>; + }; + }; + + }; + }; -- 2.24.1 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Lubomir Rintel <lkundrak@v3.sk> To: Andrzej Hajda <a.hajda@samsung.com> Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, Jernej Skrabec <jernej.skrabec@siol.net>, Jonas Karlman <jonas@kwiboo.se>, David Airlie <airlied@linux.ie>, Neil Armstrong <narmstrong@baylibre.com>, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Lubomir Rintel <lkundrak@v3.sk>, Rob Herring <robh+dt@kernel.org>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Subject: [RESEND PATCH v2 2/3] dt-bindings: display: Add Chrontel CH7033 Video Encoder binding Date: Sat, 7 Mar 2020 20:07:59 +0100 [thread overview] Message-ID: <20200307190800.142658-3-lkundrak@v3.sk> (raw) Message-ID: <20200307190759.6O3bFJ8rTRBsqvVHj1M9gKGx9NxJGOLi9hzg5LGCNbU@z> (raw) In-Reply-To: <20200307190800.142658-1-lkundrak@v3.sk> Add binding document for the Chrontel CH7033 VGA/DVI/HDMI Encoder. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> --- Changes since v1: - Dual licensed with BSD-2-Clause - Collected Rob's reviewed-by tag .../display/bridge/chrontel,ch7033.yaml | 86 +++++++++++++++++++ 1 file changed, 86 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml diff --git a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml new file mode 100644 index 0000000000000..dc97f34fbfe0f --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk> +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/chrontel,ch7033.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Chrontel CH7033 Video Encoder Device Tree Bindings + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +properties: + compatible: + const: chrontel,ch7033 + + reg: + maxItems: 1 + description: I2C address of the device + + ports: + type: object + + properties: + port@0: + type: object + description: | + Video port for RGB input. + + port@1: + type: object + description: | + DVI port, should be connected to a node compatible with the + dvi-connector binding. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + dvi-connector { + compatible = "dvi-connector"; + ddc-i2c-bus = <&twsi5>; + hpd-gpios = <&gpio 62 GPIO_ACTIVE_LOW>; + digital; + analog; + + port { + dvi_in: endpoint { + remote-endpoint = <&encoder_out>; + }; + }; + }; + + vga-dvi-encoder@76 { + compatible = "chrontel,ch7033"; + reg = <0x76>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&lcd0_rgb_out>; + }; + }; + + encoder_out: port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dvi_in>; + }; + }; + + }; + }; -- 2.24.1 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-03-09 8:13 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-03-07 19:07 [RESEND PATCH v2 0/3] Add support for Chrontel CH7033 VGA/DVI Encoder Lubomir Rintel 2020-03-07 19:07 ` Lubomir Rintel 2020-03-07 19:07 ` [RESEND PATCH v2 1/3] dt-bindings: Add vendor prefix for Chrontel, Inc Lubomir Rintel 2020-03-07 19:07 ` Lubomir Rintel 2020-03-07 19:07 ` Lubomir Rintel [this message] 2020-03-07 19:07 ` [RESEND PATCH v2 2/3] dt-bindings: display: Add Chrontel CH7033 Video Encoder binding Lubomir Rintel 2020-03-07 19:08 ` [RESEND PATCH v2 3/3] drm/bridge: chrontel-ch7033: Add a new driver Lubomir Rintel 2020-03-07 19:08 ` Lubomir Rintel
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200307190800.142658-3-lkundrak@v3.sk \ --to=lkundrak@v3.sk \ --cc=Laurent.pinchart@ideasonboard.com \ --cc=a.hajda@samsung.com \ --cc=airlied@linux.ie \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=jernej.skrabec@siol.net \ --cc=jonas@kwiboo.se \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=narmstrong@baylibre.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).