[PATCH AUTOSEL 5.4 24/28] drm/amdgpu: fix a GPU hang issue when remove device

[PATCH AUTOSEL 5.4 24/28] drm/amdgpu: fix a GPU hang issue when remove device

[Sasha Levin]

From: Dennis Li <Dennis.Li@amd.com>

[ Upstream commit 88e21af1b3f887d217f2fb14fc7e7d3cd87ebf57 ]

When GFXOFF is enabled and GPU is idle, driver will fail to access some
registers. Therefore change to disable power gating before all access
registers with MMIO.

Dmesg log is as following:
amdgpu 0000:03:00.0: amdgpu: amdgpu: finishing device.
amdgpu: cp queue pipe 4 queue 0 preemption failed
amdgpu 0000:03:00.0: amdgpu: failed to write reg 2890 wait reg 28a2
amdgpu 0000:03:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
amdgpu 0000:03:00.0: amdgpu: failed to write reg 2890 wait reg 28a2
amdgpu 0000:03:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706

Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index 29141bff4b572..3b3fc9a426e91 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -2057,11 +2057,11 @@ static int amdgpu_device_ip_fini(struct amdgpu_device *adev)
 	if (adev->gmc.xgmi.num_physical_nodes > 1)
 		amdgpu_xgmi_remove_device(adev);
 
-	amdgpu_amdkfd_device_fini(adev);
-
 	amdgpu_device_set_pg_state(adev, AMD_PG_STATE_UNGATE);
 	amdgpu_device_set_cg_state(adev, AMD_CG_STATE_UNGATE);
 
+	amdgpu_amdkfd_device_fini(adev);
+
 	/* need to disable SMC first */
 	for (i = 0; i < adev->num_ip_blocks; i++) {
 		if (!adev->ip_blocks[i].status.hw)
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 27/28] drm/msm: Call msm_init_vram before binding the gpu

[Sasha Levin]

From: Craig Tatlor <ctatlor97@gmail.com>

[ Upstream commit d863f0c7b536288e2bd40cbc01c10465dd226b11 ]

vram.size is needed when binding a gpu without an iommu and is defined
in msm_init_vram(), so run that before binding it.

Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_drv.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index 108632a1f2438..8d9d86c76a4e9 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -432,14 +432,14 @@ static int msm_drm_init(struct device *dev, struct drm_driver *drv)
 
 	drm_mode_config_init(ddev);
 
-	/* Bind all our sub-components: */
-	ret = component_bind_all(dev, ddev);
+	ret = msm_init_vram(ddev);
 	if (ret)
 		goto err_destroy_mdss;
 
-	ret = msm_init_vram(ddev);
+	/* Bind all our sub-components: */
+	ret = component_bind_all(dev, ddev);
 	if (ret)
-		goto err_msm_uninit;
+		goto err_destroy_mdss;
 
 	if (!dev->dma_parms) {
 		dev->dma_parms = devm_kzalloc(dev, sizeof(*dev->dma_parms),
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel