* [PATCH] drm/ingenic: Fix pixclock rate for 24-bit serial panels
@ 2021-03-23 14:40 Paul Cercueil
2021-04-12 14:34 ` Paul Cercueil
2021-05-13 12:29 ` Paul Cercueil
0 siblings, 2 replies; 8+ messages in thread
From: Paul Cercueil @ 2021-03-23 14:40 UTC (permalink / raw)
To: David Airlie, Daniel Vetter
Cc: linux-mips, dri-devel, linux-kernel, Paul Cercueil, od, stable,
Sam Ravnborg
When using a 24-bit panel on a 8-bit serial bus, the pixel clock
requested by the panel has to be multiplied by 3, since the subpixels
are shifted sequentially.
The code (in ingenic_drm_encoder_atomic_check) already computed
crtc_state->adjusted_mode->crtc_clock accordingly, but clk_set_rate()
used crtc_state->adjusted_mode->clock instead.
Fixes: 28ab7d35b6e0 ("drm/ingenic: Properly compute timings when using a 3x8-bit panel")
Cc: stable@vger.kernel.org # v5.10
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
index d60e1eefc9d1..cba68bf52ec5 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
+++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
@@ -342,7 +342,7 @@ static void ingenic_drm_crtc_atomic_flush(struct drm_crtc *crtc,
if (priv->update_clk_rate) {
mutex_lock(&priv->clk_mutex);
clk_set_rate(priv->pix_clk,
- crtc_state->adjusted_mode.clock * 1000);
+ crtc_state->adjusted_mode.crtc_clock * 1000);
priv->update_clk_rate = false;
mutex_unlock(&priv->clk_mutex);
}
--
2.30.2
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/ingenic: Fix pixclock rate for 24-bit serial panels
2021-03-23 14:40 [PATCH] drm/ingenic: Fix pixclock rate for 24-bit serial panels Paul Cercueil
@ 2021-04-12 14:34 ` Paul Cercueil
2021-04-12 14:53 ` H. Nikolaus Schaller
2021-05-13 12:29 ` Paul Cercueil
1 sibling, 1 reply; 8+ messages in thread
From: Paul Cercueil @ 2021-04-12 14:34 UTC (permalink / raw)
To: David Airlie, Daniel Vetter
Cc: linux-mips, stable, linux-kernel, od, dri-devel, Sam Ravnborg
Hi,
Can I have an ACK for this patch?
Then I can apply it to drm-misc-next-fixes.
Cheers,
-Paul
Le mar. 23 mars 2021 à 14:40, Paul Cercueil <paul@crapouillou.net> a
écrit :
> When using a 24-bit panel on a 8-bit serial bus, the pixel clock
> requested by the panel has to be multiplied by 3, since the subpixels
> are shifted sequentially.
>
> The code (in ingenic_drm_encoder_atomic_check) already computed
> crtc_state->adjusted_mode->crtc_clock accordingly, but clk_set_rate()
> used crtc_state->adjusted_mode->clock instead.
>
> Fixes: 28ab7d35b6e0 ("drm/ingenic: Properly compute timings when
> using a 3x8-bit panel")
> Cc: stable@vger.kernel.org # v5.10
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
> drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> index d60e1eefc9d1..cba68bf52ec5 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> @@ -342,7 +342,7 @@ static void ingenic_drm_crtc_atomic_flush(struct
> drm_crtc *crtc,
> if (priv->update_clk_rate) {
> mutex_lock(&priv->clk_mutex);
> clk_set_rate(priv->pix_clk,
> - crtc_state->adjusted_mode.clock * 1000);
> + crtc_state->adjusted_mode.crtc_clock * 1000);
> priv->update_clk_rate = false;
> mutex_unlock(&priv->clk_mutex);
> }
> --
> 2.30.2
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/ingenic: Fix pixclock rate for 24-bit serial panels
2021-04-12 14:34 ` Paul Cercueil
@ 2021-04-12 14:53 ` H. Nikolaus Schaller
0 siblings, 0 replies; 8+ messages in thread
From: H. Nikolaus Schaller @ 2021-04-12 14:53 UTC (permalink / raw)
To: Paul Cercueil
Cc: David Airlie, linux-mips, dri-devel, linux-kernel, od, stable,
Sam Ravnborg
> Am 12.04.2021 um 16:34 schrieb Paul Cercueil <paul@crapouillou.net>:
>
> Hi,
>
> Can I have an ACK for this patch?
>
> Then I can apply it to drm-misc-next-fixes.
>
> Cheers,
> -Paul
>
>
> Le mar. 23 mars 2021 à 14:40, Paul Cercueil <paul@crapouillou.net> a écrit :
>> When using a 24-bit panel on a 8-bit serial bus, the pixel clock
>> requested by the panel has to be multiplied by 3, since the subpixels
>> are shifted sequentially.
>> The code (in ingenic_drm_encoder_atomic_check) already computed
>> crtc_state->adjusted_mode->crtc_clock accordingly, but clk_set_rate()
>> used crtc_state->adjusted_mode->clock instead.
>> Fixes: 28ab7d35b6e0 ("drm/ingenic: Properly compute timings when using a 3x8-bit panel")
>> Cc: stable@vger.kernel.org # v5.10
Tested-by: H. Nikolaus Schaller <hns@goldelico.com> # CI20/jz4780 (HDMI) and Alpha400/jz4730 (LCD)
>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>> ---
>> drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> index d60e1eefc9d1..cba68bf52ec5 100644
>> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> @@ -342,7 +342,7 @@ static void ingenic_drm_crtc_atomic_flush(struct drm_crtc *crtc,
>> if (priv->update_clk_rate) {
>> mutex_lock(&priv->clk_mutex);
>> clk_set_rate(priv->pix_clk,
>> - crtc_state->adjusted_mode.clock * 1000);
>> + crtc_state->adjusted_mode.crtc_clock * 1000);
>> priv->update_clk_rate = false;
>> mutex_unlock(&priv->clk_mutex);
>> }
>> --
>> 2.30.2
>
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/ingenic: Fix pixclock rate for 24-bit serial panels
2021-03-23 14:40 [PATCH] drm/ingenic: Fix pixclock rate for 24-bit serial panels Paul Cercueil
2021-04-12 14:34 ` Paul Cercueil
@ 2021-05-13 12:29 ` Paul Cercueil
2021-05-14 17:26 ` Thomas Zimmermann
2021-05-17 13:15 ` Daniel Vetter
1 sibling, 2 replies; 8+ messages in thread
From: Paul Cercueil @ 2021-05-13 12:29 UTC (permalink / raw)
To: David Airlie, Daniel Vetter
Cc: linux-mips, stable, linux-kernel, od, dri-devel, Sam Ravnborg
Hi,
Almost two months later,
Le mar., mars 23 2021 at 14:40:08 +0000, Paul Cercueil
<paul@crapouillou.net> a écrit :
> When using a 24-bit panel on a 8-bit serial bus, the pixel clock
> requested by the panel has to be multiplied by 3, since the subpixels
> are shifted sequentially.
>
> The code (in ingenic_drm_encoder_atomic_check) already computed
> crtc_state->adjusted_mode->crtc_clock accordingly, but clk_set_rate()
> used crtc_state->adjusted_mode->clock instead.
>
> Fixes: 28ab7d35b6e0 ("drm/ingenic: Properly compute timings when
> using a 3x8-bit panel")
> Cc: stable@vger.kernel.org # v5.10
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Can I get an ACK for my patch?
Thanks!
-Paul
> ---
> drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> index d60e1eefc9d1..cba68bf52ec5 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> @@ -342,7 +342,7 @@ static void ingenic_drm_crtc_atomic_flush(struct
> drm_crtc *crtc,
> if (priv->update_clk_rate) {
> mutex_lock(&priv->clk_mutex);
> clk_set_rate(priv->pix_clk,
> - crtc_state->adjusted_mode.clock * 1000);
> + crtc_state->adjusted_mode.crtc_clock * 1000);
> priv->update_clk_rate = false;
> mutex_unlock(&priv->clk_mutex);
> }
> --
> 2.30.2
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/ingenic: Fix pixclock rate for 24-bit serial panels
2021-05-13 12:29 ` Paul Cercueil
@ 2021-05-14 17:26 ` Thomas Zimmermann
2021-05-17 13:15 ` Daniel Vetter
1 sibling, 0 replies; 8+ messages in thread
From: Thomas Zimmermann @ 2021-05-14 17:26 UTC (permalink / raw)
To: Paul Cercueil, David Airlie, Daniel Vetter
Cc: linux-mips, dri-devel, linux-kernel, od, stable, Sam Ravnborg
[-- Attachment #1.1: Type: text/plain, Size: 2009 bytes --]
Am 13.05.21 um 14:29 schrieb Paul Cercueil:
> Hi,
>
> Almost two months later,
>
>
> Le mar., mars 23 2021 at 14:40:08 +0000, Paul Cercueil
> <paul@crapouillou.net> a écrit :
>> When using a 24-bit panel on a 8-bit serial bus, the pixel clock
>> requested by the panel has to be multiplied by 3, since the subpixels
>> are shifted sequentially.
>>
>> The code (in ingenic_drm_encoder_atomic_check) already computed
>> crtc_state->adjusted_mode->crtc_clock accordingly, but clk_set_rate()
>> used crtc_state->adjusted_mode->clock instead.
>>
>> Fixes: 28ab7d35b6e0 ("drm/ingenic: Properly compute timings when using
>> a 3x8-bit panel")
>> Cc: stable@vger.kernel.org # v5.10
>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>
> Can I get an ACK for my patch?
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
>
> Thanks!
> -Paul
>
>> ---
>> drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> index d60e1eefc9d1..cba68bf52ec5 100644
>> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> @@ -342,7 +342,7 @@ static void ingenic_drm_crtc_atomic_flush(struct
>> drm_crtc *crtc,
>> if (priv->update_clk_rate) {
>> mutex_lock(&priv->clk_mutex);
>> clk_set_rate(priv->pix_clk,
>> - crtc_state->adjusted_mode.clock * 1000);
>> + crtc_state->adjusted_mode.crtc_clock * 1000);
>> priv->update_clk_rate
= false;
>> mutex_unlock(&priv->clk_mutex);
>> }
>> --
>> 2.30.2
>>
>
>
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 840 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/ingenic: Fix pixclock rate for 24-bit serial panels
2021-05-13 12:29 ` Paul Cercueil
2021-05-14 17:26 ` Thomas Zimmermann
@ 2021-05-17 13:15 ` Daniel Vetter
2021-05-17 14:30 ` Paul Cercueil
1 sibling, 1 reply; 8+ messages in thread
From: Daniel Vetter @ 2021-05-17 13:15 UTC (permalink / raw)
To: Paul Cercueil
Cc: David Airlie, linux-mips, dri-devel, linux-kernel, od, stable,
Sam Ravnborg
On Thu, May 13, 2021 at 01:29:30PM +0100, Paul Cercueil wrote:
> Hi,
>
> Almost two months later,
Since you're committer it's expected that you go actively out to look for
review or trade with someone else who has some patches that need a quick
look. It will not happen automatically, this is on you.
Also generally after 2 weeks the patch is lost and you need to ping it.
-Daniel
>
>
> Le mar., mars 23 2021 at 14:40:08 +0000, Paul Cercueil
> <paul@crapouillou.net> a écrit :
> > When using a 24-bit panel on a 8-bit serial bus, the pixel clock
> > requested by the panel has to be multiplied by 3, since the subpixels
> > are shifted sequentially.
> >
> > The code (in ingenic_drm_encoder_atomic_check) already computed
> > crtc_state->adjusted_mode->crtc_clock accordingly, but clk_set_rate()
> > used crtc_state->adjusted_mode->clock instead.
> >
> > Fixes: 28ab7d35b6e0 ("drm/ingenic: Properly compute timings when using a
> > 3x8-bit panel")
> > Cc: stable@vger.kernel.org # v5.10
> > Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>
> Can I get an ACK for my patch?
>
> Thanks!
> -Paul
>
> > ---
> > drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> > b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> > index d60e1eefc9d1..cba68bf52ec5 100644
> > --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> > +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> > @@ -342,7 +342,7 @@ static void ingenic_drm_crtc_atomic_flush(struct
> > drm_crtc *crtc,
> > if (priv->update_clk_rate) {
> > mutex_lock(&priv->clk_mutex);
> > clk_set_rate(priv->pix_clk,
> > - crtc_state->adjusted_mode.clock * 1000);
> > + crtc_state->adjusted_mode.crtc_clock * 1000);
> > priv->update_clk_rate = false;
> > mutex_unlock(&priv->clk_mutex);
> > }
> > --
> > 2.30.2
> >
>
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/ingenic: Fix pixclock rate for 24-bit serial panels
2021-05-17 13:15 ` Daniel Vetter
@ 2021-05-17 14:30 ` Paul Cercueil
2021-05-17 14:37 ` Daniel Vetter
0 siblings, 1 reply; 8+ messages in thread
From: Paul Cercueil @ 2021-05-17 14:30 UTC (permalink / raw)
To: Daniel Vetter
Cc: David Airlie, linux-mips, dri-devel, linux-kernel, od, stable,
Sam Ravnborg
Hi Daniel,
Le lun., mai 17 2021 at 15:15:59 +0200, Daniel Vetter <daniel@ffwll.ch>
a écrit :
> On Thu, May 13, 2021 at 01:29:30PM +0100, Paul Cercueil wrote:
>> Hi,
>>
>> Almost two months later,
>
> Since you're committer it's expected that you go actively out to look
> for
> review or trade with someone else who has some patches that need a
> quick
> look. It will not happen automatically, this is on you.
I maintain all drivers, platform code and DTS for Ingenic SoCs so I do
my part, just not in this subsystem.
> Also generally after 2 weeks the patch is lost and you need to ping
> it.
OK. Then I guess I'll just include this one in a future patchset.
> -Daniel
Cheers,
-Paul
>>
>>
>> Le mar., mars 23 2021 at 14:40:08 +0000, Paul Cercueil
>> <paul@crapouillou.net> a écrit :
>> > When using a 24-bit panel on a 8-bit serial bus, the pixel clock
>> > requested by the panel has to be multiplied by 3, since the
>> subpixels
>> > are shifted sequentially.
>> >
>> > The code (in ingenic_drm_encoder_atomic_check) already computed
>> > crtc_state->adjusted_mode->crtc_clock accordingly, but
>> clk_set_rate()
>> > used crtc_state->adjusted_mode->clock instead.
>> >
>> > Fixes: 28ab7d35b6e0 ("drm/ingenic: Properly compute timings when
>> using a
>> > 3x8-bit panel")
>> > Cc: stable@vger.kernel.org # v5.10
>> > Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>
>> Can I get an ACK for my patch?
>>
>> Thanks!
>> -Paul
>>
>> > ---
>> > drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 2 +-
>> > 1 file changed, 1 insertion(+), 1 deletion(-)
>> >
>> > diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> > b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> > index d60e1eefc9d1..cba68bf52ec5 100644
>> > --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> > +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> > @@ -342,7 +342,7 @@ static void
>> ingenic_drm_crtc_atomic_flush(struct
>> > drm_crtc *crtc,
>> > if (priv->update_clk_rate) {
>> > mutex_lock(&priv->clk_mutex);
>> > clk_set_rate(priv->pix_clk,
>> > - crtc_state->adjusted_mode.clock * 1000);
>> > + crtc_state->adjusted_mode.crtc_clock * 1000);
>> > priv->update_clk_rate = false;
>> > mutex_unlock(&priv->clk_mutex);
>> > }
>> > --
>> > 2.30.2
>> >
>>
>>
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/ingenic: Fix pixclock rate for 24-bit serial panels
2021-05-17 14:30 ` Paul Cercueil
@ 2021-05-17 14:37 ` Daniel Vetter
0 siblings, 0 replies; 8+ messages in thread
From: Daniel Vetter @ 2021-05-17 14:37 UTC (permalink / raw)
To: Paul Cercueil
Cc: David Airlie, linux-mips, dri-devel, linux-kernel, od, stable,
Sam Ravnborg
On Mon, May 17, 2021 at 03:30:45PM +0100, Paul Cercueil wrote:
> Hi Daniel,
>
> Le lun., mai 17 2021 at 15:15:59 +0200, Daniel Vetter <daniel@ffwll.ch> a
> écrit :
> > On Thu, May 13, 2021 at 01:29:30PM +0100, Paul Cercueil wrote:
> > > Hi,
> > >
> > > Almost two months later,
> >
> > Since you're committer it's expected that you go actively out to look
> > for
> > review or trade with someone else who has some patches that need a quick
> > look. It will not happen automatically, this is on you.
>
> I maintain all drivers, platform code and DTS for Ingenic SoCs so I do my
> part, just not in this subsystem.
>
> > Also generally after 2 weeks the patch is lost and you need to ping it.
>
> OK. Then I guess I'll just include this one in a future patchset.
Well you do have an ack now. I just meant to highlight that generally it
doesn't happen automatically, and also that after 2 weeks generally a
patchset wont get attention anymore.
-Daniel
>
> > -Daniel
>
> Cheers,
> -Paul
>
> > >
> > >
> > > Le mar., mars 23 2021 at 14:40:08 +0000, Paul Cercueil
> > > <paul@crapouillou.net> a écrit :
> > > > When using a 24-bit panel on a 8-bit serial bus, the pixel clock
> > > > requested by the panel has to be multiplied by 3, since the
> > > subpixels
> > > > are shifted sequentially.
> > > >
> > > > The code (in ingenic_drm_encoder_atomic_check) already computed
> > > > crtc_state->adjusted_mode->crtc_clock accordingly, but
> > > clk_set_rate()
> > > > used crtc_state->adjusted_mode->clock instead.
> > > >
> > > > Fixes: 28ab7d35b6e0 ("drm/ingenic: Properly compute timings when
> > > using a
> > > > 3x8-bit panel")
> > > > Cc: stable@vger.kernel.org # v5.10
> > > > Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> > >
> > > Can I get an ACK for my patch?
> > >
> > > Thanks!
> > > -Paul
> > >
> > > > ---
> > > > drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 2 +-
> > > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> > > > b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> > > > index d60e1eefc9d1..cba68bf52ec5 100644
> > > > --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> > > > +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> > > > @@ -342,7 +342,7 @@ static void
> > > ingenic_drm_crtc_atomic_flush(struct
> > > > drm_crtc *crtc,
> > > > if (priv->update_clk_rate) {
> > > > mutex_lock(&priv->clk_mutex);
> > > > clk_set_rate(priv->pix_clk,
> > > > - crtc_state->adjusted_mode.clock * 1000);
> > > > + crtc_state->adjusted_mode.crtc_clock * 1000);
> > > > priv->update_clk_rate = false;
> > > > mutex_unlock(&priv->clk_mutex);
> > > > }
> > > > --
> > > > 2.30.2
> > > >
> > >
> > >
> >
> > --
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > http://blog.ffwll.ch
>
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2021-05-17 14:37 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-23 14:40 [PATCH] drm/ingenic: Fix pixclock rate for 24-bit serial panels Paul Cercueil
2021-04-12 14:34 ` Paul Cercueil
2021-04-12 14:53 ` H. Nikolaus Schaller
2021-05-13 12:29 ` Paul Cercueil
2021-05-14 17:26 ` Thomas Zimmermann
2021-05-17 13:15 ` Daniel Vetter
2021-05-17 14:30 ` Paul Cercueil
2021-05-17 14:37 ` Daniel Vetter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).