[PATCH v3 01/13] drm/modes: parse_cmdline: Fix possible reference past end of string

[PATCH v3 01/13] drm/modes: parse_cmdline: Fix possible reference past end of string

[Hans de Goede]

Before this commit, if the last option of a video=... option is for
example "rotate" without a "=<value>" after it then delim will point to
the terminating 0 of the string, and value which is sets to <delim + 1>
will point one position past the end of the string.

This commit fixes this by enforcing that the contents of delim equals '='
as it should be for options which take a value, this check is done in a
new drm_mode_parse_cmdline_int helper function which factors out the
common integer parsing code for all the options which take an int.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/gpu/drm/drm_modes.c | 68 ++++++++++++++++---------------------
 1 file changed, 30 insertions(+), 38 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 88232698d7a0..3c3c7435225f 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -1568,11 +1568,34 @@ static int drm_mode_parse_cmdline_res_mode(const char *str, unsigned int length,
 	return 0;
 }
 
+static int drm_mode_parse_cmdline_int(const char *delim, unsigned int *int_ret)
+{
+	const char *value;
+	char *endp;
+
+	/*
+	 * delim must point to the '=', otherwise it is a syntax error and
+	 * if delim points to the terminating zero, then delim + 1 wil point
+	 * past the end of the string.
+	 */
+	if (*delim != '=')
+		return -EINVAL;
+
+	value = delim + 1;
+	*int_ret = simple_strtol(value, &endp, 10);
+
+	/* Make sure we have parsed something */
+	if (endp == value)
+		return -EINVAL;
+
+	return 0;
+}
+
 static int drm_mode_parse_cmdline_options(char *str, size_t len,
 					  const struct drm_connector *connector,
 					  struct drm_cmdline_mode *mode)
 {
-	unsigned int rotation = 0;
+	unsigned int deg, margin, rotation = 0;
 	char *sep = str;
 
 	while ((sep = strchr(sep, ','))) {
@@ -1588,13 +1611,7 @@ static int drm_mode_parse_cmdline_options(char *str, size_t len,
 		}
 
 		if (!strncmp(option, "rotate", delim - option)) {
-			const char *value = delim + 1;
-			unsigned int deg;
-
-			deg = simple_strtol(value, &sep, 10);
-
-			/* Make sure we have parsed something */
-			if (sep == value)
+			if (drm_mode_parse_cmdline_int(delim, &deg))
 				return -EINVAL;
 
 			switch (deg) {
@@ -1619,57 +1636,32 @@ static int drm_mode_parse_cmdline_options(char *str, size_t len,
 			}
 		} else if (!strncmp(option, "reflect_x", delim - option)) {
 			rotation |= DRM_MODE_REFLECT_X;
-			sep = delim;
 		} else if (!strncmp(option, "reflect_y", delim - option)) {
 			rotation |= DRM_MODE_REFLECT_Y;
-			sep = delim;
 		} else if (!strncmp(option, "margin_right", delim - option)) {
-			const char *value = delim + 1;
-			unsigned int margin;
-
-			margin = simple_strtol(value, &sep, 10);
-
-			/* Make sure we have parsed something */
-			if (sep == value)
+			if (drm_mode_parse_cmdline_int(delim, &margin))
 				return -EINVAL;
 
 			mode->tv_margins.right = margin;
 		} else if (!strncmp(option, "margin_left", delim - option)) {
-			const char *value = delim + 1;
-			unsigned int margin;
-
-			margin = simple_strtol(value, &sep, 10);
-
-			/* Make sure we have parsed something */
-			if (sep == value)
+			if (drm_mode_parse_cmdline_int(delim, &margin))
 				return -EINVAL;
 
 			mode->tv_margins.left = margin;
 		} else if (!strncmp(option, "margin_top", delim - option)) {
-			const char *value = delim + 1;
-			unsigned int margin;
-
-			margin = simple_strtol(value, &sep, 10);
-
-			/* Make sure we have parsed something */
-			if (sep == value)
+			if (drm_mode_parse_cmdline_int(delim, &margin))
 				return -EINVAL;
 
 			mode->tv_margins.top = margin;
 		} else if (!strncmp(option, "margin_bottom", delim - option)) {
-			const char *value = delim + 1;
-			unsigned int margin;
-
-			margin = simple_strtol(value, &sep, 10);
-
-			/* Make sure we have parsed something */
-			if (sep == value)
+			if (drm_mode_parse_cmdline_int(delim, &margin))
 				return -EINVAL;
 
 			mode->tv_margins.bottom = margin;
 		} else {
 			return -EINVAL;
 		}
+		sep = delim;
 	}
 
 	mode->rotation_reflection = rotation;
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 02/13] drm/modes: parse_cmdline: Make various char pointers const

[Hans de Goede]

We are not supposed to modify the passed in string, make char pointers
used in drm_mode_parse_cmdline_options() const char * where possible.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/gpu/drm/drm_modes.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 3c3c7435225f..654d4b6fecb3 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -1591,15 +1591,15 @@ static int drm_mode_parse_cmdline_int(const char *delim, unsigned int *int_ret)
 	return 0;
 }
 
-static int drm_mode_parse_cmdline_options(char *str, size_t len,
+static int drm_mode_parse_cmdline_options(const char *str, size_t len,
 					  const struct drm_connector *connector,
 					  struct drm_cmdline_mode *mode)
 {
 	unsigned int deg, margin, rotation = 0;
-	char *sep = str;
+	const char *sep = str;
 
 	while ((sep = strchr(sep, ','))) {
-		char *delim, *option;
+		const char *delim, *option;
 
 		option = sep + 1;
 		delim = strchr(option, '=');
@@ -1718,8 +1718,8 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 	bool named_mode = false, parse_extras = false;
 	unsigned int bpp_off = 0, refresh_off = 0, options_off = 0;
 	unsigned int mode_end = 0;
-	char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
-	char *options_ptr = NULL;
+	const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
+	const char *options_ptr = NULL;
 	char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
 	int ret;
 
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 03/13] drm/modes: parse_cmdline: Stop parsing extras after bpp / refresh at ', '

[Hans de Goede]

Before this commit it was impossible to add an extra mode argument after
a bpp or refresh specifier, combined with an option, e.g.
video=HDMI-1:720x480-24e,rotate=180 would not work, either the "e" to
force enable would need to be dropped or the ",rotate=180", otherwise
the mode_option would not be accepted.

This commit fixes this by fixing the length calculation if extras_ptr
is set to stop the extra parsing at the start of the options (stop at the
',' options_ptr points to).

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/gpu/drm/drm_modes.c                   | 10 ++++---
 .../gpu/drm/selftests/drm_cmdline_selftests.h |  1 +
 .../drm/selftests/test-drm_cmdline_parser.c   | 26 +++++++++++++++++++
 3 files changed, 33 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 654d4b6fecb3..a8aa7955fd45 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -1721,7 +1721,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 	const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
 	const char *options_ptr = NULL;
 	char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
-	int ret;
+	int i, len, ret;
 
 #ifdef CONFIG_FB
 	if (!mode_option)
@@ -1841,9 +1841,11 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 	else if (refresh_ptr)
 		extra_ptr = refresh_end_ptr;
 
-	if (extra_ptr &&
-	    extra_ptr != options_ptr) {
-		int len = strlen(name) - (extra_ptr - name);
+	if (extra_ptr) {
+		if (options_ptr)
+			len = options_ptr - extra_ptr;
+		else
+			len = strlen(extra_ptr);
 
 		ret = drm_mode_parse_cmdline_extra(extra_ptr, len, false,
 						   connector, mode);
diff --git a/drivers/gpu/drm/selftests/drm_cmdline_selftests.h b/drivers/gpu/drm/selftests/drm_cmdline_selftests.h
index 6d61a0eb5d64..ca1fc7a78953 100644
--- a/drivers/gpu/drm/selftests/drm_cmdline_selftests.h
+++ b/drivers/gpu/drm/selftests/drm_cmdline_selftests.h
@@ -60,3 +60,4 @@ cmdline_test(drm_cmdline_test_vmirror)
 cmdline_test(drm_cmdline_test_margin_options)
 cmdline_test(drm_cmdline_test_multiple_options)
 cmdline_test(drm_cmdline_test_invalid_option)
+cmdline_test(drm_cmdline_test_bpp_extra_and_option)
diff --git a/drivers/gpu/drm/selftests/test-drm_cmdline_parser.c b/drivers/gpu/drm/selftests/test-drm_cmdline_parser.c
index 013de9d27c35..5b8dea922257 100644
--- a/drivers/gpu/drm/selftests/test-drm_cmdline_parser.c
+++ b/drivers/gpu/drm/selftests/test-drm_cmdline_parser.c
@@ -992,6 +992,32 @@ static int drm_cmdline_test_invalid_option(void *ignored)
 	return 0;
 }
 
+static int drm_cmdline_test_bpp_extra_and_option(void *ignored)
+{
+	struct drm_cmdline_mode mode = { };
+
+	FAIL_ON(!drm_mode_parse_command_line_for_connector("720x480-24e,rotate=180",
+							   &no_connector,
+							   &mode));
+	FAIL_ON(!mode.specified);
+	FAIL_ON(mode.xres != 720);
+	FAIL_ON(mode.yres != 480);
+	FAIL_ON(mode.rotation_reflection != DRM_MODE_ROTATE_180);
+
+	FAIL_ON(mode.refresh_specified);
+
+	FAIL_ON(!mode.bpp_specified);
+	FAIL_ON(mode.bpp != 24);
+
+	FAIL_ON(mode.rb);
+	FAIL_ON(mode.cvt);
+	FAIL_ON(mode.interlace);
+	FAIL_ON(mode.margins);
+	FAIL_ON(mode.force != DRM_FORCE_ON);
+
+	return 0;
+}
+
 #include "drm_selftest.c"
 
 static int __init test_drm_cmdline_init(void)
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 04/13] drm/modes: parse_cmdline: Accept extras directly after mode combined with options

[Hans de Goede]

Before this commit it was impossible to combine an extra mode argument
specified directly after the resolution with an option, e.g.
video=HDMI-1:720x480e,rotate=180 would not work, either the "e" to force
enable would need to be dropped or the ",rotate=180", otherwise the
mode_option would not be accepted.

This commit fixes this by setting parse_extras to true in this case, so
that drm_mode_parse_cmdline_res_mode() parses the extra arguments directly
after the resolution.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/gpu/drm/drm_modes.c                   |  1 +
 .../gpu/drm/selftests/drm_cmdline_selftests.h |  1 +
 .../drm/selftests/test-drm_cmdline_parser.c   | 24 +++++++++++++++++++
 3 files changed, 26 insertions(+)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index a8aa7955fd45..f49401124727 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -1794,6 +1794,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 		mode_end = refresh_off;
 	} else if (options_ptr) {
 		mode_end = options_off;
+		parse_extras = true;
 	} else {
 		mode_end = strlen(name);
 		parse_extras = true;
diff --git a/drivers/gpu/drm/selftests/drm_cmdline_selftests.h b/drivers/gpu/drm/selftests/drm_cmdline_selftests.h
index ca1fc7a78953..003e2c3ffc39 100644
--- a/drivers/gpu/drm/selftests/drm_cmdline_selftests.h
+++ b/drivers/gpu/drm/selftests/drm_cmdline_selftests.h
@@ -61,3 +61,4 @@ cmdline_test(drm_cmdline_test_margin_options)
 cmdline_test(drm_cmdline_test_multiple_options)
 cmdline_test(drm_cmdline_test_invalid_option)
 cmdline_test(drm_cmdline_test_bpp_extra_and_option)
+cmdline_test(drm_cmdline_test_extra_and_option)
diff --git a/drivers/gpu/drm/selftests/test-drm_cmdline_parser.c b/drivers/gpu/drm/selftests/test-drm_cmdline_parser.c
index 5b8dea922257..bc4db017e993 100644
--- a/drivers/gpu/drm/selftests/test-drm_cmdline_parser.c
+++ b/drivers/gpu/drm/selftests/test-drm_cmdline_parser.c
@@ -1018,6 +1018,30 @@ static int drm_cmdline_test_bpp_extra_and_option(void *ignored)
 	return 0;
 }
 
+static int drm_cmdline_test_extra_and_option(void *ignored)
+{
+	struct drm_cmdline_mode mode = { };
+
+	FAIL_ON(!drm_mode_parse_command_line_for_connector("720x480e,rotate=180",
+							   &no_connector,
+							   &mode));
+	FAIL_ON(!mode.specified);
+	FAIL_ON(mode.xres != 720);
+	FAIL_ON(mode.yres != 480);
+	FAIL_ON(mode.rotation_reflection != DRM_MODE_ROTATE_180);
+
+	FAIL_ON(mode.refresh_specified);
+	FAIL_ON(mode.bpp_specified);
+
+	FAIL_ON(mode.rb);
+	FAIL_ON(mode.cvt);
+	FAIL_ON(mode.interlace);
+	FAIL_ON(mode.margins);
+	FAIL_ON(mode.force != DRM_FORCE_ON);
+
+	return 0;
+}
+
 #include "drm_selftest.c"
 
 static int __init test_drm_cmdline_init(void)
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 05/13] drm/modes: parse_cmdline: Rework drm_mode_parse_cmdline_options()

[Hans de Goede]

Refactor drm_mode_parse_cmdline_options() so that it takes a pointer
to the first option, rather then a pointer to the ',' before the first
option.

This is a preparation patch for allowing parsing of stand-alone options
without a mode before them, e.g.: video=HDMI-1:margin_right=14,...

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/gpu/drm/drm_modes.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index f49401124727..25e8edf4cfb8 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -1591,23 +1591,21 @@ static int drm_mode_parse_cmdline_int(const char *delim, unsigned int *int_ret)
 	return 0;
 }
 
-static int drm_mode_parse_cmdline_options(const char *str, size_t len,
+static int drm_mode_parse_cmdline_options(const char *str,
 					  const struct drm_connector *connector,
 					  struct drm_cmdline_mode *mode)
 {
 	unsigned int deg, margin, rotation = 0;
-	const char *sep = str;
+	const char *delim, *option, *sep;
 
-	while ((sep = strchr(sep, ','))) {
-		const char *delim, *option;
-
-		option = sep + 1;
+	option = str;
+	do {
 		delim = strchr(option, '=');
 		if (!delim) {
 			delim = strchr(option, ',');
 
 			if (!delim)
-				delim = str + len;
+				delim = option + strlen(option);
 		}
 
 		if (!strncmp(option, "rotate", delim - option)) {
@@ -1661,8 +1659,9 @@ static int drm_mode_parse_cmdline_options(const char *str, size_t len,
 		} else {
 			return -EINVAL;
 		}
-		sep = delim;
-	}
+		sep = strchr(delim, ',');
+		option = sep + 1;
+	} while (sep);
 
 	mode->rotation_reflection = rotation;
 
@@ -1855,9 +1854,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 	}
 
 	if (options_ptr) {
-		int len = strlen(name) - (options_ptr - name);
-
-		ret = drm_mode_parse_cmdline_options(options_ptr, len,
+		ret = drm_mode_parse_cmdline_options(options_ptr + 1,
 						     connector, mode);
 		if (ret)
 			return false;
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 06/13] drm/modes: parse_cmdline: Add freestanding argument to drm_mode_parse_cmdline_options()

[Hans de Goede]

Add a freestanding function argument to drm_mode_parse_cmdline_options()
similar to how drm_mode_parse_cmdline_extra() already has this.

This is a preparation patch for allowing parsing of stand-alone options
without a mode before them, e.g.: video=HDMI-1:margin_right=14,...

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/gpu/drm/drm_modes.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 25e8edf4cfb8..80cb247c83c7 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -1592,6 +1592,7 @@ static int drm_mode_parse_cmdline_int(const char *delim, unsigned int *int_ret)
 }
 
 static int drm_mode_parse_cmdline_options(const char *str,
+					  bool freestanding,
 					  const struct drm_connector *connector,
 					  struct drm_cmdline_mode *mode)
 {
@@ -1663,6 +1664,9 @@ static int drm_mode_parse_cmdline_options(const char *str,
 		option = sep + 1;
 	} while (sep);
 
+	if (rotation && freestanding)
+		return -EINVAL;
+
 	mode->rotation_reflection = rotation;
 
 	return 0;
@@ -1855,6 +1859,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 
 	if (options_ptr) {
 		ret = drm_mode_parse_cmdline_options(options_ptr + 1,
+						     false,
 						     connector, mode);
 		if (ret)
 			return false;
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 07/13] drm/modes: parse_cmdline: Set bpp/refresh_specified after successful parsing

[Hans de Goede]

drm_connector_get_cmdline_mode() calls
drm_mode_parse_command_line_for_connector() with &connector->cmdline_mode
as mode argument, so anything which we store in the mode arguments gets
kept even if we return false.

Avoid storing a possibly false-postive bpp/refresh_specified setting
in connector->cmdline_mode by moving the setting of these to after
successful parsing of the bpp/refresh parts of the video= argument.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/gpu/drm/drm_modes.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 80cb247c83c7..72828fa9fc91 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -1771,10 +1771,8 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 
 	/* Try to locate the bpp and refresh specifiers, if any */
 	bpp_ptr = strchr(name, '-');
-	if (bpp_ptr) {
+	if (bpp_ptr)
 		bpp_off = bpp_ptr - name;
-		mode->bpp_specified = true;
-	}
 
 	refresh_ptr = strchr(name, '@');
 	if (refresh_ptr) {
@@ -1782,7 +1780,6 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 			return false;
 
 		refresh_off = refresh_ptr - name;
-		mode->refresh_specified = true;
 	}
 
 	/* Locate the start of named options */
@@ -1825,6 +1822,8 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 		ret = drm_mode_parse_cmdline_bpp(bpp_ptr, &bpp_end_ptr, mode);
 		if (ret)
 			return false;
+
+		mode->bpp_specified = true;
 	}
 
 	if (refresh_ptr) {
@@ -1832,6 +1831,8 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 						     &refresh_end_ptr, mode);
 		if (ret)
 			return false;
+
+		mode->refresh_specified = true;
 	}
 
 	/*
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 08/13] drm/modes: parse_cmdline: Allow specifying stand-alone options

[Hans de Goede]

Some options which can be specified on the commandline, such as
margin_right=..., margin_left=..., etc. are applied not only to the
specified mode, but to all modes. As such it would be nice if the user
can simply say e.g.
video=HDMI-1:margin_right=14,margin_left=24,margin_bottom=36,margin_top=42

This commit refactors drm_mode_parse_command_line_for_connector() to
add support for this, and as a nice side effect also cleans up the
function a bit.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/gpu/drm/drm_modes.c                   | 92 +++++++------------
 .../gpu/drm/selftests/drm_cmdline_selftests.h |  2 +
 .../drm/selftests/test-drm_cmdline_parser.c   | 50 ++++++++++
 3 files changed, 86 insertions(+), 58 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 72828fa9fc91..2e82603f5d0a 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -1677,17 +1677,6 @@ static const char * const drm_named_modes_whitelist[] = {
 	"PAL",
 };
 
-static bool drm_named_mode_is_in_whitelist(const char *mode, unsigned int size)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++)
-		if (!strncmp(mode, drm_named_modes_whitelist[i], size))
-			return true;
-
-	return false;
-}
-
 /**
  * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
  * @mode_option: optional per connector mode option
@@ -1718,7 +1707,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 					       struct drm_cmdline_mode *mode)
 {
 	const char *name;
-	bool named_mode = false, parse_extras = false;
+	bool freestanding = false, parse_extras = false;
 	unsigned int bpp_off = 0, refresh_off = 0, options_off = 0;
 	unsigned int mode_end = 0;
 	const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
@@ -1738,49 +1727,14 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 
 	name = mode_option;
 
-	/*
-	 * This is a bit convoluted. To differentiate between the
-	 * named modes and poorly formatted resolutions, we need a
-	 * bunch of things:
-	 *   - We need to make sure that the first character (which
-	 *     would be our resolution in X) is a digit.
-	 *   - If not, then it's either a named mode or a force on/off.
-	 *     To distinguish between the two, we need to run the
-	 *     extra parsing function, and if not, then we consider it
-	 *     a named mode.
-	 *
-	 * If this isn't enough, we should add more heuristics here,
-	 * and matching unit-tests.
-	 */
-	if (!isdigit(name[0]) && name[0] != 'x') {
-		unsigned int namelen = strlen(name);
-
-		/*
-		 * Only the force on/off options can be in that case,
-		 * and they all take a single character.
-		 */
-		if (namelen == 1) {
-			ret = drm_mode_parse_cmdline_extra(name, namelen, true,
-							   connector, mode);
-			if (!ret)
-				return true;
-		}
-
-		named_mode = true;
-	}
-
 	/* Try to locate the bpp and refresh specifiers, if any */
 	bpp_ptr = strchr(name, '-');
 	if (bpp_ptr)
 		bpp_off = bpp_ptr - name;
 
 	refresh_ptr = strchr(name, '@');
-	if (refresh_ptr) {
-		if (named_mode)
-			return false;
-
+	if (refresh_ptr)
 		refresh_off = refresh_ptr - name;
-	}
 
 	/* Locate the start of named options */
 	options_ptr = strchr(name, ',');
@@ -1800,23 +1754,45 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 		parse_extras = true;
 	}
 
-	if (named_mode) {
-		if (mode_end + 1 > DRM_DISPLAY_MODE_LEN)
-			return false;
+	/* First check for a named mode */
+	for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
+		ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
+		if (ret == mode_end) {
+			if (refresh_ptr)
+				return false; /* named + refresh is invalid */
 
-		if (!drm_named_mode_is_in_whitelist(name, mode_end))
-			return false;
+			strcpy(mode->name, drm_named_modes_whitelist[i]);
+			mode->specified = true;
+			break;
+		}
+	}
 
-		strscpy(mode->name, name, mode_end + 1);
-	} else {
+	/* No named mode? Check for a normal mode argument, e.g. 1024x768 */
+	if (!mode->specified && isdigit(name[0])) {
 		ret = drm_mode_parse_cmdline_res_mode(name, mode_end,
 						      parse_extras,
 						      connector,
 						      mode);
 		if (ret)
 			return false;
+
+		mode->specified = true;
+	}
+
+	/* No mode? Check for freestanding extras and/or options */
+	if (!mode->specified) {
+		unsigned int len = strlen(mode_option);
+
+		if (bpp_ptr || refresh_ptr)
+			return false; /* syntax error */
+
+		if (len == 1 || (len >= 2 && mode_option[1] == ','))
+			extra_ptr = mode_option;
+		else
+			options_ptr = mode_option - 1;
+
+		freestanding = true;
 	}
-	mode->specified = true;
 
 	if (bpp_ptr) {
 		ret = drm_mode_parse_cmdline_bpp(bpp_ptr, &bpp_end_ptr, mode);
@@ -1852,7 +1828,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 		else
 			len = strlen(extra_ptr);
 
-		ret = drm_mode_parse_cmdline_extra(extra_ptr, len, false,
+		ret = drm_mode_parse_cmdline_extra(extra_ptr, len, freestanding,
 						   connector, mode);
 		if (ret)
 			return false;
@@ -1860,7 +1836,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 
 	if (options_ptr) {
 		ret = drm_mode_parse_cmdline_options(options_ptr + 1,
-						     false,
+						     freestanding,
 						     connector, mode);
 		if (ret)
 			return false;
diff --git a/drivers/gpu/drm/selftests/drm_cmdline_selftests.h b/drivers/gpu/drm/selftests/drm_cmdline_selftests.h
index 003e2c3ffc39..aee92ac2cc21 100644
--- a/drivers/gpu/drm/selftests/drm_cmdline_selftests.h
+++ b/drivers/gpu/drm/selftests/drm_cmdline_selftests.h
@@ -62,3 +62,5 @@ cmdline_test(drm_cmdline_test_multiple_options)
 cmdline_test(drm_cmdline_test_invalid_option)
 cmdline_test(drm_cmdline_test_bpp_extra_and_option)
 cmdline_test(drm_cmdline_test_extra_and_option)
+cmdline_test(drm_cmdline_test_freestanding_options)
+cmdline_test(drm_cmdline_test_freestanding_force_e_and_options)
diff --git a/drivers/gpu/drm/selftests/test-drm_cmdline_parser.c b/drivers/gpu/drm/selftests/test-drm_cmdline_parser.c
index bc4db017e993..8248d4aa5aaa 100644
--- a/drivers/gpu/drm/selftests/test-drm_cmdline_parser.c
+++ b/drivers/gpu/drm/selftests/test-drm_cmdline_parser.c
@@ -1042,6 +1042,56 @@ static int drm_cmdline_test_extra_and_option(void *ignored)
 	return 0;
 }
 
+static int drm_cmdline_test_freestanding_options(void *ignored)
+{
+	struct drm_cmdline_mode mode = { };
+
+	FAIL_ON(!drm_mode_parse_command_line_for_connector("margin_right=14,margin_left=24,margin_bottom=36,margin_top=42",
+							   &no_connector,
+							   &mode));
+	FAIL_ON(mode.specified);
+	FAIL_ON(mode.refresh_specified);
+	FAIL_ON(mode.bpp_specified);
+
+	FAIL_ON(mode.tv_margins.right != 14);
+	FAIL_ON(mode.tv_margins.left != 24);
+	FAIL_ON(mode.tv_margins.bottom != 36);
+	FAIL_ON(mode.tv_margins.top != 42);
+
+	FAIL_ON(mode.rb);
+	FAIL_ON(mode.cvt);
+	FAIL_ON(mode.interlace);
+	FAIL_ON(mode.margins);
+	FAIL_ON(mode.force != DRM_FORCE_UNSPECIFIED);
+
+	return 0;
+}
+
+static int drm_cmdline_test_freestanding_force_e_and_options(void *ignored)
+{
+	struct drm_cmdline_mode mode = { };
+
+	FAIL_ON(!drm_mode_parse_command_line_for_connector("e,margin_right=14,margin_left=24,margin_bottom=36,margin_top=42",
+							   &no_connector,
+							   &mode));
+	FAIL_ON(mode.specified);
+	FAIL_ON(mode.refresh_specified);
+	FAIL_ON(mode.bpp_specified);
+
+	FAIL_ON(mode.tv_margins.right != 14);
+	FAIL_ON(mode.tv_margins.left != 24);
+	FAIL_ON(mode.tv_margins.bottom != 36);
+	FAIL_ON(mode.tv_margins.top != 42);
+
+	FAIL_ON(mode.rb);
+	FAIL_ON(mode.cvt);
+	FAIL_ON(mode.interlace);
+	FAIL_ON(mode.margins);
+	FAIL_ON(mode.force != DRM_FORCE_ON);
+
+	return 0;
+}
+
 #include "drm_selftest.c"
 
 static int __init test_drm_cmdline_init(void)
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 09/13] drm/modes: parse_cmdline: Add support for specifying panel_orientation (v2)

[Hans de Goede]

Sometimes we want to override a connector's panel_orientation from the
kernel commandline. Either for testing and for special cases, e.g. a kiosk
like setup which uses a TV mounted in portrait mode.

Users can already specify a "rotate" option through a video= kernel cmdline
option. But that only supports 0/180 degrees (see drm_client_modeset TODO)
and only works for in kernel modeset clients, not for userspace kms users.

The "panel-orientation" connector property OTOH does support 90/270 degrees
as it leaves dealing with the rotation up to userspace and this does work
for userspace kms clients (at least those which support this property).

Changes in v2:
-Add missing ':' after @panel_orientation (reported by kbuild test robot)

BugLink: https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/83
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 Documentation/fb/modedb.rst                   |  3 ++
 drivers/gpu/drm/drm_modes.c                   | 32 +++++++++++++++++++
 .../gpu/drm/selftests/drm_cmdline_selftests.h |  1 +
 .../drm/selftests/test-drm_cmdline_parser.c   | 22 +++++++++++++
 include/drm/drm_connector.h                   |  8 +++++
 5 files changed, 66 insertions(+)

diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
index 9c4e3fd39e6d..624d08fd2856 100644
--- a/Documentation/fb/modedb.rst
+++ b/Documentation/fb/modedb.rst
@@ -65,6 +65,9 @@ Valid options are::
   - reflect_y (boolean): Perform an axial symmetry on the Y axis
   - rotate (integer): Rotate the initial framebuffer by x
     degrees. Valid values are 0, 90, 180 and 270.
+  - panel_orientation, one of "normal", "upside_down", "left_side_up", or
+    "right_side_up". For KMS drivers only, this sets the "panel orientation"
+    property on the kms connector as hint for kms users.
 
 
 -----------------------------------------------------------------------------
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 2e82603f5d0a..119fed7ab815 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -1591,6 +1591,33 @@ static int drm_mode_parse_cmdline_int(const char *delim, unsigned int *int_ret)
 	return 0;
 }
 
+static int drm_mode_parse_panel_orientation(const char *delim,
+					    struct drm_cmdline_mode *mode)
+{
+	const char *value;
+
+	if (*delim != '=')
+		return -EINVAL;
+
+	value = delim + 1;
+	delim = strchr(value, ',');
+	if (!delim)
+		delim = value + strlen(value);
+
+	if (!strncmp(value, "normal", delim - value))
+		mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
+	else if (!strncmp(value, "upside_down", delim - value))
+		mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
+	else if (!strncmp(value, "left_side_up", delim - value))
+		mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP;
+	else if (!strncmp(value, "right_side_up", delim - value))
+		mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
 static int drm_mode_parse_cmdline_options(const char *str,
 					  bool freestanding,
 					  const struct drm_connector *connector,
@@ -1657,6 +1684,9 @@ static int drm_mode_parse_cmdline_options(const char *str,
 				return -EINVAL;
 
 			mode->tv_margins.bottom = margin;
+		} else if (!strncmp(option, "panel_orientation", delim - option)) {
+			if (drm_mode_parse_panel_orientation(delim, mode))
+				return -EINVAL;
 		} else {
 			return -EINVAL;
 		}
@@ -1715,6 +1745,8 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 	char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
 	int i, len, ret;
 
+	mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+
 #ifdef CONFIG_FB
 	if (!mode_option)
 		mode_option = fb_mode_option;
diff --git a/drivers/gpu/drm/selftests/drm_cmdline_selftests.h b/drivers/gpu/drm/selftests/drm_cmdline_selftests.h
index aee92ac2cc21..ceac7af9a172 100644
--- a/drivers/gpu/drm/selftests/drm_cmdline_selftests.h
+++ b/drivers/gpu/drm/selftests/drm_cmdline_selftests.h
@@ -64,3 +64,4 @@ cmdline_test(drm_cmdline_test_bpp_extra_and_option)
 cmdline_test(drm_cmdline_test_extra_and_option)
 cmdline_test(drm_cmdline_test_freestanding_options)
 cmdline_test(drm_cmdline_test_freestanding_force_e_and_options)
+cmdline_test(drm_cmdline_test_panel_orientation)
diff --git a/drivers/gpu/drm/selftests/test-drm_cmdline_parser.c b/drivers/gpu/drm/selftests/test-drm_cmdline_parser.c
index 8248d4aa5aaa..520f3e66a384 100644
--- a/drivers/gpu/drm/selftests/test-drm_cmdline_parser.c
+++ b/drivers/gpu/drm/selftests/test-drm_cmdline_parser.c
@@ -1092,6 +1092,28 @@ static int drm_cmdline_test_freestanding_force_e_and_options(void *ignored)
 	return 0;
 }
 
+static int drm_cmdline_test_panel_orientation(void *ignored)
+{
+	struct drm_cmdline_mode mode = { };
+
+	FAIL_ON(!drm_mode_parse_command_line_for_connector("panel_orientation=upside_down",
+							   &no_connector,
+							   &mode));
+	FAIL_ON(mode.specified);
+	FAIL_ON(mode.refresh_specified);
+	FAIL_ON(mode.bpp_specified);
+
+	FAIL_ON(mode.panel_orientation != DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP);
+
+	FAIL_ON(mode.rb);
+	FAIL_ON(mode.cvt);
+	FAIL_ON(mode.interlace);
+	FAIL_ON(mode.margins);
+	FAIL_ON(mode.force != DRM_FORCE_UNSPECIFIED);
+
+	return 0;
+}
+
 #include "drm_selftest.c"
 
 static int __init test_drm_cmdline_init(void)
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 681cb590f952..3fbcf7d3fcaf 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1065,6 +1065,14 @@ struct drm_cmdline_mode {
 	 */
 	unsigned int rotation_reflection;
 
+	/**
+	 * @panel_orientation:
+	 *
+	 * drm-connector "panel orientation" property override value,
+	 * DRM_MODE_PANEL_ORIENTATION_UNKNOWN if not set.
+	 */
+	enum drm_panel_orientation panel_orientation;
+
 	/**
 	 * @tv_margins: TV margins to apply to the mode.
 	 */
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 10/13] drm/modes: parse_cmdline: Remove some unnecessary code (v2)

[Hans de Goede]

fb_get_options() will return fb_mode_option if no video=<connector-name>
argument is present on the kernel commandline, so there is no need to also
do this in drm_mode_parse_command_line_for_connector() as our only caller
uses fb_get_options() to get the mode_option argument.

Changes in v2:
-Split out the changes dealing with the initialization of the mode struct
 into a separate patch

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/gpu/drm/drm_modes.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 119fed7ab815..beb764efe6b3 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -1747,11 +1747,6 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 
 	mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
 
-#ifdef CONFIG_FB
-	if (!mode_option)
-		mode_option = fb_mode_option;
-#endif
-
 	if (!mode_option) {
 		mode->specified = false;
 		return false;
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 11/13] drm/modes: parse_cmdline: Explicitly memset the passed in drm_cmdline_mode struct

[Hans de Goede]

Instead of only setting mode->specified on false on an early exit and
leaving e.g. mode->bpp_specified and mode->refresh_specified as is,
lets be consistent and just zero out the entire passed in struct at
the top of drm_mode_parse_command_line_for_connector()

Changes in v3:
-Drop "mode->specified = false;" line instead of the "return false;" (oops)
 This crasher was reported-by: kernel test robot <lkp@intel.com>

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/gpu/drm/drm_modes.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index beb764efe6b3..2a4eb619d7ad 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -1745,12 +1745,11 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 	char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
 	int i, len, ret;
 
+	memset(mode, 0, sizeof(*mode));
 	mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
 
-	if (!mode_option) {
-		mode->specified = false;
+	if (!mode_option)
 		return false;
-	}
 
 	name = mode_option;
 
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 12/13] drm/connector: Split out orientation quirk detection (v2)

[Hans de Goede]

From: Derek Basehore <dbasehore@chromium.org>

Not every platform needs quirk detection for panel orientation, so
split the drm_connector_init_panel_orientation_property into two
functions. One for platforms without the need for quirks, and the
other for platforms that need quirks.

Hans de Goede (changes in v2):

Rename the function from drm_connector_init_panel_orientation_property
to drm_connector_set_panel_orientation[_with_quirk] and pass in the
panel-orientation to set.

Beside the rename, also make the function set the passed in value
only once, if the value was set before (to a value other then
DRM_MODE_PANEL_ORIENTATION_UNKNOWN) make any further set calls a no-op.

This change is preparation for allowing the user to override the
panel-orientation for any connector from the kernel commandline.
When the panel-orientation is overridden this way, then we must ignore
the panel-orientation detection done by the driver.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/gpu/drm/drm_connector.c         | 74 ++++++++++++++++++-------
 drivers/gpu/drm/i915/display/icl_dsi.c  |  5 +-
 drivers/gpu/drm/i915/display/intel_dp.c |  9 ++-
 drivers/gpu/drm/i915/display/vlv_dsi.c  |  5 +-
 include/drm/drm_connector.h             |  9 ++-
 5 files changed, 71 insertions(+), 31 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 4c766624b20d..40a985c411a6 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1114,7 +1114,8 @@ static const struct drm_prop_enum_list hdmi_colorspaces[] = {
  *	coordinates, so if userspace rotates the picture to adjust for
  *	the orientation it must also apply the same transformation to the
  *	touchscreen input coordinates. This property is initialized by calling
- *	drm_connector_init_panel_orientation_property().
+ *	drm_connector_set_panel_orientation() or
+ *	drm_connector_set_panel_orientation_with_quirk()
  *
  * scaling mode:
  *	This property defines how a non-native mode is upscaled to the native
@@ -1986,38 +1987,41 @@ void drm_connector_set_vrr_capable_property(
 EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
 
 /**
- * drm_connector_init_panel_orientation_property -
- *	initialize the connecters panel_orientation property
- * @connector: connector for which to init the panel-orientation property.
- * @width: width in pixels of the panel, used for panel quirk detection
- * @height: height in pixels of the panel, used for panel quirk detection
+ * drm_connector_set_panel_orientation - sets the connecter's panel_orientation
+ * @connector: connector for which to set the panel-orientation property.
+ * @panel_orientation: drm_panel_orientation value to set
+ *
+ * This function sets the connector's panel_orientation and attaches
+ * a "panel orientation" property to the connector.
  *
- * This function should only be called for built-in panels, after setting
- * connector->display_info.panel_orientation first (if known).
+ * Calling this function on a connector where the panel_orientation has
+ * already been set is a no-op (e.g. the orientation has been overridden with
+ * a kernel commandline option).
  *
- * This function will check for platform specific (e.g. DMI based) quirks
- * overriding display_info.panel_orientation first, then if panel_orientation
- * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
- * "panel orientation" property to the connector.
+ * It is allowed to call this function with a panel_orientation of
+ * DRM_MODE_PANEL_ORIENTATION_UNKNOWN, in which case it is a no-op.
  *
  * Returns:
  * Zero on success, negative errno on failure.
  */
-int drm_connector_init_panel_orientation_property(
-	struct drm_connector *connector, int width, int height)
+int drm_connector_set_panel_orientation(
+	struct drm_connector *connector,
+	enum drm_panel_orientation panel_orientation)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_display_info *info = &connector->display_info;
 	struct drm_property *prop;
-	int orientation_quirk;
 
-	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
-	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
-		info->panel_orientation = orientation_quirk;
+	/* Already set? */
+	if (info->panel_orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+		return 0;
 
-	if (info->panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+	/* Don't attach the property if the orientation is unknown */
+	if (panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
 		return 0;
 
+	info->panel_orientation = panel_orientation;
+
 	prop = dev->mode_config.panel_orientation_property;
 	if (!prop) {
 		prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
@@ -2034,7 +2038,37 @@ int drm_connector_init_panel_orientation_property(
 				   info->panel_orientation);
 	return 0;
 }
-EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
+EXPORT_SYMBOL(drm_connector_set_panel_orientation);
+
+/**
+ * drm_connector_set_panel_orientation_with_quirk -
+ *	set the connecter's panel_orientation after checking for quirks
+ * @connector: connector for which to init the panel-orientation property.
+ * @panel_orientation: drm_panel_orientation value to set
+ * @width: width in pixels of the panel, used for panel quirk detection
+ * @height: height in pixels of the panel, used for panel quirk detection
+ *
+ * Like drm_connector_set_panel_orientation(), but with a check for platform
+ * specific (e.g. DMI based) quirks overriding the passed in panel_orientation.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_set_panel_orientation_with_quirk(
+	struct drm_connector *connector,
+	enum drm_panel_orientation panel_orientation,
+	int width, int height)
+{
+	int orientation_quirk;
+
+	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
+	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+		panel_orientation = orientation_quirk;
+
+	return drm_connector_set_panel_orientation(connector,
+						   panel_orientation);
+}
+EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk);
 
 int drm_connector_set_obj_prop(struct drm_mode_object *obj,
 				    struct drm_property *property,
diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 6e398c33a524..8cd51cf67d02 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -1536,9 +1536,8 @@ static void icl_dsi_add_properties(struct intel_connector *connector)
 
 	connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
 
-	connector->base.display_info.panel_orientation =
-			intel_dsi_get_panel_orientation(connector);
-	drm_connector_init_panel_orientation_property(&connector->base,
+	drm_connector_set_panel_orientation_with_quirk(&connector->base,
+				intel_dsi_get_panel_orientation(connector),
 				connector->panel.fixed_mode->hdisplay,
 				connector->panel.fixed_mode->vdisplay);
 }
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 9b15ac4f2fb6..7be7a55f8772 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -7091,9 +7091,12 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
 	intel_connector->panel.backlight.power = intel_edp_backlight_power;
 	intel_panel_setup_backlight(connector, pipe);
 
-	if (fixed_mode)
-		drm_connector_init_panel_orientation_property(
-			connector, fixed_mode->hdisplay, fixed_mode->vdisplay);
+	if (fixed_mode) {
+		/* We do not know the orientation, but their might be a quirk */
+		drm_connector_set_panel_orientation_with_quirk(connector,
+				DRM_MODE_PANEL_ORIENTATION_UNKNOWN,
+				fixed_mode->hdisplay, fixed_mode->vdisplay);
+	}
 
 	return true;
 
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
index a71b22bdd95b..fbb9b942ed90 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -1632,10 +1632,9 @@ static void vlv_dsi_add_properties(struct intel_connector *connector)
 
 		connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
 
-		connector->base.display_info.panel_orientation =
-			vlv_dsi_get_panel_orientation(connector);
-		drm_connector_init_panel_orientation_property(
+		drm_connector_set_panel_orientation_with_quirk(
 				&connector->base,
+				vlv_dsi_get_panel_orientation(connector),
 				connector->panel.fixed_mode->hdisplay,
 				connector->panel.fixed_mode->vdisplay);
 	}
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 3fbcf7d3fcaf..f7f02f58f5a7 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1547,8 +1547,13 @@ void drm_connector_set_link_status_property(struct drm_connector *connector,
 					    uint64_t link_status);
 void drm_connector_set_vrr_capable_property(
 		struct drm_connector *connector, bool capable);
-int drm_connector_init_panel_orientation_property(
-	struct drm_connector *connector, int width, int height);
+int drm_connector_set_panel_orientation(
+	struct drm_connector *connector,
+	enum drm_panel_orientation panel_orientation);
+int drm_connector_set_panel_orientation_with_quirk(
+	struct drm_connector *connector,
+	enum drm_panel_orientation panel_orientation,
+	int width, int height);
 int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
 					  int min, int max);
 
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 13/13] drm/connector: Hookup the new drm_cmdline_mode panel_orientation member

[Hans de Goede]

If the new video=... panel_orientation option is set for a connector, honor
it and setup a matching "panel orientation" property on the connector.

BugLink: https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/83
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/gpu/drm/drm_connector.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 40a985c411a6..591914f01cd4 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -140,6 +140,13 @@ static void drm_connector_get_cmdline_mode(struct drm_connector *connector)
 		connector->force = mode->force;
 	}
 
+	if (mode->panel_orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN) {
+		DRM_INFO("setting connector %s panel_orientation to %d\n",
+			 connector->name, mode->panel_orientation);
+		drm_connector_set_panel_orientation(connector,
+						    mode->panel_orientation);
+	}
+
 	DRM_DEBUG_KMS("cmdline mode for connector %s %s %dx%d@%dHz%s%s%s\n",
 		      connector->name, mode->name,
 		      mode->xres, mode->yres,
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 11/13] drm/modes: parse_cmdline: Explicitly memset the passed in drm_cmdline_mode struct

[Maxime Ripard]

[-- Attachment #1.1: Type: text/plain, Size: 613 bytes --]

On Mon, Nov 18, 2019 at 04:51:32PM +0100, Hans de Goede wrote:
> Instead of only setting mode->specified on false on an early exit and
> leaving e.g. mode->bpp_specified and mode->refresh_specified as is,
> lets be consistent and just zero out the entire passed in struct at
> the top of drm_mode_parse_command_line_for_connector()
>
> Changes in v3:
> -Drop "mode->specified = false;" line instead of the "return false;" (oops)
>  This crasher was reported-by: kernel test robot <lkp@intel.com>
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Acked-by: Maxime Ripard <mripard@kernel.org>

Thanks!
Maxime

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 12/13] drm/connector: Split out orientation quirk detection (v2)

[Hans de Goede]

Hi All,

Can I get a review or Acked-by from someone for this patch please?

The other patches in this series all have acks and it would be nice if
I can push this to drm-misc-next...

Regards,

Hans

On 18-11-2019 16:51, Hans de Goede wrote:
> From: Derek Basehore <dbasehore@chromium.org>
> 
> Not every platform needs quirk detection for panel orientation, so
> split the drm_connector_init_panel_orientation_property into two
> functions. One for platforms without the need for quirks, and the
> other for platforms that need quirks.
> 
> Hans de Goede (changes in v2):
> 
> Rename the function from drm_connector_init_panel_orientation_property
> to drm_connector_set_panel_orientation[_with_quirk] and pass in the
> panel-orientation to set.
> 
> Beside the rename, also make the function set the passed in value
> only once, if the value was set before (to a value other then
> DRM_MODE_PANEL_ORIENTATION_UNKNOWN) make any further set calls a no-op.
> 
> This change is preparation for allowing the user to override the
> panel-orientation for any connector from the kernel commandline.
> When the panel-orientation is overridden this way, then we must ignore
> the panel-orientation detection done by the driver.
> 
> Signed-off-by: Derek Basehore <dbasehore@chromium.org>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>   drivers/gpu/drm/drm_connector.c         | 74 ++++++++++++++++++-------
>   drivers/gpu/drm/i915/display/icl_dsi.c  |  5 +-
>   drivers/gpu/drm/i915/display/intel_dp.c |  9 ++-
>   drivers/gpu/drm/i915/display/vlv_dsi.c  |  5 +-
>   include/drm/drm_connector.h             |  9 ++-
>   5 files changed, 71 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index 4c766624b20d..40a985c411a6 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -1114,7 +1114,8 @@ static const struct drm_prop_enum_list hdmi_colorspaces[] = {
>    *	coordinates, so if userspace rotates the picture to adjust for
>    *	the orientation it must also apply the same transformation to the
>    *	touchscreen input coordinates. This property is initialized by calling
> - *	drm_connector_init_panel_orientation_property().
> + *	drm_connector_set_panel_orientation() or
> + *	drm_connector_set_panel_orientation_with_quirk()
>    *
>    * scaling mode:
>    *	This property defines how a non-native mode is upscaled to the native
> @@ -1986,38 +1987,41 @@ void drm_connector_set_vrr_capable_property(
>   EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
>   
>   /**
> - * drm_connector_init_panel_orientation_property -
> - *	initialize the connecters panel_orientation property
> - * @connector: connector for which to init the panel-orientation property.
> - * @width: width in pixels of the panel, used for panel quirk detection
> - * @height: height in pixels of the panel, used for panel quirk detection
> + * drm_connector_set_panel_orientation - sets the connecter's panel_orientation
> + * @connector: connector for which to set the panel-orientation property.
> + * @panel_orientation: drm_panel_orientation value to set
> + *
> + * This function sets the connector's panel_orientation and attaches
> + * a "panel orientation" property to the connector.
>    *
> - * This function should only be called for built-in panels, after setting
> - * connector->display_info.panel_orientation first (if known).
> + * Calling this function on a connector where the panel_orientation has
> + * already been set is a no-op (e.g. the orientation has been overridden with
> + * a kernel commandline option).
>    *
> - * This function will check for platform specific (e.g. DMI based) quirks
> - * overriding display_info.panel_orientation first, then if panel_orientation
> - * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
> - * "panel orientation" property to the connector.
> + * It is allowed to call this function with a panel_orientation of
> + * DRM_MODE_PANEL_ORIENTATION_UNKNOWN, in which case it is a no-op.
>    *
>    * Returns:
>    * Zero on success, negative errno on failure.
>    */
> -int drm_connector_init_panel_orientation_property(
> -	struct drm_connector *connector, int width, int height)
> +int drm_connector_set_panel_orientation(
> +	struct drm_connector *connector,
> +	enum drm_panel_orientation panel_orientation)
>   {
>   	struct drm_device *dev = connector->dev;
>   	struct drm_display_info *info = &connector->display_info;
>   	struct drm_property *prop;
> -	int orientation_quirk;
>   
> -	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
> -	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> -		info->panel_orientation = orientation_quirk;
> +	/* Already set? */
> +	if (info->panel_orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> +		return 0;
>   
> -	if (info->panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> +	/* Don't attach the property if the orientation is unknown */
> +	if (panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
>   		return 0;
>   
> +	info->panel_orientation = panel_orientation;
> +
>   	prop = dev->mode_config.panel_orientation_property;
>   	if (!prop) {
>   		prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
> @@ -2034,7 +2038,37 @@ int drm_connector_init_panel_orientation_property(
>   				   info->panel_orientation);
>   	return 0;
>   }
> -EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
> +EXPORT_SYMBOL(drm_connector_set_panel_orientation);
> +
> +/**
> + * drm_connector_set_panel_orientation_with_quirk -
> + *	set the connecter's panel_orientation after checking for quirks
> + * @connector: connector for which to init the panel-orientation property.
> + * @panel_orientation: drm_panel_orientation value to set
> + * @width: width in pixels of the panel, used for panel quirk detection
> + * @height: height in pixels of the panel, used for panel quirk detection
> + *
> + * Like drm_connector_set_panel_orientation(), but with a check for platform
> + * specific (e.g. DMI based) quirks overriding the passed in panel_orientation.
> + *
> + * Returns:
> + * Zero on success, negative errno on failure.
> + */
> +int drm_connector_set_panel_orientation_with_quirk(
> +	struct drm_connector *connector,
> +	enum drm_panel_orientation panel_orientation,
> +	int width, int height)
> +{
> +	int orientation_quirk;
> +
> +	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
> +	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> +		panel_orientation = orientation_quirk;
> +
> +	return drm_connector_set_panel_orientation(connector,
> +						   panel_orientation);
> +}
> +EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk);
>   
>   int drm_connector_set_obj_prop(struct drm_mode_object *obj,
>   				    struct drm_property *property,
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 6e398c33a524..8cd51cf67d02 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -1536,9 +1536,8 @@ static void icl_dsi_add_properties(struct intel_connector *connector)
>   
>   	connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>   
> -	connector->base.display_info.panel_orientation =
> -			intel_dsi_get_panel_orientation(connector);
> -	drm_connector_init_panel_orientation_property(&connector->base,
> +	drm_connector_set_panel_orientation_with_quirk(&connector->base,
> +				intel_dsi_get_panel_orientation(connector),
>   				connector->panel.fixed_mode->hdisplay,
>   				connector->panel.fixed_mode->vdisplay);
>   }
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 9b15ac4f2fb6..7be7a55f8772 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -7091,9 +7091,12 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
>   	intel_connector->panel.backlight.power = intel_edp_backlight_power;
>   	intel_panel_setup_backlight(connector, pipe);
>   
> -	if (fixed_mode)
> -		drm_connector_init_panel_orientation_property(
> -			connector, fixed_mode->hdisplay, fixed_mode->vdisplay);
> +	if (fixed_mode) {
> +		/* We do not know the orientation, but their might be a quirk */
> +		drm_connector_set_panel_orientation_with_quirk(connector,
> +				DRM_MODE_PANEL_ORIENTATION_UNKNOWN,
> +				fixed_mode->hdisplay, fixed_mode->vdisplay);
> +	}
>   
>   	return true;
>   
> diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
> index a71b22bdd95b..fbb9b942ed90 100644
> --- a/drivers/gpu/drm/i915/display/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
> @@ -1632,10 +1632,9 @@ static void vlv_dsi_add_properties(struct intel_connector *connector)
>   
>   		connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>   
> -		connector->base.display_info.panel_orientation =
> -			vlv_dsi_get_panel_orientation(connector);
> -		drm_connector_init_panel_orientation_property(
> +		drm_connector_set_panel_orientation_with_quirk(
>   				&connector->base,
> +				vlv_dsi_get_panel_orientation(connector),
>   				connector->panel.fixed_mode->hdisplay,
>   				connector->panel.fixed_mode->vdisplay);
>   	}
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 3fbcf7d3fcaf..f7f02f58f5a7 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -1547,8 +1547,13 @@ void drm_connector_set_link_status_property(struct drm_connector *connector,
>   					    uint64_t link_status);
>   void drm_connector_set_vrr_capable_property(
>   		struct drm_connector *connector, bool capable);
> -int drm_connector_init_panel_orientation_property(
> -	struct drm_connector *connector, int width, int height);
> +int drm_connector_set_panel_orientation(
> +	struct drm_connector *connector,
> +	enum drm_panel_orientation panel_orientation);
> +int drm_connector_set_panel_orientation_with_quirk(
> +	struct drm_connector *connector,
> +	enum drm_panel_orientation panel_orientation,
> +	int width, int height);
>   int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
>   					  int min, int max);
>   
> 

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel