From: Marc Zyngier <marc.zyngier@arm.com>
To: linux-arm-kernel@lists.infradead.org,
kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org
Cc: "Raslan, KarimAllah" <karahmed@amazon.de>
Subject: [PATCH 0/8] KVM: arm/arm64: vgic: ITS translation cache
Date: Thu, 6 Jun 2019 17:54:47 +0100 [thread overview]
Message-ID: <20190606165455.162478-1-marc.zyngier@arm.com> (raw)
It recently became apparent[1] that our LPI injection path is not as
efficient as it could be when injecting interrupts coming from a VFIO
assigned device.
Although the proposed patch wasn't 100% correct, it outlined at least
two issues:
(1) Injecting an LPI from VFIO always results in a context switch to a
worker thread: no good
(2) We have no way of amortising the cost of translating a DID+EID pair
to an LPI number
The reason for (1) is that we may sleep when translating an LPI, so we
do need a context process. A way to fix that is to implement a small
LPI translation cache that could be looked up from an atomic
context. It would also solve (2).
This is what this small series proposes. it implements a very basic
LRU cache of pre-translated LPIs, which gets used to implement
kvm_arch_set_irq_inatomic. The size of the cache is currently
hard-coded at 4 times the number of vcpus, a number I have randomly
chosen with the utmost care.
Does it work? well, it doesn't crash, and is thus perfect. More
seriously, I don't really have a way to benchmark it directly, so my
observations are indirect:
On a TX2 system, I run a 4 vcpu VM with an Ethernet interface passed
to it directly. From the host, I inject interrupts using debugfs. In
parallel, I look at the number of context switch, and the number of
interrupts on the host. Without this series, I get the same number for
both IRQ and CS (about half a million of each per second is pretty
easy to reach). With this series, the number of context switches drops
to something pretty small (in the low 2k), while the number of
interrupts stays the same.
Yes, this is a pretty rubbish benchmark, what did you expect? ;-)
So I'm putting this out for people with real workloads to try out and
report what they see.
[1] https://lore.kernel.org/lkml/1552833373-19828-1-git-send-email-yuzenghui@huawei.com/
Marc Zyngier (8):
KVM: arm/arm64: vgic: Add LPI translation cache definition
KVM: arm/arm64: vgic: Add __vgic_put_lpi_locked primitive
KVM: arm/arm64: vgic-its: Cache successful MSI->LPI translation
KVM: arm/arm64: vgic-its: Add kvm parameter to
vgic_its_free_collection
KVM: arm/arm64: vgic-its: Invalidate MSI-LPI translation cache on
specific commands
KVM: arm/arm64: vgic-its: Invalidate MSI-LPI translation cache on
disabling LPIs
KVM: arm/arm64: vgic-its: Check the LPI translation cache on MSI
injection
KVM: arm/arm64: vgic-irqfd: Implement kvm_arch_set_irq_inatomic
include/kvm/arm_vgic.h | 10 +++
virt/kvm/arm/vgic/vgic-init.c | 34 ++++++++
virt/kvm/arm/vgic/vgic-irqfd.c | 36 ++++++--
virt/kvm/arm/vgic/vgic-its.c | 143 +++++++++++++++++++++++++++++--
virt/kvm/arm/vgic/vgic-mmio-v3.c | 4 +-
virt/kvm/arm/vgic/vgic.c | 26 ++++--
virt/kvm/arm/vgic/vgic.h | 6 ++
7 files changed, 238 insertions(+), 21 deletions(-)
--
2.20.1
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
next reply other threads:[~2019-06-06 16:55 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-06 16:54 Marc Zyngier [this message]
2019-06-06 16:54 ` [PATCH 1/8] KVM: arm/arm64: vgic: Add LPI translation cache definition Marc Zyngier
2019-06-07 3:47 ` Saidi, Ali
2019-06-07 7:38 ` Marc Zyngier
2019-06-07 8:12 ` Julien Thierry
2019-06-07 8:38 ` Marc Zyngier
2019-06-07 12:09 ` Auger Eric
2019-06-07 12:44 ` Marc Zyngier
2019-06-07 14:15 ` Auger Eric
2019-06-07 15:04 ` Marc Zyngier
2019-06-06 16:54 ` [PATCH 2/8] KVM: arm/arm64: vgic: Add __vgic_put_lpi_locked primitive Marc Zyngier
2019-06-07 12:11 ` Auger Eric
2019-06-06 16:54 ` [PATCH 3/8] KVM: arm/arm64: vgic-its: Cache successful MSI->LPI translation Marc Zyngier
2019-06-07 8:35 ` Julien Thierry
2019-06-07 8:51 ` Marc Zyngier
2019-06-07 8:56 ` Julien Thierry
2019-06-07 9:16 ` Marc Zyngier
2019-06-07 14:29 ` Auger Eric
2019-06-06 16:54 ` [PATCH 4/8] KVM: arm/arm64: vgic-its: Add kvm parameter to vgic_its_free_collection Marc Zyngier
2019-06-07 14:29 ` Auger Eric
2019-06-07 14:49 ` Marc Zyngier
2019-06-06 16:54 ` [PATCH 5/8] KVM: arm/arm64: vgic-its: Invalidate MSI-LPI translation cache on specific commands Marc Zyngier
2019-06-06 16:54 ` [PATCH 6/8] KVM: arm/arm64: vgic-its: Invalidate MSI-LPI translation cache on disabling LPIs Marc Zyngier
2019-06-06 16:54 ` [PATCH 7/8] KVM: arm/arm64: vgic-its: Check the LPI translation cache on MSI injection Marc Zyngier
2019-06-06 16:54 ` [PATCH 8/8] KVM: arm/arm64: vgic-irqfd: Implement kvm_arch_set_irq_inatomic Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190606165455.162478-1-marc.zyngier@arm.com \
--to=marc.zyngier@arm.com \
--cc=karahmed@amazon.de \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).