linux-acpi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: "Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Bjorn Helgaas <bhelgaas@google.com>
Cc: Len Brown <lenb@kernel.org>, Lukas Wunner <lukas@wunner.de>,
	Keith Busch <keith.busch@intel.com>,
	Alex Williamson <alex.williamson@redhat.com>,
	Alexandru Gagniuc <mr.nuke.me@gmail.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	linux-acpi@vger.kernel.org, linux-pci@vger.kernel.org
Subject: [PATCH v2 0/3] PCI / ACPI: Handle sibling devices sharing power resources
Date: Tue, 18 Jun 2019 19:18:55 +0300	[thread overview]
Message-ID: <20190618161858.77834-1-mika.westerberg@linux.intel.com> (raw)

Hi all,

Based on a discussion regarding patch series I sent previously [1] to deal
with sibling devices sharing ACPI power resources, I prepared a new
reworked version according to the comments I got.

To summarize, in Intel Ice Lake the Thunderbolt controller, PCIe root ports
and xHCI all share power resources. When they are all in D3hot power
resources (returned by _PR3) can be turned off powering off the whole
block. However, there are two issues around this.

Firstly the PCI core sets the device power state by asking what the real
ACPI power state is. This results that all but last device sharing the
power resources are in D3hot when the power resources are turned off. This
causes issues if user runs for example 'lspci' because the device is really
in D3cold so what user gets back is all ones (0xffffffff).

Secondly if any of the device is runtime resumed the power resources are
turned on bringing all other devices sharing the resources to
D0uninitialized losing their wakeup configuration.

This series aims to fix the two issues by:

  1. Using the ACPI cached power state when PCI devices are transitioned
     into low power states instead of reading back the "real" power state.

  2. Introducing concept of "_PR0 dependent devices" that get runtime
     resumed whenever their power resource (which they might share with
     other sibling devices) gets turned on.

The series is based on the idea of Rafael J. Wysocki <rafael@kernel.org>.

[1] https://www.spinics.net/lists/linux-pci/msg83583.html

Mika Westerberg (3):
  PCI / ACPI: Use cached ACPI device state to get PCI device power state
  ACPI / PM: Introduce concept of a _PR0 dependent device
  PCI / ACPI: Add _PR0 dependent devices

 drivers/acpi/power.c    | 139 ++++++++++++++++++++++++++++++++++++++++
 drivers/pci/pci-acpi.c  |   5 +-
 include/acpi/acpi_bus.h |   4 ++
 3 files changed, 147 insertions(+), 1 deletion(-)

-- 
2.20.1


             reply	other threads:[~2019-06-18 16:19 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-18 16:18 Mika Westerberg [this message]
2019-06-18 16:18 ` [PATCH v2 1/3] PCI / ACPI: Use cached ACPI device state to get PCI device power state Mika Westerberg
2019-06-19 21:28   ` Bjorn Helgaas
2019-06-20  8:27     ` Mika Westerberg
2019-06-20 13:16       ` Bjorn Helgaas
2019-06-20 13:37         ` Mika Westerberg
2019-06-20 14:15           ` Bjorn Helgaas
2019-06-21 10:32             ` Rafael J. Wysocki
2019-06-21 13:09               ` Bjorn Helgaas
2019-06-22  8:51                 ` Rafael J. Wysocki
2019-06-24 10:57                   ` Mika Westerberg
2019-06-24 11:14               ` Rafael J. Wysocki
2019-06-25  9:45                 ` Mika Westerberg
2019-06-25 10:00                   ` Rafael J. Wysocki
2019-06-25 10:08                     ` Mika Westerberg
2019-06-21 11:56   ` Rafael J. Wysocki
2019-06-24 10:58     ` Mika Westerberg
2019-06-18 16:18 ` [PATCH v2 2/3] ACPI / PM: Introduce concept of a _PR0 dependent device Mika Westerberg
2019-06-19 13:20   ` Rafael J. Wysocki
2019-06-19 13:34     ` Mika Westerberg
2019-06-18 16:18 ` [PATCH v2 3/3] PCI / ACPI: Add _PR0 dependent devices Mika Westerberg
2019-06-19 13:24 ` [PATCH v2 0/3] PCI / ACPI: Handle sibling devices sharing power resources Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190618161858.77834-1-mika.westerberg@linux.intel.com \
    --to=mika.westerberg@linux.intel.com \
    --cc=alex.williamson@redhat.com \
    --cc=bhelgaas@google.com \
    --cc=keith.busch@intel.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=mr.nuke.me@gmail.com \
    --cc=rjw@rjwysocki.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).