linux-amlogic.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Remi Pommarel <repk@triplefau.lt>
To: Kishon Vijay Abraham I <kishon@ti.com>,
	Yue Wang <yue.wang@Amlogic.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
	Remi Pommarel <repk@triplefau.lt>,
	linux-kernel@vger.kernel.org,
	Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH v4 7/7] PCI: amlogic: Use AXG PCIE and shared MIPI/PCIE PHYs
Date: Wed, 15 Jan 2020 13:29:08 +0100	[thread overview]
Message-ID: <20200115122908.16954-8-repk@triplefau.lt> (raw)
In-Reply-To: <20200115122908.16954-1-repk@triplefau.lt>

Now that PCIE PHY has been introduced for AXG, the whole has_shared_phy
logic can be mutualized between AXG and G12A platforms.

This also makes use of the optional MIPI/PCIE shared fonctionality PHY
found on AXG platforms, which need to be used in order to have reliable
PCIE communications.

Signed-off-by: Remi Pommarel <repk@triplefau.lt>
---
 drivers/pci/controller/dwc/pci-meson.c | 140 ++++++++-----------------
 1 file changed, 46 insertions(+), 94 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
index 3772b02a5c55..309e75f554ac 100644
--- a/drivers/pci/controller/dwc/pci-meson.c
+++ b/drivers/pci/controller/dwc/pci-meson.c
@@ -66,7 +66,6 @@
 #define PORT_CLK_RATE			100000000UL
 #define MAX_PAYLOAD_SIZE		256
 #define MAX_READ_REQ_SIZE		256
-#define MESON_PCIE_PHY_POWERUP		0x1c
 #define PCIE_RESET_DELAY		500
 #define PCIE_SHARED_RESET		1
 #define PCIE_NORMAL_RESET		0
@@ -81,26 +80,19 @@ enum pcie_data_rate {
 struct meson_pcie_mem_res {
 	void __iomem *elbi_base;
 	void __iomem *cfg_base;
-	void __iomem *phy_base;
 };
 
 struct meson_pcie_clk_res {
 	struct clk *clk;
-	struct clk *mipi_gate;
 	struct clk *port_clk;
 	struct clk *general_clk;
 };
 
 struct meson_pcie_rc_reset {
-	struct reset_control *phy;
 	struct reset_control *port;
 	struct reset_control *apb;
 };
 
-struct meson_pcie_param {
-	bool has_shared_phy;
-};
-
 struct meson_pcie {
 	struct dw_pcie pci;
 	struct meson_pcie_mem_res mem_res;
@@ -108,7 +100,7 @@ struct meson_pcie {
 	struct meson_pcie_rc_reset mrst;
 	struct gpio_desc *reset_gpio;
 	struct phy *phy;
-	const struct meson_pcie_param *param;
+	struct phy *shared_phy;
 };
 
 static struct reset_control *meson_pcie_get_reset(struct meson_pcie *mp,
@@ -130,13 +122,6 @@ static int meson_pcie_get_resets(struct meson_pcie *mp)
 {
 	struct meson_pcie_rc_reset *mrst = &mp->mrst;
 
-	if (!mp->param->has_shared_phy) {
-		mrst->phy = meson_pcie_get_reset(mp, "phy", PCIE_SHARED_RESET);
-		if (IS_ERR(mrst->phy))
-			return PTR_ERR(mrst->phy);
-		reset_control_deassert(mrst->phy);
-	}
-
 	mrst->port = meson_pcie_get_reset(mp, "port", PCIE_NORMAL_RESET);
 	if (IS_ERR(mrst->port))
 		return PTR_ERR(mrst->port);
@@ -162,22 +147,6 @@ static void __iomem *meson_pcie_get_mem(struct platform_device *pdev,
 	return devm_ioremap_resource(dev, res);
 }
 
-static void __iomem *meson_pcie_get_mem_shared(struct platform_device *pdev,
-					       struct meson_pcie *mp,
-					       const char *id)
-{
-	struct device *dev = mp->pci.dev;
-	struct resource *res;
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, id);
-	if (!res) {
-		dev_err(dev, "No REG resource %s\n", id);
-		return ERR_PTR(-ENXIO);
-	}
-
-	return devm_ioremap(dev, res->start, resource_size(res));
-}
-
 static int meson_pcie_get_mems(struct platform_device *pdev,
 			       struct meson_pcie *mp)
 {
@@ -189,14 +158,6 @@ static int meson_pcie_get_mems(struct platform_device *pdev,
 	if (IS_ERR(mp->mem_res.cfg_base))
 		return PTR_ERR(mp->mem_res.cfg_base);
 
-	/* Meson AXG SoC has two PCI controllers use same phy register */
-	if (!mp->param->has_shared_phy) {
-		mp->mem_res.phy_base =
-			meson_pcie_get_mem_shared(pdev, mp, "phy");
-		if (IS_ERR(mp->mem_res.phy_base))
-			return PTR_ERR(mp->mem_res.phy_base);
-	}
-
 	return 0;
 }
 
@@ -204,20 +165,40 @@ static int meson_pcie_power_on(struct meson_pcie *mp)
 {
 	int ret = 0;
 
-	if (mp->param->has_shared_phy) {
-		ret = phy_init(mp->phy);
-		if (ret)
-			return ret;
+	ret = phy_init(mp->phy);
+	if (ret)
+		goto err;
 
-		ret = phy_power_on(mp->phy);
-		if (ret) {
-			phy_exit(mp->phy);
-			return ret;
-		}
-	} else
-		writel(MESON_PCIE_PHY_POWERUP, mp->mem_res.phy_base);
+	ret = phy_init(mp->shared_phy);
+	if (ret)
+		goto exit;
+
+	ret = phy_power_on(mp->phy);
+	if (ret)
+		goto shared_exit;
+
+	ret = phy_power_on(mp->shared_phy);
+	if (ret)
+		goto power_off;
 
 	return 0;
+
+power_off:
+	phy_power_off(mp->phy);
+shared_exit:
+	phy_exit(mp->shared_phy);
+exit:
+	phy_exit(mp->phy);
+err:
+	return ret;
+}
+
+static void meson_pcie_power_off(struct meson_pcie *mp)
+{
+	phy_power_off(mp->shared_phy);
+	phy_power_off(mp->phy);
+	phy_exit(mp->shared_phy);
+	phy_exit(mp->phy);
 }
 
 static int meson_pcie_reset(struct meson_pcie *mp)
@@ -225,16 +206,13 @@ static int meson_pcie_reset(struct meson_pcie *mp)
 	struct meson_pcie_rc_reset *mrst = &mp->mrst;
 	int ret = 0;
 
-	if (mp->param->has_shared_phy) {
-		ret = phy_reset(mp->phy);
-		if (ret)
-			return ret;
-	} else {
-		reset_control_assert(mrst->phy);
-		udelay(PCIE_RESET_DELAY);
-		reset_control_deassert(mrst->phy);
-		udelay(PCIE_RESET_DELAY);
-	}
+	ret = phy_reset(mp->phy);
+	if (ret)
+		return ret;
+
+	ret = phy_reset(mp->shared_phy);
+	if (ret)
+		return ret;
 
 	reset_control_assert(mrst->port);
 	reset_control_assert(mrst->apb);
@@ -286,12 +264,6 @@ static int meson_pcie_probe_clocks(struct meson_pcie *mp)
 	if (IS_ERR(res->port_clk))
 		return PTR_ERR(res->port_clk);
 
-	if (!mp->param->has_shared_phy) {
-		res->mipi_gate = meson_pcie_probe_clock(dev, "mipi", 0);
-		if (IS_ERR(res->mipi_gate))
-			return PTR_ERR(res->mipi_gate);
-	}
-
 	res->general_clk = meson_pcie_probe_clock(dev, "general", 0);
 	if (IS_ERR(res->general_clk))
 		return PTR_ERR(res->general_clk);
@@ -562,7 +534,6 @@ static const struct dw_pcie_ops dw_pcie_ops = {
 
 static int meson_pcie_probe(struct platform_device *pdev)
 {
-	const struct meson_pcie_param *match_data;
 	struct device *dev = &pdev->dev;
 	struct dw_pcie *pci;
 	struct meson_pcie *mp;
@@ -576,18 +547,13 @@ static int meson_pcie_probe(struct platform_device *pdev)
 	pci->dev = dev;
 	pci->ops = &dw_pcie_ops;
 
-	match_data = of_device_get_match_data(dev);
-	if (!match_data) {
-		dev_err(dev, "failed to get match data\n");
-		return -ENODEV;
-	}
-	mp->param = match_data;
+	mp->phy = devm_phy_get(dev, "pcie");
+	if (IS_ERR(mp->phy))
+		return PTR_ERR(mp->phy);
 
-	if (mp->param->has_shared_phy) {
-		mp->phy = devm_phy_get(dev, "pcie");
-		if (IS_ERR(mp->phy))
-			return PTR_ERR(mp->phy);
-	}
+	mp->shared_phy = devm_phy_optional_get(dev, "shared");
+	if (IS_ERR(mp->shared_phy))
+		return PTR_ERR(mp->shared_phy);
 
 	mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(mp->reset_gpio)) {
@@ -636,30 +602,16 @@ static int meson_pcie_probe(struct platform_device *pdev)
 	return 0;
 
 err_phy:
-	if (mp->param->has_shared_phy) {
-		phy_power_off(mp->phy);
-		phy_exit(mp->phy);
-	}
-
+	meson_pcie_power_off(mp);
 	return ret;
 }
 
-static struct meson_pcie_param meson_pcie_axg_param = {
-	.has_shared_phy = false,
-};
-
-static struct meson_pcie_param meson_pcie_g12a_param = {
-	.has_shared_phy = true,
-};
-
 static const struct of_device_id meson_pcie_of_match[] = {
 	{
 		.compatible = "amlogic,axg-pcie",
-		.data = &meson_pcie_axg_param,
 	},
 	{
 		.compatible = "amlogic,g12a-pcie",
-		.data = &meson_pcie_g12a_param,
 	},
 	{},
 };
-- 
2.24.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2020-01-15 12:22 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-15 12:29 [PATCH v4 0/7] PCI: amlogic: Make PCIe working reliably on AXG platforms Remi Pommarel
2020-01-15 12:29 ` [PATCH v4 1/7] dt-bindings: Add AXG PCIE PHY bindings Remi Pommarel
2020-01-15 12:29 ` [PATCH v4 2/7] dt-bindings: Add AXG shared MIPI/PCIE " Remi Pommarel
2020-01-21 23:05   ` Rob Herring
2020-01-21 23:08     ` Rob Herring
2020-01-15 12:29 ` [PATCH v4 3/7] dt-bindings: PCI: meson: Update PCIE bindings documentation Remi Pommarel
2020-01-15 12:29 ` [PATCH v4 4/7] arm64: dts: meson-axg: Add PCIE PHY nodes Remi Pommarel
2020-01-15 12:29 ` [PATCH v4 5/7] phy: amlogic: Add Amlogic AXG MIPI/PCIE PHY Driver Remi Pommarel
2020-01-15 12:29 ` [PATCH v4 6/7] phy: amlogic: Add Amlogic AXG PCIE " Remi Pommarel
2020-01-15 12:29 ` Remi Pommarel [this message]
2020-01-15 12:30   ` [PATCH v4 7/7] PCI: amlogic: Use AXG PCIE and shared MIPI/PCIE PHYs Neil Armstrong
2020-01-15 13:40     ` Remi Pommarel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200115122908.16954-8-repk@triplefau.lt \
    --to=repk@triplefau.lt \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=kishon@ti.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=narmstrong@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=yue.wang@Amlogic.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).