[PATCH 2/2] i2c: meson: add support for Meson G12A SoC I2C controller

[narmstrong@baylibre.com (Neil Armstrong)]

On 29/11/2018 11:59, Jian Hu wrote:
> Add compatible and data for G12A I2C controller.
> 
> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
> ---
>  drivers/i2c/busses/i2c-meson.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
> index 90f5d04..b86eed7 100644
> --- a/drivers/i2c/busses/i2c-meson.c
> +++ b/drivers/i2c/busses/i2c-meson.c
> @@ -462,10 +462,15 @@ static int meson_i2c_remove(struct platform_device *pdev)
>  	.div_factor = 3,
>  };
>  
> +static const struct meson_i2c_data i2c_g12a_data = {
> +	.div_factor = 3,

Especially if the div_factor is the same as AXG.

If you have some other fixes for G12a in the pipe, you will add the new compatible and meson_i2c_data later,
for the div_factor, simply use the axg struct and compatible.

Neil

> +};
> +
>  static const struct of_device_id meson_i2c_match[] = {
>  	{ .compatible = "amlogic,meson6-i2c", .data = &i2c_meson6_data },
>  	{ .compatible = "amlogic,meson-gxbb-i2c", .data = &i2c_gxbb_data },
>  	{ .compatible = "amlogic,meson-axg-i2c", .data = &i2c_axg_data },
> +	{ .compatible = "amlogic,meson-g12a-i2c", .data = &i2c_g12a_data },
>  	{},
>  };
>  
>