* [PATCH v4] ARM: dts: qcom: add CM-QS600 board
@ 2014-10-01 16:09 Mike Rapoport
2014-10-10 7:36 ` Igor Grinberg
0 siblings, 1 reply; 2+ messages in thread
From: Mike Rapoport @ 2014-10-01 16:09 UTC (permalink / raw)
To: linux-arm-kernel
CM-QS600 is a APQ8064 based computer on module.
The details are available at
http://compulab.co.il/products/computer-on-modules/cm-qs600/
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
---
v2 changes: duplicate the settings for the cm-qs600 board in its .dts file as Kumar suggested
v3 changes: add board details and keep dts Makefile sorted alphabetically
v4 changes: fix eeprom defintion and update subject as per Igor's comments
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 59 +++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index aaa1a68..3243722 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -339,6 +339,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
orion5x-rd88f5182-nas.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_QCOM) += \
+ qcom-apq8064-cm-qs600.dtb \
qcom-apq8064-ifc6410.dtb \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
new file mode 100644
index 0000000..5d75666
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -0,0 +1,59 @@
+#include "qcom-apq8064-v2.0.dtsi"
+
+/ {
+ model = "CompuLab CM-QS600";
+ compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
+
+ soc {
+ pinctrl at 800000 {
+ i2c1_pins: i2c1 {
+ mux {
+ pins = "gpio20", "gpio21";
+ function = "gsbi1";
+ };
+ };
+ };
+
+ gsbi at 12440000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C>;
+
+ i2c at 12460000 {
+ status = "okay";
+ clock-frequency = <200000>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ eeprom: eeprom at 50 {
+ compatible = "24c02";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+ };
+ };
+
+ gsbi at 16600000 {
+ status = "ok";
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ serial at 16640000 {
+ status = "ok";
+ };
+ };
+
+ amba {
+ /* eMMC */
+ sdcc1: sdcc at 12400000 {
+ status = "okay";
+ };
+
+ /* External micro SD card */
+ sdcc3: sdcc at 12180000 {
+ status = "okay";
+ };
+ /* WLAN */
+ sdcc4: sdcc at 121c0000 {
+ status = "okay";
+ };
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH v4] ARM: dts: qcom: add CM-QS600 board
2014-10-01 16:09 [PATCH v4] ARM: dts: qcom: add CM-QS600 board Mike Rapoport
@ 2014-10-10 7:36 ` Igor Grinberg
0 siblings, 0 replies; 2+ messages in thread
From: Igor Grinberg @ 2014-10-10 7:36 UTC (permalink / raw)
To: linux-arm-kernel
Hi Kumar,
As I've understand from Kevin's letter, we can submit the DT only
platforms addition also for 3.18.
Can we please have this one applied?
Thanks!
On 10/01/14 19:09, Mike Rapoport wrote:
> CM-QS600 is a APQ8064 based computer on module.
> The details are available at
> http://compulab.co.il/products/computer-on-modules/cm-qs600/
>
> Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
> ---
> v2 changes: duplicate the settings for the cm-qs600 board in its .dts file as Kumar suggested
> v3 changes: add board details and keep dts Makefile sorted alphabetically
> v4 changes: fix eeprom defintion and update subject as per Igor's comments
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 59 +++++++++++++++++++++++++++++
> 2 files changed, 60 insertions(+)
> create mode 100644 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index aaa1a68..3243722 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -339,6 +339,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
> orion5x-rd88f5182-nas.dtb
> dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
> dtb-$(CONFIG_ARCH_QCOM) += \
> + qcom-apq8064-cm-qs600.dtb \
> qcom-apq8064-ifc6410.dtb \
> qcom-apq8074-dragonboard.dtb \
> qcom-apq8084-ifc6540.dtb \
> diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> new file mode 100644
> index 0000000..5d75666
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> @@ -0,0 +1,59 @@
> +#include "qcom-apq8064-v2.0.dtsi"
> +
> +/ {
> + model = "CompuLab CM-QS600";
> + compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
> +
> + soc {
> + pinctrl at 800000 {
> + i2c1_pins: i2c1 {
> + mux {
> + pins = "gpio20", "gpio21";
> + function = "gsbi1";
> + };
> + };
> + };
> +
> + gsbi at 12440000 {
> + status = "okay";
> + qcom,mode = <GSBI_PROT_I2C>;
> +
> + i2c at 12460000 {
> + status = "okay";
> + clock-frequency = <200000>;
> + pinctrl-0 = <&i2c1_pins>;
> + pinctrl-names = "default";
> +
> + eeprom: eeprom at 50 {
> + compatible = "24c02";
> + reg = <0x50>;
> + pagesize = <32>;
> + };
> + };
> + };
> +
> + gsbi at 16600000 {
> + status = "ok";
> + qcom,mode = <GSBI_PROT_I2C_UART>;
> + serial at 16640000 {
> + status = "ok";
> + };
> + };
> +
> + amba {
> + /* eMMC */
> + sdcc1: sdcc at 12400000 {
> + status = "okay";
> + };
> +
> + /* External micro SD card */
> + sdcc3: sdcc at 12180000 {
> + status = "okay";
> + };
> + /* WLAN */
> + sdcc4: sdcc at 121c0000 {
> + status = "okay";
> + };
> + };
> + };
> +};
>
--
Regards,
Igor.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-10-10 7:36 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-10-01 16:09 [PATCH v4] ARM: dts: qcom: add CM-QS600 board Mike Rapoport
2014-10-10 7:36 ` Igor Grinberg
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).