* [PATCH] remoteproc: stm32: clear MCU PDDS at firmware start
@ 2019-08-26 15:38 Fabien Dessenne
0 siblings, 0 replies; only message in thread
From: Fabien Dessenne @ 2019-08-26 15:38 UTC (permalink / raw)
To: Maxime Coquelin, Alexandre Torgue, Ohad Ben-Cohen,
Bjorn Andersson, linux-stm32, linux-arm-kernel, linux-kernel,
linux-remoteproc
Cc: Arnaud Pouliquen, Loic Pallardy, Fabien Dessenne
When remoteproc stops a firmware, it sets the MCU PDDS flag, allowing
the platform to reach the Standby power mode if needed.
Symmetrically, clear this flag before running a firmware.
This fixes the issue where the system goes to Standby mode when the
MCU crashes while MPU is in CSTOP mode.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
---
drivers/remoteproc/stm32_rproc.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
index e2da719..1c95913 100644
--- a/drivers/remoteproc/stm32_rproc.c
+++ b/drivers/remoteproc/stm32_rproc.c
@@ -383,10 +383,21 @@ static void stm32_rproc_add_coredump_trace(struct rproc *rproc)
static int stm32_rproc_start(struct rproc *rproc)
{
+ struct stm32_rproc *ddata = rproc->priv;
int err;
stm32_rproc_add_coredump_trace(rproc);
+ /* clear remote proc Deep Sleep */
+ if (ddata->pdds.map) {
+ err = regmap_update_bits(ddata->pdds.map, ddata->pdds.reg,
+ ddata->pdds.mask, 0);
+ if (err) {
+ dev_err(&rproc->dev, "failed to clear pdds\n");
+ return err;
+ }
+ }
+
err = stm32_rproc_set_hold_boot(rproc, false);
if (err)
return err;
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2019-08-26 15:42 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-26 15:38 [PATCH] remoteproc: stm32: clear MCU PDDS at firmware start Fabien Dessenne
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).