* [GIT PULL] qcom defconfig changes for v3.18
@ 2014-09-22 20:14 Kumar Gala
2014-09-25 22:32 ` Kumar Gala
2014-10-01 14:39 ` Arnd Bergmann
0 siblings, 2 replies; 3+ messages in thread
From: Kumar Gala @ 2014-09-22 20:14 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit 7d1311b93e58ed55f3a31cc8f94c4b8fe988a2b9:
Linux 3.17-rc1 (2014-08-16 10:40:26 -0600)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git tags/qcom-defconfig-for-3.18
for you to fetch changes up to 3b6357a79b7b0a2c3b31c5c92d5dd0c51cda0391:
ARM: qcom: Update defconfig (2014-09-22 13:59:08 -0500)
----------------------------------------------------------------
Qualcomm ARM Based defconfig Updates for v3.18
* General defconfig update to match upstream changes
* Enable IPQ806x & APQ8084 clk support
* Enable pinctrl on MSM8960 & APQ8084
* Enable CPU_IDLE to get basic wfi support
* Enable SPI NOR and MTD M25P80 support (used on AP148 board)
* Enable SATA PHY support on IPQ806x and APQ8064
* Enable Fixed regulator and ARM MMCI support (mmc support on APQ8064)
----------------------------------------------------------------
Kumar Gala (2):
ARM: qcom: Update defconfig
ARM: qcom: Update defconfig
arch/arm/configs/qcom_defconfig | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 3+ messages in thread
* [GIT PULL] qcom defconfig changes for v3.18
2014-09-22 20:14 [GIT PULL] qcom defconfig changes for v3.18 Kumar Gala
@ 2014-09-25 22:32 ` Kumar Gala
2014-10-01 14:39 ` Arnd Bergmann
1 sibling, 0 replies; 3+ messages in thread
From: Kumar Gala @ 2014-09-25 22:32 UTC (permalink / raw)
To: linux-arm-kernel
On Sep 22, 2014, at 3:14 PM, Kumar Gala <galak@codeaurora.org> wrote:
> The following changes since commit 7d1311b93e58ed55f3a31cc8f94c4b8fe988a2b9:
>
> Linux 3.17-rc1 (2014-08-16 10:40:26 -0600)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git tags/qcom-defconfig-for-3.18
>
> for you to fetch changes up to 3b6357a79b7b0a2c3b31c5c92d5dd0c51cda0391:
>
> ARM: qcom: Update defconfig (2014-09-22 13:59:08 -0500)
>
> ----------------------------------------------------------------
> Qualcomm ARM Based defconfig Updates for v3.18
>
> * General defconfig update to match upstream changes
> * Enable IPQ806x & APQ8084 clk support
> * Enable pinctrl on MSM8960 & APQ8084
> * Enable CPU_IDLE to get basic wfi support
> * Enable SPI NOR and MTD M25P80 support (used on AP148 board)
> * Enable SATA PHY support on IPQ806x and APQ8064
> * Enable Fixed regulator and ARM MMCI support (mmc support on APQ8064)
>
> ----------------------------------------------------------------
> Kumar Gala (2):
> ARM: qcom: Update defconfig
> ARM: qcom: Update defconfig
>
> arch/arm/configs/qcom_defconfig | 14 ++++++++++----
> 1 file changed, 10 insertions(+), 4 deletions(-)
ping.
- k
--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 3+ messages in thread
* [GIT PULL] qcom defconfig changes for v3.18
2014-09-22 20:14 [GIT PULL] qcom defconfig changes for v3.18 Kumar Gala
2014-09-25 22:32 ` Kumar Gala
@ 2014-10-01 14:39 ` Arnd Bergmann
1 sibling, 0 replies; 3+ messages in thread
From: Arnd Bergmann @ 2014-10-01 14:39 UTC (permalink / raw)
To: linux-arm-kernel
On Monday 22 September 2014, Kumar Gala wrote:
> Qualcomm ARM Based defconfig Updates for v3.18
>
> * General defconfig update to match upstream changes
> * Enable IPQ806x & APQ8084 clk support
> * Enable pinctrl on MSM8960 & APQ8084
> * Enable CPU_IDLE to get basic wfi support
> * Enable SPI NOR and MTD M25P80 support (used on AP148 board)
> * Enable SATA PHY support on IPQ806x and APQ8064
> * Enable Fixed regulator and ARM MMCI support (mmc support on APQ8064)
This seems harmless, so I've pulled it into next/defconfig now.
Sorry for the delay, I basically stopped pulling anything that only
came in last week when it seemed that we'd have merge window opening
already.
Arnd
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-10-01 14:39 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-09-22 20:14 [GIT PULL] qcom defconfig changes for v3.18 Kumar Gala
2014-09-25 22:32 ` Kumar Gala
2014-10-01 14:39 ` Arnd Bergmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).