From: linux@arm.linux.org.uk (Russell King - ARM Linux)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 03/16] tty: serial: 8250_core: read only RX if there is something in the FIFO
Date: Fri, 13 Feb 2015 23:15:19 +0000 [thread overview]
Message-ID: <20150213231519.GF8670@n2100.arm.linux.org.uk> (raw)
In-Reply-To: <20150213185115.GF5482@linutronix.de>
On Fri, Feb 13, 2015 at 07:51:16PM +0100, Sebastian Andrzej Siewior wrote:
> Something like this maybe?
My personal feeling is that as 0aa525d11859 was wrong, it should be
reverted and this should be another attempt to fix the problem. In
other words, there should be two patches, one a revert of the previously
known bad commit and this one having another go at it.
I feel that would be a better approach, since then we don't end up
with this change building on a previously know buggy change. It
would also make the changes to this solution from the previous,
known-to-work-for-decades code more obvious.
--
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.
next prev parent reply other threads:[~2015-02-13 23:15 UTC|newest]
Thread overview: 97+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-10 19:29 [PATCH 00/16 v9] omap 8250 based uart + DMA Sebastian Andrzej Siewior
2014-09-10 19:29 ` [PATCH 01/16] tty: serial: 8250_core: allow to set ->throttle / ->unthrottle callbacks Sebastian Andrzej Siewior
2014-09-10 19:29 ` [PATCH 02/16] tty: serial: 8250_core: add run time pm Sebastian Andrzej Siewior
2014-09-29 9:46 ` Frans Klaver
2014-09-29 13:39 ` Sebastian Andrzej Siewior
2014-09-10 19:29 ` [PATCH 03/16] tty: serial: 8250_core: read only RX if there is something in the FIFO Sebastian Andrzej Siewior
2015-02-09 13:34 ` Nicolas Schichan
2015-02-09 23:34 ` Peter Hurley
2015-02-10 9:32 ` Sebastian Andrzej Siewior
2015-02-10 12:04 ` Nicolas Schichan
2015-02-10 17:46 ` Peter Hurley
2015-02-11 20:01 ` Peter Hurley
2015-02-11 20:03 ` Tony Lindgren
2015-02-11 20:42 ` Peter Hurley
2015-02-12 8:45 ` Sebastian Andrzej Siewior
2015-02-12 9:40 ` Russell King - ARM Linux
2015-02-12 16:32 ` Peter Hurley
2015-02-12 19:23 ` Sebastian Andrzej Siewior
2015-02-12 19:55 ` Peter Hurley
2015-02-12 20:34 ` Sebastian Andrzej Siewior
2015-02-13 18:51 ` Sebastian Andrzej Siewior
2015-02-13 23:15 ` Russell King - ARM Linux [this message]
2015-02-15 17:32 ` [PATCH] serial: 8250: Revert "tty: serial: 8250_core: read only RX if there is something in the FIFO" Sebastian Andrzej Siewior
2015-05-12 20:25 ` Tony Lindgren
2014-09-10 19:29 ` [PATCH 04/16] tty: serial: 8250_core: use the ->line argument as a hint in serial8250_find_match_or_unused() Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 05/16] tty: serial: 8250_core: remove UART_IER_RDI in serial8250_stop_rx() Sebastian Andrzej Siewior
2014-09-11 11:19 ` Heikki Krogerus
2014-09-10 19:30 ` [PATCH 06/16] tty: serial: Add 8250-core based omap driver Sebastian Andrzej Siewior
2014-09-11 11:57 ` Peter Hurley
2014-09-16 17:01 ` Sebastian Andrzej Siewior
2014-09-29 9:38 ` Frans Klaver
2014-09-29 13:27 ` Sebastian Andrzej Siewior
2014-09-29 13:34 ` Frans Klaver
2014-09-10 19:30 ` [PATCH 07/16] tty: serial: 8250_dma: handle error on TX submit Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 08/16] tty: serial: 8250_dma: enqueue RX dma again on completion Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 09/16] tty: serial: 8250_dma: Add a TX trigger workaround for AM33xx Sebastian Andrzej Siewior
2014-09-11 11:17 ` Heikki Krogerus
2014-09-11 11:42 ` Sebastian Andrzej Siewior
2014-09-11 12:32 ` Peter Hurley
2014-09-11 12:50 ` Sebastian Andrzej Siewior
2014-09-11 14:35 ` Peter Hurley
2014-09-15 17:01 ` Sebastian Andrzej Siewior
2014-09-16 16:55 ` Sebastian Andrzej Siewior
2014-09-17 12:20 ` Peter Hurley
2014-09-17 16:25 ` Sebastian Andrzej Siewior
2014-09-29 16:15 ` Sebastian Andrzej Siewior
2014-09-11 15:11 ` Frans Klaver
2014-09-11 16:04 ` Sebastian Andrzej Siewior
2014-09-11 17:04 ` Frans Klaver
2014-09-12 7:23 ` Sebastian Andrzej Siewior
[not found] ` <20140912094010.GE28458@ci00147.xsens-tech.local>
2014-09-12 9:51 ` Sebastian Andrzej Siewior
2014-09-12 10:28 ` Frans Klaver
2014-09-15 16:42 ` Sebastian Andrzej Siewior
2014-09-16 9:05 ` Frans Klaver
2014-09-16 12:42 ` Frans Klaver
2014-09-16 14:23 ` Frans Klaver
2014-09-17 10:28 ` Frans Klaver
2014-09-21 20:41 ` Sebastian Andrzej Siewior
2014-09-22 9:28 ` Frans Klaver
2014-09-24 7:56 ` Sebastian Andrzej Siewior
2014-09-25 15:14 ` Sebastian Andrzej Siewior
2014-09-25 15:18 ` Frans Klaver
2014-09-29 8:50 ` Frans Klaver
2014-09-29 9:54 ` Sebastian Andrzej Siewior
2014-09-29 10:30 ` Frans Klaver
2014-09-30 8:44 ` Frans Klaver
2014-10-02 10:27 ` Sebastian Andrzej Siewior
2014-10-13 14:55 ` Frans Klaver
2014-09-23 17:03 ` Peter Hurley
2014-09-24 7:53 ` Sebastian Andrzej Siewior
2014-09-25 10:42 ` Sebastian Andrzej Siewior
2014-09-25 11:31 ` Peter Hurley
2014-09-25 13:11 ` Sebastian Andrzej Siewior
2014-09-17 16:34 ` Sebastian Andrzej Siewior
2014-09-19 10:22 ` Heikki Krogerus
2014-09-19 10:58 ` Sebastian Andrzej Siewior
2014-09-19 11:25 ` Peter Hurley
2014-09-22 7:46 ` Heikki Krogerus
2014-09-25 9:24 ` Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 10/16] tty: serial: 8250_dma: optimize the xmit path due to UART_BUG_DMA_TX Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 11/16] tty: serial: 8250_dma: keep own book keeping about RX transfers Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 12/16] tty: serial: 8250_dma: handle the UART RDI event while DMA remains idle Sebastian Andrzej Siewior
2014-09-29 9:23 ` Frans Klaver
2014-09-10 19:30 ` [PATCH 13/16] tty: serial: 8250_dma: add pm runtime Sebastian Andrzej Siewior
2014-09-29 9:26 ` Frans Klaver
2014-09-29 9:56 ` Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 14/16] arm: dts: am33xx: add DMA properties for UART Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 15/16] arm: dts: dra7: " Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 16/16] tty: serial: 8250: omap: add dma support Sebastian Andrzej Siewior
2014-09-12 22:43 ` [PATCH 00/16 v9] omap 8250 based uart + DMA Tony Lindgren
2014-09-15 11:50 ` Sebastian Andrzej Siewior
2014-09-16 12:57 ` Sebastian Andrzej Siewior
2014-09-16 16:48 ` Tony Lindgren
2014-09-16 21:30 ` Tony Lindgren
2014-09-17 8:38 ` Sebastian Andrzej Siewior
2014-09-17 9:05 ` Sebastian Andrzej Siewior
2014-09-26 16:02 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150213231519.GF8670@n2100.arm.linux.org.uk \
--to=linux@arm.linux.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).